Manual 3060 System - SimonsVoss technologies

Manual – Digital Half Cylinder 3061
Page 2
1. General ________________________________________________________ 4
1.1 Notes on safety ___________________________________________ 4
1.2 Product description _______________________________________ 5
1.3 Design __________________________________________________ 5
1.4 Opening and closing ______________________________________ 5
2. Versions _______________________________________________________ 6
2.1 Standard version__________________________________________ 6
2.2 ZK version _______________________________________________ 6
2.3 WP version ______________________________________________ 6
2.4 Overlengths______________________________________________ 7
3. Programming and configuration ___________________________________ 7
3.1 Access Control ___________________________________________ 7
3.2 Time zone control _________________________________________ 8
3.3 Overlay Modus ___________________________________________ 8
3.4 Extended activation _______________________________________ 8
3.5 OMRON _________________________________________________ 8
3.6 Warehouse mode _________________________________________ 8
3.7 No acoustic programming confirmation ______________________ 8
3.8 Logging unauthorised access attempts_______________________ 9
3.9 Time-switch function ______________________________________ 9
3.10 Flip-Flop_______________________________________________ 10
4. Status reports _________________________________________________ 11
4.1 Battery condition critical __________________________________ 11
4.2 Emergency battery activated_______________________________ 11
4.3 Deactivated _____________________________________________ 11
4.4 Emergency switch activated _______________________________ 12
4.5 Time-controlled opening active_____________________________ 12
4.6 Engaged________________________________________________ 12
5. Installation instructions _________________________________________ 13
5.1 General notes ___________________________________________ 13
5.2 Programming the half cylinder _____________________________ 13