INFLATIONS - Coburn
INFLATIONS - Coburn
INFLATIONS - Coburn
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
®<br />
<strong>INFLATIONS</strong><br />
Designed by<br />
Specialists<br />
for Exceptional<br />
Performance
Experience<br />
Since 1933, Maes has been designing and producing superior milker inflations for the<br />
dairy industry. Maes designers know that dairy producers depend on their inflations for<br />
thorough, gentle, timely and consistent milkout, from cow to cow, from milking to milking,<br />
from the first day throughout the life of the inflation.<br />
Years of experience have trained us to pay attention to all the elements that go into an<br />
excellent milker inflation. The rubber/polymer mix must have the correct characteristics<br />
of strength, compression, smooth finish, and elasticity. From the mouth to the bore<br />
to the milk tube, inflation shape, size and dimension must be properly proportioned to<br />
allow problem-free flow between the cow and the milk collecting system. From cow to<br />
cow, from milking to milking, from the first day throughout the life of the inflation.<br />
Quality<br />
We are confident that the materials, manufacture, testing and quality control of Maes<br />
inflations are unsurpassed in the industry. Maes inflations are compounded of the<br />
finest quality raw materials, with an optimum level of natural rubber to balance milking<br />
speed with gentleness. Pure rubber is combined with polymers and additives which<br />
address specific needs. Some additives help the inflation resist distortion which age<br />
and milk fat can cause while others contribute to a smooth finish for cleanability or help<br />
to soften the material for enhanced suppleness and gentle milking. Our formulas aim<br />
to balance the characteristics of safety, performance and cleanability to satisfy our priorities<br />
in inflation design.<br />
The Maes manufacturing process assures quality at every stage. Only the highest<br />
standards are acceptable in raw material, personnel, equipment condition, and cleanliness.<br />
Maes practices aggressive quality control at every step to assure the producer’s<br />
new set of inflations is identical to the set being replaced. Before coming to market, a<br />
new inflation, such as the Tri-Magna triangular inflation, is extensively field and lab<br />
tested for the all-important attributes of gentleness, performance, and quality.<br />
Innovation<br />
Maes is known as the “Problem Solver” in the inflation business because of our specialty<br />
in addressing specific problems such as drop-off, slippage or incomplete milkout.<br />
For example, the Magnaflex M226 has a bore which narrows down gradually to a<br />
wide milk tube resulting in a much smoother milk flow and less chance of back flow.<br />
Maes Tri-Magna styles, available for Surge, Delaval or Bou-Matic milking systems,<br />
combine our custom rubber blend formulation with an innovative triangular bore. This<br />
gives a uniform, gentle, three-sided rather than two-sided massage on the teat. The<br />
triangular bore improves grip especially toward the end of the milking period when the<br />
flattened empty teat is more susceptible to slips and drop-offs.
Anatomy of an Inflation<br />
the mouthpiece<br />
The opening at the top of the inflation should be<br />
the appropriate size for the cows. If the mouthpiece<br />
is too large, small teats can be<br />
sucked down into the bore. If too small, the inflation<br />
makes a poor attachment which can be costly<br />
in time, udder health, and lost milk.<br />
the head<br />
The head is designed to fit the milking shell snugly<br />
and securely in order to eliminate slips,<br />
squawks, and deforming.<br />
the vacuum chamber<br />
The space inside the head is proportioned to provide<br />
the correct reservoir of vacuum around the<br />
teat, resulting in a secure attachment.<br />
the bore<br />
The bore flexes with the vacuum pulsations to<br />
massage the teat and release the milk. This is<br />
where Maes’ super-soft formula is most appreciated<br />
in gentleness, cow<br />
comfort, and udder health.<br />
the rings<br />
Several Maes styles, including the M226<br />
Magnaflex Inflation for Delaval 06 shell shown<br />
here, feature a series of three positions for shell<br />
fit. The first ring provides the least tension on the<br />
bore for good flex in low vacuum situations. The<br />
second position creates a little more tension and<br />
is good for cows with small teats. The third position<br />
provides the proper tension on the bore for<br />
top performance in high level vacuum systems.<br />
the milk tube<br />
A well-designed, tapered milk tube quickly carries<br />
the milk away without flooding the claw.<br />
the claw end<br />
Most styles of Maes inflations feature a reinforced<br />
claw end to minimize cuts caused by the rubber<br />
flexing against the stainless steel claw nipples.<br />
Claw end reinforcement contributes to longer life,<br />
lower replacement costs<br />
and higher profits.<br />
®
®<br />
The Maes story began in 1911 with Bob Maes, a<br />
young inventor working on a dairy farm with the<br />
crude milking equipment in use at the time. He<br />
visualized more practical, safe, and efficient ways<br />
to milk cows and he began to patent and produce<br />
inventions which soon proved their worth with top<br />
dairy herds. Over the years, the creative spirit of<br />
Bob Maes has been kept alive with innovations in<br />
design, materials and manufacturing processes.<br />
The Maes brand was acquired by The <strong>Coburn</strong> Co.,<br />
Inc. of Whitewater, Wisconsin, in July of 1996. A<br />
family business with a long history of its own,<br />
<strong>Coburn</strong> has been manufacturing and distributing<br />
livestock supplies and milking equipment since<br />
1925. <strong>Coburn</strong> has earned a reputation for superior<br />
customer service throughout its widespread<br />
dealer network. That reputation now stands solidly<br />
behind the Maes brand.<br />
Maes inflations are available for all<br />
major brands of milking equipment.<br />
Ask your dealer for more information<br />
about Maes inflations.<br />
Your Maes Dealer<br />
Maes Inflations are manufactured for THE COBURN CO., INC.<br />
P.O. Box 147 • Whitewater, Wisconsin 53190 USA<br />
Phone: 262- 473-2822 • Fax: 262- 473-3522 • www.coburn.com
®<br />
<strong>INFLATIONS</strong><br />
Maes is a registered trademark of THE COBURN COMPANY, INC.<br />
Delaval-style<br />
M227<br />
Tri-Magna<br />
Narrow Bore for<br />
06 shell<br />
Triangular bore<br />
gives a three-sided<br />
massage for<br />
thorough milkout,<br />
good attachment,<br />
and gentleness.<br />
Flat smooth head<br />
has no ribs at top<br />
to trap bacteria.<br />
Replaces Milk-Rite<br />
TLC-D1.<br />
M700<br />
SQUARE<br />
Inflation for<br />
06 shell<br />
Square bore<br />
inflation has a 4-<br />
way collapsing<br />
action for most<br />
uniform massage<br />
and complete<br />
milk-out.<br />
M701<br />
SQUARE<br />
Inflation with<br />
Air Vent for<br />
06 shell<br />
Square bore<br />
inflation has a 4-<br />
way collapsing<br />
action for most<br />
uniform massage<br />
and complete<br />
milk-out.<br />
Includes small<br />
plastic air vent<br />
(p/n 4010001).<br />
M226<br />
Magnaflex<br />
Narrow Bore<br />
replaces 01, 08<br />
for 06 shell<br />
A thin-wall<br />
high-capacity<br />
inflation. Lower<br />
positioning on the<br />
teat and extra<br />
tube length suit<br />
wide-uddered<br />
cows.<br />
M224<br />
Style D Narrow<br />
Bore replaces<br />
01 for 06 shell<br />
Firm mouthpiece<br />
and rounded<br />
dome for good<br />
teat and udder<br />
contact, reduced<br />
slippage.<br />
M220<br />
Style D<br />
Medium Bore<br />
replaces 05<br />
for 06 shell<br />
With large<br />
mouthpiece,<br />
ideal for large<br />
or swollen<br />
teats.<br />
M6000<br />
Magnaflex<br />
Narrow Bore replaces<br />
08,<br />
01AULT for 06<br />
shell<br />
Special flex joint<br />
at top of milk tube<br />
for improved<br />
shape retention<br />
and best alignment<br />
under the<br />
udder. Head<br />
designed for<br />
secure teat contact.<br />
Works with all<br />
ranges of vacuum.<br />
M4000-1020<br />
Magnaflex Narrow<br />
Bore replaces 01, 01U,<br />
01AU for 06 shell<br />
Thin wall provides<br />
good teat massage. Suits<br />
low-line systems and DV-<br />
300. Good for lower<br />
vacuum levels. Special<br />
fast-milking New<br />
Zealand style rubber<br />
formulation.<br />
Replacement for<br />
Conewango ID-01A.
®<br />
<strong>INFLATIONS</strong><br />
BouMatic-style<br />
M411<br />
Tri-Magna Narrow<br />
Bore for Standard<br />
S.S. Shell<br />
Triangular bore<br />
gives a three-sided<br />
massage producing<br />
gentle, thorough<br />
milkout and reduced<br />
slippage. Smooth<br />
domed head – no ribs<br />
to trap bacteria.<br />
Replaces Milk-Rite<br />
TLC-B1.<br />
M406<br />
DKBM<br />
Narrow Bore<br />
replaces F1, R1, P1<br />
for Standard S.S.<br />
Shell.<br />
Narrow bore has<br />
rings for tension<br />
adjustment. Head<br />
positions slightly<br />
higher on the teat.<br />
M5000<br />
Magnaflex<br />
Narrow Bore<br />
replaces B1U, R1,<br />
R1C for Standard<br />
S.S. Shell<br />
For high capacity<br />
claws. With more<br />
stable mouthpiece, it<br />
is ideal for low<br />
vacuum situations.<br />
Milk tube reinforcement<br />
is effective<br />
against claw cuts.<br />
M1000<br />
Magnaflex<br />
Narrow Bore<br />
replaces B1U, R1,<br />
R1C for Standard<br />
S.S. Shell<br />
Ideal for efficient<br />
milking in lower<br />
vacuum situations<br />
or where drop-off is<br />
a problem. Adjusting<br />
rings for<br />
tension on the bore.<br />
M410<br />
Narrow Bore<br />
replaces R2 for S.S.<br />
shell with plastic<br />
nipple<br />
This inflation<br />
works with the<br />
M409 Tube and is<br />
designed for best fit<br />
in the S.S. shell.<br />
Replacement for<br />
original R-2CS.<br />
M409<br />
51/2” Tapered<br />
Reinforced Rubber<br />
Milk Tube<br />
Now improved<br />
with extra rubber<br />
at the tube end for<br />
strength and shape;<br />
used with M410.
®<br />
<strong>INFLATIONS</strong><br />
Surge-style<br />
M286<br />
Tri-Magna<br />
Narrow Bore for<br />
Jet-Flo shell<br />
Tri-Magna<br />
triangular<br />
inflation gives<br />
three-sided<br />
massage for<br />
gentle, thorough<br />
milkout, and<br />
reduced slips<br />
and squawks.<br />
Ring-style reinforcement<br />
at<br />
milk tube helps<br />
resist claw cuts<br />
and aids shutoff.<br />
For Mini-<br />
Orbit, Eclipse or<br />
RX claw.<br />
Replaces Milk-<br />
Rite TLC-S1.<br />
M287<br />
Narrow Bore<br />
replaces 10060,<br />
10062 for Jet-<br />
Flo shell<br />
Head is reinforced<br />
at<br />
mouthpiece and<br />
shoulder for<br />
greater<br />
stability.<br />
Longer milk<br />
tube with extra<br />
reinforcement to<br />
guard against<br />
claw cuts.<br />
Our exclusive<br />
compound<br />
features durability,<br />
gentle yet<br />
fast milking.<br />
M288<br />
Narrow Bore<br />
replaces 10060,<br />
10062 for Jet-Flo<br />
shell<br />
The M288 has<br />
a slightly larger<br />
curved shape at<br />
the contact point<br />
with the shell<br />
bottom , and is a<br />
fraction longer<br />
than the M287.<br />
Features same<br />
exclusive rubber<br />
compound.<br />
M221<br />
With Rings.<br />
Style A-S Narrow<br />
Bore<br />
replaces 10057,<br />
10058, 10100,<br />
10063 for<br />
Vacuum Saver<br />
shells<br />
For Breaker<br />
Cup or Mini-<br />
Cup claw. Flat<br />
dome head<br />
rides higher on<br />
the teat for<br />
good udder<br />
contact. Multiadjustable<br />
tension<br />
rings.<br />
M284<br />
Without<br />
Rings.<br />
Style A-S<br />
Narrow Bore<br />
replaces<br />
10057, 10058,<br />
10100, 10063<br />
for Vacuum<br />
Saver shells<br />
For Breaker<br />
Cup or Mini-<br />
Cup claw.<br />
Flat dome<br />
head rides<br />
higher on the<br />
teat for good<br />
udder contact.<br />
M285<br />
Style A-S replaces<br />
10041, 10048, 10049<br />
for Jet-Flo shell<br />
For Mini-Orbit,<br />
Eclipse or RX claw.<br />
Ring-style reinforcement<br />
at milk tube<br />
helps resist claw<br />
cuts, aids shut-off.<br />
M282<br />
Style A-S Medium<br />
Bore replaces<br />
10052, 10084 for<br />
Continental shell<br />
Large mouthpiece<br />
for largeteated<br />
cows.
®<br />
<strong>INFLATIONS</strong><br />
Universal<br />
style<br />
Choreboy<br />
style<br />
M275<br />
Narrow Bore<br />
replaces 281,<br />
282 for Visible<br />
shell<br />
Shorter milk<br />
tube with<br />
smaller I.D.<br />
For Fullview<br />
Claw.<br />
M274<br />
Style U Narrow Bore<br />
replaces 6R, 6S2,<br />
26M, 6M for UNIV<br />
2MS shell<br />
Narrow round bore<br />
positions correctly on<br />
the teat. Rings for<br />
adjusting tension on<br />
the bore. Smaller ID<br />
milk tube. Not a<br />
replacement for precollapsed<br />
design of<br />
original 6S.<br />
M215<br />
CHC-KF replaces 12051<br />
Kleen-Flo for narrow<br />
bore shell<br />
Long, reinforced milk<br />
tube for high capacity<br />
with flexibility.<br />
Streamlined head<br />
shape. Rings for tension<br />
adjustment on the bore.<br />
Collapsing Patterns of Milker Inflations<br />
Traditional Round Shape Triangular Shape Square Shape<br />
for two-way massage for three-way massage for four-way massage<br />
®<br />
<strong>INFLATIONS</strong><br />
Maes is a registered trademark of THE COBURN COMPANY, INC.<br />
P.O. Box 147 • Whitewater, Wisconsin 53190 USA<br />
Phone 262-473-2822 • Fax 262-473-3522<br />
www.coburn.com<br />
Toll-free Phone 1-800-776-7042 • Fax 1-800-776-7044<br />
MI2009