Download - METZNER Maschinenbau GmbH

the correct tool
Choosing the correct tool is as important for a good cutting result as the choice of
the cutting machine itself. The cutting method, the cutting force and the form of the
knife must all be right for the material and the processing requirements so that they
are matched perfectly to the particular task in hand.
The basic idea: Choose the right machine for your application from eight different cutting technologies
or even equip one machine with several tools for various tasks. The MBS range offers you
the possibilities you are looking for: die cut, shear cut, tube cut, draw cut, hot cut and rotation
cut. For applications that demand more than just cutting to length, there are cutting tools with
stamped or cut-out contours or drilling tools. And there’s the option to combine a number of tools
in one machine to carry out more than one function in parallel or sequentially – the MBS range
makes it possible.
As a complete systems supplier, Metzner develops and manufactures all its own tooling, enabling
us to guarantee short delivery times and ensure the appropriate matching of tooling to processing
requirements.
technical data
Performance Data
Material dimension width max.
Material dimension height max.
Feeding speed max.
Metzner MBS 100
100mm
30mm, 80mm 1)
60 m/min, 120 m/min 1)
Metzner MBS 200
200mm
30mm, 80mm 1)
60 m/min, 120 m/min 1)
Metzner MBS 400
400mm
30mm, 80mm 1)
60 m/min, 120 m/min 1)
Cutting rate 2)
Size increments
Typical repeatability exactness 3)
170 cuts/min
0.1mm
± 0.2%
170 cuts/min
0.1mm
± 0.2%
130 cuts/min
0.1mm
± 0.2%
Technical Data
Electrical connection
Compressed air connection
Dimensions (LxWxH)
Weight
230 V, 50/60 Hz, 10 A
6 bar
Depending on equipment
Depending on equipment
230 V, 50/60 Hz, 10 A
6 bar
Depending on equipment
Depending on equipment
230 V, 50/60 Hz, 10 A
6 bar
Depending on equipment
Depending on equipment
Available Cutting Technologies
Die cut
Shear cut
Tube cut
Drawing cut
Hot cut
Rotation cut
Contour cut
•
•
•
•
•
•
•
•
•
-
•
•
•
•
•
•
-
•
-
•
-
Drilling
•
•
•
1)
available as option | 2) at cutting length 5mm | 3) depending on material; tolerance min. ± 0.5mm | • = standard, - = not available | Specifications are subject to change without notice.
7