Download - METZNER Maschinenbau GmbH

take-off and winding
w e l l o r d e r e d a n d d a m a g e - f r e e h a n d l i n g o f s e n s i t i v e p a r t s
After the rubber and plastics processing, precise take-off,
sorting or coiling of the products is a logical step in the quality
assurance of the total process. For this reason, our take-off
and winding units have the task of carefully laying the finished
parts tidily in collecting trays.
We differentiate between take-off units with cross conveyors – also
known as lateral discharge units – and those without cross conveyors.
To increase length precision, Metzner take-off units can be fitted with
an end-sensing function, whereby the cut is made precisely at a point
that is monitored by a sensor. The take-off of the parts is performed,
depending on the material, either by a pusher, a brush device or fully
contact-free with compressed air. Metzner take-offs are available in
lengths of 1m to 5m.
Professional Cross Conveyor
• High-speed take-off by double throw-off
• Take-off possible to front and rear
• Integral end-sensing
Economy Cross Conveyor
• Attractive price
• Take-off to front
• Stand-alone unit with no installation expense
»Easy-Lift« Take-Off cross Conveyor
• Profiles are carried »super-soft« onto the
lateral belt, not pushed
• Take-off to front
Professional Take-Off Unit
• Take-off forwards with guide channel
• Integral end-sensing
• Pneumatic lift function for control and immediate
fault correction
Economy Take-Off Unit
• Take-off to front with push-off
• End-sensing available as option
• Take-off to front
Metzner tube coiler
• Tube ring winder for tubes up to 350mm
diameter
• With built-in tension monitoring and tension
control to avoid material stretch
• Mandrels can be lowered for easy unloading
32