Download - METZNER Maschinenbau GmbH

eccentric drive
cutting machines
h i g h - p e r f o r m a n c e d i e c u t
If a die cut at very high speed is required and the pneumatic
drive has reached its limit, the eccentric-drive cut opens new
possibilities in terms of cutting performance.
The basic idea: With the Metzner ST 25, instead of a pneumatically
technical data
driven cutting tool, we use an electrically-driven eccentric mechanism
bearing the cutting tool. In this way, we can achieve ground-breaking
guillotine cutting performance of up to 800 cuts/minute.
A beneficial side effect: the electric drive enables the ST 25 to work
very quietly, making this model the choice for customers in low-noise
environments.
For the eccentric-drive machines, we offer the interesting »Red – Green –
Performance Data
Material dimension width max.
Material dimension height max.
Feeding speed
Size increments
Typical repeatability exactness 1)
Technical Data
Electrical connection
Dimensions (LxWxH)
Weight
Metzner ST 25
100mm
25mm
60 m/min
0.1mm
± 0.2%
3~400 V, 50 / 60 Hz, 10 A
1700 x 800 x 1600mm
450 kg
Blue« equipment levels with the following features:
Red: PLC-controls with 2-line display; max. cutting speed 400 cuts/
minute.
Green: Metzner PLC-controls with touch-screen and CoDeSys programming;
cutting speed max. 400 cuts/minute.
Red-Green-Blue Equipment Level
Cutting rate/min 2)
Controls
Integral interface for peripheral equipment
Length measuring system
Printing with ink-jet printer
Control via PC and Software
Integration into factory IT network
Red
400
SPS 3)
-
•
-
-
-
Green
400
SPS 4)
•
•
•
•
•
Blue
800
L-SPS 5)
•
•
•
•
•
Blue: Lenze PLC-controls with touch-screen and CoDeSys programming;
cutting speed max. 800 cuts/minute.
1)
depending on material; tolerance min. ± 0.5mm | 2) at cutting length 5mm
3)
PLC-controls with 2-line-display | 4) Metzner PLC-controls with 5.7” colour
touch-screen and CoDeSys programming | 5) Lenze PLC-controls with 5.7”
colour touch-screen and CoDeSys programming
• = standard, - = not available | Specifications are subject to change without notice.
12