USER MANUAL FOR F.I.O. INSTALLATION - Pietro Fiorentini

More documents

Recommendations

Info

4 7 F.I.O. User’s Manual ENGLISH F.I.O. User Manual – Ed.2. Rev.5 Page 6/ 53 The information contained in this document is confidential and the property of Pietro Fiorentini S.p.A. Technical data may undergo changes without notice 8 10 11 regulator 12 13 5 14 Stroke of 6 9 15
2.2 ECU Electronic Control Unit 2.2.1 Installation on board of the regulator: F.I.O. User’s Manual This configuration is required in case of indirect measurement of flow rate. The application Q-kit includes the bracket and the screws necessary for the fixing of the ECU. Furthermore it includes the cable for the connection of the displacement transducer to the ECU. Pict 1- Prepare the screws with the nut screwed on the bracket. Pict 2- Install the ECU and fix the screws Pict 3- Remove one of the small fairleads. Bring the cable for the connection of the displacement transducer to the ECU. There is a fairlead already assembled on it. Remove the fixing nut of the fairlead. Pass the white connector through the threaded hole. Pict 4- Insert the fixing nut of the fairlead through the connector and fix the nut on the fairlead. Pict 5- Insert the connector on the card Pict 6- From the other side of the cable screw the male connector on the female connection of the transducer. ENGLISH 1 2 3 4 5 6 F.I.O. User Manual – Ed.2. Rev.5 Page 7/ 53 The information contained in this document is confidential and the property of Pietro Fiorentini S.p.A. Technical data may undergo changes without notice
Page 1 and 2: F.I.O. User’s Manual F.I.O. USER
Page 3 and 4: F.I.O. User’s Manual ENGLISH 7.2
Page 5: F.I.O. User’s Manual 2. Installat
Page 9 and 10: 2.3 P-kit The pilot P-kit is instal
Page 11 and 12: 3. Connections PROCEDURE STEP 2: F.
Page 13 and 14: F.I.O. User’s Manual 3.2.5 Connec
Page 15 and 16: 3.2.5.3 ECU B 2 nd stream version (
Page 17 and 18: 3.2.5.5 Detail of connections on th
Page 19 and 20: 4.2.2 External supply 230 Vac F.I.O
Page 21 and 22: F.I.O. User’s Manual 6- Insert th
Page 23 and 24: F.I.O. User’s Manual 5.2 Measurem
Page 25 and 26: F.I.O. User’s Manual 6. Basic con
Page 27 and 28: 7.1.1.1 Master Table Here are displ
Page 29 and 30: 7.1.2 ECU F.I.O. User’s Manual EN
Page 31 and 32: 7.1.2.4 Event In the page “Event
Page 33 and 34: 7.1.2.8 Commissioning of the system
Page 35 and 36: 7.1.2.12 Pressure compensation The
Page 37 and 38: 7.2.1 Alarm configuration Enter the
Page 39 and 40: F.I.O. User’s Manual ENGLISH ENCL
Page 41 and 42: B.2 ECU B.2.1 Export of ECU configu
Page 43 and 44: F.I.O. User’s Manual ENGLISH ENCL
Page 45 and 46: F.I.O. User’s Manual ENCLOSURE D
Page 47 and 48: F.I.O. User’s Manual ENCLOSURE E
Page 49 and 50: F.I.O. User’s Manual Code (1) ELE
Page 51 and 52: F.I.O. User’s Manual Code KIT FOR
Page 53: OTHER 3 F.I.O. User’s Manual 1 2

USER MANUAL FOR F.I.O. INSTALLATION - Pietro Fiorentini

Create successful ePaper yourself

Delete template?

Save as template?