Love system brochure GB - DeguDent

“ I am excited about the easy handling and the aesthetics
of the ceramic material. It is very simple to shape, grind
and cut, allowing me to produce beautiful ceramic veneers,
again and again. The surface fi nish and shade reproduction
of the ceramic material are unrivalled.”
Malek Misrabi, Freiburg, Germany, Master Dental Technician
Your benefits
It is used for quickly and safely veneering crowns and
bridges made of non-precious alloys, high-gold alloys and
bio alloys with a CTE range of 13.8 – 14.9 (500 °C).
In addition, Duceram love can be utilized for veneers on
Ducera press frameworks using the cutback technique.
135º Duceram love
143 Dentin 1
840º
135º
02:00
500º
02:00 03:24 01:30
03:00
50,0 µm
Very short firing
Ultra-fine
Distortion-free
Increased
times
microstructure
veneers
cost efficiency
The unique composition of the
The overall stability on all
The low firing temperature
Duceram love is suitable for
material allows heating rates
alloys of the specified CTE
(900 °C) of the Paste Opaque /
veneering Ducera press frame-
of 100 °C/min and rapid cool-
range is ensured by the ultra-
Liner helps avoid bio alloy
works using the cutback
ing (precious metal alloys). It
fi ne microstructure of the ma-
framework distortion, so that
technique, which increases
takes less than an hour to fi re
terial with its homogeneously
even these alloys can be
its economic appeal.
a crown
distributed globular leucite
veneered without problems.
crystals.
17