COVER - Encompass Imaging

DCR-TRV12E/TRV14E/TRV19/TRV19E
2-13. LB-085 BOARD (REMOVING OF THE EVF)-3
Caution
When attach the Sheet (VF),
fold the flexible board of the
LCX032AN-5 as shown in
the illustration.
Sheet (VF)
Flexible board of the
LCX032AN-5
B
1 Two screws
(M1.7 × 2.5),
lock ace, p2
2 Pull out the VF slide assembly fully
in the direction of the arrow.
VF slide Cabinet (upper) assembly
VF slide assembly, etc.
qa Lamp guide (40)
7 Sheet (VF)
q; Cushion LB (40)
Two craws
8 FP-619 flexible board
Projected part
2-14
A
3 Slide the VF slide cabinet assembly and others once
to the deep end, then slant them in the direction of
the arrow A to release the claw portion of the VF slide
assembly and finally pull them out in the direction of the
arrow B and remove them.
6 Remove the LCD cabinet assembly and others from the two dowels and
cut-outs of the VF slide assembly.
5 Screw
(M1.7 × 2.5),
lock ace, p2
VF slide assembly
Two dowels
Two craws
Cut-outs
9 LB-085 board
4 Screw
(M1.7 × 2.5),
lock ace, p2
qs Illuminator (40)
qf LCX032AN-5
qd Prism sheet (40)
qg LCD cabinet assembly