Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DCR-TRV12E/TRV14E/TRV19/TRV19E<br />
2-9. HINGE (40) ASSEMBLY<br />
2<br />
1 Screw<br />
2 Rotate to the "A" marked portion<br />
(M1.7 × 4), counterclockwise by 90 degrees<br />
lock ace, p2<br />
3<br />
3<br />
A<br />
3 Rotate the "B" marked portion<br />
counterclockwise by 90 degrees<br />
in the direction of the arrow<br />
B<br />
9 Harness (PV-140)<br />
8 Remove the FP-626 flexible board<br />
that is attached by the doble-sided tape<br />
2-10<br />
Dowel for setting<br />
the position<br />
4 Three claws<br />
Caution<br />
Rotation of the LCD panel has limitation due to its hinge<br />
in this model. Excessive force to rotate the LCD panel<br />
damages the hinge.<br />
(Refer to "Caution"of 2.1 Pcabinet assembly.)<br />
Caution<br />
If the FP-626 flexible board is removed once, the<br />
adhesion strength of a double-sided tape decreases.<br />
Use the new FP-626 flexible board at the time of an<br />
assembly.<br />
0 Hinge (40) assembly<br />
5 Hinge cover (C) (40)<br />
Hinge (40) assembly<br />
7 Hinge cover (M) (40)<br />
6 Screw<br />
(M1.7 × 4),<br />
lock ace, p2<br />
Remove the Harness (PV-140) in the direction<br />
of the arrow<br />
Bend the Harness (PV-140) along with connector