You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>nRF24LU1</strong> <strong>Development</strong> <strong>Kit</strong> <strong>User</strong> <strong>Guide</strong><br />
Figure 7 – CES Packet settings<br />
The tab “Packet settings” has the following parameters, see Figure 7<br />
Data Pipe Enable – enable the data pipes by ticking the box.<br />
Address - sets the RX address of the different pipes.<br />
Payload width – sets the number of bytes in the payload from 0 to 32 bytes.<br />
TX address – sets the TX address. This must correspond with the RX address for the chosen pipe in<br />
the PRX device. To use the Auto Acknowledge function, the Data Pipe 0 and the TX address must be<br />
the same.<br />
CRC – can be set to 8 or 16 bits.<br />
Revision 1.0 Page 12 of 36