Pneumatic Fixtured Drills - Douwes International B.V.
Pneumatic Fixtured Drills - Douwes International B.V. Pneumatic Fixtured Drills - Douwes International B.V.
Self-Feed Air Tool Circuitry Valve Schematic Descriptions 32
Self-Feed Air Tool Circuitry Multiple 800 Series Tools with Emergency Retract Sequence of Operations To start cycle: Momentarily depress start valve (green button) thus pressurizing the start signal inlet and pilot chamber in each tool. Tools retract automatically individually as front pilot valve is engaged. To stop cycle: Remotely depress stop valve (red button) exhausting start signal circuit of each tool and retracting tools to normal start position. Required Identification Description Component List 1 Check Valve 1/4” (6.4mm) check valve male pipe threads at both ends. 1 3-way N.C. start valve 1/4” (6.4mm) 3-way normally closed manually actuated valve (green palm button) 1 2-way N.C. emergency stop valve 1/4” (6.4mm) 2-way normally closed manually actuated valve (red palm button) 33
- Page 1 and 2: SP-105EN 0308 3.5M ® Buckeye Pneum
- Page 3 and 4: ISO 9001 Cooper Power Tools Divisio
- Page 5 and 6: Cooper Industries, Cooper Power Too
- Page 7 and 8: Drill & Horsepower Data Drill Speed
- Page 9 and 10: 21L Series Mounting Dimensions Desi
- Page 11 and 12: 31L Series Mounting Dimensions Desi
- Page 13 and 14: 42L Series Mounting Dimensions Desi
- Page 15 and 16: 46L Series Mounting Dimensions Desi
- Page 17 and 18: 21LH Series Mounting Dimensions Des
- Page 19 and 20: Mounting Dimensions Designer’s fu
- Page 21 and 22: 21LD Series Mounting Dimensions Des
- Page 23 and 24: 42LD Series Mounting Dimensions Des
- Page 25 and 26: Multiple Spindle Drill Head Collets
- Page 27 and 28: Self-Feed Tools Accessories Hydraul
- Page 29 and 30: Self-Feed Tools Accessories Industr
- Page 31 and 32: Fixture Post Mounting Components 11
- Page 33: Self-Feed Tools Accessories Aircraf
- Page 37 and 38: Self-Feed Air Tool Circuitry Multip
- Page 39 and 40: Self-Feed Air Tool Circuitry Self-F
- Page 41 and 42: Notes 39
- Page 44 and 45: Sales & Service Centers Note: All l
- Page 46 and 47: Order Catalogs & Literature On-Line
Self-Feed Air Tool Circuitry<br />
Valve Schematic Descriptions<br />
32
Change language