December - San Diego Woodturners
December - San Diego Woodturners December - San Diego Woodturners
San Diego Woodturners Page No 4 December 2002 NOMINATIONS FOR NEW CLUB BOARD MEMBERS ARE NOW BEING ACCEPTED As mentioned in the last newsletter and at the last club meeting, we are in the process of electing new board members for the San Diego Woodturners. The election will be held at the January 15 th club meeting. The board of directors is responsible for the operation of our club. They vote for club officers, they select committee chairs for: programs, the newsletter, the raffle, the video librarian, etc. They oversee the club’s finances. Part of the process of incorporation is that the group is required to have a board of directors. At that time, the group decided to have 15 directors each with 3-year terms. To keep the board experience somewhat consistent, it was also decided that one third of the board would rotate off each year. So, it is now time nominate members for election to the board of directors. The bylaws state that a director will serve a 3-year term, but that they may not serve more than two consecutive terms. At the end of each year, the board must nominate a slate of candidates to fill the open seats. The entire membership votes for the new directors and the top five vote getters are elected. Currently, all of the outgoing board members are eligible to serve again if they so choose. The current board members, their terms, and year their terms end are as follows. Terms end in December of the year listed. Outgoing: Russell Duff - 2002 Jim O’Neal - 2002 Don Owen - 2002 Ken Roth - 2002 Don Werth - 2002 One year remaining: Nan Bushley – 2003 Tom Cummings - 2003 Ernest Grabbe - 2003 Don Kaufmann - 2003 Mike Lonnecker - 2003 Two years remaining: Pete Campbell - 2004 Joe Fleming - 2004 Oskar Kirsten - 2004 Jim Reeve - 2004 Lorin Youde - 2004 The outgoing members have formed a nominating committee, and the committee is soliciting nominations from you. Please contact Don Owen with your suggestions: (619) 426-1457. Wants and disposals Paul Jett, a member of the club, is no longer woodworking due to failing health and has several woodworking tools for sale. If you are interested, please contact his wife, Ellie, at (858) 453-2817 for additional information. A partial list of tools includes: • Delta 12” x 36” lathe • Craftsman 10” radial arm saw • Craftsman 10” contractors’ table saw • Craftsman 12” bandsaw with 6” throat • Craftsman 13” pedestal drill press • 6” grinder with pedestal • electric circular saw • hand saw mitre box • assorted turning tools including: • 1 ¼” Sorby roughing gouge • ½” Sorby bowl gouge • 3/8” Sorby bowl gouge • 1” Sorby skew • ¾” Sorby skew • ½” spindle gouge • 1/8” parting tool • diamond point scraper • scroll chuck - 1” x 8tpi • assorted faceplates • a set of Marples chisels • assorted hand saws • assorted drill bits • miscellaneous lumber Randy Atkinson is looking for a 14" Delta Bandsaw, 1HP, with enclosed stand. Oceanside, CA 760 754-4872
San Diego Woodturners Page No 5 December 2002 VIDEO AND BOOK LIBRARY Don’t forget that we have a video and book library available for you to check out tapes and books for a small fee. We have almost every turning video ever made and are starting to grow our collection of books. Please note the new titles at the end of the list in BOLD LETTERS. For those of you with rentals that are outstanding, please return them to Lynn Moon, Box 972, Rancho Santa Fe, 92067, (858) 756-2296. Either bring them to the club meetings or mail them to me. Media mail is the best price. Title Name Title Name 1. Miniature Lathe Demo Bonnie Kline 2. Woodturning II Bowls Bonnie Kline 3. Woodturning III Boxes Bonnie Kline 4. Thread Cutting Robert Sorby 5. Tips for Turners-Hollow Turning Tools David Ellsworth 6. Turning Between Centers #1 Dennis White 7. Turning Bowls #2 Dennis White 8. Boxes, Goblets, Screws and Threads Dennis White 9. Novelties and Projects #4 Dennis White 10. Classic Profiles #5 Dennis White 11. Twist and Advanced Turning Dennis White 12. Bowl Turning Del Stubs 13. Southern California Woodturning Conference l986 14. Del Mano Gallery 1988-1990 15. Del Mano Gallery 1990 16. Turning Boxes Ray Key 17. Stewart Tools-Promo Incra Dennis Stewart 18. Stewart Tools-Signature in Woods Promo Incra 19. Decorative Techniques Robert Sorby 20. San Diego Woodturners-Flutes and Spindle Turning 21. Woodturning Symposium l992-Irish Woodturning 22. Demo Part 1 Dan Ackerman 23. Demo Part 2 Dan Ackerman 24. Photographing your Pieces (defective) Gary Zeff 25. The Woodturning Workshop 26. Bowl and Hollow Turning John Jordan 27. Bowl and Hollow Turning John Jordan 28. Small Shop Projects:Boxes Jim Cummings 29. Lets Make a Bowl Lathe Timby plans 30. Colonial Footstool-beginning project 31. AAW Symposium l994 32. Wood Dust Solution 33. Sharpening, Sanding #1 David Ellsworth 34. Hollow Turning Tools #2 David Ellsworth 35. Hollow Turning #3 David Ellsworth 36. Natural Edge and Hollow Form Chris Stott 37. First Steps Woodturning, Cutting, Sharpening Chris Stott 38. Turning Bowls Chris Stott 39. Turning Bowls Chris Stott 40. Howard Lewin Seminar l996 41. Photographing your Work Berry Parr 42. Instant Gallery AAW Symposium ’85 and ‘86 43. Coloring and Decorating Stott 44. Hollow Turning David Ellsworth 45. Introduction to Bowl Turning-AAW 46. Introduction to Bowl Turning-AAW 47. AAW ’97 Technique and Instant Gallery 48. Coloring Wood Jan Sanders 49. Cutting and Sharpening for Woodturners Chris Stott 50. Welding, oxy, arc, wire 51. Mike Mahoney – Demo A 52. Mike Mahoney – Demo B 53. Basic Box Ray Key 54. Finial Box Ray Key 55. Finial Box Ray Key 56. Finial Box Ray Key 57. Turned Forms-the Collection Irving Lipton 58. Woodturning Richard Raffan 59. Turning Wood Richard Raffan 60. A &B Turning Projects Richard Raffan 61. The Translucent Bowl and Hawaiian Woods Ron Kent 62. Turning Boxes Chris Stott 63. Decorative Effects and Coloring Chris Stott 64. Woodturning – A Foundation Course Keith Rowley 65. Signatures in Wood Ditmer, Holzapel, Scarpino 66. History of Irish Woodturning 67. AAW Symposium ’96-‘97 68. San Diego Woodturners 69. Turning Boxes Richard Raffan 70. Chatter Techniques, Coloring Bonnie Klein 71. Turning Unusual Materials Bonnie Klein 72. Elliptical Turning David Springett 73. Woodturning Wizary David Springett 74. Bowl Turning Del Stubbs 75. Turning for Furniture Ernie Conover 76. Threaded Lids (V) Bonnie Klein 77. Dick Sing 7-00 1 & 2 Demo 78. Introduction to Bowl Turning Rus Hurt 79. Inlaid and Novelty Boxes Chris Stott 80. Finishing for Woodturners Chris Stott 81. Skill Building Projects Mark St. Leger 82. Turning Projects from Scrap Robert Rosand 83. Turning Green Wood Michael O’Donnell 84. Wet Turning Stuart Mortimer 85. Turning Pens Art Majeras Demo 86. Fundamentals of Sharpening 4-Experts-AAW 87. The Skew Chisel Allan Batty 88. Hand Thread Chasing Allan Batty 89. 90. Inside Out Turning Silva 91. Basic Off Centre Turning Stott 92. Relief Carving Bennett 93. Signature Gouge Ellsworth 94. Basic Bowl on Lathe Raffan 95. Hollowing Engrain & Turning a Box Raffan 96. Introduction to Bowl Turning AAW 97. Turning a Wood Range Rider Johannes Michelson 98. Turning Wood for the Love of It Tobias Kaye 99. Spindle Turning for the Adventurous Tobias Kaye 100. Bowl Turning from Basic to Master Tobias Kaye 101. Vessels of Illusion Trent Bosch 102. Tool Sharpening, Basic Cutting Techniques and Spinning Tops
- Page 1 and 2: San Diego Woodturners A Chapter of
- Page 3: San Diego Woodturners Page No 3 Dec
- Page 7 and 8: San Diego Woodturners Page No 7 Dec
<strong>San</strong> <strong>Diego</strong> <strong>Woodturners</strong> Page No 5 <strong>December</strong> 2002<br />
VIDEO AND BOOK LIBRARY<br />
Don’t forget that we have a video and book library available<br />
for you to check out tapes and books for a small fee.<br />
We have almost every turning video ever made and are<br />
starting to grow our collection of books. Please note the<br />
new titles at the end of the list in BOLD LETTERS.<br />
For those of you with rentals that are outstanding, please<br />
return them to Lynn Moon, Box 972, Rancho <strong>San</strong>ta Fe,<br />
92067, (858) 756-2296. Either bring them to the club<br />
meetings or mail them to me. Media mail is the best price.<br />
Title Name Title Name<br />
1. Miniature Lathe Demo Bonnie Kline<br />
2. Woodturning II Bowls Bonnie Kline<br />
3. Woodturning III Boxes Bonnie Kline<br />
4. Thread Cutting Robert Sorby<br />
5. Tips for Turners-Hollow Turning Tools David Ellsworth<br />
6. Turning Between Centers #1 Dennis White<br />
7. Turning Bowls #2 Dennis White<br />
8. Boxes, Goblets, Screws and Threads Dennis White<br />
9. Novelties and Projects #4 Dennis White<br />
10. Classic Profiles #5 Dennis White<br />
11. Twist and Advanced Turning Dennis White<br />
12. Bowl Turning Del Stubs<br />
13. Southern California Woodturning Conference l986<br />
14. Del Mano Gallery 1988-1990<br />
15. Del Mano Gallery 1990<br />
16. Turning Boxes Ray Key<br />
17. Stewart Tools-Promo Incra Dennis Stewart<br />
18. Stewart Tools-Signature in Woods Promo Incra<br />
19. Decorative Techniques Robert Sorby<br />
20. <strong>San</strong> <strong>Diego</strong> <strong>Woodturners</strong>-Flutes and Spindle Turning<br />
21. Woodturning Symposium l992-Irish Woodturning<br />
22. Demo Part 1 Dan Ackerman<br />
23. Demo Part 2 Dan Ackerman<br />
24. Photographing your Pieces (defective) Gary Zeff<br />
25. The Woodturning Workshop<br />
26. Bowl and Hollow Turning John Jordan<br />
27. Bowl and Hollow Turning John Jordan<br />
28. Small Shop Projects:Boxes Jim Cummings<br />
29. Lets Make a Bowl Lathe Timby plans<br />
30. Colonial Footstool-beginning project<br />
31. AAW Symposium l994<br />
32. Wood Dust Solution<br />
33. Sharpening, <strong>San</strong>ding #1 David Ellsworth<br />
34. Hollow Turning Tools #2 David Ellsworth<br />
35. Hollow Turning #3 David Ellsworth<br />
36. Natural Edge and Hollow Form Chris Stott<br />
37. First Steps Woodturning, Cutting, Sharpening Chris Stott<br />
38. Turning Bowls Chris Stott<br />
39. Turning Bowls Chris Stott<br />
40. Howard Lewin Seminar l996<br />
41. Photographing your Work Berry Parr<br />
42. Instant Gallery AAW Symposium ’85 and ‘86<br />
43. Coloring and Decorating Stott<br />
44. Hollow Turning David Ellsworth<br />
45. Introduction to Bowl Turning-AAW<br />
46. Introduction to Bowl Turning-AAW<br />
47. AAW ’97 Technique and Instant Gallery<br />
48. Coloring Wood Jan <strong>San</strong>ders<br />
49. Cutting and Sharpening for <strong>Woodturners</strong> Chris Stott<br />
50. Welding, oxy, arc, wire<br />
51. Mike Mahoney – Demo A<br />
52. Mike Mahoney – Demo B<br />
53. Basic Box Ray Key<br />
54. Finial Box Ray Key<br />
55. Finial Box Ray Key<br />
56. Finial Box Ray Key<br />
57. Turned Forms-the Collection Irving Lipton<br />
58. Woodturning Richard Raffan<br />
59. Turning Wood Richard Raffan<br />
60. A &B Turning Projects Richard Raffan<br />
61. The Translucent Bowl and Hawaiian Woods Ron Kent<br />
62. Turning Boxes Chris Stott<br />
63. Decorative Effects and Coloring Chris Stott<br />
64. Woodturning – A Foundation Course Keith Rowley<br />
65. Signatures in Wood Ditmer, Holzapel, Scarpino<br />
66. History of Irish Woodturning<br />
67. AAW Symposium ’96-‘97<br />
68. <strong>San</strong> <strong>Diego</strong> <strong>Woodturners</strong><br />
69. Turning Boxes Richard Raffan<br />
70. Chatter Techniques, Coloring Bonnie Klein<br />
71. Turning Unusual Materials Bonnie Klein<br />
72. Elliptical Turning David Springett<br />
73. Woodturning Wizary David Springett<br />
74. Bowl Turning Del Stubbs<br />
75. Turning for Furniture Ernie Conover<br />
76. Threaded Lids (V) Bonnie Klein<br />
77. Dick Sing 7-00 1 & 2 Demo<br />
78. Introduction to Bowl Turning Rus Hurt<br />
79. Inlaid and Novelty Boxes Chris Stott<br />
80. Finishing for <strong>Woodturners</strong> Chris Stott<br />
81. Skill Building Projects Mark St. Leger<br />
82. Turning Projects from Scrap Robert Rosand<br />
83. Turning Green Wood Michael O’Donnell<br />
84. Wet Turning Stuart Mortimer<br />
85. Turning Pens Art Majeras Demo<br />
86. Fundamentals of Sharpening 4-Experts-AAW<br />
87. The Skew Chisel Allan Batty<br />
88. Hand Thread Chasing Allan Batty<br />
89.<br />
90. Inside Out Turning Silva<br />
91. Basic Off Centre Turning Stott<br />
92. Relief Carving Bennett<br />
93. Signature Gouge Ellsworth<br />
94. Basic Bowl on Lathe Raffan<br />
95. Hollowing Engrain & Turning a Box Raffan<br />
96. Introduction to Bowl Turning AAW<br />
97. Turning a Wood Range Rider Johannes Michelson<br />
98. Turning Wood for the Love of It Tobias Kaye<br />
99. Spindle Turning for the Adventurous Tobias Kaye<br />
100. Bowl Turning from Basic to Master Tobias Kaye<br />
101. Vessels of Illusion Trent Bosch<br />
102. Tool Sharpening, Basic Cutting Techniques and Spinning Tops
Change language