Download PDF - Jupiter

Rolleivision twin MSC 325 P
Slide projector for sophisticated 35mm
dissolve projection, with two 90mm AV-
Apogon HFT lenses f/2.4, power cable,
lamp drawer with two 24V/150W halogen
lamps, detachable infrared remote control
with integral laser pointer, tape-recorder
and EDP terminals, master/slave mode and
chip module.
Cat. No. 38 110
Made in Germany
Product Highlights
· Sophisticated dissolve projection with only
one projector, from a single slide tray
· Handset with integral laser pointer
· Dissolve times: Standard 2 s, with handset
0.1 s, 3 s, 6 s.
Interruption of dissolve by stop mode
(Freeze)
· Timer: Fixed screen times of 4 s, 8 s
and 12 s for automatic projection
· Programming of slides in discrete order,
with variable dissolve and screen times
· Double AF system with override and
manual setting
· PC control via V24 interface
· Dimming of lamps in 10 % increments
down to 50 %
· Multi-Sensor Control (direct-drive system)
· Stereoscopic projection with Rollei set
of polarizing filters
· Dimensions (mm/w x h x d):
344 x 149 x 290
· Weight: approx 9.5 kg
Rolleivision twin MSC 325 P

Rolleivision twin MSC 325 P
Type
Compact 35mm slide projector with two
complete projection systems and one slide
magazine.
Microprocessor control, MSC technology,
300-W transformer.
Design
Flat compact body with open magazine
guide, aluminum die-cast chassis.
Five motors for slide changing, magazine
advance, focusing and fan.
Magazine types
Standard magazine (DIN 108) for 36 or 50
5 x 5cm slides, type LKM, CS and Rollei
55/50 hook-up magazines for continuous
projection.
Slide changing
Forward/backward by means of pushbuttons,
automatic forward by timer.
Slide changing forward/backward by realtime
programming or sync-pulse generator
during tape control.
Slide changing forward/backward by
programming on projector or by PC.
Direct access and projection of every single
slide in magazine.
Continuous loop projection and continuous
projection with standby.
Memo function for 16 selected slides.
Programming
Internal working memory for all manually
selected screen and dissolve times per slide
change.
Chip modules for program data for up to
120 slides (Module 100) or 400 slides
(Module 300).
Storage of executed slide show, loading of
program followed by automatic show.
Programming of slides in discrete order, with
variable dissolve and screen times, fade-in.
Stereoscopic projection.
Dissolve
Standard 2 s, with handset 0.1 – 3 – 6 s.
Interruption of dissolve by stop mode
(Freeze).
Dissolve times in programming mode from
0.1 to 25 s in 1s increments.
Focusing
Double AF system with override and
manual setting.
Timer
Fixed screen times of 4 s, 8 s and 12 s for
automatic projection.
Timer intervals in programming mode from
4 to 600 s in 1s increments.
Remote control
Detachable handset in multi-channel infrared
technology.
Slide change forward/backward, dissolve and
screen times, stop and memo function,
AF override, end of projection; 9V battery.
Standard equipment with integral laser
pointer.
Indicators
LEDs for manual, test, record and auto
modes, AF disabled, loading and unloading
of chip module, timer mode.
Green LEDs for timer intervals and dissolve
times, slide number and numerical programming.
Red LEDs for programming and continuous
projection.
Illuminating system
Two 24V/150W halogen lamps.
Two coated aspheric condenser systems
each, two mirrors and heat filters.
Basic lamp brilliance variable from 50 %
to 100 %.
Cooling system
Quiet, highly efficient centrifugal fan with
separate motor, cooling even with lamps off.
Thermal overload protection.
Lenses
High-performance Schneider AV-Xenotar
and Rollei AV-Apogon projection lenses.
Special 35mm Apogon lenses for back
projection.
Connectors
Eight-pole socket for wired remote control,
master/slave mode (Slave), external devices
(via adapter cable) and tape control via
sync-pulse generator.
Nine-pole socket (Sub D) for PC (RS-232 or
V24 interface) and master/slave mode
(Slave).
Control
Master/slave control of additional MSC 535 P
or MSC 325 P double-image or panoramic
projection.
Power supply
220 – 240 VAC with automatic stabilization
of lamp voltage. Power cable approx. 2 m.
Dimensions (mm/w x h x d)
344 x 149 x 290.
Weight
Approx. 9.5 kg.
Optional accessories
Interchangeable lenses, carrying case,
magazines, track extension.
Quadruple lamp slide for rapid lamp change.
Chip modules, adapter cable for taperecorder
control.
Stereo kit, DiaEdit for Windows.
Subject to change without notice.
Franke & Heidecke GmbH · Feinmechanik und Optik
Salzdahlumer Straße 196 · D-38126 Braunschweig
Phone: ++49 (0) 5 31 68 00-100 · Fax: ++49 (0) 5 31 68 00-295
07-06 / PA