Ultra-thin Split Unit - Lomax
Ultra-thin Split Unit - Lomax
Ultra-thin Split Unit - Lomax
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6. Rotate tightening plate and press it to bottom.<br />
Note: The tightening plate cannot be<br />
pressed to right position if the<br />
tightening sleeve is not rep<br />
sited completely.<br />
Tightening plate<br />
7. Connect with wiring terminal,<br />
install wire clamp and press<br />
the connecting wire tight.<br />
and the wiring connect on the terminal board,<br />
Wire clamp<br />
Connection terminal<br />
8. Install big handle<br />
Electric heating belt<br />
When outdoor ambient sensor malfunction happened,<br />
both of the electric heating belts stop working, otherwise,<br />
it will run at the following control:When Toutdoor ambient<br />
5 and the compressor doesn't started, that the<br />
compressor electric heating belt starts to work; Otherwise<br />
if compressor started or compressor doesn't start but<br />
Toutdoor ambient2 , the electric heating belt<br />
will not work. Compressor doesn't start and 5<br />
Toutdoor ambient 2compressor electric heating<br />
belt keeps the original state. When Toutdoor ambient<br />
3, the condenser electric heating belt work; Otherwise,<br />
if Toutdoor ambient6 , the condenser electric heating<br />
belt will not work. 3Toutdoor ambient6, the condenser<br />
electric heating belt will keep the original state.<br />
Electric heating belt<br />
16