Safety Manager Safety Manual - Tuv-fs.com

More documents

Recommendations

Info

5 – Special requirements for TUV-approved applications 4. The field instruments, including panel instruments such as (key) switches, which are used in conjunction with Safety Manager, must meet the requirements of the applicable parts of the EN-54 standard. Visual and audible indications shall be as defined in paragraph 3.2 of EN-54 part 2. 5. Field inputs must have loop-monitoring to detect short-circuits and open loops. Input module types that can be used are: SAI-0410, SAI-1620m and SDIL-1608. Field outputs must also have loop-monitoring. Output module type that can be used: SDOL-0424. 6. The Fire & Gas detection system shall have earth leakage monitoring/detection facilities. 7. Remote display of alarms, failures etc. may only be given via interconnection of Safety Manager systems using the communication option between Safety Manager systems or via hard wired outputs with loop-monitoring via the SDOL-0424 digital output modules. Communication and loop monitoring failures must be alarmed. 8. Safety Manager is only the basis for an EN-54 compliant application. The responsibility for a full EN-54 compliant application lies with the person(s) responsible for configuring and application programming of Safety Manager. The requirements of EN-54 which must be met by the application can be found in section 9, which references the requirements that must be fulfilled in the application. 9. For details on the requirements of the mechanical construction (cabinet, indications, horns) refer to “EN-54 part 2 paragraph 3.2.” 52 Release 131, Issue 4.2
Fax Transmittal Fax Number: +31 (0)73 6219 125 Reader Comments To: Honeywell Safety Management Systems, attn. Technical Documentation Group From: Name: Date: Title: Company: Address: City: State: Zip: Telephone: Fax: Safety Manager Safety Manual, Release 131, Issue 4.2, 23 October 2008 Comments: You may also call the Technical Documentation Group at +31 (0)73 6273 273, email Honeywell SMS at sms-info@honeywell.com, or write to: Honeywell Process Solutions Safety Management Systems P.O. box 116 5201 AC ‘s-Hertogenbosch The Netherlands Safety Manager User documentation
Page 1 and 2:
Safety Manager Safety Manual EP-SM.
Page 3 and 4:
Tip This symbol is used for useful,
Page 5 and 6:
Contents 1 The Safety Manual 1 Cont
Page 7 and 8: The Safety Manual 1 Content of Safe
Page 9 and 10: Basic skills and knowledge Basic sk
Page 11 and 12: Safety standards for Process & Equi
Page 13 and 14: Safety standards for Process & Equi
Page 15 and 16: Architectural principle and standar
Page 17 and 18: Figure 3 Functional diagram: QMR ar
Page 19 and 20: Certification Certification The adv
Page 21 and 22: Standards compliance Standards comp
Page 23 and 24: Standards compliance IEC 60068-2-30
Page 25 and 26: Safety Manager fault detection and
Page 27 and 28: Shutdown at assertion of Safety Man
Page 29 and 30: SM Controller faults Table 4 Contro
Page 31 and 32: SM Controller faults Table 7 Contro
Page 33 and 34: SM IO faults SM IO faults Tip: For
Page 35 and 36: SM IO faults Digital output faults
Page 37 and 38: SM IO faults Table 13 on page 31 sh
Page 39 and 40: SM IO faults . The input compare er
Page 41 and 42: Calculation errors Sometimes, howev
Page 43 and 44: Safety Manager special functions 4
Page 45 and 46: Unit shutdown outputs The unit shut
Page 47 and 48: On-line modification On-line modifi
Page 49 and 50: SafeNet communication The maximum r
Page 51 and 52: SafeNet communication System respon
Page 53 and 54: Special requirements for TUV-approv
Page 55 and 56: 12. To reduce the influence of dist
Page 57: F&G applications F&G applications F
show all

Safety Manager Safety Manual - Tuv-fs.com

Create successful ePaper yourself

Delete template?

Save as template?