temp-rite - ALVA

Food Service Solutions 

temp-rite International I 1

temp-rite 

Food Service Solutions 

2 I temp-rite International

CONTENTS 

Insulated Tray Systems 

Temp-Royal 

Bravo 

Temp-Mediteran 

Century II 

Skandia 

Genie 

Tivoli III 

Pellet Systems 

Insul-Max/Insul-Solid 

Temp-Active 

Temp-Rondo 

Temp-Serve 

Serve-Rite 

Temp-Futura 

Temp-Induc 

Temp-Classic 

Temp-Liquid 

Dishware 

Chinaware 

Glassware 

Reusable Plastic Dishware 

Disposable Plastic Dishware 

Kitchen and Serving Equipment 

Portioning Equipment 

Storage 

Trolleys, Transport 

Other Products 

5 - 8 

6 

6 

7 

7 

7 

8 

8 

9 - 12 

10 

11 

12 

13 - 14 

15 - 16 

17 - 22 

23 - 26 

27 - 28 

29 - 32 

33 - 40 

34 - 37 

37 - 38 

38 - 39 

39 - 40 

41 - 56 

42 - 49 

50 - 52 

53 - 56 

57 - 62 



Operational efficiency, reliability, high performance in every type of kitchen, 

user-friendly design, safe handling, versatility, and attractive appearance: these are the 

product characteristics that temp-rite has achieved by paying close attention to detail 

and maintaining high standards of quality. 

More than a century of manufacturing experience has taught us how to combine 

innovative technology with proven designs and materials, and rigorous adherence to 

ergonomic principles has enabled us to develop products you will find easy to use. 

temp-rite International is a reliable partner that has used its expertise to create 

efficient working solutions for its customers all over the world. 

temp-rite can make a big difference to your meal-service operations. You can be sure 

that our product ranges, our experience, and our after-sales service 

will bring you enormous practical benefits. 

white 

cream 

ivory 

honey 

blue 

evening blue 

light blue 

mauve 

burgundy 

cinnamon 

mocha 

grey 

light grey 

teal 

Note: temp-rite reserves the right to make technical alterations without giving prior notice. Product colours may therefore be 

different from those indicated. The colours in this catalogue are as accurate as possible within the limits of the photographic 

and printing processes. 


Insulated Tray Systems 


Meal Distribution Systems 

All temp-rite’s tray-based meal distribution systems consist of components which have a highly 

efficient insulating layer of CFC-free polyurethane foam. This insulating layer is sandwiched 

between inner and outer walls made of an extremely sturdy type of polypropylene which does 

not impart any smell or taste to food. All components have easy-to-clean, dishwasher-proof 

surfaces and strong protective rims. 

temp-rite tray systems hold an entire meal (breakfast, midday meal, evening meal) with side 

dishes, beverages, soups, snacks, cutlery, napkin, patient menu card etc. 

The tray systems utilize the thermal-zone principle and have separate compartments with 

raised edges for the various meal components. The raised edges hold the porcelain inserts 

securely in place and prevent spillage. This makes it easier for elderly patients to feed 

themselves. 

The division of the trays into thermal zones ensures that hot and cold meal components served 

side by side remain at the desired temperatures. temp-rite tray systems consist of a server and 

a cover, and can be stacked. This means they can be transported on open – in other words, 

inexpensive – ward trolleys. 

Temp-Royal 

The Temp-Royal tray has two rectangular meal-component compartments as well as a circular 

central compartment which will hold all commonly used types of 26-cm plate. The server is 

ergonomically shaped and has a wing for soup, beverages, snacks etc. The wing, to which a 

menu card can be attached, is left open when the cover is placed on the server. 

Dimensions: 

Server: 

Cover: 

Height of set: 

Models: 

Servers: 

Covers: 

Qty per case: 10 

approx. 530 x 370 x 45.7 mm (Euro-Norm) 

approx. 447 mm x 361 mm x 63.5 mm 

approx. 102 mm 

S522G, server in burgundy 

S523G, server in blue-grey 

S524G, server in cream 

T520G, cover in light grey 

T524G, cover in mocha/cream 

Bravo 

temp-rite’s Bravo tray system has two rectangular compartments, a central circular 

compartment for 23-cm china plates, and a wing for beverages, snacks etc. A menu-card holder 

can also be clipped onto the wing. The tray cover leaves the wing open. 

Dimensions: 

Server: 

approx. 525 x 325 x 40.6 mm (Gastro-norm) 

Cover: 

approx. 419 x 325 x 53.3 mm 


approx. 96.5 mm 

Models: 

Servers: 

S409G, in cream 

S418G, in ivory 

Covers: 

T410G, in mocha/cream 

T411G, in honey/cream 

T418G, in grey/ivory 

T419G, in mauve/ivory 



Temp-Mediteran 

The Temp-Mediteran insulated tray system has two essentially rectangular compartments and a 

T-shaped central compartment which will hold not only a rectangular plate, but also cutlery etc. 

If desired, round bowls can be placed in the rectangular compartments. The Temp-Mediteran 

server also has two circular compartments: one for 19-cm starter plates, and one for 21-cm 

main-course plates. A menu-card holder can be clipped onto the server. The cover encloses the 

entire server. 

Dimensions: 

Server: 

approx. 530 x 375 x 47.0 mm (Euro-norm) 

Cover: 

approx. 530 x 375 x 64.5 mm 


approx. 103.5 mm 

Models: 

Servers: 

S623G, in blue-grey 

Covers: 

T620G, in light grey 


Century II 

temp-rite’s Century II insulated tray has a central, circular compartment for 23-cm china plates, 

as well as a multi-purpose compartment, and two small rectangular compartments. The server 

has a wing for beverages, snacks etc. The wing is enclosed by the full cover. 

Dimensions: 

Server: 

approx. 472.5 mm x 373.5 mm x 45.7 mm 

Cover: 

approx. 472.5 mm x 373.5 mm x 68.5 mm 



Models: 

Servers: 

S447P, in ivory 

Covers: 

T445P, in mauve/ivory 


Skandia 

The Skandia insulated tray system’s four rectangular compartments guarantee optimum 

portion control and utilization of the available space. The server has a wing which will hold a 

soup starter, beverages, snacks etc. The Skandia system is available with either a full cover, 

which encloses the wing, or a partial cover, which leaves the wing open. If the partial cover is 

used, a menu-card holder can be clipped onto the server. 

Dimensions: 

Server: 

approx. 523 x 340 x 45.7 mm 

Full cover: 

approx. 523 x 340 x 66.0 mm 

Partial cover: 

approx. 371 x 340 x 66.0 mm 



Models: 

Servers: 

S581P, in ivory 

Covers: 

T585P, full cover in grey / ivory 

T586P, partial cover in mauve / ivory 



Genie 

The Genie insulated one-piece system allows servers to be stacked directly on top of each other, 

with each server acting as the cover for the server beneath it. In a stack consisting of six servers, 

only two covers are required (one at the top and one at the bottom of the stack). One-piece tray 

systems function as thermal columns (much in the manner of a thermos flask) and thus have 

outstanding heat-retention properties. The Tivoli III has four rectangular meal compartments; 

these make optimum use of the available tray space and allow efficient portion control. Stacks 

are closed by means of a full cover. 

Dimensions: 

Servers: 

approx. 353 x 274 x 50.8 mm 

Covers: 

approx. 353 x 274 x 50.8 mm 

Models: 

Servers: 

S464P, in cinnamon / cream 

Covers: 

T463P, in cream 


Tivoli III 

The Tivoli III is an insulated one-piece system that allows servers to be stacked directly on top of 

each other, with each server acting as the cover for the server beneath it. In a stack consisting 

of six servers, only two covers are required (one at the top and one at the bottom of the stack). 

One-piece tray systems function as thermal columns (much in the manner of a thermos flask) 

and thus have outstanding heat-retention properties. The Tivoli III has four rectangular meal 

compartments; these make optimum use of the available tray space and allow efficient portion 

control. Stacks are closed by means of a full cover. Tivoli III servers and covers are made of 

seamless polypropylene. 

Dimensions: 

Servers: 

approx. 381 x 345.5 x 66 mm 

Covers: 

approx. 381 x 345.5 x 66 mm 

Models: 

Servers: 

L65, in mocha 

Covers: 

L67, in cream 






Insulated meal-distribution systems in the traditional style. Keep meals warm and fresh. Made 

of highly robust, dishwasher-proof polypropylene which will not impart any taste or smell to 

food. Lightweight and therefore easy to handle. The surfaces of temp-rite’s double-walled 

pellet-system components are seamless and thus easy to keep clean. 

Standard Pellet System 

The server will hold plates of up to 23 cm in diameter. The CFC-free polyurethane foam used to 

insulate both the server and the cover is highly efficient, so meals can be kept at an appetizingly 

warm temperature for long periods. Two types of pellet-system cover are available, Standard 

and Allure. Both types can be supplied in a variety of colours. The dome-shaped covers leave 

plenty of room for the food on the plate. The handle on the Allure cover is soft to the touch and 

guarantees ease and safety of handling. The system components are stored on special (G1750) 

system trolleys. 

Dimensions: 

Server: 

diameter approx. 244 mm, height approx. 38 mm 

Cover: 

diameter approx. 259 mm, height approx. 66 mm 

Models: 

Servers: S87B, in mauve 

S88B, in ivory 

S89B, in blue 

S95B, in evening blue 

Standard covers: T86B, in grey 

T87B, in mauve 

T88B, in ivory 

T89B, in blue 

T90B, in evening blue 

Allure covers: ALD110, in mauve 

ALD120, in grey 

ALD130, in evening blue 

ALD140, in teal 

ALD150, in burgundy 


Insul-Max/Insul-Solid 

Special covers designed to extend the time meals can be kept warm. These servers will 

accommodate plates with diameters of up to 23 cm, and can be used with the traditionally 

styled Allure and Standard pellet covers. 

Insul-Max components contain an integrated heat-retaining material that is more efficient than 

the conventional type of foam-insulated server, and can keep meals warmer for much longer. 

Insul-Solid is a single-walled system made of a special type of plastic with outstanding 

heat retention properties. 

The servers can be pre-heated in special dispensers, after which they will impart heat to the 

plates and the meals on them very gradually. Insul-Max/Insul-Solid system components are 

stored in special (G1750) system trolleys. 

Dimensions: 

Insul-Max/Insul-Solid: diameter approx. 244 mm, height approx. 45 mm 

Models: 

Insul-Max: IMXB23G, in grey 

IMXB23M, in mauve 

IMXB23E, in evening blue 

IMXB23T, in teal 

Insul-Solid: IS23M, in mauve 

IS23B, in blue 

Qty per case: Insul-Max: 12 

Insul-Solid: 20 

See page 60 for further information about serving trays. 


Temp-Active 

Server specially designed for use with the conventionally styled Standard and Allure 

pellet-system covers. Holds plates with diameters of up to 23 cm. The Temp-Active system is 

more efficient than the conventional type of insulated pellet system, and thus keeps meals 

warmer for much longer. Temp-Active servers have a base with an integrated active heating 

core that can be preheated in special activators (IHA95) to an ideal temperature within just 10 

seconds. The server then gradually imparts its stored heat to the meal on the plate. 

The activator is easy to operate: all you have to do is place the server in the activator’s server 

holder. This activates the heating process, which is automatically deactivated as soon as the 

core in the base reaches the optimum temperature. 

Once the ideal temperature is set, the activation process is exactly replicated each time a server 

is placed in the holder. That means each server is preheated to exactly the same temperature. 

The side walls of the servers are insulated, so they are not hot to touch and can be handled 

safely. Padded gloves and special handling equipment are therefore not required. And because 

the servers are fully insulated, heat is not conducted downwards. The servers can therefore be 

set down on any kind of surface. Temp-Active components are kept in special (G1750) system 

trolleys. 

Dimensions: 

Server: 

approx. 259 mm in diameter, approx. 46 mm in height 

Activator: 

approx. 400 x 480 x 1,340 mm (height without the base holder) 

Net weight of activator: approx. 17 kg 

Activator wattage: approx. 5.0 kW, 400 V three-phase current 

Models: 

Servers: IHB21M, in mauve 

IHB21T, in teal 

IHB21G, in grey 

IHB21E, in evening blue 

Activator: 

IHA95 

Qty per case: Servers: 12 

Activators: 1 

Temp-Active Table 

Special table on which the activator and the servers can be placed. It can be positioned beside 

meal-distribution conveyor belts to facilitate the serving process. Two stacks of servers can 

be placed next to the activator on the sound-absorbing table top. The edges of the table are 

bevelled and have been deburred. A storage platform is welded to the height-adjustable table 

legs. The table top and frame are made of chrome-nickel steel, as is the storage platform. 

Dimensions: 

approx. 800 x 600 x 850 mm 

Net weight: 

approx. 27 kg 

Model: 

IHAT95 



Temp-Rondo 

The Temp-Rondo meal-distribution system is based on the traditional server-and-cover 

(pellet) concept. It will keep hot and cold meals in perfect condition right up to the moment 

they are served to patients or care-home residents. The ergonomically shaped handle on the 

insulated covers guarantees ease of handling and optimum functionality. The Temp-Rondo 

system consists of a variety of individual components. The welded seams of the insulating 

pieces do not allow any heat loss (or gain), and the insulating foam between the inner and 

outer walls also ensures excellent heat and cold retention. The dome cover leaves plenty of 

room for the food on the plate. 

Insulated Servers and Covers for 26-cm Plates 

Temp-Rondo servers and covers will accommodate all the usual types of 26-cm plate and also 

china stew bowls (including bowls with reusable plastic lids). 

Dimensions: 

Server: 

approx. 285.5 mm in diameter, 51.5 mm in height 

Cover: 

approx. 285.5 mm in diameter, 52.5 mm in height 



Models: 

Servers: 

WUM05, in light blue 

WUM06, in grey 

Covers: 

WOM05, in light blue 

WOM06, in grey 


Insulated Servers and Covers for Soup Bowls 

These pieces are shaped to prevent spillage, even during off-the-premises transport operations. 

The covers are designed in such a way that no additional lid is required for the soup bowls. 

Dimensions: 

Server: 

approx. 141 mm in diameter, 69 mm in height 

Cover: 



approx. 86 mm 

Models: 

Servers: 

I-WUS17, in blue-grey 

I-WUS18, in grey 

Covers: 

I-WOS17, in blue-grey 

I-WOS18, in grey 


Inlays 

Preheatable and precoolable inlays are available for the insulated servers. These inlays further 

enhance the already extremely efficient temperature-retaining performance of the various 

Temp-Rondo system components. In fact, meals can often be distributed without the back-up 

of active heating and cooling systems during the meal-service phase. The cooling insert is 

filled with a cooling gel that can maintain temperatures at as low as –18°C, while the heating 

insert contains a heat-retention medium capable of maintaining temperatures of up to 130°C. 

Yet there are no heat- or cold-radiation effects that could adversely effect adjacent meal 

components, because the inlays are fully enclosed within the insulated system servers. 

Dimensions: 

Both types: 

approx. 258.5 mm in diameter, 37 mm in height 

Models: 

Cooling inlay: 

IC05, in white 

Heating inlay: 

IH05, in burgundy 


Cold-Retaining Servers and Covers 

The servers and covers are suitable for all 26-cm and all 21-cm plates in common use. 

The covers can be placed directly on the plates. 

Dimensions: 

Servers: for 21-cm plates: approx. 220 mm in diameter, 50 mm in height 

for 26-cm plates: approx. 265 mm in diameter, 50 mm in height 

Covers: for 21-cm plates: approx. 227 mm in diameter, 50 mm in height 

for 26-cm plates: approx. 270 mm in diameter, 52 mm in height 



Models: 

Servers: or 21-cm plates: KU05, in light blue 

KU06, in grey 

for 26-cm plates: KUM05, in light blue 

KUM06, in grey 

Covers: for 21-cm plates: KO05, in light blue 

KO06, in grey 

for 26-cm plates: KOM05, in light blue 

KOM06, in grey 


See page 60 for further information about serving trays. 


Temp-Serve 


Temp-Serve 

With the Temp-Serve cart, hot menu components can be kept hot right up to serving time, 

while cold food items remain cold. In the cart, movable isolators are used as insulating walls 

which keep the “hot” and “cold” sides of the cart separate. Each tray slots into the cart in such 

a way that the isolator divides it into two parts. Trays complying with the Gastro-Norm standard 

(530 x 325 mm), or with temp-rite’s own “tri-Norm” standard dimensions (575 x 325 mm), are 

available. The food on the heated side of the cart is kept warm by circulating hot air, and on the 

other side cold items are kept cool by an active convection-cooling system. The cart has a 

control panel, by means of which up to three different operating programs per day can be set. 

The cart, which is made of stainless steel, aluminium and ABS, complies with the IPX5 standard. 

It is fitted with a wrap-around bumper, two fixed wheels and two braked swivel wheels. All the 

wheels have a diameter of 160 mm. A number of optional extras are available for this cart. 

Dimensions: 

approx. 986 x 778 mm 

Height: 

1,482 mm for 20/24 meals 

1,722 mm for 26/30 meals 

Meal-carrying capacity: 20 / 26, with 92 mm vertical clearance between trays 

24 / 30, with 80 mm vertical clearance between trays 

Electrical values: approx. 3.0 kW, 230V / 50 Hz 

approx. 8.2 kW, 400V / 50 Hz 

Model: 

Temp-Serve 

Trays 

The specially designed Temp-Serve trays have no raised surfaces, holes or cutouts, and can 

therefore be loaded in a variety of ways. Both flat sides of these trays can be used, and they can 

also be stacked either way round. 

Dimensions: temp-rite standard (575 x 325 mm), or 

Gastro-Norm standard (530 x 325 mm), or 

1/2 Gastro-Norm (breakfast) 

Models: 

temp-rite standard S00.000.01, in pearl white 

S00.000.02, in light green 

Gastro-Norm 

S00.000.03, in terracotta 

S00.000.30, in pearl white 



1/2 Gastro-Norm S00.000.10, in pearl white 




Domes/Lids 

Reusable domes and lids made of high-quality plastic are available for the Temp-Serve 

meal-distribution system. They are dishwasher-proof and facilitate hygienic transport and 

storage. 

Domes to fit 23-cm or 23.5-cm plates 

Dimensions: 

approx. 240 mm in diameter 

Models: 

2029.01, transparent, for cold dishes 

2029.02, grey, for hot dishes 


Domes to fit 26-cm plates 

Dimensions: 


Models: 

2028.01, transparent, for cold dishes 

2028.02, grey, for hot dishes 


Lids for 0.25-litre starter soup bowls 

Dimensions: 


Model: 

V461 



Serve-Rite 


Serve-Rite 

Trolley for serving sandwiches and bread rolls. It is built around a sturdy aluminium frame, 

to which ergonomically shaped push-bars made of metal tubing are attached. 

The trolley has three drawer compartments, which can be divided up to accommodate one, 

two, or three drawers for GN 1/1 containers (or subdivisions of these). A non-mains operated 

active cooling system can be provided for one of the drawer compartments. The trolley is fitted 

with a low-level wrap-around bumper, a folding worktop and a rubbish-bag holder. A fixture 

with cutouts for two GN 1/1 containers and one GN 1/8 container is also available. 

The bread trolley, which is made largely of aluminium, has an outer casing finished in blue. It 

has 2 fixed wheels, and 4 braked swivel wheels. All of the wheels have a diameter of 160 mm, 

and are fitted with VLI tyres. The trolley is thus very easy to push and manoeuvre. 

Dimensions: 

approx. 1,416 x 730 x 940/1,380 mm 

Wattage: 

0.18 kW, 230 V AC (with optional cooling system) 

Models: 

BT0.000 with cooling system 

BT0.100 without cooling system 


Cutlery Holders 

Cutlery holders for the dispensing of cutlery are available. 

Dimensions: 

approx. 135 mm in height, inner diameter approx. 100 mm 

Models: BT0-285/117 (made of perforated 18/10 chrome-nickel steel) 

BT0-286/117 (made of unperforated 18/10 chrome-nickel steel) 

BT0-282/113 (made of white perforated polyethylene) 


Precoolable GN Containers 

Precoolable plastic GN containers for passive cooling purposes. Gel is used as the cooling agent 

in these containers. 

Dimensions: 

standard GN subdivisions; all containers 152 mm deep 

Models: CM1100 GN 1/1 

CM1101 GN 1/2 

CM1102 GN 1/3 

CM1103 GN 1/3 - subdivided 

CM1104 GN 1/6 


GN Divider 

Facilitates use of GN 1/6 containers in the drawer compartments. 

Model: 

BT0.140 


Other types of GN container are described on page 48. 


Temp-Futura 


Temp-Futura 

Temp-Futura is the equal of just about any meal-service task. As well as being a tried and 

trusted hot-meal (Cook-Serve) distribution system, it can also be used in Cook-Chill operations 

if streamlining preparation routines is your main priority. And it is also capable of supporting 

Cook-Freeze meal-service operations if you have decided to buy in complete pre-prepared 

menus. With Temp-Futura, you call the shots. 

Thanks to the ITC (Integrated Thermo Control) system in the Temp-Futura heating elements, you 

can be sure your meal components will be heated to just the right temperature. But cold dishes 

remain cold, because the warm meal components are heated individually. And if the entire meal 

has to be served cold, the heating elements remain deactivated. In other words, each Temp- 

Futura cart detects automatically which items have to be regenerated, and exactly how much 

heat is required. But the system controls allow you plenty of options. For example, the carts can 

be set to heat up at the same time (e.g. as meal components are being loaded into them), or the 

meal-heating phase can be staggered in order to minimize energy-consumption peaks. 

With the Temp-Futura system, you can choose between decentralized meal-regeneration 

in the ward and a centralized kitchen-based operation, because the system technology can 

be integrated either in the cart or, with the aid of system racks, in floor-standing cabinets. 

Temp-Futura carts are available in a variety of versions, and in three different sizes. They can be 

configured to meet just about any set of ward meal-service requirements. Temp-Futura trays 

are available in a variety of sizes and versions. 

The carts are so well insulated that in general they do not need to be fitted with active cooling 

systems. However, if extra cooling is required, mains operated and non-mains operated active 

and passive cooling systems are available. If desired, every Temp-Futura cart model can be 

supplied in a version that can withstand the rigours of wash plants. There are even Temp-Futura 

solutions for the automated transport of meal components. 

Carts 

Temp-Futura carts are for meal distribution and regeneration, and for keeping food hot. 

The cart casings are made of double-walled, insulated stainless steel. The base of the cart is 

protected on all sides by a bumper made of recyclable blue plastic, and there are bumpers of the 

same material above the two doors which form the long sides of the cart. A variety of optional 

extras are available, including mains and non-mains operated passive- and active-cooling 

systems, a towing attachment, and a galley rail. The carts are available in 2 basic sizes – one 

for temp-rite trays, and one for Euro-Norm (EN) trays. Each set of glider rails (i.e. each tray rack) 

is fitted with up to 3 ITC (Integrated Thermo Control) heating elements, which automatically 

heat the meals on the trays to the ideal consumption temperature. Temp-Futura carts are 

lightweight, and fitted with two fixed and two swivel wheels. Each wheel measures 160 mm in 

diameter. 

Dimensions: 

Floor-space requirements (temp-rite standard): approx. 825 x 780 mm 

(Euro-Norm size): 


Height: cart with16 racks: approx. 1,315 mm 

cart with 20 racks: approx. 1,525 

cart with 24 racks: approx. 1,735 

Unloaded weight: cart with16 racks: approx. 130 kg for temp-rite standard 

approx. 135 kg for EN standard 

cart with 20 racks: approx. 147 kg for temp-rite standard 


cart with 24 racks: approx. 163 kg for temp-rite standard 


Wattage per rack: 

approx. 0.18 kW, 230 V (rack fitted with 

one 23- cm and one 8-cm heating element) 

Models: Cart with16 racks: TR400-16 for temp-rite standard 

TR400EN-16 for EN standard 

Cart with 20 racks: TR400-20 for temp-rite standard 


Cart with 24 racks: TR400-24 for temp-rite standard 




Active Convection-Cooling System (Non-Mains Operated) 

This system provides active convection cooling for the 20-tray version of the Temp-Futura 

cart. The patented zeolite technology operates independently of the mains power supply and 

guarantees an even distribution of cool air in the cart during transport operations, waiting 

periods, and when the cart is parked. The cooling can be regulated by means of a membrane 

keyboard that does not require mains power. The system has been designed to keep preportioned 

meals suitably cool inside the cart (i.e. at a temperature of 3-7°C) until they are 

regenerated just before being served. The FreeZeo system complies with HACCP hygiene 

regulations in every particular. 

The FreeZeo technology, which is integrated in the cart casing, has been designed for a 

workload of two meal services per day. Cooling is achieved by means of a central wall with 

cooling fins. The FreeZeo cooling system is extremely quiet in operation and requires no 

downtime for recovery after use. It is well protected against contamination and knocks and 

bumps, which means it is eminently suitable for off-the-premises transports. To prevent 

condensation reducing cooling efficiency, the external casing, the internal casing and the doors 

have been designed as thermally separate units. The door frame is fitted with an all-round seal. 

The FreeZeo system requires very little maintenance and should provide reliable service 

throughout a very long useful life. 

Dimensions: 

Carts with 160 mm wheels: approx. 955 x 780 x 1,660 mm (D x W x H) 

Carts with 200 mm wheels: approx. 955 x 780 x 1,700 mm (D x W x H) 

Wattage: 

The cart’s overall power consumption is not affected by 

the FreeZeo cooling system, since the drying out of the 

zeolite does not take place within the meal-regeneration 

periods. However, the FreeZeo power-requirement 

values are as follows: 

Heating (for the drying out 

of the zeolite): 

approx. 1.9 kW 

Convection cooling fans: 

Models: 

approx. 1.1 kW 

TR400/FreeZeo-20 (for temp-rite standard) 

TR400EN/FreeZeo-20 (for EN standard) 

Active, Statically Operated Quiet Cooling System 

In this version of the cart, external casing, internal casing and the doors are all designed as 

thermally separate units. The refrigeration unit is mounted on the underside of the cart in a 

CNS casing with ventilation louvres. The cart is suitable for use in off-the-premises transport 

operations. Cold meal components are kept at under 10°C by means of cooling serpentines 

integrated in the side walls; this cooling system guarantees the maintenance of evenly 

cold temperatures. The quiet-running cart can be operated on inclines, and requires little 

maintenance. 

Weight when empty: Cart with 16 racks approx. 170 kg for temp-rite standard 


Cart with 20 racks approx. 190 kg for temp-rite standard 


Cart with 24 racks approx. 220 kg for temp-rite standard 


Wattage of the cooling system: 

approx. 0.5 kW, 230 V; cooling system 

operated by means of the control box 

Refrigerant: 

R134a 

Models: Cart with 16 racks TR400C-16 for temp-rite standard 

TR400CEN-16 for EN standard 

Cart with 16 racks TR400C-20 for temp-rite standard 


Cart with 24 racks TR400C-24 for temp-rite standard 



Temp-Futura Rack 

Stationary rack for the regeneration and reheating of trayed meals in carts. Made of 18/10 

chrome-nickel steel, and fitted with an integrated timer box. The rack has the same controls 

and utilizes the same regeneration technology as the Temp-Futura carts. Regeneration 

commences as soon as the cart containing the meals is coupled with the rack. 

In the rack, an automatic locking mechanism ensures that the system is ready to operate as 

soon as the cart is pushed in. Drive-in guides on each side of the rack interior facilitate accurate 

positioning of the cart. Once rack and cart have been coupled, the top part of the rack can be 

raised some millimetres by means of a lever. This arrangement ensures that direct contact is 

established between the heating elements in the rack and the plates in the cart. When the cart 

is taken out of the rack, the induction heating is automatically switched off. 

There are vertical bump protectors on both sides of the opening for the carts, and the rack 

stands securely on 4 plastic feet. The back panel of the rack can be removed for installation and 

maintenance purposes. An active cooling system for the rack is available as an optional extra. 

Dimensions: 

Rack: 

approx. 1,220 x 1,150 x 1,800 mm 

Cart: 

approx. 1,049 x 691 x 1,562 mm 

Full-capacity load: 20 sets 

Weight of unloaded cart: approx. 120 kg 

Wattage per tray: approx.0.18 kW, 230 V (one 23-cm and one 8-cm 

heating element per tray) 

Model: 

TR600 

Temp-Futura TR450 

The Temp-Futura TR450 consists of a GN refrigerating cabinet fitted with Temp-Futura heating 

elements and system controls. The number of heating elements to be provided is specified by 

the customer. Because the cabinet can be configured in so many different ways, it is just as 

suitable for serving meals to large groups of patients/diners as it is for table-service operations. 

The meal components are transported to and from the cabinet on enclosed, insulated trolleys 

(such as those described on page 53). The TR450 cabinet has been designed so that it can 

provide continuous cooling 24 hours a day. Meal regeneration takes place while cooling is in 

progress; the insulation in the individual pellets that are placed in the cabinet and the TR450 

system controls ensure that warm meal components are heated while cold meal components 

remain cold. That means the various parts of the meal can all be loaded in the cabinet at the 

same time, and still be served in perfect condition at different times of the day. 

The standard version of the cabinet can be fitted out with a variety of optional extras. A 

door lock, automatic switching on and off of the cooling system, a signal to indicate that 

regeneration has been completed, and an external refrigeration unit are just some of the extra 

features that can be provided. 

Dimensions: 

Single-door version: 

Version with two doors: 

Midi version: 

Mini version: 

approx. 800 x 720 x 2,020 mm (D x W x H); holds up to 13 trays 

approx. 800 x 1,440 x 2,020 mm (D x W x H); holds up to 26 trays 

approx. 670 x 700 x 1,455 mm (D x W x H); holds up to 8 trays 

approx. 675 x 635 x 430 mm (D x W x H); holds up to 2 trays 

The electrical values depend on how the cabinet is configured. The basic data set out below 

apply for all models:. 

Electrical values: 

Wattage of the 

refrigeration unit: 

Refrigerant: 

Models: 

approx. 0.18 kW, 230 V per tray (assuming one large and one small 

heating element per tray set). 

0.5 kW, 230 V 

R134A 

TR450-S 

TR450-D 

TR450-Midi 

TR450-Mini 


Servers 

Non-insulated servers for the distribution of warm meals. Designed to fit Temp-Futura carts. 

Made of highly heat-resistant dishwasher-proof plastic, these servers can be supplied with 

up to three cutouts (for an entrée dish, soup bowl and side dish) at the front of the tray. The 

cutouts are positioned so that they are directly above the heating elements in the Temp- 

Futura carts. The cutouts have been specially designed to hold the dishes on which warm meal 

components are served. 

The rest of the tray provides ample space for cold meal components, the patient’s name-card, 

cutlery etc. 

Dimensions: tri-Norm: approx. 545 x 325 x 85 mm 

Euro-Norm: 

approx. 530 x 370 x 85 mm 

Gastro-Norm: 

approx. 530 x 325 x 85 mm 

Height of set = height of server + cover 

Models: Colour: Cutouts: Size: 

Left: Centre: Right: 

OD-Tray ivory approx. 8 cm approx. 18 cm 8 cm tri-Norm 

S700 ivory free approx. 18 cm 8 cm tri-Norm 

S712G ivory free approx. 23 cm 8 cm tri-Norm 

S712G-G granite free approx. 23 cm 8 cm tri-Norm 

S713G ivory free approx. 23 cm free tri-Norm 

S714G ivory approx. 8 cm approx. 23 cm 8 cm tri-Norm 

S715G ivory approx. 23 cm free 23 cm tri-Norm 

S716G ivory free approx. 23 cm 13 cm Euro-Norm 

S716G-G granite free approx. 23 cm 13 cm Euro-Norm 

S717G ivory free approx. 23 cm 18 cm Euro-Norm 

S720-G ivory free approx. 23 cm 8 cm Gastro-Norm 

Qty per case: 

20 OD-TRAY, S712G(-G), S713G, S714G 

S715G, S716G(-G), S717G, S720: 

24 S700 

Insulated Domes 

Dishwasher-proof system domes for covering entrée dishes, starter soup bowls, and side-dish 

bowls. These domes are double-walled, and the layer of plastic foam between the inner and 

outer walls ensures excellent insulation. The domes lock securely together with the servers and 

thus prevent the transfer of the heat and aroma of individual meal components to neighbouring 

compartments. Note: the dimensions of the cutouts should be borne in mind when domes for 

specific servers are being selected. 

Soup-bowl dome for 8-cm cutout 

Dimensions: 


Models and colours: T721A mauve 

T722A 

blue 

T725B 

burgundy 


Dimensions: 


Models and colours: T821 mauve 

T822 

blue 

T823 

evening blue 

Plate dome for 18-cm cutouts 

Dimensions: 


Model and colour: T711 mauve 


Dimensions: 


Model and colour: T726 mauve 

T725 

blue 

Plate / stew-bowl dome for 23-cm cutout 

Dimensions: 


Models and colours: T811G mauve 

T812G 

blue 

T813G 

evening blue 

Plate dome for 23-cm cutout 

Dimensions: 


Models and colours: T911G mauve 

T912G blue 

T915G burgundy 

Qty per case: 12 T711, T725, T726, T811G, T812G, T813G, T911G, 

T912G, and T915G 

24 T721A, T722A, T821, T822, T823, and T725B 


Non-Insulated Domes 

Non-insulated domes for entrée dishes. Made of high-quality dishwasher-proof polypropylene. 

These domes have been specially designed to prevent the aromas of the various meal 

components from mingling, and to keep the food on the plates free from dirt and dust. 

Dimensions: 

All non-insulated domes measure approx. 

241 mm in diameter, and 66 mm in height 

Models and colours RP50G mauve 

RP55G 

blue 

RP55G-DB 

evening blue 

RP52G 

transparent 


Breakfast Tray 

Cream-coloured tray, designed for use with Temp-Futura meal-distribution systems. 

This non-insulated tray has the same overall dimensions as the tri-Norm and the Euro-Norm 

versions of the Temp-Futura server, but it has no cutouts, and it is not made of 

highly heat-resistant plastic. The entire tray area is available for dishes, beverages, cutlery, 

the patient’s name-card etc. 

Dimensions: tri-Norm approx. 545 x 325 mm 

Euro-Norm 


Models: 

S710G (tri-Norm) 

G0550 (Euro-Norm) 

Qty per case: S710G 20 

G0550 1 

HACCP Reference Tray 

Reference tray which enables you to measure and document changes in temperature before, 

during and after regeneration, in accordance with HACCP guidelines. 

The reference tray consists of a Temp-Futura server and data logger. Attached to the server 

is a retainer which holds the data logger in place. The system further comprises a stew-bowl 

dome, a soup-bowl dome (incl. inside lid), and a reusable side-dish lid. A temperature sensor 

is attached to each of the domes and the side-dish lid. When the data logger is connected to 

the sensor and started, it begins to measure and record temperatures. The data recorded are 

read out when the data logger is connected to the PC in which the temperature-measurement 

program is installed. The computer program can generate printouts of the temperatures 

measured, and these can be archived. That means you can verify that your meal-regeneration 

and distribution operations comply with HACCP standards. 

The server with its fitting for the logger, and also the domes and side-dish lid with their fixed 

temperature sensors, can be washed by hand after the data logger is detached from the set-up. 

Models and colours RFT01 temp-rite standard 0/9/3, mauve 

RFT02 temp-rite standard 0/9/3, blue 

RFT11 Euro-Norm 0/9/5, mauve 

RFT12 Euro-Norm 0/9/5, mauve 

COMSOFT177 Software 



Temp-Induc 


Temp-Induc 

Induction works on the principle of electrical eddy currents. The undersides of the Temp-Induc 

plates and bowls have been given a special coating of silver. In the racks inside the carts, there 

are induction coils specially designed and positioned to supply exactly the amount of energy 

required to heat the specially treated Temp-Induc dishware. These coils release electromagnetic 

waves which create electrical friction in the silver coating on the plates and bowls. The energy 

thus released acts only on the silver coating. This means that food meant to be eaten warm (i.e. 

food in the coated dishes) is heated, but cold meal components in non-coated dishes remain 

cold. Temp-Induc ensures that the temperature of food is kept within preset parameters. Food 

temperature and quality are thus assured at every stage of the meal-distribution operation – in 

the kitchen, on the way to the wards, and at the location where the meals are served. 

Two different Temp-Induc tray systems are available. With its foam insulation, the tried and 

trusted Temp-Royal system can be relied on to retain heat long after the induction heating 

process has been completed. That means that temperature fluctuations in the kitchen before 

the meals are distributed are no longer a problem. And the knowledge that the meals will be 

at an ideal serving temperature when they reach the ward reduces stress, increases operational 

flexibility, and makes supervising and deploying staff much easier. If you prefer a pellet-based 

operation, Temp-Induc versions of Euro-Norm trays can be used with Temp-Rondo system 

components. 

B 

C 

D 

A 

Induction generator 

230/400V 

Diagrammatic representation of how induction works 

A: Chinaware with silver coating 

B: Serving tray 

C: Field of magnetic lines of flux 

D: Copper coil 

Carts 

Carts with chrome-nickel steel casings and induction heating systems are available for the 

tray-based Temp-Royal and the pellet-based Temp-Rondo meal-distribution systems. The doors 

are fitted with spring-loaded closing mechanisms. Blue plastic bumpers protect the cart from 

damage, even when the doors are open. Four full-length vertical push-bars are set between the 

bumpers, so that users of all heights can move the cart without difficulty. Passive and active 

cooling systems are available for Temp-Induc carts as optional extras. Each cart has two fixed 

and two swivel wheels. The standard cart wheels have sealed bearings, measure 160 mm in 

diameter, and are smooth-running and protected against rust. Other types of wheel can be 

supplied on request. 

2 induction coils per coil holder are provided for the regeneration of the meals in the cart. The 

regeneration time for all meals can be pre-programmed for the following 7 days by means of a 

membrane keyboard. Operational functions are indicated on an LCD display. 

Dimensions: 

Floor-space requirement: approx. 1,200 x 750 mm (16- and 20-tray carts) 

approx. 1,690 x 815 mm (24-tray cart) 

Height: 

approx. 1,431 mm (16-tray and 24-tray carts) 

approx. 1,661 mm (20-tray cart) 

Net weight: 

approx. 197 kg (16-tray cart) 



Wattage: 

approx. 3.7 kW, 230 V 

approx. 4.4 kW, 400 V (24-tray cart for Temp-Royal system) 

Models: 

IND016-* (16-tray cart) 



*TR = for Temp-Royal, EN = for Temp-Rondo pellet system 



Temp-Induc Rack 

Stationary induction rack made of chrome-nickel steel with integrated generator. Carts loaded 

with meals prepared on Temp-Royal trays or in Temp-Rondo pellets are coupled with the rack, 

and the meals are warmed to serving temperature by means of induction heating. Temp-Induc 

carts can be used in off-the-premises transport operations, and can be fitted with passive 

cooling systems. An active cooling system is available for the rack as an optional extra. 

In the rack, an automatic locking mechanism ensures that the system is ready to operate as 

soon as the cart is coupled up. Drive-in guides on each side of the rack interior facilitate accurate 

positioning of the cart. Once rack and cart have been coupled, the top part of the rack can 

be raised some millimetres by means of a lever. This establishes direct contact between the 

induction-coil holders in the rack and the trays in the cart. When the cart is separated from the 

rack, the induction heating is automatically switched off. 

The rack has its own powerful integrated generator, and has the same controls, and utilizes the 

same regeneration technology, as the induction carts. 

Rack Dimensions: 

Floor-space requirements: approx. 1,262 x 1,128 mm 

Height: approx. 1,603 mm (for 16-tray cart) 

approx. 1,833 mm (for 20-tray cart) 

Cart Dimensions: 

Floor-space requirement: approx. 1,049 x 691 mm 

Height: approx. 1,332 mm (16-tray cart) 

approx. 1,562 mm (20-tray cart) 

Net weight: approx. 131/116 kg (16-tray rack/cart) 

approx. 140/122 kg (20-tray rack/cart) 

Wattage: 

approx. 3.6 kW, 230 V 

Models: 

Rack: AND016- * (for 16-tray cart) 

AND020- 

* (for 20-tray cart) 

Cart: INA016- * (16-tray cart) 

INA020- 

* (20-tray cart) 

*TR = for Temp-Royal trays, EN = for the Temp-Rondo pellet system 


Temp-Induc Programming and HACCP Documentation 

The operating parameters for 21 meal sittings can be individually programmed. Authorized staff 

can pre-select which of the three available power settings will be required for the preparation 

of all the morning, midday and evening meals to be served over a seven-day period, and also 

pre-program the desired start and total running times, and the three-stage regeneration cycle. 

If a system error occurs, an error report and all the operating parameters are displayed. The 

display on the control panel also shows the time of day, and the parameters which apply for 

the program selected. In addition, the operating data for a period of between approx. 7 and 10 

days can be logged (in accordance with HACCP guidelines) by means of the control panel. 

Menu Manager Software 

This software is used to program Temp-Induc units to perform meal-preparation routines 

automatically for up to seven days. The Menu Manager is installed on a central PC. Seven-day 

instruction sets created by system users at the central PC can be transferred to the carts and 

racks in the wards (e.g. by means of the I-Button). Similarly, data logged in the wards during 

meal-distribution operations can be transferred to the central PC. 

Model: 0141112 Menu Manager software on CD 


Touch-COM Port Adapter (Interface) 

The port adapter is connected to the standard interface on a PC. This adapter enables the 

communication of data between the Menu Manager program on the computer hard disk and 

data carriers on carts. 

Model: 0141402 Interface (Touch COM Port Adapter) 


I-Button 

The I-Button is a data-storage chip in the form of a key fob. It can be used to transfer Menu 

Manager data back and forth between the central PC and the carts in the wards. The I-Button is 

well protected against dirt and everyday wear and tear. 

Models: 0141102 I-Button 



Temp-Royal 

See page 6 for more information. 

Temp-Rondo 

Traditional-look pellet system designed specially with the Temp-Induc system in mind. 

The Temp-Rondo induction range consists of various individual components, all of which 

will harmonize with the other components in your Temp-Induc system. The highly efficient 

insulating medium in the insulated pieces is a CFC-free polyurethane foam. All Temp-Rondo 

components have easy-to-clean surfaces made of a highly robust type of polypropylene that 

imparts absolutely no taste or smell to food. As well as being dishwasher-proof, they are 

lightweight and therefore extremely easy to handle in the wards. 

Tray 

A special Euro-Norm tray with positionings for induction-heating dishware is available for use in 

Temp-Induc carts and racks. 

Dimensions: 

approx. 530 x 370 mm (Euro-Norm) 

Model: 

I-G0550 (granite) 


Dome 

Plate dome made of special plastic with chromium steel lining. Used as the cover for Temp- 

Induc system plates. The dome minimizes condensation and aids the heating process. It is 

stackable, and has an integrated handle. Available in blue-grey. The rim of the dome fits around 

the rim of the plate underneath, which means a fair degree of protection against spillage is 

provided. 

Dimensions: 


Model: 

I-WOM17 


Server 

Insulated blue-grey server for 26-cm plate. Designed for use with Temp-Induc dome I-WOM17 

and tray I-G0550. With positionings for the 26-cm plate and for the china stew bowls designed 

for use with the Temp-Induc system. 

Dimensions: 

approx. 258 mm in diameter, approx. 31 mm in height 

Model: 

I-WUM17 


Soup Starter Bowl Insulator 

Blue-grey insulators for soup starter bowls. Designed for use with Temp-Induc tray I-G0550 and 

Temp-Induc I-P32… soup bowls. The covers are designed so that no additional lid is required 

for the soup bowls. 

Dimensions: 

Server: 


Cover: 



approx. 86 mm 

Models: 

Server: 

I-WUS17 

Covers: 

I-WOS17 


Dome for Soup Starter Bowls 

Non-insulated, dishwasher-proof blue-grey dome for the small soup starter bowls made of 

ABS plastic. These domes fit securely over the bowls on the server. They prevent the aromas of 

different meal components from mingling, and protect the food/soup in the bowls from dirt 

and dust as well as heat loss. 

Dimensions: 


Model: 

RP90G 



Temp-Classic 


Temp-Classic 

The Temp-Classic cart is equipped with a convection-heating system, and can thus be used to 

transport and regenerate chilled or deep-frozen foods, and to keep freshly prepared food warm. 

Its automatic timer provides the user with a greater degree of control over regeneration and 

heating procedures. This takes the guesswork out of preparing the food, which in turn makes 

for greater efficiency and cost-effectiveness in the distribution of meals. 

The standard version of the Temp-Classic cart (i.e. the Multigen II) has a heated compartment 

and an insulated compartment. However, a version of the cart with just a heated compartment 

(the Multigen I) and a cart with two heated compartments (the Multigen III) are also available. 

An active cooling system is available as an option for carts with an insulated compartment. 

Heated compartments with their own cooling systems can also be supplied. Further optional 

extras include a sneezeguard with an integrated scratch-resistant protective panel and infrared 

heating elements. In fact, Temp-Classic carts can be configured to meet just about any set of 

operational requirements. And, of course, each version of the cart can be equipped to provide 

HACCP-compliant logging of your meal-distribution operations. 

Dimensions: 

approx. 1,259 x 731 x 961 mm; 

height (incl. gantry): 1,417 mm 

Net weight: 

approx. 180 kg 

Wattage: 

at 230V/50Hz: approx. 3.1 kW 

at 400V/50Hz: approx. 7.8 kW 

Refrigerant: 

R134A 

Model: 

M62 


Shuttle System 

The long list of Temp-Classic accessories includes removable transfer modules. These modules 

are carried on a transfer trolley coupled to the Temp-Classic cart. Each trolley holds either one 

(the single version) or two (the twin version) transfer modules, which can be pushed quite 

easily from their docking positions on the trolley into the Temp-Classic cart. 

The transfer trolleys are robust and easily manoeuvrable. They are available in an open version, 

and also in an enclosed, insulated version. Insulation hoods made of a hard-wearing synthetic 

woven material can be supplied for both the single and the twin version of the trolley. These 

hoods prevent heat loss when food is being transported on open versions of the trolley. They 

are simply pulled over the trolley frame. 

The insulated version of the trolley is made of panels snapped securely into place around an 

aluminium frame. The walls and doors are sandwich constructions with insulating cores of 

CFC-free insulating foam. The doors are fitted with a well-designed and -constructed locking 

mechanism, and have a magnetic holding device which enables them to be kept open at 270°. 

The interior is divided into two compartments; the trolley exterior is protected by a low-level 

surround bumper. 

Dimensions: 

Trolley: 

Hood: 

Models: 

Trolley: 

approx. 997 x 668 x 910 mm (open version) 

approx. 950 x 740 x 960 mm (enclosed, insulated version) 

approx. 360 x 590 x 600 mm (for the single version) 

approx. 760 x 590 x 600 mm (for the twin version) 

M21.006 (open) 

M41.006 (enclosed, insulated) 

Hood: 

M20.028-1/2 (single, for 1 transfer module) 

M20.028 (twin hood for 2 transfer modules) 


See page 48 for further information about Gastro-Norm containers. 


Temp-Liquid 


Temp-Liquid 

temp-rite has a wide range of containers, cups, mugs and bowls for beverages and soups. 

Unless otherwise stated, these items have outer and inner walls with an insulating layer of 

polyurethane foam in between. The walls are made of a plastic that does not impart any smell 

or taste to food or drink. 

Drink-Tainer 

The Drink-Tainer is a single-piece, seamless container made of an extremely hardwearing, 

dishwasher-proof type of polyethylene. It is available in 5-, 10- and 19-litre versions. The 

removable lid has spring clips which are recessed for protection. The handles are integrated in 

the body of the container and so cannot be pulled off. All Drink-Tainers fit snugly on top of each 

other, so containers of different sizes can be stacked together with absolute safety. 

The scratch-resistant external surfaces are extremely hardwearing. The internal surfaces are 

smooth for ease of cleaning and hygiene. The lid has a rubber seal which guarantees a tight fit. 

Suitable for both hot and cold liquids. The tap is recessed and thus well protected from damage. 

Smooth pouring is guaranteed even when the Drink-Tainer is in continuous use. 

Dimensions: 

Floor-space requirement: approx. 430 x 240 mm 

Height: 5-litre version: approx. 390 mm 

10-litre version: 




Models: 5-litre versions: DT111G, honey 

DT112G, mocha 

DT114G, light grey 

DT115G, blue-grey 

10-litre versions: DT101G, honey 

DT102G, mocha 



19-litre versions: DT121G, honey 

DT122G, mocha 




Insulated Mugs 

Double-walled mugs, each with a capacity of 0.2 l. Available in two different designs (Standard 

and Allure). For use with the various meal-distribution systems. These dishwasher-proof 

mugs have large handles and wide rims, which makes them easy for elderly and handicapped 

people to use. The soft handle on the Allure version provides particularly comfortable and safe 

handling. Very good temperature retention. The wide range of available colours facilitates the 

identification of mugs reserved for special purposes. 

Dimensions: 

All mugs: 

approx. 86 mm Ø, approx. 86 mm in height 

Models: Allure design: ALM210, mauve 

ALM220, grey 

ALM230, evening blue 

ALM240, teal 

ALM250, burgundy 

Standard Design: K56, blue/white 

K57, brown/white 

K59, white 

K64, brown 

J275, blue-grey 

J276, cinnamon 

J277, mocha 

J278, honey 

J284, grey 

J286, mauve 

J287, burgundy 

J288, ivory J289, evening blue 

J290, blue 

J297, teal 



Lids 

A wide range of lids can be supplied as accessories. Lids can prevent messy spills, and thus aid 

the maintenance of high standards of cleanliness and hygiene. 

Model: B55G disposable polystyrene lid 

Qty per case: 2,000 

Model: B54G reusable polypropylene lid 


Model: H03G reusable polypropylene feeder top 


Model: K116 reusable polypropylene top to facilitate drinking 


Tumbler 

Non-insulated, single-walled 0.2-litre tumbler made of transparent plastic with a frosted 

surface. For use with temp-rite’s meal-distribution systems. The tumblers are stackable and 

dishwasher-proof. The lids designed for use with the insulated mugs will fit over this tumbler. 

Dimensions: 

approx. 86 mm in Ø, approx. 86 mm in height 

Model: 

K36 


Insulated Bowls 

Double-walled dishwasher-proof bowls. Available in two different ranges (Standard and 

Allure), and in 0.15-, 0.2- and 0.34- litre sizes. The wide rims of the 0.2- and 0.34-litre sizes 

make these bowls easy and hygienic for elderly and handicapped people to use. Very good 

temperature retention. Available in a wide range of colours, which facilitates the reservation of 

groups of bowls for specific purposes. 

Dimensions: 

0.15-litre bowls: 



approx. 84 mm in ø, approx. 66 mm in height 



Models: 

0.15-litre Allure design: 

0.2-litre Allure design: 

ALC310, mauve 

ALC320, grey 

ALC330, evening blue 

ALC340, teal 

ALC350, burgundy 

ALB210, mauve 

ALB220, grey 

ALB230, evening blue 

ALB240, teal 

ALB250, burgundy 

0.2-litre Standard design: K12, brown 

K13, white 

K132, blue 

K138, teal 

K144, burgundy 

K147, grey 

K148, mauve 

K149, cream 

K150, honey 

K151, cinnamon 

K152, mocha 

K154, evening blue 

K187, blue-grey 

0.34-litre Standard design: K160, cinnamon 

K161, mocha 

K162, honey 

K163, brown 

K189, white 

K188, blue-grey 

K191, teal 

K192, blue 

K193, mauve 

K196, grey 

K212, burgundy 

K214, evening blue 

Qty per case: 0.34- litre sizes 24 

0.15- litre sizes and 0.2- litre sizes 48 


Lids 

A wide range of lids can be supplied as accessories. Lids prevent messy spills, and thus aid the 

maintenance of high standards of cleanliness and hygiene. 

Model: B55G disposable polystyrene lid, 

fits the 0.15-litre Allure bowl 


Model: B71G disposable polystyrene lid, 

fits the 0.2- and 0.34-litre bowls 


Model: K03G reusable polypropylene lid, 

fits the 0.2- and 0.34-litre bowls 


Insulated Lid 

Insulated, reusable lid with incorporated sealing lip. Made of high-quality polypropylene. 

Approx 8 mm in height. Fits the 0.2- and 0.34-litre bowls. It can also be used with a 0.34-litre 

bowl in which china bowl P320OD has been placed. Dishwasher-proof (fits perfectly in 

dishwasher basket GW200). This lid will help keep the soup in the bowl warm for longer; it will 

also prevent spillages, and thus help staff maintain high standards of hygiene. 

Model: 

ID010 


Insulated Jugs 

Double-walled jug with lid. Each jug holds 0.3 l. The insulated lid helps prevent spills. The 

spout is specially shaped for drip-free pouring. The large handle makes it easy for elderly or 

handicapped people to pour from the jug. Very good temperature retention. Dishwasher-proof 

(fits in dishwasher rack GW100). 

Dimensions: 

Models: 


K301G, grey/white 

K302G, burgundy/white 

K303G, mocha/white 

K300G, replacement lid, white 

Qty per case: Jugs: 6 

Replacement lid: 1 

Thermos Jugs 

0.3-litre thermos jugs with high-gloss casing and removable hinged lid. The liquid contents 

are held in an insulated-glass receptacle. Between the casing and the insulated-glass 

receptacle there is an insulating layer of polyurethane foam that could be damaged by overly 

aggressive dishwashers. However, if reasonable precautions are taken, these jugs are relatively 

dishwasherproof. Available in a variety of colours. The jugs in this range have not been 

designed to match any specific temp-rite meal-distribution systems. 

Dimensions: approx. 114 mm in diameter, approx. 165 mm in height 

Models: 350G cream 

K350G-W white 


Glass Jugs 

Jugs made of hard glass that can withstand considerable degrees of mechanical stress, and 

sudden temperature changes. The wide rims facilitate filling and hygienic cleaning. Available in 

two sizes and various designs. The Quadro jugs have a non-insulated plastic top. 

Dimensions: 0.5-litre Arc-series jug: base ø approx. 120 mm; top ø approx. 95 mm; 

height approx. 141 mm 

1.0-litre Arc-series jug: base ø approx. 138 mm; top ø approx. 126mm; 


0.5-litre Quadro-series jug: base ø approx. 120 mm; top ø approx. 85 mm; 


1.1-litre Quadro-series jug: base ø approx. 121mm; top ø approx. 89mm; 


Models: 0.5-litre Arc-series jug 2036341 

1.0-litre Arc-series jug 2036358 

0.5-litre Quadro-series jug 3075201 

1.1-litre Quadro-series jug 3070361 

Qty per case: Model nos. 2036358, 3075201, 3070361 6 

Model no. 2036341 12 


Dishware 


1 = temp-rite pattern 2 = Fresia blue 3 = brown rim 4 = Fresia yellow F = Fantasia I = Inka A = Adria 

Dishware 

temp-rite offers an extensive selection of dishware for the 

ratious meal-distribution systems, as well as disposables dishes 

and lids, and items made of hardened glass or reusable plastic. 

Chinaware 

Top-quality hotel-ware china with extra-high glaze. All pieces 

have strong rims and are designed to withstand the wear 

caused by lowerators and industrial dishwashers. All patterns 

are inglazed, and are thus dishwasher-proof. The final digit 

of the article number indicates the pattern: 1 = temp-rite 

pattern, 2 = Fresia blue, 3 = brown rim, 4 = Fresia yellow, 

F = Fantasia, I = Inka, A = Adria 

Shallow Plate 

Models: 

bcfgiq P1100 approx. 23 cm Ø 

fgioq P1190 approx 23,5 cm Ø 

ahq P1200 approx 26 cm Ø 

dq P1400 approx 19 cm Ø 



Divided Plate 

Models: 

bcfgiq P1120 approx. 23 cm in Ø, divided in 2 

fgioq P1290 approx. 23.5 cm in Ø, divided in 3 

ahq P1320 approx. 26 cm in Ø, divided in 2 




Deep Plate 

Models: 



Stacking Cup, with Saucer 

Models: 

afghijopq P1130, cup; approx. 83 mm in Ø, and 53 

mm in height. Holds approx. 0.18 l 

afghijopq P1150, saucer; approx. 118.5 mm in Ø 

fghijoq P1250, saucer; approx. 139 mm in Ø 


Coffee Mugs 

Models: 

abcefghijop P1230 holds approx. 0.3 l; approx. 83 mm 

in Ø, and 85 mm in height 

abcefghijop P1230K “Euro-Line”, holds approx. 0.3 l; 

approx. 80 mm in Ø and 88 mm in 

height 

Qty per case: P1230, 6 

P1230K, 36 

Coffee Pots 

Models: 

afghijop P1170 

holds approx. 0.3 l; approx. 88 mm in Ø, and 

88 mm in height 

P1370 

holds approx. 0.3 l; approx. 90 mm in Ø, and 



Matching Lids for Coffee Pots 

Models: 

P1270 replacement lid for P1170 

RL10G grey plastic lid for P1370 

RL15G brown plastic lid for P1370 


Egg Cup 

Model: 

abcdefghi 

jklmnopq P1470 


Rectangular Side Dishes 

Models: 

abcdefghijopq P1140 large, straight-sided; 

approx. 176 x 111 x 34 mm 

abcdefghijopq P1160 small, straight-sided; 

approx. 114 x 87 x 33 mm 

abcdefghijopq P1240 large, rimmed; 

approx. 189 x 125 x 37 mm 

abcdefghijopq P1260 small, rimmed; 


abcdefghijopq P1540 large, high-sided; 

approx. 174 x 109 x 50 mm 

abcdefghijopq P1460 small, high-sided; 

Qty per case: 


6 large side dishes 

12 small side dishes 

Stew Bowl 

Models: 

abcfgiq P1180 conical, holds approx. 0.7 l; approx. 

176 mm in Ø and 50 mm in height 

abcdfgiq P1280 straight-sided, holds approx. 

0.9 l; approx.177 mm in Ø, 57 mm 

in height 

fgiq P1380 for Temp-Active, holds approx. 

0.9 l; approx. 190 mm in Ø, 50 mm 

P1980 

Qty per case: P1180 and P1980: 6 

P1280 and P1380: 3 

Lids for Stew Bowls 

Models: 

for P1180, P1280: 

for P1380: 

in height 

for Temp-Rondo, holds approx. 

1.1 l; approx. 213 mm in Ø, 51 mm 

in height 

PZ20G, disposable, external seal 

RP25G, white, reusable, internal 

seal 

RP26G, grey, reusable, internal seal 

RP25NG, burgundy, reusable, 

internal seal 

RP26NG, grey, reusable, internal 

seal 

W300, burgundy, reusable, internal 

seal 

for P1980: 

RL30G, grey, reusable, loose-fitting 

Qty per case: PZ20G, 400 

RP25/6G, RP25/6NG,W300, 50 

RL30G, 1 


Round Side Dishes 

Model: 

dfghijoq 


P1480, approx. 105 mm in Ø and 

50 mm in height; for use 

with Temp-Mediteran 

Soup Bowls 

Models: 

h P1880, holds approx. 0.43 l; 

approx. 139 mm in Ø and 

h 

q 


P320, for Temp-Rondo, holds approx. 

0.4 l; approx.123 mm 

in Ø and 57 mm high 

P1890, for Temp-Serve, holds 

approx. 0.25 l; approx. 100 

mm in Ø and 56 mm high 

Qty per case: P1880, P1890 6 

P320, 4 

Lids for Soup Bowls 

Models: 

for P1890: 

V461, reusable, transparent, 

loose-fitting 


Square Side Dish 

Model: 

fghioq P1650 approx. 117 x 117 mm, 38 

mm in height 



Model: 

RL20G plastic lid, reusable, grey, 

loose-fitting 

RL25G plastic lid, reusable, brown, 

loose-fitting 


a Temp-Royal 

b Bravo 

c Century II 

d Temp-Mediteran 

e Skandia 

f Pellet systems 

g Insul-Plus 

h Temp-Rondo 

i Temp-Active 

j Temp-Futura 

For use with the following systems 

k Temp-Futura 8 cm 

l Temp-Futura 13 cm 

m Temp-Futura 18 cm 

n Temp-Futura 23 cm 

o Temp-Induc used 

with a pellet system 

p Temp-Induc used 

with Temp-Royal 

q Temp-Serve 

Temp-Futura Chinaware 



caused by lowerators and industrial dishwashers. Patterned 

versions of the dishware are available on request. The china 

used in this range was designed specifically for use with the 

Temp-Futura system. 

Shallow Plate 

Models: 

nq 

P2000, approx. 23 cm in Ø 


Divided Plate 

Models: 

nq P2050, approx. 23 cm in Ø, 

divided in 2 

P2060, approx. 23 cm in Ø, divided 

in 3 


Deep Plate 

Model: 

nq 


Stew Bowl 

Model: 

nq 


P2010, approx. 23 cm in Ø, 30 mm 

in height 

P2080, cylindrical in shape, holds 

approx. 0.75 l; approx. 230 mm in Ø 

and 40 mm in height 


Models: 


internal seal 

RP35NG, azure blue, reusable, 

internal seal 



Soup Bowls 

Models: 

kq 

lq 

mq 

P320OD, holds approx. 0.2 l; approx. 

103 mm in Ø, 53 mm in height 

P330, holds approx. 0.25 l; approx. 


P340, holds approx. 0.25 l; approx. 

185 mm in Ø, 32 mm in height (also 

for stews) 

Qty per case: P320OD and P330: 12 

P340: 6 

Matching Lids for the Soup Bowls 

Models: 

for P320OD W100, burgundy, reusable, 

internal seal 

W100B, blue-grey, reusable, 

internal seal 

W101B, azure blue, reusable, 

internal seal 

for P330 

for P340 

W200, burgundy, reusable, 

internal seal 

W200B, azure blue, reusable, 

internal seal 


internal seal 

Qty per case: W100 and W200: 150 

W300: 50 

Blank Insert 

Models: 

k M880-S, approx. 104 mm Ø, 


Gravy Bowl 

Model: 

jq M220KV-S, approx. 67 mm Ø, 



Temp-Induc Chinaware 


have strong rims and will withstand the wear and tear that 

lowerators and industrial dishwashers sometimes cause. 

Patterned versions of the dishware are also available. 

The bases of all Temp-Induc dishes have a special inductive 

coating. 

Shallow Plate 

Models: 

op I-P1200 approx. 26 cm Ø 

I-P1190 approx. 23.5 cm Ø 

(for use with server I-WUM17) 


Divided Plate 

Models: 

op I-P1320 approx. 26 cm in Ø, 

divided in 2 

op I-P1220 approx. 26 cm in Ø, 

divided in 3 

op I-P1290 approx. 23.5 cm in Ø, 

divided in 3 (for use 

with server I-WUM17) 

Qty per case: I-P1320 and I-P1220: 2 

I-P1290: 6 

Stew Bowls 

Model: 

p 

o 

Temp-Royal version: 

I-P1280, holds approx. 0.9 l; approx. 


Temp-Rondo version: 



Qty per case: P1280: 2 

I-P1580: 4 


Models: 

for I-P1280: RP25NG, burgundy, reusable, 

internal seal 

RP26NG, grey, reusable, 

internal seal 

for I-P1580: RP85G, grey, reusable, loose-fitting 

Qty per case: RP25/6NG: 50 

RP85G: 1 

Soup Bowls 

Models: 

op 

op 





Qty per case: I-P320: 4 

I-P350: 6 


Models: 

for I-P320 

for I-P350 

RP80G, grey, reusable, loose-fitting 


internal seal 

Qty per case: RP80G: 1 

W100: 50 

Coffee Pot 

Model: 

op 




Lid for the Coffee Pot 

Model: 

RL10G, plastic, grey, loose-fitting 


a Temp-Royal 

b Bravo 

c Century II 


e Skandia 


g Insul-Plus 

h Temp-Rondo 

i Temp-Active 

j Temp-Futura 










q Temp-Serve 


Temp-Classic Chinaware 



caused by lowerators and industrial dishwashers. 

Glassware 

temp-rite’s hardened, white-glass tableware is highly 

resistant to heat and everyday wear and tear. It can be 

therefore be put in lowerators, and through industrial 

dishwashing systems. All items have been specially designed 

for use in temp-rite’s meal-distribution systems. 

Gastro-Norm (GN) Dishes 

Models: 

V348, approx. 310 x 165 x 55 mm, 

= GN 1/3 

V354, approx. 160 x 150 x 55 mm, 

= GN 1/6 


Lid for GN Dishes 

Overlapping flat lid for the GN 1/3 dish. Translucent. Stops 

food dehydrating during regeneration, or while being kept 

warm. 

Model: 

LV348 


Dishes for Gastro-Norm (GN) Containers 

China dishes for the more attractive presentation of food 

transported in disposable GN containers. Disposable dishes 

containing food are set in the china dishes at the worktop 

where meals are being served. The china dish fits so closely 

around the disposable dish that it looks as if the food is being 

served in chinaware. 

Model: 

V612, approx. 185 x 155 x 53 mm, 

for use together with disposable 

dish P.GN18.045 

V613, approx. 290 x 185 x 65 mm, 

for use together with disposable 

dish P.GN14.55 

Qty per case: V612: 4 

V613: 2 

Shallow Plate 

Models: 

ah A1200 approx. 26 cm in 

diameter 

bcfgi A1100 approx. 23 cm in 

diameter 


Divided Plate 

Model: 

ah A1220, approx. 26 cm in 

diameter, divided in 3 

A1620, approx. 26 cm in 

diameter, divided into 

3 equal sectors 


Stew Bowl 

Model: 

abcdfgi 


A1280, holds approx. 0.9 l; approx. 

175 mm in diameter and 57 mm in 

height 


Models: 



seal (not suitable for Bravo) 


(not suitable for Bravo) 


internal seal 

RP26NG, grey, reusable, internal 

seal 

Qty per case: PZ20G: 400 

RP25/6G and RP25/6NG: 50 


Side Dishes 

Model: 

abcdefghijopq 


Coffee Mugs 

Model: 

abcefghijop 

A1140, large, 

approx. 175 x 115 x 36 mm 

A1160, small, 


Qty per case: A1230: 12 

A123... 36 

A1230, approx. 79 mm in diameter, 

approx. 89 mm in height 

Dishware Made of Reusable Plastic 

All of these pieces were designed for use in temp-rite’s 

meal-distribution systems. Optimum matching with the 

various ranges is thus guaranteed. And it is perfectly safe to 

wash these sturdy items in industrial dishwashers. 

Plate 

Model: 

bcfgi 


Side Dishes 

Models: 

abcdefghijopq 

K95, approx. 230 mm in diameter, 

white 

K75, holds approx. 0.43 litres; 

approx. 185 x 119 x 33 mm, white 

abcdefghijopq B48, holds approx. 0.17 litres ; 

abcdefghijopq 

Qty per case: K75: 24 

B48: 48 

K335: 72 


K335, holds approx. 0.2 litres; 

approx. 127 x 96 x 29 mm, cream 

Rectangular Insert/Stew Dish with Lid 

Models: 

abcdfghijopq 

abcdfghijopq 


Rectangular Soup Dishes 

W10G, rectangular dish, holds 

approx. 0.5 litres, approx. 

164 x 100 x 50 mm, white 

W15G, lid, approx. 170 x 106 mm, 

white 

Model: 

abcdefghijopq 

K153, holds approx. 0.24 litres, 


abcdefghijopq 

K241, holds approx. 0.24 litres, 

approx. 122 x 96 x 43 mm, mauve 


Lid for Rectangular Soup Dishes 

Model: 

B21A, disposable polystyrene lid, 



Temp-Futura Soup Bowl 

Model: 

k 


J450, holds approx. 0.25 litres; approx. 

105 mm in diameter, 47 mm 

in height; cream 

Lid for Soup Bowl 

Model: 

B97S, disposable lid; 


Qty per case: 1.000 

Stew Bowl 

Model: 

abcd 


W1280, holds approx. 0.9 litres; 

approx. 175 mm in diameter, 

52 mm in height; white 

Lids for Stew Bowl 

Models: 



seal (not suitable for Bravo)) 


(not suitable for Bravo) 

Qty per case: PZ20G: 400 

RP25/6G: 50 

Lids/Domes for China and 

Glassware Side Dishes 

Models: 

7181.47, fits P1160, approx. 

90 x 120 x 30 mm, transparent 

7249.48, fits A1160, approx. 


7156.48, fits A1160, approx. 

88 x 117 x 15 mm, opaque 

7244.47, fits A1140, approx. 


7154.47, fits P1650, approx. 125 x 

125 x 30 mm, transparent 


Domes for China and 

Glassware Side Dishes 

Close-fitting lid, fits over two small rectangular side dishes, or 

one large one 

Model: 

RP40G, 

RP45G, 

RP46G, 

RP46G-DB, 

RP47G, 


(fits P1160, P1460, ) 


approx. 196 x 131 x 60 mm, blue 

approx. 196 x 131 x 60 mm, evening 

blue 

approx. 196 x 131 x 60 mm, 

transparent (fits P1160, P1460, 

P1140, P1540, P1260, P1240) 

Qty per case: RP40G: 50 

RP45G – RP47G: 100 


a Temp-Royal 


b Bravo 


c Century II 




e Skandia 




g Insul-Plus 

h Temp-Rondo 



i Temp-Active 

q Temp-Serve 

j Temp-Futura 


Lids for China Bowls and Dishes 

Models: 

RL10G, fits P1370, 

approx. 90 mm in Ø, grey 


approx. 90 mm in Ø, brown 

W100, fits P320OD, 

approx. 100 mm in Ø, burgundy 

W100B, fits P320OD, 

approx. 100 mm in Ø, blue-grey 

W101B, fits P320OD, 

approx. 100 mm in Ø, azure blue 

RP80G, fits I-P320, 


W200. fits P330, 


W200B, fits P330, 


RP25G, fits W1280, P1180, P1280, 

approx. 180 mm in Ø, white 

RP26G, fits W1280, P1180, P1280, 


RP25NG, fits P1180, P1280, 


RP26NG, fits P1180, P1280, 


W300. fits P340, 



approx. 193 mm in Ø, blue-grey 





RP30NG, fits P2080, 


RP35NG, fits P2080, 



approx. 117 x 177 mm, grey 


approx. 117 x 177 mm, brown 

Disposable Plastic Dishware 

Unless otherwise stated, these items are made of 

polystyrene, and should not be microwaved or exposed to 

contact heat. 

Main-Course Insert 

Model: 

abcdep A01G, holds approx. 0.43 litres ; 

approx. 101 x 165 x 27 mm 


Divided Main-Course Insert 

Model: 

abcdep A02G, holds approx. 0.23 / 0.12 

litres; approx. 101 x 165 x 27 mm 


Lid for A01G and A02G 

Model: 

C68G, approx. 191 x 130 x 28 mm 


Side-Dish Insert 

Model: 

abcdep 


Side-Dish Insert, Small 

Model: 

abcdep 


A05G, holds approx. 0.2 litres; 


A09A, holds approx. 0.12 litres; 


Main-Course Insert (Microwavable) 

Model: 

abcdep 


A44, holds approx. 0.43 litres; 

approx. 101 x 165 x 27 mm 

Material: polypropylene. 

Side-Dish Insert (Microwavable) 

Model: 

abcdep 


Juice Cup 

Model: 

abcdep 


A07A, holds approx. 0.2 litres; 




approx. 69 mm in diameter, 

approx. 56 mm in height 

Qty per case: 

LV348, fits V348, 

approx. 314 x 170 x 15 mm, translucent 

RL10/15G, RP80G, RP60G, RP85G, RL30G, 

RL20/25G, and LV348: 1 

W100 and W200: 150 

RP25/26G, RP25/26NG, W300, 

and RP30/35NG: 50 

Gravy Cup 

Model: 

abcdep 



approx. 69 mm in diameter, approx. 


Lid for A87G and A88G 

Model: 

B38G, approx. 73 mm in diameter 



Rectangular Soup Dishes 

Models: 

abcdep 

abcdep 

E04G, holds approx. 0.2 litres; 

approx. 108 x 80 x 40 mm. 


B27G, holds approx. 0.25 litres; 

approx. 96 x 122 x 43 mm. 


Qty per case: E04G: 1,000 

B27G: 700 

Lids for Rectangular Soup Dishes 

Models: 

E05G, fits E04G; 


B21G, fits B27G; 


Qty per case: 1E05G: 1,000 

B21G: 700 

Rectangular Stew Dishes 

Models: 

B11, holds approx. 0.4 litres; 

abcdep 

abcdep 

approx. 108 x 173 x 40 mm 


approx. 106 x 142 x 50 mm 


approx. 106 x 142 x 54 mm 

Qty per case: B11: 1,000 

E08G, E10G: 550 

Lids for Rectangular Stew Dishes 

Models: 

C08, fits B11; approx. 114 x 177 mm 

E15G, fits E08G and E10G; 


Qty per case: C08: 1,000 

E15G: 1,100 

Skandia Stew Dish 

Model: 

de 

C20G, holds approx. 0.7 litres; 

approx. 129 x 193 x 44 mm 


Lid for C20G 

Model: 

C25G, approx. 133 x 197 mm 


Lid for Insulated Mugs 

Lids for insulated mugs, 

K36 tumblers, and 0.15-litre Allure bowls. 

Model: 



Lid for Insulated Bowls 

Fits 0.2- und 0.34-litre insulated bowls. 

Model: 



Lid for Stew Bowls 

Fits china stew bowls P1180, P1280, A1280, W1280 

Model: 

PZ20G, approx. 179 mm in diameter 


Egg Cup 

Model: 

abcdep 

A17G, approx. 69 mm in diameter, 



Plate 

Model: 

bc 

PT11G, approx. 230 mm in diameter 


Divided Plate 

Model: 

bc 

PT12G, approx. 220 mm in diameter 


Egg/Coffee Spoon 

Model: 

BS01G, approx. 120 mm long 


Cutlery Bags with Printed Logo 

Model: 

BT25G, approx. 100 x 260 mm. 

Made of paper. 


Lid for J450 

Model: 

B97S, approx. 105 mm in diameter. 

Made of heat-resistant plastic. 


Lid for P320OD 

Model: 

R100, approx. 105 mm in diameter. 



Disposable Temp-Futura Plate 

Modell: 

m 

A43S, approx. 193 mm in diameter. 

Made of heat-resistant plastic. 


Half-Moon Temp-Futura Plate 

Made of heat-resistant plastic; 2 of these half-moon plates 

placed together in a retaining frame will fit the 23-cm (9“) 

plate compartment on a Temp-Futura server. 

Models: 

n 

n 

CO03001 retaining frame (reusable), 


DL01001 half-moon dish, approx. 

232 x 116 x 35 mm 

Qty per case: Retaining frames: 1 

Half-moon dishes: 456 


a Temp-Royal 


b Bravo 


c Century II 




e Skandia 




g Insul-Plus 

h Temp-Rondo 



i Temp-Active 

q Temp-Serve 

j Temp-Futura 


Kitchen and 

Serving Equipment 


temp-rite can offer an extensive range of units and components designed specifically to help 

you optimize your meal-distribution operations. With our special-purpose equipment, you 

can be confident that menu components are portioned at exactly the right temperature, and 

that the system components you use on a daily basis can be cleaned with a minimum of effort, 

and stored hygienically. All our carts and system components comply with the latest HACCP 

guidelines, and are designed to make life as easy 

as possible for your meal-service personnel. 

Portioning Equipment 

Meal Conveyor Belt 

Conveyor-belt system consisting of frame and superstructure. Metal superstructure components 

made of 1.4301 chrome-nickel steel. Belt drive and controls housed in motor casing located at 

one end of the conveyor. Meal trays are conveyed on either a wide belt composed of two layers 

of polyester coated with white PVC or, alternatively, in a version with two parallel polyester 

belts. The parallel belts are round-sectioned and measure 12.5 mm in diameter. The speed 

of the belt drive is infinitely variable between 3.5 and 18 m/min. The two basic belt types are 

available in a variety of versions. 

Dimensions: 

Worktop height: approx. 900 mm, adjustable by up to +/- 15 mm 

Work-surface width: approx. 500 mm, 

Belt width: 

approx. 300 mm, or 

Dist. between round belts: approx. 230 mm 

Conveyor length: as specified by the customer 

Wattage: 

dependent on the exact specification of the conveyor system 

Model: 

G0100 


Work Table 

Portioning table for temp-rite meal-distribution systems. Made of 18/8 chrome-nickel. 

All table edges are folded down and guaranteed free from roughnesses and sharp edges. 

Height-adjustable feet. The table can be finished to the customer’s requirements, and supplied 

with wheels, safety-standard-compliant sockets etc. 

Dimensions: 

Length: 

as specified by the customer 

Standard table width: approx. 800 mm 

Standard table height: approx. 900 mm 

Model: 

G0110 


Mobile Bains-Maries 

Frames and casings made entirely of 18/10 chrome-nickel steel. Seamlessly deep-drawn 

compartments for Gastro-Norm (GN) 1/1-size containers (or subdivisions of this standard 

container size). The individually heated compartments hold containers measuring up to 200 

mm in depth. The heating water is released through drain cocks in the base of the bainmarie. 

Draining is facilitated by the open supporting frame. Temperature in bain-marie 

thermostatically regulated, and infinitely variable between 30° and 95°C at each of 4 power 

settings. An optionally available foil heating system ensures a fast, even (and thus economical) 

transfer of heat. The unit is protected from knocks by the bumper rings fitted around the legs 

of the supporting frame just above each of the four wheels. The two push-handles are provided 

with integrated corner bumpers to protect the server’s hands. Fitted with 4 plastic swivel 

wheels, two of which have immobilizing brakes. Wheel diameter: 125 mm. Supplied with either 

2 or 3 compartments for Gastro-Norm 1/1-size containers. 

Dimensions: 

approx. 647 x 916 x 900 mm (2-container version) 

approx. 647 x 1,256 x 900 mm (3-container version) 

Net weight: 

approx. 44 kg (2-container version) 

approx. 55 kg (3-container version) 

Wattage: 

approx. 0.7 kW, 230 V AC per compartment 

Model: G0220 (2-compartment version with tubular heating elements) 

G0220F (2-compartment version with foil heating system) 

G0230 (3-compartment version with tubular heating elements) 

G0230F (3-compartment version with foil heating system) 



Chilled-Food Cart 

Cart for the chilled transport of meal components pre-cooled in Cook&Chill kitchens, and 

desserts (e.g. cold custards, fruit compotes) and cold meats prepared in the classical manner 

in Cook&Serve kitchens. Made entirely from 18/10 chrome-nickel steel. In the worktop there 

are two (or three) cutouts for gastro-Norm 1/1-65 containers (one per cutout). In each of the 

compartments below this, there are 7 pairs of runners designed to hold GN 1/1-65 containers; 

the vertical distance between each set of runners is 75 mm. The topmost insert racks are 

specially dimensioned to hold eutectic plates, so that the cart can be provided with a 

passive-cooling capability. The compartments are separated by special walls, each of which will 

hold one eutectic plate slotted in vertically. That means the GN containers set in the worktop 

cutouts and the containers in the bottom compartments are kept equally cool. The cart has 

two swivel wheels and two fixed wheels. The two swivel wheels are fitted with immobilizers. 

All of the wheels measure 125 mm in diameter, and are made of plastic. 

Dimensions: 

approx. 678 x 942 x 900 mm (2-compartment version) 

approx. 678 x 1,335 x 900 mm (3-compartment version) 

Load capacity: 

Top: 

2 or 3 single GN 1/1-65 containers 

Bottom compartments: 

12 or 18 GN1/1–65 mm containers 

Net weight: 

approx. 83 kg 

(version with 2 containers set in the worktop) 


(version with 3 containers set in the worktop) 

Model: G0260 (2-container version) 

G0270 (3-container version) 


Portioning Station 

Mobile racking unit made of 18/10 chrome-nickel steel. 6 sets of GN 1/1 containers can be 

set in the two top racks. Each cut-out section in the two top racks will accommodate one 

1/1 container (or 1/2+1/2 or 2/3+1/3 container-size combinations). The lower racks consist 

of containers held in 3 pairs of L-profile runners welded to the frame of the unit. Vertical 

distance between pairs of runners: approx. 75 mm. The mobile rack is fitted with 4 swivel 

wheels (diameter 125 mm); two of the wheels are fitted with immobilizing brakes. The unit is 

protected by 4 plastic bumper rings. 

Dimensions: 

approx. 1,170 x 868 x 877/1,107 mm 


15 Gastro-Norm 1/1 containers 

Max. weight per set or runners: approx. 30 kg 

Model: 

G0480A 


Plate Dispensers 

Made of 18/10 chrome-nickel steel. Two ergonomically shaped push-handles with integrated 

corner bumpers are provided flush with the top surface of the dispensing unit to protect both 

the server’s hands and the cart. When the cart is being pushed forward, its front end is well 

protected against knocks by two low-level corner bumpers. All plate dispensers are fitted with 4 

plastic swivel wheels, two of which have immobilizers. Wheel diameter: 125 mm. 

Unheated Plate Dispenser 

With two adjustable stacking tubes for plates measuring between 190 and 260 mm in 

diameter. 

Dimensions: 

approx. 460 x 852 x 900 mm 


max. 144 plates, depending on thickness of plates 

Net weight: 

approx. 31 kg 

Model: 

G2300 



Unheated Plate Dispenser with Cooling Slits 

Holds plates measuring between 190 and 260 mm in diameter in two adjustable stacking tubes. 

Dimensions: 

approx. 460 x 852 x 900 mm 

Load capacity: max. 144 plates, depending on thickness of plates 

Net weight: 

approx. 54 kg 

Model: 

G2250 


Statically Heated Plate Dispenser 

Plate-dispensing cart with static heating system. The cart has two dispensing tubes, each with 

a plate-holding mechanism which can be adjusted as required for plates measuring between 

190 and 260 mm in diameter. Supplied with two high, single-walled transparent hoods for 

the stacking tubes. Plate-heating temperature set by means of infinitely variable thermostatic 

control. Max. plate-heating temperature: approx. 70°C. The heater has four separate power 

settings. 

Dimensions: 

approx. 460 x 932 x 900 mm 


Net weight: 

approx. 55 kg 

Max. load weight: approx. 140 kg 

Wattage: 

approx. 0.9 kW, 230 V AC 

Model: 

G2304E 


Plate Dispenser with Circulating-Air Heating System 

The cart has two dispensing tubes, each with a plate-holding mechanism which can be adjusted 

as required for plates measuring between 190 and 260 mm in diameter. Supplied with two 

flat, double-walled transparent covers for the stacking tubes. Plate-heating temperature set 

by means of infinitely variable thermostatic control. Max. plate-heating temperature: approx. 

100°C. Four separate power settings provided. The circulating-air heating system – or energy 

module – is a compact unit consisting of a motor, fan wheel and heating elements. 

Dimensions: 

approx. 510 x 960 x 900 mm 


Net weight: 

approx. 55 kg 

Wattage: 


Model: 

G2314 


Plate Dispenser with Circulating-Air Heating System 

The cart has two dispensing tubes, each with a plate-holding mechanism which can be adjusted 

as required for plates measuring between 190 and 260 mm in diameter. Supplied with two 

high, single-walled transparent covers for the stacking tubes. Plate-heating temperature set 

by means of infinitely variable thermostatic control. Max. plate-heating temperature: approx. 

80°C. Four separate power settings provided. The circulating-air heating system – or energy 

module – is a compact unit consisting of a motor, fan wheel and heating elements. 

Dimensions: 

approx. 510 x 960 x 900 mm 


or 70 Insul-Solid/Insul-Max servers 

Net weight: 

approx. 55 kg 

Wattage: 


Model: 

G2314C (for plates) 

G2314C+ (for plates and Insul-Solid/Insul-Max servers) 



Heated-Inlay Dispenser 

Mobile dispenser for stacking Temp-Rondo inlays and heating them to a temperature of 130°C. 

Each of the stacks has its own double-walled insulated cover. The heating elements and the 

electrical components are easily accessible, and therefore easy to service. The energy module in 

the cart is a compact unit consisting of a motor, a fan wheel, and the heating elements. 

Dimensions: 

approx. 600 x 982 x 967 mm 

Load capacity: approx. 2 x 50 IH05 heating inlays 

Net weight: 

approx. 93 kg 

Wattage: 


Model: 

G2324 


Lowerators 

Temp-rite’s lowerators are made of 18/10 chrome-nickel steel. Two ergonomically shaped 

push-handles with integrated corner bumpers are provided flush with the top surface of the 

unit to protect both the server’s hands and the cart. The front end of the cart is well protected 

against knocks by two low-level corner bumpers. Each cart has two swivel wheels with 

immobilizers, and two fixed wheels. All of the wheels are made of plastic and measure 125 mm 

in diameter. 

Lowerator with Circulating-Air Heating System 

In this lowerator, the china bowls are stacked direct on the dispensing platform, which has 

four chrome-nickel-steel guide rods to hold the stacks in place. Supplied with plastic cover. The 

heating temperature is set by means of an infinitely variable thermostatic control. Max. heating 

temperature: approx. 80°C. Four separate power settings provided. The circulating-air heating 

system – or energy module – is a compact unit consisting of a motor, fan wheel and heating 

elements. 

Dimensions: 

approx. 760 x 995 x 900 mm; 

platform area: approx. 600 x 600 mm 

Load capacity: approx. 160 stew bowls or approx. 135 rectangular stew dishes 

Net weight: 

approx. 78 kg 

Wattage: 


Model: 

G2215 


Unheated Lowerator 

Heat-retaining plastic pellet components (or dishes) are stacked directly on the dispensing 

platform. 

Dimensions: 

approx. 760 x 902 x 900 mm; 


Load capacity: 150 – 200 heat-retaining pellet components for plates, or 

200 – 380 heat-retaining pellet components for starter soup bowls 

(depending on the version) 

Net weight: 

approx. 48 kg 

Model: 

G2305 


Lowerator with Cooling Slits 

For the storage in stacks of Temp-Rondo cooling inlays. These components are cooled when the 

lowerator is pushed into a cold room or refrigerated store. The slits in the lowerator housing 

allow cold air into the storage compartment where the inlays are stacked, and these are 

brought to the desired temperature within a short space of time. 

Dimensions: 

approx. 760 x 1,172 x 900 mm; 


Load capacity: approx. 300 cooling inlays 

Net weight: 

approx. 70 kg 

Model: 

G2305K 



Actively Cooled Lowerator for Plates or Racks 

The rack version keeps pre-portioned salad or dessert dishes placed on 500 x 500 x 75-mm 

racks at a low temperature. The plate version is used to cool plates measuring between approx. 

240 and 260 mm in diameter; the plates are stacked directly on the dispensing platform, 

which has 4 guide rods. The convection cooling system is controlled by means of an adjustable 

cooling module. The lowerator is supplied with an insulated stainless-steel top cover. Cooling 

from room temperature to 10°C takes around 90 minutes; dishware taken straight out of the 

dishwasher will cool to 0°C in around 120 minutes. 

Dimensions: 

approx. 761 x 1,092 x 900 mm 

Platform area of G2216K (rack) version: 


Platform area of G2216KT (dishware) version: approx. 540 x 540 mm 


G2216K = 7 racks 

G2216KT = 4 stacking columns 

(approx. 50 dishes per column) 

Max load weight: 


Net weight: 

approx. 75 kg 

Wattage: 

approx. 0.56 kW, 230 V / 50 Hz 

Model: 

G2216K 

G2216KT 


Rack Lowerators 

All of these lowerators are made of 18/10 chrome-nickel steel. Two push-handles with 

integrated corner bumpers are provided to protect the server’s hands and the cart. Fitted with 

4 plastic swivel wheels, 2 of which are braked and can be immobilized. All 4 wheels have a 

diameter of 125 mm. 

Open lowerator 

For transporting stacked racks. 

Dimensions: 

approx. 560 x 800 x 900 mm 


6 racks measuring 500 x 500 x 115 mm 

(L x W x H) 

Net weight: 

approx. 48 kg 

Model: 

G0610 


Lowerator with Circulating-Air Heating System 

For heating and transporting stacks of racks loaded with dishware. Supplied with plastic cover. 

The heating temperature is set by means of an infinitely variable thermostatic control. 

The dishware contained in the racks can be heated to a maximum temperature of approx. 80°C. 

Four separate power settings are provided. The convection heating system – or energy module 

– is a compact unit consisting of a motor, fan wheel and heating elements. 

Dimensions: 

approx. 760 x 855 x 900 mm 


6 racks measuring 500 x 500 x 115 mm 

(L x W x H). In terms of dishware, this 

corresponds to around 240 large (P1140) 

side dishes, or around 600 small (P1160) 

rectangular side dishes. 

Net weight: 

approx. 72 kg 

Wattage: 


Model: 

G2216 



Unheated Lowerator 

For the stacking and transportation of racks in an enclosed cart. 

Dimensions: 

approx. 760 x 712 x 900 mm 

Load capacity: 6 racks measuring 500 x 500 x 115 mm (L x W x H). In terms of 

dishware, this corresponds to around 240 large (P114…) side dishes, 

or around 600 small (P116…) rectangular side dishes. 

Net weight: 

approx. 43 kg 

Model: 

G2207 


Unheated Lowerator With Cooling Slits 

For the stacking and transportation of racks loaded with dishes. This lowerator can be pushed 

straight into a cold room or refrigerated store. The slits in the lowerator housing allow cold 

air into the storage compartment where the dishes are stacked, and these are brought to the 

desired temperature within a short space of time. 

Dimensions: 

approx. 760 x 712 x 900 mm 

Load capacity: 6 racks measuring 500 x 500 x 115 mm (L x W x H). In terms of 

dishware, this corresponds to around 240 large (P114…) rectangular 

side dishes, or around 600 small (P116…) rectangular side dishes. 

Net weight: 

approx. 42 kg 

Model: 

G2207KS 


Tray Dispenser 

Dispenser for the stacking and distribution of trays. Made of 18/10 chrome-nickel steel. Two 

push-handles with integrated corner bumpers protect the server’s hands and the cart. The front 

end of the dispenser is protected by two low-level corner bumpers. Fitted with 4 swivel wheels, 

2 of which are fitted with immobilizers. All 4 wheels are made of plastic, and have a diameter 

of 125 mm. 

Dimensions: 

approx. 510 x 800 x 900 mm 

Load capacity: approx. 120 trays 

Net weight: 

approx. 48 kg 

Model: 

G0620 



Gastro-Norm (GN) Containers 

GN containers and lids manufactured according to the specifications of DIN 66075. The 

containers have large corner radiuses; this guarantees perfect stacking. The lids are an exact 

fit. Made of 18/10 chrome-nickel steel, the containers are available in all sizes and depths, and 

with all the requisite accessories. 

2/1 GN 

Dimensions: 


Models: 

G0350 (20 mm deep, without handles) 


1/1 GN 

Dimensions: 


Capacity: 

container, 100 mm deep = approx. 14.0 litres 


Models: 

G0300 (200 mm deep, with upright or recessible handles) 

G0331 (100 mm deep with upright or recessible handles) 

G0370 (200 mm deep, with bow-type handles) 


2/3GN 

Dimensions: 


Capacity: 



Models: 



1/2 GN 

Dimensions: 


Capacity: 



Models: 





1/3 GN 

Dimensions: 


Capacity: 



Models: 





48 I temp-rite International 

1/4 GN 

Dimensions: 


Capacity: 



Models: 





1/6 GN 

Dimensions: 


Capacity: 



Models: 





Flat Lid with Recesses for Handles and Spoon 

Models: G0307 (GN 1/1) 

G0308 (GN 2/3) 

G0309 (GN 1/2) 

G0310 (GN 1/3) 

G0311 (GN 1/4) 

G0312 (GN 1/6) 


Flat Lid with Vulcanized Silicone Seal and 

Recesses for Bow-Type Handles. 

Models: G0390 (GN 1/1) 

G0392 (GN 1/2) 

G0393 (GN 1/3) 

G0394 (GN 1/4) 

G0395 (GN 1/6) 


Matching Bridges for GN Containers 

Models: 

G0337 (325 mm long) 

G0338 (530 mm long) 


Other GN containers and lids are available on request.

Mobile Gastro-Norm (GN) Tray Rack 

Tall Version 

18/10 chrome-nickel-steel trolley for GN 1/1 trays. The frame is made of sturdy 

square-sectioned tubing with cross-struts. The tray runners are welded to the frame. Fitted 

with bumpers and 4 swivel wheels, 2 of which have immobilizing brakes. 

Wheel diameter: 125 mm. Odour-repelling, food-friendly antistatic hood available as accessory 

for off-the-premises transport operations. 

Dimensions: 

Mobile tray rack: 

approx. 664 x 744 x 1,667 mm; 

Height between runners: approx. 75 mm 


36 GN 1/1 trays in 18 sets of runners 

Net weight: 

approx. 25 kg 

Models: 

G0400 (mobile tray rack) 

G0400A (protective hood) 


Low Version 

Mobile tray rack similar to G0400, but not as tall, and with a worktop. 

Dimensions: 

approx. 818 x 624 x 854 mm 


14 GN 1/1 trays in 7 sets of runners 

Net weight: 

approx. 20 kg 

Model: 

G0450 


Cool-Rite 

Air-curtain refrigerator which ensures that cold meal components are kept at temperatures 

which comply with HACCP recommendations. Inner panels and external casing made of 

chrome-nickel steel. When the door is opened, a curtain of cool air is formed across the 

opening, and this prevents the escape of cool air from the refrigerator, and the entry into it of 

warm outside air. Even if the door is kept open, the temperature inside the fridge will not rise 

above 5°C. Inside, there are nine sets of angled runners. The refrigerator will thus hold nine 2/1 

(i.e. 530 x 650 mm) GN trays or containers, or 18 GN 1/1 (i.e. 530 x 325 mm) containers. The 

Cool-Rite air-curtain refrigerator is fitted with 2 swivel wheels which can be immobilized, and 2 

fixed wheels. The diameter of each wheel is 150 mm. 

External dimensions: 

approx. 770 x 933 x 1,950 mm (not counting handle 

and wrap-around bumper) 

Internal dimensions: 

approx. 540 x 740 x 1,100 mm 

Volumes: 

approx. 585 litres gross; approx. 375 litres net 

Ambient temperature: +5°C to +25 °C 

Temperature range: 0°C to + 12 °C 

Wattage of refrigerating unit: 1,100 W 

Refrigerant: 

R-404a 

Electrical data: 

750 W, 230V/50Hz; 10-amp slow-blow fuse 

Model: 

CR010 



Storage 

Storage Racks, Dishwasher Racks 

temp-rite can supply a wide variety of racks for the storage and washing of the various lids 

and dishes in its meal-distribution ranges. These racks have been designed to perform specific 

functions, and dimensioned to hold specific types of article. 

Mug Rack 

Multi-purpose plastic rack. Particularly suitable for the washing and storage of insulated mugs 

and bowls. This rack has recessed handles. 

Dimensions: 

approx. 500 x 500 x 140 mm 

Typical load capacity: approx. 25 insulated mugs 

Model: 

G0700 


Dishware Rack 

Rack made of stainless-steel wire coated with heat-resistant plastic. Close-meshed. 

Models: and Dimensions: 

G0710 

G0720 

G0730 


approx. 500 x 500 mm , approx. 115 mm in height 



Dishware Rack 

Rack made of stainless-steel wire coated with heat-resistant plastic. Close-meshed. The dividers 

in the rack hold lids and discs vertically in place. 

Rack in which reusable lids (K03G) for insulated bowls can be cleaned. 

Dimensions: 

approx. 500 x 500 x 115 mm 

Load capacity: approx. 57 K03G lids 

Model: 

G0830 


Rack for the cleaning of RP25G and RP26G stew-bowl lids, or for the cleaning and storage of 

CD10G cooling discs. 

Dimensions: 

approx. 500 x 500 x 190 mm 

Load capacity: approx. 48 lids or cooling discs 

Model: 

G0835 


Rack in which lids for Temp-Futura soup-starter bowls (W200 etc.) and ID010 lids can be 

cleaned. 

Dimensions: 

approx. 500 x 500 x 142 mm 

Load capacity: 66 lids 

Model: 

GW200 


Rack for the cleaning of Temp-Futura stew-bowl lids (RP3...G, RP3...NG), or for the cleaning and 

storage of HD20G heating discs. 

Dimensions: G0836: approx. 500 x 500 x 245 mm 

G0836HD: approx: 500 x 500 x 214 mm 

Load capacities 

G0836: 44 lids or discs 

G0836HD: 54 HD20G heating discs 

Models: 

G0836 

G0836HD 



Rack in which lids (W100 etc.) for Temp-Futura soup-starter bowls, and lids for K300G jugs can 

be cleaned. 

Dimensions: 

approx. 500 x 500 x 111 mm 

Load capacity: 96 lids 

Model: 

GW100 


Rack for the storage of Temp-Futura side-dish covers (RP40G etc.). Has no dividers. 

Dimensions: 

approx. 500 x 500 x 142 mm 

Load capacity: 20 LRP40G lids; 

24 RP45G - RP47G lids 

Model: 

GRP4G 


Rack Cover 

Close-meshed cover which can be used with all 500 x 500 mm racks. Developed specially for 

GW100 and GW200. Made of stainless-steel wire coated with heat-resistant plastic. Keeps the 

items being washed in the rack in position. 

Dimensions: 


Model: 

GTOP50 


Cutlery Baskets 

Chrome-nickel-steel cutlery basket, with 8 compartments. All surfaces with openings. With 

fold-down handles. 

Dimensions: 

approx. 340 x 155 x 130 mm 

Model: 

G1000 


Cutlery basket made of high-quality plastic, with handles integrated in the narrow sides. All 

surfaces with openings. This basket has 8 compartments. 

Dimensions: 

approx. 430 x 210 x 155 mm 

Model: 

G1001 


Cutlery Tray 

Made of grey plastic. With 4 cutlery compartments. Space-saving design - can be stacked when 

empty. 

Dimensions: 

approx. 550 x 300 x 95 mm 

Model: 

G1005 


Wash Rack 

Made of chrome-plated steel wire. For the covers and servers of meal-distribution systems. 

Supplied with plastic base. 

Dimensions: 

approx. 500 x 500 x 135 mm 

Load capacity: 5 covers or servers 

Model: 

K53 


Wash Rack 

Plastic rack in which meal-distribution system components can be placed for dishwashing. 

Projecting fingers hold the items being washed in place. Open on one side. 

Dimensions: 


Load capacity: 5 covers or 9 servers 

Model: 

G0850 



System Trolley 

18/10 chrome-nickel-steel trolley. It consists of two tubular bow end sections, to which the 

trolley’s four rigid wire platforms are welded. The trolley is fitted with 4 swivel wheels, 2 of 

which have immobilizers. Wheel diameter: 125 mm. 

For Insulated Trays 

This trolley was designed to carry system servers and covers. 

Dimensions: 

Trolley: 

approx. 1,275 x 575 x 1,792 mm 

Distance between the platforms: approx. 400 mm (actual clearance) 


approx. 80 covers or approx. 90 servers 

Net weight: 

approx. 39 kg 

Total load-bearing capacity: approx. 200 kg (evenly distributed) 

Model: 

G1700 


For Pellet Systems 

This version of the trolley is designed to hold pellet servers and covers, as well as round Temp- 

Futura components, and the round components used in other systems. 

Dimensions: 

Trolley: 

approx. 1,275 x 615 x 1,792 mm 

Distance between the platforms: approx. 355 mm (actual clearance) 


approx. 200 Temp-Futura servers, 

or approx. 112 covers for Temp-Futura plates, 

or approx. 180 covers for Temp-Futura bowls, 

or approx. 224 pellet servers or covers 

Net weight: 

approx. 42 kg 

Total load-bearing capacity: approx. 200 kg (evenly distributed) 

Model: 

G1750 


Rack Dolly 

18/10 chrome-nickel-steel dolly for the storage and transport of metal-wire racks. Two plastic 

corner bumpers are attached to the frame just above the front wheels to protect the dolly from 

knocks. Fitted with 4 swivel wheels, 2 of which have immobilizers. All 4 wheels are made of 

plastic and have a diameter of 125 mm. 

Dimensions: 

approx. 580 x 710 x 1,025 mm 


12 racks measuring 500 x 500 x 115 mm (L x W x H), or 

20 racks measuring 500 x 500 x 75 mm (L x W x H) 

Net weight: 

approx. 12 kg 

Model: 

G2208 



Enclosed Ward Trolleys 

Made of Aluminium 

Enclosed ward trolleys made of matt-silver anodized aluminium. The trolleys contain no copper 

parts and are corrosion-resistant. The detachable doors open through 270°, and can be secured 

in this position by means of a magnetic locking device. The doors are opened and closed by 

means of an easily responding, lever-operated locking mechanism. Push-handles are provided 

at the front and rear of the trolley. An ID card holder is attached to the front end. Protection 

against knocks is provided by a low-level surround bumper. The trolley has two fixed wheels 

and two swivel wheels. All of the wheels measure 200 mm in diameter. The swivel wheels 

are fitted with immobilizers. An anodized galley rail, a towbar and towing coupling, and a 

chassis specially designed to withstand the rigours of cart-washing plants are all available as 

accessories. 

Dimensions: approx. 1,350 x 625 x 1,630 mm 

Net weight: approx. 75 kg 

Models: G2501 (with 3 compartments in which 39 Temp-Royal 

tray sets can be stacked on top of each other. Each 

compartment is provided with a horizontal divider.) 

G2503 

(with 3 compartments. Each compartment is fitted 

with sets of runners which will accommodate up to 

33 individual Temp-Royal tray sets.) 


Made of Aluminium and Insulated 

Enclosed ward trolley made mainly of aluminium, but with inside casing made of chrome-nickel 

steel. Outer casing in blue. With deep-drawn embossed gliders which will accommodate a 

variety of tray types. In the GN version of this trolley, the topmost sets of gliders are designed 

to hold cooling elements. User-friendly vertical push-handles made of steel tubing are provided 

at each of the four corners. The top surface of the trolley is enclosed by a galley rail which is 

joined to the four push-handles. The inside of the trolley is divided into either two (or three) 

compartments. Each compartment has eight (or ten) sets of gliders. The trolley has two swivel 

wheels with locking brakes, and two fixed wheels. All four wheels have a diameter of 160 mm. 

Dimensions: 

G2816GN: 

approx. 923 x 745 x 1,372 mm 

G2816EN: 

approx. 1,011 x 745 x 1,372 mm 

G2820GN: 

approx. 923 x 745 x 1,602 mm 

G2820EN: 

approx. 1,011 x 745 x 1,602 mm 

G2824GN: 

approx. 1,276 x 745 x 1,372 mm 

G2824EN: 

approx. 1,408 x 745 x 1,372 mm 

Vertical clearance between sets of gliders: approx. 115 mm 

Types of tray carried 

G28….GN: 

GN 1/1 or tri-Norm Temp-Futura trays 

G28….EN: 

EN 1/1 or Temp-Royal or EN Temp-Futura trays 

or Temp-Futura components complying with the 

EN standard 

Net weights G2816GN: approx. 70 kg 

G2816EN: 

approx. 80 kg 

G2820GN: 

approx. 85 kg 

G2820EN: 

approx. 90 kg 

G2824GN: 


G2824EN: 


Models: 

G2816GN / G2816EN: with 16 sets of gliders (2 x 8) 

G2820GN / G2820EN: with 20 sets of gliders (2 x 10) 

G2824GN / G2824 EN with 24 sets of gliders (3 x 8) 



Made of Stainless Steel 

Single-walled, enclosed ward trolley designed to hold Euro-Norm EN 1/1 trays (i.e. trays 

measuring 530 x 370 mm), or similarly compact types of tray. This cart has robust, 

double-walled wing doors that will open through up to 270°; these doors can be locked in 

the open position, and are protected by the surround bumper at all times. Incorporated in the 

central partition wall and the interior walls are seamlessly deep-drawn runners for trays. The 

vertical distance between the sets of runners is 115 mm. The surround bumper is designed 

in such a way that a coupling system can be attached to the trolley. The four 160-mm trolley 

wheels are held in zinc-plated and chromated casings. Two of the wheels are fixed; the other 

two wheels swivel and are fitted with immobilizers. 

Dimensions: G2716 : approx. 960 x 630 x 1,315 mm 

G2720: approx. 960 x 630 x 1,545 mm 

G2724: approx. 1,355 x 630 x 1,315 mm 

G2730: approx. 1,355 x 630 x 1,545 mm 

Load capacity: 16, 20, 24 or 30 trays 

Net weights: G2716: approx. 111 kg 

G2720: approx. 122 kg 



Models: 

G2716 

G2720 

G2724 

G2730 


Open Ward Trolleys 

Stainless Steel 

Open trolleys made of chrome-nickel steel. Designed to carry temp-rite meal-distribution 

systems. A push-handle is integrated in the tubular frame structure at one end of the trolley. 

The rear and side edges of the two trolley platforms are drawn up, while the front platform 

edges are turned down. The frame is fitted with four corner bumpers, and has a folding shelf at 

the handle end. Fitted with two swivel wheels with locking brakes and two fixed wheels. Wheel 

diameter: 125 mm. 

Dimensions: G1200: approx. 1,335 x 820 x 1,107mm 

G1300: approx. 1,335 x 610 x 1,107 mm 

Vertical clearance between the two platforms: 


Load capacities: G1200: 2 x 4 stacks of temp-rite meal-distribution systems 

= approx. 48 sets 

G1300: 2 x 3 stacks of temp-rite meal-distribution systems 

= approx. 36 sets 



Max. platform loads: G1200: top platform: approx. 140 kg; bottom platform: 


G1300: top platform: approx. 110 kg; bottom platform: 

approx. 75 kg 

Models: 

G1200 

G1300 


Nesting Trolleys 

Open trolleys made of chrome-nickel steel. Designed to carry temp-rite meal-distribution 

systems. A push-handle is incorporated in the frame structure. The trolleys nest together so as 

to save space. Each trolley has two platforms, both of which have turned-up edges on all four 

sides, and a bevelled plastic guide at the end opposite the handle to facilitate nesting. A folding 

shelf is attached to the frame under the push-handle. Fitted with 2 swivel wheels with locking 

brakes and 2 fixed wheels. All wheels measure 125 mm in diameter. 

Dimensions: 

approx. 1,335 x 690 x 1,125 mm; + 220 mm per trolley added to nest; 

vertical clearance between platforms: approx. 690 mm 

Load capacity: 2 x 3 stacks = approx. 36 meal-distribution sets 

Net weight: 

approx. 37 kg 

Max. load weights: top platform: approx. 110 kg; lower platform: approx. 75 kg 

Model: 

G1400 



Chromium-Plated Trolley 

Open transport trolley designed to carry temp-rite meal-distribution systems. Consists of 2 

wire platforms attached by means of tapered clamping joints to 2 sets of posts shaped so as to 

serve as push-handles. The trolley is made of high-gloss chromium-plated steel components 

sheathed in synthetic resin. Fitted with 4 swivel wheels, 2 of which are braked and can be 

immobilized. All the wheels have a diameter of 125 mm. 

Dimensions: 

approx. 1,220 x 530 x 1,010 mm; 

vertical clearance between platforms: approx. 550 mm 

Load capacity: 2 x 3 stacks of meal-distribution sets = approx. 36 sets 

Net weight: 

approx. 20 kg 

Max. load weights: top platform: approx. 110 kg; lower platform: approx. 75 kg 

Model: 

G1600 


Serving Trolleys 

Chrome-nickel steel serving trolley with two tubular bow ends, to which the trolley platforms 

are welded. The platforms have raised edges on all four sides. Fitted with four swivel wheels, 

two of which are braked and can be immobilized. Wheel diameter: 125 mm. 

Dimensions: G1120 and G1140: approx. 900 x 600 x 947 mm 

G1160 and G1180: approx. 1,100 x 700 x 1,020 mm 

Platform Dimensions: G1120 and G1140: approx. 800 x 500 mm 

G1160 and G1180: approx. 1,000 x 600 mm 

Number of platforms: G1120 and G1160: 2 

G1140 and G1180: 3 





Models: 

G1120 

G1140 

G1160 

G1180 


Platform Trolley 

Heavy-duty platform trolley (for loads of up to 600 kg). Made of chrome-nickel steel. 

Push-handle provided at one end. The stability of the frame-and-platform construction is 

increased by means of sturdy braces. The trolley is protected from knocks by 4 robust corner 

bumpers. Fitted with 2 fixed wheels, and 2 swivel wheels with locking brakes. 

Wheel diameter: 160 mm. 

Dimensions: 

approx. 1,405 x 660 x 900 mm 

Net weight: 

approx. 28 kg 

Model: 

G1100 



Move-Rite Cart Pull 

Small, highly manoeuvrable and extremely powerful electrical device for pushing and pulling 

heavy carts. The Cart Pull is very easy to steer and comes into its own in narrow passageways 

and very small rooms. It is also an extremely useful aid for moving carts into and out of lifts. The 

electrically powered Cart Pull can be coupled quickly and easily, as it has a coupling attachment 

which can be adapted to any type of cart, regardless of whether the cart in question is used to 

transport meals, laundry, or some other type of load. It is very user-friendly, and can be pushed 

or pulled without toppling or skidding. And even though it can push and pull loads of up to 750 

kg, the Cart Pull can be turned full circle on the spot. 

Dimensions: approx. 560 x 430 x 110 mm (L x W x H) 

Traction power: can shift loads of up to approx. 750 kg on level floors for up 

to 2 hours non-stop. 

Speed: 

approx. 2 to 6.5 km/h 

Net weight: 

approx. 40 kg 

Wattage: 

approx. 0.345 kW, 230 V. Requires charging 

(time required: approx. 2 hours). 

Model: 

MR001 



Other Products 


Aqua-Rite 

Unit for producing chilled still or sparkling table water from tap water. The aqua-rite tablewater 

unit was designed to meet the special hygiene criteria that apply at locations where 

preventing the spread of infection is critically important. Thus, the aqua-rite has an automatic 

cleaning device which disinfects the drain cock at set intervals. This regularly performed 

hygiene routine and temp-rite’s special filtering technology prevent the backward spread of 

microbes into this compact table-water fountain. 

The Aqua-Rite is a floor-standing unit with a dispensing tap protected by a fountain dome. A 

pressure gauge which displays the operating pressure in the CO 2 bottle is integrated in the back 

casing. A membrane keyboard for easy selection of the type and quantity of water required is 

set in the top casing under the dome. The temperature at which the water is dispensed can be 

set at between 2°C and 20°C, and the carbonation of the water is also selectable (up to 8g/l). 

Dimensions: 

approx. 700 x 380 x 900 /1,360 mm 

Output: 

approx. 60 l/h 

Weight: 

approx. 80 kg, not counting the CO 2 bottle 

Electrical data: 0.85 kW, 230 V / 50 Hz 

Pipe connections: external diameter of cold-water pipe: ½“ 

internal diameter of waste-water pipe: ½” 

(leading to a discharge siphon) 

Model: 

AR200INS 


Sealing Machine 

Manually operated heat-sealing machine, designed to seal disposable Gastro-Norm (GN) 

containers with heat-sealable plastic sheeting. The housing is made of stainless steel, the 

sealing frames in which the containers are set are made of aluminium coated with Teflon. A 

second sealing frame can be stored inside the housing. 

The sealing machine has an electronically operated control which monitors the sealing 

temperature in the range between 0° and 200°C. An acoustic signal which can be set at 

between 0 and 3 seconds indicates the completion of the sealing process. The heat-sealable 

plastic sheeting is fed to the sealing machine automatically from a roll. 

Dimensions: 

approx. 450 x 635 x 390 mm (heat-sealable plastic roll not included in 

height) 

Heat-Sealable plastic 

sheeting: 

max. roll width 340 mm; max. roll diameter 200 mm 

For use with: 

disposable 1/2 , 1/4 or 1/8 GN containers; max. pan height: 110 mm 

Weight: 

approx. 44 kg 

Wattage: 

1.0 KW, 230 V 

Model: 

1410V019 


Sealing Frames 

Models: 

0404V162 (1 x 1/2 GN) 

0404V176 (2 x 1/4 GN) 

0404V164 (2 x 1/8 GN) 


Heat-Sealable Plastic Sheeting (Supplied in Rolls of 300) 

Types: 

Qty per case: 

BUR-165300 (165 mm wide) 

BUR-340300 (335 mm wide) 

1 roll 

Disposable GN containers 

Models: 

P.GN14.55 (1/4 GN) 

P.GN18.045 (1/8 GN) 

Qty per case: P.GN14.55: 300 

P.GN18.045: 544 


Wheeled Bin 

4-wheeled rubbish bin with sturdy handles. For convenience, the bin lid can be hung from the 

side of the bin. Overhanging lid with handle in the middle. Bin made of chrome-nickel steel, 

and fitted with 4 corrosion-protected swivel wheels. Diameter of wheels: approx. 75 mm 

Dimensions: 


Capacity: 

50 litres 

Model: 

G0195 


System Accessories 

temp-rite can supply a variety of aids and accessories that will help you optimize your 

meal-distribution operations. Each item will complement a specific system, and may 

significantly increase its usefulness. 

Heating and Cooling Discs 

Hot and cold discs are available to help maintain the temperature of meal components in the 

central compartment of Temp-Royal trays. The discs are placed under the plate in the plate 

compartment. Both types of disc are dishwasher-proof and have been approved for use with 

food. The outer casings are made of a special type of plastic; the cold disc is filled with a cooling 

fl u i d . 

The hot disc is heated either in boiling water or in a rack lowerator with a fan heater. The cold 

disc is cooled to a temperature of approx –18°C in a cold room. 

Both types of disc can be cleaned either on the conveyor belt of a standard flight-type 

dishwashing machine, or in special washracks (G0836HD for hot discs and G0835 for cold discs). 

After cleaning, the discs are kept in storage racks. 

Dimensions: 

diameter of heating disc: approx. 205 mm 

diameter of cooling disc: approx. 180 mm 

disc thickness: 

approx. 10 mm 

Models: 

HD20G (heating disc) 

CD10G (cooling disc) 


Cooling Sachet 

Transparent plastic sachet filled with cooling gel. Keeps cold meal components in tray 

compartments cool for extended periods. Placed under china dishes held in rectangular 

side-dish compartments (1 sachet in small compartments, 2 laid side by side in large ones). 

Only usable with shallow dishes - otherwise tray covers will not fit snugly. The sachets are 

dishwasher-proof, and can be stored or cleaned in racks such as G0710. 

Dimensions: 

approx. 95 x 75 mm, 10 mm thick 

Model: 

CD15G 



Liners 

Liners are inserts for transporting meals to isolation wards, or off the premises. The shape 

of a liner matches the corresponding server exactly, which means that full heat insulation is 

maintained. The liner is placed in the server, and the dishes are then set in it. The use of liners 

greatly reduces the time and money required for disinfection routines in connection with the 

delivery of meals to isolation wards, since apart from the liner none of the system components 

enters the barrier zone. The amount of capital tied up in off-the-premises deliveries is also 

greatly reduced, for the liner is the only system component which remains with the recipient of 

the meal – all the other system components can be taken away immediately. 

Models: 

TTE80 Temp-Royal liner. Made of polystyrene; disposable, white 

BTE80 Bravo liner. Made of polystyrene; disposable, white 


Belt and Buckle Assembly 

Polyamide belt, approx. 2.5 m long, with self-locking buckle. Holds stacked tray sets securely in 

place during transportation. 

Model: 

J15G 


Menu-Card Holders for Insulated Trays 

The reusable menu-card holders clip securely onto the front rim of various temp-rite servers. 

The patient’s card is inserted in the holder. With the patient’s name clearly displayed at the 

front of the server-and-cover combination, portioning in the kitchen and the identification of 

meals in the ward are perfectly straightforward. The menu-card holders are made of a robust, 

dishwasher-proof type of plastic. 

Models: 

PK62NG for Temp-Royal 

PK60NG for Bravo and Temp-Mediteran 

PK61G for Skandia. With partial cover. 


For Pellet Systems 

Reusable menu-card holders made of chrome-nickel steel or blue plastic. Designed for use 

with pellet systems such as Insul-Max, Insul-Solid, Temp-Active or Temp-Rondo. The cards 

are inserted in the holder, which is then placed on the tray. The cards are easy to read, and 

being able to identify trays in this way greatly facilitates portioning in the kitchen, and meal 

distribution in the ward. The holders are suitable for all widely used card formats and paper 

thicknesses. The plastic card holders display the message “Guten Appetit”. 

Models: 

PK70G (chrome-nickel steel) 

PK75G (plastic) 


Clip-On Card Holder 

Made of high-quality CNS spring-band steel. Will clip on the front of most of the usual types 

of Euro-Norm or Gastro-Norm trays. The card holders will hold patient cards of most paper 

thicknesses, and in all the usual card formats. 

Model: 

PK80G 


Serving Tray 

Tray made of fibreglass-reinforced polyester. With moulded stacking lugs. Dishwasher-proof. 

Available in GN and EN 1/1 sizes. 

Dimensions: Gastro-Norm (GN): approx. 530 x 325 mm 

Euro-Norm (EN): approx. 530 x 370 mm 

Models: 

G0501 (GN, light grey) 

G0502 (GN, cream) 

G0550 (EN, cream) 


Other models and colours are available on request. 


Insulated Gloves 

For handling preheated plates on conveyor belts. The gloves are made of heavy cotton fabric 

and have a plush lining. The thumbs and palm are reinforced for better heat insulation. 

Available in one size only (25 cm). 

Model: 

Qty per case: 

K15G 

1 pair 

Temp-Tainer 

Containers for transporting large quantities of bulk food. The available storage space can be 

subdivided as required through the use of GN containers of varying sizes. The Temp-Tainer 

consists of a server box with a cover, and can be securely stacked. Only one cover is required for 

a stack consisting of three server boxes, which means the system is highly cost-efficient. The 

Temp-Tainer is made of a durable, seamlessly shaped polypropylene which imparts no taste 

or smell to food, and which can be thoroughly and conveniently cleaned in a dishwasher. The 

Temp-Tainer has a highly efficient insulating layer of polyurethane foam between its inner and 

outer walls, which means that food stored in it will remain at just about the ideal consumption 

temperature for several hours. 

Dimensions: 

approx. 620 x 417 mm; height of server box: 147 mm; height of cover: 

74 mm; height of set: 190 mm 

Load capacity: approx. 12 complete meals, i.e.14 litres of food held in 100 mm-deep 

GN 1/1 containers (or the corresponding subdivisions of 

such containers) 

Models: 

M20G Temp-Tainer server box, in brown 

M19G Temp-Tainer cover, in brown 


Thermoport 

Welded-polyethylene container with an insulating layer of CFC-free foam between its inner and 

outer walls. For the transport of food at temperatures of between -20°C and +100°C 

in 200 mm-deep GN 1/1 containers (or subdivisions of such containers). Sturdy clip locks and 

fold-down handles are provided at both narrow ends. The container and the lid can be stacked 

either as a combination, or separately. The Thermoport can be washed in dishwashers at 

temperatures of up to +90°C. 

Dimensions: 

approx. 640 x 365 x 308 mm 

Model: 

TP100K 


Beverage Containers 

Double-walled container made of chrome-nickel steel and insulated with polyurethane foam. 

For transporting and dispensing beverages. Large opening facilitates filling. The lid, which 

is spill-proof, is also made of chrome-nickel steel. Supplied with carrying handle (or carrying 

grips) and dispensing tap for filling teapots and coffee pots. 

Dimensions: 6-litre version: approx. 236 mm in ø, 400 mm in height 


approx. 251 mm in ø, 483 mm in height 

Models: GC006U: holds 6 litres 

GC010U: 

holds10 litres 



Thermometer 

For speedy, contact-free measurement (by scanning) of surface temperatures. Eliminates the 

risk of contamination through physical contact; verifies surface temperatures by measuring 

core temperatures at the centre of an oven or fridge compartment. Facilitates the monitoring of 

temperature-against-time curves in situations where compliance with HACCP guidelines has to 

be verified. Integrated light source illuminates the area where the temperature measurement is 

to be made (diameter of illuminated area: 12 mm). 

Temperature range of the infrared thermometer: -35°C to 275°C 

Measurement accuracy 

(at an ambient temperature of 23°C ±2°C): - between 0°C and 65 °C: ±1°C; 

- under 0 °C: ±1 °C ±0.1 K/K; 

- above 65 °C: ±1.5% of measured 

value 

Measurement range of the temperature sensor: -40°C to 200°C 

Measurement accuracy (at an ambient 

temperature of 23°C ±2°C): 

- between –5°C and 65 °C: ±1°C; 

- under -5 °C: ±1 °C; 

- above 65 °C: ±1.5% of measured 

value 

Diameter and length of the sensor: 

3 mm in ø, 80 mm in length 

Model: 

J12RT 


Eutectic Plate 

GN 1/1-size eutectic plate (i.e. cooling plate) made of plastic. Passive-cooling device for 

insertion in ward trolleys and carts with appropriately dimensioned runners. It is recommended 

that eutectic plates be pre-cooled to a temperature of not higher than –18°C. Depending on 

the refrigerating efficiency of the cooling environment, this is achievable within 12 – 24 hours. 

Dimensions: 

approx. 530 x 325 x 30 mm 

Net weight: 

approx. 4.4 kg 

Model: 

PC-TAW 




Food Service Solutions

With temp-rite International as your partner, you can be sure 

you have all the equipment you need for your in-house 

meal-distribution operations. Our products and services are 

backed up by temp-rite’s unrivalled experience in the creation of 

attractively designed and hard-wearing meal-service components. 

We can offer ready-to-use streamlined options that will exactly 

match your requirements. If you have any questions, do get in 

touch. We will be happy to place our experience at your disposal. 

If you would like to find out more right now, visit our website at 

www.temp-rite.eu. 

temp-rite International makes the difference!

temp-rite - ALVA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?