You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Using MIDI<br />
MIDI Parameters<br />
Parameter Explanation Value<br />
MIDI Tx<br />
Switch<br />
Upper Tx<br />
Channel<br />
Lower Tx<br />
Channel<br />
MIDI Rx<br />
Switch<br />
Upper Rx<br />
Channel<br />
Lower Rx<br />
Channel<br />
Tx Pitch<br />
Bend<br />
Tx<br />
Modulation<br />
Tx Program<br />
Change<br />
Tx Clock<br />
Tx Start-<br />
Stop<br />
Specifies whether MIDI messages<br />
will not be transmitted (OFF) or<br />
will be transmitted (ON).<br />
Specifies the transmit channel<br />
for the Upper Part.<br />
Specifies the transmit channel<br />
for the Lower Part.<br />
Specifies whether MIDI<br />
messages will not be received<br />
(OFF) or will be received (ON).<br />
Specifies the receive channel for<br />
the Upper Part.<br />
Specifies the receive channel for<br />
the Lower Part.<br />
This is an on/off switch for Pitch<br />
Bend message transmission.<br />
These messages temporarily<br />
raise or lower the pitch of the<br />
keyboard mode Tone.<br />
This is an on/off switch for<br />
Modulation message transmission.<br />
These messages apply vibrato to<br />
the keyboard mode Tone (control<br />
change CC#01).<br />
This is an on/off switch for<br />
Program Change message<br />
transmission. These messages<br />
are used to select Tones.<br />
This specifies whether MIDI Clock<br />
messages will be transmitted. Use<br />
this when you want a connected<br />
external MIDI device to<br />
synchronize to the GW-8.<br />
This specifies whether Start/<br />
Stop/Continue messages will<br />
be transmitted.<br />
Song mode: Start/Stop/Continue<br />
Style mode: Start/Stop<br />
OFF, ON<br />
1–16<br />
1–16<br />
OFF, ON<br />
1–16<br />
1–16<br />
OFF, ON<br />
OFF, ON<br />
OFF, ON<br />
OFF, ON<br />
OFF, ON<br />
Parameter Explanation Value<br />
Rx Sync<br />
Rx Pitch<br />
Bend<br />
Rx<br />
Modulation<br />
Rx<br />
Program<br />
Change<br />
This specifies how the GW-8<br />
will synchronize to an external<br />
MIDI device. Synchronization is<br />
available if the MIDI OUT<br />
connector of your external MIDI<br />
device is connected to the GW-<br />
8’s MIDI IN connector. (If you’ve<br />
made the opposite connection,<br />
refer to the owner’s manual for<br />
your external device.)<br />
This is an on/off switch for Pitch<br />
Bend message reception. These<br />
messages temporarily raise or<br />
lower the pitch of the keyboard<br />
mode Tone.<br />
This is an on/off switch for<br />
Modulation message reception.<br />
These messages apply vibrato<br />
to the keyboard mode Tone<br />
(control change CC#01).<br />
This is an on/off switch for<br />
Program Change message<br />
reception. These messages are<br />
used to select Tones.<br />
Using the GW-8 as a MIDI<br />
Sound Module<br />
If you want to use the GW-8 with an external MIDI sequencer,<br />
for example to create Styles, proceed as follows.<br />
1. Press [SONG] to put the GW-8 in Song mode.<br />
OFF, ON<br />
OFF, ON<br />
OFF, ON<br />
OFF, ON<br />
2. Press [PERFORM] so it’s lit, then use the VALUE dial to<br />
select the preset Performance “128: Init Performance.”<br />
MFX (p. 42) will apply only to the part that you play manually<br />
on the GW-8 (the Upper Part or Lower Part).<br />
Tx Song<br />
Position<br />
This specifies whether Song<br />
Position Pointer messages will<br />
be transmitted to indicate the<br />
currently playing position in<br />
Song mode. If you don’t want<br />
this message to be transmitted,<br />
choose the Off setting. This is<br />
valid only if [SONG] is lit.<br />
OFF, ON<br />
44
Change language