Genex GX9000 - SRTalumni.com
Genex GX9000 - SRTalumni.com Genex GX9000 - SRTalumni.com
GX9000 User manual Rev 2.1 System System Serial Number System Each GX9000 has a unique serial number. The serial number is accessible for reference purposes in the System menu. Software .Serial/ FPGA # nnnnn Revision System .FPGARev xx.xx.xx xx.xx.xx .FWarRev Vx.xx.xx You can use this setting to identify what revisions of software are currently installed in your GX9000. There are two separate revision numbers, the FPGA revision and the Firmware Revision. All software can be user upgraded as features are added to the operating system. Upgrades and other software can be found on the Genex Audio web site at: http://www.genexaudio.com Genex Audio Inc Page 61
GX9000 User manual Rev 2.1 System Sine Wave Generation Diagnose .SineGen :Rate :Level Hz dB These two menu settings will configure the internal digital sine wave generator. The generator can be used for calibration of internal and external devices and can be routed to any or all tracks from the “ROUTING” section of the setup menu. At present, the sine wave generator is only available in PCM mode. IT should not be used in DSD mode Genex Audio Inc Page 62
- Page 7 and 8: GX9000 User Manual Rev 2.1 Front Pa
- Page 9 and 10: GX9000 User Manual Rev 2.1 Menu Ope
- Page 11 and 12: GX9000 User Manual Rev 2.1 Working
- Page 13 and 14: GX9000 User Manual Rev 2.1 Working
- Page 15 and 16: GX9000 User Manual Rev 2.1 Working
- Page 17 and 18: GX9000 User Manual Rev 2.1 Working
- Page 19 and 20: GX9000 User Manual Rev 2.1 Projects
- Page 21 and 22: GX9000 User Manual Rev 2.1 Projects
- Page 23 and 24: GX9000 User Manual Rev 2.1 Projects
- Page 25 and 26: GX9000 User Manual Rev 2.1 Projects
- Page 27 and 28: GX9000 User Manual Rev 2.1 Projects
- Page 29 and 30: GX9000 User Manual Rev 2.1 Audio DS
- Page 31 and 32: GX9000 User manual Rev 2.1 Clocks D
- Page 33 and 34: GX9000 User manual Rev 2.1 Clocks C
- Page 35 and 36: GX9000 User manual Rev 2.1 Clocks W
- Page 37 and 38: GX9048 User manual Rev 2.1 Playback
- Page 39 and 40: GX9048 User manual Rev 2.1 Playback
- Page 41 and 42: GX9000 User manual Rev 2.1 Headphon
- Page 43 and 44: GX9000 User manual Rev 2.1 Recordin
- Page 45 and 46: GX9000 User manual Rev 2.1 Recordin
- Page 47 and 48: GX9000 User manual Rev 2.1 Recordin
- Page 49 and 50: GX9000 User manual Rev 2.1 Timecode
- Page 51 and 52: GX9000 User manual Rev 2.1 Timecode
- Page 53 and 54: GX9000 User manual Rev 2.1 The Take
- Page 55 and 56: GX9000 User manual Rev 2.1 The Take
- Page 57: GX9000 User manual Rev 2.1 Metering
- Page 61 and 62: GX9000 User manual Rev 2.1 Upgradin
- Page 63 and 64: GX9000 User manual Rev 2.1 Rear Pan
<strong>GX9000</strong> User manual Rev 2.1 System<br />
Sine Wave Generation<br />
Diagnose <br />
<br />
.SineGen <br />
<br />
<br />
:Rate<br />
:Level<br />
<br />
<br />
Hz<br />
dB<br />
These two menu settings will configure the internal digital<br />
sine wave generator. The generator can be used for<br />
calibration of internal and external devices and can be<br />
routed to any or all tracks from the “ROUTING” section of<br />
the setup menu.<br />
At present, the sine wave generator is only available in<br />
PCM mode. IT should not be used in DSD mode<br />
<strong>Genex</strong> Audio Inc Page 62