Genex GX9000 - SRTalumni.com
Genex GX9000 - SRTalumni.com Genex GX9000 - SRTalumni.com
GX9000 User manual Rev 2.1 Headphones and the Mixer Using Headphones Setting up the Internal Monitor Mixer Adding a Track to the Mix Bus An 8 into 2 digital mixer feeds the headphone output and is sent as a digital AES3 formatted data stream to the rear of the unit. At present the internal mixer is not available at PCM sample-rates of 176.4kHz and 192kHz. • Press a Mix button associated with a desired track. The Led will light green to indicate the track is enabled onto the mix bus. Pressing the Mix button also displays fader and pan settings in the alpha numeric displays. • Use the Jog Dial to adjust the gain of the channel, 00dB represents unit gain. • Press the Value Left and Value Right buttons to alter the pan position. The pan position varies between full left represented by 'L', centre, represented by '[]', and full right represented by 'R'. • Press the +/Store button to phase invert the selected channel. Phase inversion is represented by the phase symbol ””. • Press the -/Clear button to clear the phase inversion. • Press the Enter button to return the alpha-numeric display to the previous mode. Pressing the Enter button at any time while the unit is in default timecode mode will display the mixer parameters in the alpha numeric displays. Genex Audio Inc Page 43
GX9000 User manual Rev 2.1 Headphones and the Mixer Removing a Track from the Mix Bus Adjust the Pan Centre Depth Mixer .Pan ctr 0 -1dB -2dB -3dB -4dB -5dB -6dB • Press the Mix button so that the Led goes out. The gain at the central pan position can be adjusted between 0 and –6dB • Press the Setup button. • Rotate the Jog Dial to select the Mixer menu. • Press the Parameter Down button to display the Mixer menu options. • Rotate the Jog Dial to select the Pan Center menu. • Press the Value Left and Right buttons to select a gain value. • Press the Enter button to store the setting. Adjusting the Mixer Bit Depth Mixer .Bits Out 16 24 The bit depth of the mixer output can be toggled between 16 and 24 bits to allow copying to lower resolution media such as DAT. • Press the Setup button. • Rotate the Jog Dial to select the Mixer menu. • Press the Parameter Down button to display the Mixer menu options. • Rotate the Jog Dial to select the Bits Out menu. • Press the Value Left and Right buttons to select a bit depth. • Press the Enter button to store the setting. Genex Audio Inc Page 44
- Page 1 and 2: Genex Audio Inc GX9000 User Manual
- Page 3 and 4: What Does an ADL Contain? .........
- Page 5 and 6: GX9000 User Manual Rev 2.1 Transpor
- Page 7 and 8: GX9000 User Manual Rev 2.1 Front Pa
- Page 9 and 10: GX9000 User Manual Rev 2.1 Menu Ope
- Page 11 and 12: GX9000 User Manual Rev 2.1 Working
- Page 13 and 14: GX9000 User Manual Rev 2.1 Working
- Page 15 and 16: GX9000 User Manual Rev 2.1 Working
- Page 17 and 18: GX9000 User Manual Rev 2.1 Working
- Page 19 and 20: GX9000 User Manual Rev 2.1 Projects
- Page 21 and 22: GX9000 User Manual Rev 2.1 Projects
- Page 23 and 24: GX9000 User Manual Rev 2.1 Projects
- Page 25 and 26: GX9000 User Manual Rev 2.1 Projects
- Page 27 and 28: GX9000 User Manual Rev 2.1 Projects
- Page 29 and 30: GX9000 User Manual Rev 2.1 Audio DS
- Page 31 and 32: GX9000 User manual Rev 2.1 Clocks D
- Page 33 and 34: GX9000 User manual Rev 2.1 Clocks C
- Page 35 and 36: GX9000 User manual Rev 2.1 Clocks W
- Page 37 and 38: GX9048 User manual Rev 2.1 Playback
- Page 39: GX9048 User manual Rev 2.1 Playback
- Page 43 and 44: GX9000 User manual Rev 2.1 Recordin
- Page 45 and 46: GX9000 User manual Rev 2.1 Recordin
- Page 47 and 48: GX9000 User manual Rev 2.1 Recordin
- Page 49 and 50: GX9000 User manual Rev 2.1 Timecode
- Page 51 and 52: GX9000 User manual Rev 2.1 Timecode
- Page 53 and 54: GX9000 User manual Rev 2.1 The Take
- Page 55 and 56: GX9000 User manual Rev 2.1 The Take
- Page 57 and 58: GX9000 User manual Rev 2.1 Metering
- Page 59 and 60: GX9000 User manual Rev 2.1 System S
- Page 61 and 62: GX9000 User manual Rev 2.1 Upgradin
- Page 63 and 64: GX9000 User manual Rev 2.1 Rear Pan
<strong>GX9000</strong> User manual Rev 2.1 Headphones<br />
and the Mixer<br />
Removing a Track from the Mix Bus<br />
Adjust the Pan Centre Depth<br />
Mixer <br />
<br />
.Pan ctr<br />
<br />
0<br />
-1dB<br />
-2dB<br />
-3dB<br />
-4dB<br />
-5dB<br />
-6dB<br />
• Press the Mix button so that the Led goes out.<br />
The gain at the central pan position can be adjusted between 0 and –6dB<br />
• Press the Setup button.<br />
• Rotate the Jog Dial to select the Mixer menu.<br />
• Press the Parameter Down button to display the Mixer menu options.<br />
• Rotate the Jog Dial to select the Pan Center menu.<br />
• Press the Value Left and Right buttons to select a gain value.<br />
• Press the Enter button to store the setting.<br />
Adjusting the Mixer Bit Depth<br />
Mixer <br />
<br />
.Bits Out<br />
<br />
16<br />
24<br />
The bit depth of the mixer output can be toggled between 16 and 24 bits to<br />
allow copying to lower resolution media such as DAT.<br />
• Press the Setup button.<br />
• Rotate the Jog Dial to select the Mixer menu.<br />
• Press the Parameter Down button to display the Mixer menu options.<br />
• Rotate the Jog Dial to select the Bits Out menu.<br />
• Press the Value Left and Right buttons to select a bit depth.<br />
• Press the Enter button to store the setting.<br />
<strong>Genex</strong> Audio Inc Page 44