You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GX9000</strong> User manual Rev 2.1 Clocks<br />
Digital Clocks<br />
Clock Source<br />
When transferring digital data to and from an external device, it is essential to<br />
synchronize the source and destination devices. The choices are different for<br />
PCM and DSD modes.<br />
PCM and DSD<br />
• Press the Setup Button<br />
• Use the Rotary Wheel to select the Clocks menu.<br />
• Press the Parameter Down button and use the Rotary Wheel to select<br />
the Clk Src heading.<br />
• Use the Value Up and Value Down Buttons to select a clock source. The<br />
table below shows the available selections.<br />
Clocks <br />
<br />
.Clk Src <br />
<br />
Master<br />
AES Inp<br />
Ext Clk<br />
Vid --.--<br />
MADI<br />
The unit generates clocks internally.<br />
Use in PCM mode only. The unit<br />
automatically locks to the first available<br />
AES audio input.<br />
The unit locks to a word clock fed into<br />
the External Clock Input BNC connector<br />
on the rear panel.<br />
The unit locks to a Black and Burst<br />
video signal fed into the unit via the<br />
Video Input BNC connector at the rear.<br />
The video rate is automatically detected<br />
and displayed.<br />
The unit locks to the in<strong>com</strong>ing MADI<br />
stream if MADI a is fitted<br />
• Press the Enter button to confirm the selection.<br />
<strong>Genex</strong> Audio Inc Page 34
Change language