Genex GX9000 - SRTalumni.com

GX9000 User Manual Rev 2.1 Projects and File Handling
How are Project Files Named?
Files generated during record are automatically named by the GX9000. The naming convention will
depend on the selected file format and is described in the table below;
File Format File Naming Convention Description
DSD IFF Txxccccr.DFF Mono/Multichannel DSD IFF File
Txxccccr.CPT
Cue Point File
AES31-DSD Grrr_ccc.ADL AES31 style ADL with DSD extensions
Txxccccr.DFF
Grrr_ccc.CPT
Mono DSD IFF File
Cue Point File
AES31 Grrr_ccc.ADL AES 31 ADL (Audio Decision List) File
Txxccccr.WAV
Grrr_ccc.CPT
Broadcast Wave File
Cue Point File
Key x Channel identifier
r Random number based on internal timer
c Creation Count (auto increments for each new file/folder)
How to Locate Project Files on a Disk Volume
You can scan through all of the files on a disk volume using the Projects | Open menu. To
speed up the search and to avoid scanning through a large number of files that aren’t relevant,
program the Projects | Filter to display only the file extensions required. For example to
only search for ADL file types,
• Press the Setup button.
• Use the Rotary Wheel to select the Projects menu.
• Press the Parameter Down button and use the Rotary Wheel to display
the .Filter menu
• Press the Value Left and Right buttons to select the file extension
*.ADL. Note that the wildcard entry *.* will display all files within a
folder.
• Press the Enter button.
Genex Audio Inc Page 23