SPECIAL PRICES! - bei Carl Roth

Bring your lab in motion! 

Low prices at ... 

SPECIAL PRICES! 

Erlenmeyer flasks 

with baffles 

NEW 

at Roth 

Made of DURAN ® 

With three integrated baffles for better mixing 

Particularly excellent for cultivation S. cerevisiae 

Volume Largest outer ∅ Thread Height Art. No. Pack Qty. 

(ml) (mm) 

(mm) 

100 64 GL 25 109 LK17.1 1 

250 85 GL 32 149 LK18.1 1 

500 105 GL 32 180 LK19.1 1 

1000 131 GL 32 225 LK20.1 1 

, 21,00 

, 21,00 

, 23,65 

, 30,10 

TOP-OFFERS in this mailing 

Dispenser ceramus ® p. 9 

Rotilabo ® -microlitre pipettors 

Proline ® variable p. 15 

Precision thermometers 

Checktemp serie p. 23 

ROTH Cyclo II p. 27 

Contents 

Cleaning and care p. 2, 16, 17 

Disposal p. 30 

Filtration p. 31 

Geldocumentation p. 24 

Industrial safety p. 3, 26, 28,29 

Instruments p. 14 

Laboratory appliances p. 5, 10, 25 

Laboratory glass p. 3, 4 

Measuring technology p. 19-22 

Sampling p. 13 

Sampling storage + transport p. 6-8 

Storage + transport p. 18 

Storage of light sensitive samples p. 11 

Weighing technology p. 20 

Valid from 7. jan. 

to 28. feb. 2010

Cleaning 

SPECIAL PRICES! SPECIAL PRICES! 

High-grade steel cleanser Roti ® -Blank 

New with citric aroma. Semi-liquid paste to clean and protect all labware 

made of stainless steel, chrome, nickel, brass, copper or glass ceramics. 

Cleans and produces a dirt repelling long term shine. 

Identification marking: S: 1/2-26-28-46 

Art. No. Pack Qty € 

4888.1 2 x 250 ml 6,40 

Roti-Plasticlean ® 

Plastic cleaner with antistatic effect. Ideal for plastic casing, furniture and 

floors. Cleans and protects against embrittlement. 


1953.1 500 ml 10,70 

Cable cleanser 

To cleaning and degreasing stripped cables. 

Not suitable for plastic cables. 

Identification marking: éi f R: 10-38-43-50/53 · S: 2-24-37-60-61 


5235.1 1 l 10,70 

Label remover 

Pure vegetable. Dab on generously, allow to act, repeat if necessary, 

pull off label. Wipe off remaining glue with label remover. 

Identification marking: éi f R: 10-38-43-50/53 · S: 2-24-37-60-61 


2958.1 1 l 9,65 

Citric acid 

(Monohydrate) for removing lime deposits. Odourless, non-toxic, does not 

attack materials, biodegradable. For use dilute citric acid 1:10 in water. 

Identification marking: éi R: 36 · S: 24/25 


1818.1 Plastic container 1 kg 9,65 

Label remover with NSF certificate 

SOLVENT 50 SUPER specially for the food supplies, animal feed and 

packaging industries, hospitals and retail trade. Label remover with 

attachable dosing brush. Propellant: CO 2 . 

NSF K3-certified for use in foodstuff-related industries. 

Identification marking: è f éi R: 11-38-51/53-67 · S: 2-16-23-35-51 


KL91.1 1 x 200 ml can 7,00 

2

Labelling 

Laboratory glass 

NEW 


NEW 


GHS warning labels 

Made of PE-foil, 100 µm thick. permanent adhesive, waterproof, 

temperature stable from -20 to +80 °C. Trilingual: German, English, French. 

250 per roll in practical dispenser box. 

Dimensions: W 22 x H 30 mm 

Picture Pictogram Coding Signal Art. No. Pack 

€ 

word 

Qty. 

a Exploding bomb GHS01 Attention LN47.1 250 8,85 

b Exploding bomb GHS01 Danger LN48.1 250 8,85 

c Flame GHS02 Attention LN49.1 250 8,85 

d Flame GHS02 Danger LN50.1 250 8,85 

e Flame over circle GHS03 Attention LN51.1 250 8,85 

f Flame over circle GHS03 Danger LN52.1 250 8,85 

g Gas cylinder GHS04 Attention LN53.1 250 8,85 

h Chemical burns GHS05 Attention LN54.1 250 8,85 

i Chemical burns GHS05 Danger LN55.1 250 8,85 

j Skull and crossbones GHS06 Danger LN56.1 250 8,85 

k Exclamation mark GHS07 Attention LN57.1 250 8,85 

l Health hazard GHS08 Attention LN58.1 250 8,85 

m Health hazard GHS08 Danger LN59.1 250 8,85 

n Environment GHS09 Attention LN60.1 250 8,85 

Dimensions: W 27 x H 40 mm 

Picture Pictogram Coding Signal Art. No. Pack 

€ 

word 

Qty. 

a Exploding bomb GHS01 Attention LN61.1 250 10,70 

b Exploding bomb GHS01 Danger LN62.1 250 10,70 

c Flame GHS02 Attention LN63.1 250 10,70 

d Flame GHS02 Danger LN64.1 250 10,70 

e Flame over circle GHS03 Attention LN65.1 250 10,70 

f Flame over circle GHS03 Danger LN66.1 250 10,70 

g Gas cylinder GHS04 Attention LN67.1 250 10,70 

h Chemical burns GHS05 Attention LN68.1 250 10,70 

i Chemical burns GHS05 Danger LN69.1 250 10,70 

j Skull and crossbones GHS06 Danger LN70.1 250 10,70 

k Exclamation mark GHS07 Attention LN71.1 250 10,70 

l Health hazard GHS08 Attention LN72.1 250 10,70 

m Health hazard GHS08 Danger LN73.1 250 10,70 

n Environment GHS09 Attention LN74.1 250 10,70 

Warning labels 

Today's symbols (black pictogram on an orange yellow background) which are valid 

acc. to GefStoffV (Hazardous Substances Ordinance) will be replaced by the new 

symbols acc. to GHS (black pictogram in a red diamond). 

In addition to the pictogram, one of two possible signal words will describe the degree 

of endangerment:"Danger“ or "Attention“. 

As far as we presently know, the new labelling acc. to GHS will be valid for substances 

from 01.12.2010 and for mixtures from 01.06.2015. 

You will find the correct new pictogram on the current Material Safety Data Sheet for 

your chemical. 

➀ 

➀ Distilling bridges 

Made of DURAN ® . Cores parallel and vertical. 

Jacket length (mm) Core (NS) Art. No. Pack Qty. € 

150 14/23 KX82.1 1 16,70 

350 29/32 EE71.1 1 26,35 

➁ Distilling bridges 

Made of DURAN ® . Without condenser, with two vertical cores and sleeve 

standard ground joint 14/23. For distillation thermometers with 55 mm total 

length. 


350 29/32 KY60.1 1 32,20 

➀ 

➀ Distilling bridges 

Made of DURAN ® . Liebig condenser with vacuum stopper, 

sleeve NS 14/23. For distillation thermometers with 55 mm total length. 


160 14/23 KX49.1 1 53,25 

250 29/32 EE72.1 1 63,40 

400 29/32 EE73.1 1 68,60 

➁ Distilling bridges by Claisen 

Made of DURAN ® . Liebig condenser with vacuum stopper, sleeve standard 

ground joint 14/23. For distillation thermometers with 55 mm total length. 


160 14/23 KX45.1 1 56,90 

250 14/23 KX46.1 1 60,75 

250 29/32 KX47.1 1 63,35 

400 29/32 KX48.1 1 66,65 

➀ 

NEW 


➀ Distilling bridges by Claisen 

Made of DURAN ® . Liebig condenser with straight outlet, sleeve standard 



160 14/23 KX70.1 1 51,60 

250 29/32 KX71.1 1 58,05 

➁ Distilling bridges 

Made of DURAN ® . Liebig condenser with straight outlet, sleeve standard 



160 14/23 KX72.1 1 41,40 

250 29/32 KX73.1 1 47,00 

➁ 

➁ 

➁ 

NEW 


3

Laboratory glass - NEWS 


NEW 


NEW 


Gas washing bottles 

Made of DURAN ® . Standard ground joint 29/32, acc. to DIN 12463, with 

olive; Height of bottle: 200 mm. Delivery incl. attachment with two olives. 

(outer-∅ ca. 8 mm). 

Design 

Volume Bottle ∅ Art. No. Pack Qty. € 

(ml) (mm) 

➀ Without filter plate 100 40 KX61.1 1 21,45 



➁ With filter plate 100 40 KX64.1 1 32,75 



Accessories: 

Spare gas washing bottle 100 ml KX50.1 1 14,95 



Spare adapter without filter plate KX52.1 1 12,75 

Spare adapter with filter plate KX53.1 1 25,80 


Collecting flasks 

Made of DURAN ® . With spherical ground joint bowl S 35. 

Specially for rotary evaporators. 

Volume (ml) Outer ∅ (mm) Height (mm) Art. No. Pack Qty. € 

250 85 140 KY57.1 1 22,00 

500 105 155 KY58.1 1 24,15 

1000 131 200 KY59.1 1 30,05 

2000 166 245 KY65.1 1 47,75 

4 

NEW 


Round-bottomed flasks with cock (Schlenk flasks) 

Made of DURAN ® . With standard ground joint. Cock borehole: 2.5 mm. 

Volume Conical ground joint Height Art. No. Pack Qty. € 

(ml) (standard ground joint) (mm) 

25 14/23 85 KY38.1 1 36,80 

50 14/23 90 KY39.1 1 38,85 

50 29/32 90 KY42.1 1 38,85 

100 14/23 105 KY40.1 1 39,80 

100 29/32 105 KY43.1 1 40,35 

250 14/23 140 KY41.1 1 47,95 

250 29/32 137 KY44.1 1 45,30 

500 29/32 160 KY45.1 1 50,35 

1000 29/32 192 KY46.1 1 62,25 

Round flasks 

Made of DURAN ® . With standard ground joint acc. to DIN 12348. 

Autoclavable. 

* Not acc. to DIN. 

Transparent glass 

Volume Conical ground joint Flask-∅ Height Art. No. Pack € 

(ml) (standard ground joint) outside (mm) (mm) 

Qty. 

5* 14/23 30 58 HY49.1 1 6,10 

10* 14/23 35 70 HY50.1 1 6,05 

25* 14/23 41 85 E588.1 1 5,30 

25 19/26 41 85 KY27.1 1 5,95 

50 14/23 51 105 E589.1 1 5,50 

50 19/26 51 90 KY28.1 1 6,40 

50* 24/29 51 90 KY32.1 1 7,00 

50 29/32 51 105 E590.1 1 6,00 

100 14/23 64 115 E591.1 1 6,65 

100 19/26 64 105 KY29.1 1 7,00 

100* 24/29 64 105 KY33.1 1 7,45 

100 29/32 64 115 E592.1 1 6,75 

250* 14/23 85 140 KY26.1 1 12,90 

250* 19/26 85 140 KY30.1 1 13,95 

250* 24/29 85 140 KY34.1 1 12,80 

250 29/32 85 145 E593.1 1 12,05 

250 45/40 85 145 E594.1 1 28,55 

500* 19/26 105 168 KY31.1 1 21,40 

500* 24/29 105 165 KY35.1 1 16,35 

500 29/32 105 175 E595.1 1 15,90 

500 45/40 105 175 E596.1 1 23,60 

1000* 24/29 131 195 KY36.1 1 23,45 

1000 29/32 131 200 E597.1 1 22,15 

1000 45/40 131 200 E598.1 1 30,05 

2000* 24/29 166 260 KY37.1 1 42,95 

2000 29/32 166 260 E599.1 1 39,35 

2000 45/40 166 260 E600.1 1 45,30 

4000 45/40 207 315 E601.1 1 113,50

Stirrers and accessories 

SPECIAL PRICE! 


NEW 


Laboratory stirrers OST 20 digital complete set 

Laboratory stirrer OST 20 digital 

For maximum 20 l stirring volume. Robust, slim stirrer with digital display. 

Two speed ranges for universal applications from 60 to 2000 min -1 . 

Chuck range 0.5 to 10 mm. Push-through stirring tools. 

Technical specifications: 

Stirring volume (H 2 O) 

20 l 

Max. viscosity 

10 000 mPas 

Motor power: Input / output 

70 / 35 W 

Max. torque of chuck (at 100 Min -1 ) 

150 Ncm 

Speed range l 60 to 500 min -1 

Speed range ll 240 to 2000 min -1 

Arm-∅ / Length 

13 mm / 160 mm 

Dimensions (W x D x H) 

88 x 212 x 294 mm 

Weight 

3100 g 

Power supply 

230 V, 50 Hz 

Propeller stirrer model R 1342 

• 4-blade 

• Material AISI 316L 

• Stirrer dia. 50 mm 

• Shaft length 350 mm, shaft dia. 8 mm 

KPG-Stirrers with side stirring blade 

Made of DURAN ® . Stirring blade and securing screw made of PTFE. For 

NS 29/32. Length of ground and polished KPG-running surface 160 mm. 

Drive pin ∅ 8 x L 40 mm. 

For round bottom Agitator shaft Dimensions Art. No. Pack Qty. € 

flasks (ml) ∅ x L (mm) blade (mm) 

100 10 x 310 50 x 18 x 3 KL66.1 1 48,40 

250/500 10 x 310 68 x 24 x 3 KL67.1 1 49,45 

1000/2000/ 10 x 390 75 x 24 x 3 KL68.1 1 51,60 

3000 

4000/5000 10 x 480 125 x 24 x 3 KL69.1 1 70,95 

NEW 


Delivery includes OST 20 digital complete set: 

Laboratory stirrer OST 20 digital, propeller stirrer Model R 1342, plate stand 

and cross sleeve. 

Art. No. Pack Qty. € 

KX04.1 1 699,00 

Flexible glass agitator coupling 

For stirring in glass apparatus with KPG-stirrers. Counterbalances any 

inexactness in assembly. An exact alignment of agitator motor and shaft is 

unnecessary. Operates as an elastic link between laboratory stirrer and 

agitator shaft. Ideal for motor shafts with 10 mm chucking capacity and 

stirring tools with ∅ 8 to 10 mm shaft. 


KL60.1 1 73,85 

Accessories for KPG-stirrers 

Made of DURAN ® . 

➀ KPG-bearing sleeve (stirring stopper) 

Core: standard ground joint 29 /32. Contact surface ground and polished. 

Nominal ∅ (mm) Length (mm) Art. No. Pack Qty. € 

10 125 KX58.1 1 41,85 

➁ KPG-agitator 

Shaft contact surface ground and polished. 

Nominal ∅ (mm) Length (mm) Art. No. Pack Qty. € 

10 240 KX59.1 1 21,45 

5

Storage and transport 

Rotilabo ® -lab dishes 

Made of MF. Temperature stable from -40 to +110 °C. 

Length, top (mm) Width, top (mm) Height (mm) Art. No. Pack Qty. € 

190 150 40 8449.1 1 7,90 

290 160 35 8453.1 1 10,55 

290 160 60 8454.1 1 13,45 

350 250 40 8455.1 1 21,10 

340 245 100 8457.1 1 27,45 

Rotilabo ® -lids 

Made of PS. Suitable for Rotilabo ® melamin laboratory bowls. 

Length, top (mm) Width, top (mm) For Art. No. Pack Qty. € 

190 150 8449.1 P163.1 1 9,35 

290 160 8453.1/8454.1 P164.1 1 10,45 

340 245 8457.1 P165.1 1 15,60 

Rotilabo ® -aluminium bowls 

With transparent lid. Made of PS. Rectangular, conical. 

Capacity approx.160 ml. Bottom 74 x 38 mm. 


Length, top (mm) Width, top (mm) Height (mm) Art. No. Pack Qty. € 

106 64 38 1253.1 50 10,70 

Sekuroka ® -wide neck barrels 

Made of HDPE. UN-approval (X-approval) for storage and transport of solid 

materials and pastes. Approved for food, chemical and pharmaceutical 

products. Impermeable to air, water and water vapours. Maximum filling 

temperature 80 °C. 

Volume ∅ ∅ neck interior Height Art. No. Pack 

€ 

(l) (mm ) (mm) 

(mm) 

Qty. 

3,6 198 136 173 K280.1 1 9,15 

6,4 198 136 265 0788.1 1 12,70 

10,4 274 204 239 L958.1 1 19,30 

15,4 274 204 328 0789.1 1 23,55 

20 274 204 418 L959.1 1 26,35 

26 316 204 426 0790.1 1 28,95 

42 410 282 416 CY90.1 1 41,40 

55 410 282 518 CY91.1 1 44,65 

68,5 410 280 632 5459.1 1 47,85 

Rotilabo ® -aluminium foils 

Ideal for covering up, wrapping and insulating. Approved for food handling. 

Al-content over 99.5 %. In carton with cutter edge. 

*four refill rolls without tear-off box 

Thickness (μm) Width (mm) Length (m) Art. No. Pack Qty. (roll) € 

12 295 150 1399.1 1 20,70 

13 300 20 0192.1 6 22,70 

15 300 150 AA76.1 1 22,60 

15 450 150 AA77.1 1 38,40 

16 300 100 1770.1 1 18,40 

16* 300 100 1770.2 4* 68,40 

18 440 150 1502.1 1 42,65 

20 450 150 0954.1 1 49,35 

30 500 100 2596.1 1 55,95 

Rotilabo ® -foil cutters 

Made of coated metal. To store and cut aluminium foil with projecting 

cardboard tube ends. Very stable. Can be attached to walls. 

to width (mm) Art. No. Pack Qty. € 

300 6582.1 1 29,00 

450 6583.1 1 31,00 

6

Containers 

Rotilabo ® -wide neck containers 

Made of hard PVC clear or amber, or clear PETG. Square. 

With black screw-on cap made of PP. Excellent for packing and storing 

samples, pastes, liquids, solids, powder, granulates, small lab parts etc. 

Wide neck enables easy filling. 

PVC clear 

Volume Length of a ∅ neck Height without Art. No. Pack € 

(ml) side (mm) interior (mm) cap (mm) 

Qty. 

50 38 23 60,5 H312.1 25 16,15 

100 46 31 71 H313.1 24 17,20 

200 59,5 41 88,5 H314.1 14 15,70 

300 67,5 41 95 H315.1 15 17,35 

500 80,5 54 108 H316.1 10 17,35 

750 91,5 69 120 H317.1 10 21,50 

1000 97,5 69 144 H318.1 8 17,75 

2000 122 69 187 H319.1 4 15,80 

PVC amber 

Volume Length of a ∅ neck Height without Art. No. Pack € 

(ml) side (mm) interior (mm) cap (mm) 

Qty. 

50 38 23 60,5 H320.1 25 16,70 

100 46 31 71 H321.1 24 17,75 

200 59,5 41 88,5 H322.1 14 18,85 

300 67,5 41 95 H323.1 15 19,25 

500 80,5 54 108 H324.1 10 21,00 

750 91,5 69 120 H325.1 10 24,05 

1000 97,5 69 144 H326.1 8 19,00 

2000 122 69 187 H327.1 4 15,60 

Rotilabo ® -screw cap containers 

Made of PP, transparent. Leakproof screw cap (PE). With subdivisions. 

Ideal for storing liquids, solids, tissue samples, small parts and paste. 

Sterile version with safety label over lid and container which tears when 

opened. 

Unsterile 

Volume (ml) ∅ (mm ) Height (mm) Art. No. Pack Qty. € 

20 31,2 42,7 EA72.1 1000 153,20 

20 31,2 42,7 EA72.2 100 23,80 

40 43,4 40,6 EA73.1 600 120,40 

40 43,4 40,6 EA73.2 100 29,30 

60 43,4 59,2 EA74.1 500 86,55 

60 43,4 59,2 EA74.2 100 22,20 

90 43,4 74,7 EA75.1 400 77,95 

120 51,3 78,5 EA76.1 300 64,30 

Sterile 

Volume (ml) ∅ (mm ) Height (mm) Art. No. Pack Qty. € 

60 43,4 59,2 EA77.1 500 123,65 

90 43,4 74,7 EA78.1 400 98,10 

120 51,3 78,5 EA79.1 300 92,45 

S 


Rotilabo ® -sample bowls 

Made of aluminium. Flat, without lid. Reusable. 

Volume (ml) Height (mm) ∅ top, outside (mm) Art. No. Pack Qty. € 

28 13 64 5494.1 100 7,50 

125 26 96 5496.1 100 12,85 

Rotilabo ® -canisters 

Made of PP. Graduated. Outer-∅ wide-neck opening 79 mm. Lid made of 

PE. Push-Pull valve enables simple, controlled and drip-proof pouring. 

➀ With vertical and horizontal graduation 

Volume (l) Dimensions L x W x H (mm) Art. No. Pack Qty. € 

3 115 x 245 x 160 HT07.1 1 3,50 

4 115 x 245 x 201 HT08.1 1 3,50 

➁ With vertical graduation 

Volume (l) Dimensions L x W x H (mm) Art. No. Pack Qty. € 

2,5 333 x 133 x 232 HT09.1 1 3,50 

3,5 333 x 133 x 295 HT10.1 1 3,50 

7

Sample storage and transport 


Plastic tubs 

Made of high-quality PE. Chipproof and breakproof. Hygienic. Resistant 

against most acids and alkali. Temperature stable from -40 to +110 °C. 

C973.1 suitable for lab cart C972.1. 

Colour Length (mm) Width (mm) Height (mm) Art. No. Pack Qty. € 

red 800 550 300 C973.1 1 53,55 

white 900 550 360 E285.1 1 69,90 


Rotilabo ® -sample tins with snap-on lid 

Made of PP, with attached lid. Lid can be affixed vertically. With labelling 

area and graduation (except Art. No. EP22.1). Waterproof. 

Temperature stable from -20 to +121 °C. 

Is autoclavable with open lid. Sterile model is γ-sterilized. 

Sterile 

Volume Design ∅ inner Height Art. No. Pack Qty. € 

(ml) 

(mm) (mm) 

50 sterile 31 78 EP25.1 650 69,85 

90 sterile 43 80 EP27.1 350 59,15 

300 sterile 75 88 EP29.1 240 80,65 

Unsterile 

Volume Design ∅ inner Height Art. No. Pack Qty. € 

(ml) 

(mm) (mm) 

45 unsterile 29 85 EP22.1 650 60,15 

50 unsterile 31 78 EP24.1 650 60,15 

90 unsterile 43 80 EP26.1 350 48,35 

300 unsterile 75 88 EP28.1 240 70,90 

S 

Rotilabo ® -airtight storage boxes 

Topaz. Made of PS. Reversible lid, can either pushed on tightly or with vent 

slots between lid and container. Stackable. Approved for food handling. 

Volume (ml) L x W x H (mm) Art. No. Pack Qty. € 

500 100 x 100 x 65 4924.1 5 10,70 

1000 200 x 100 x 65 4929.1 5 11,80 

2000 200 x 200 x 65 4933.1 5 24,70 

Rotilabo ® -sample bags 

Made of glass-transparent LDPE. Press down on strip to seal. Also feature 

white write-on lines for labelling on one side. 50 µm thick. 

Width (mm) Height (mm) Art. No. Pack Qty. € 

70 100 0638.1 100 7,50 

100 150 0639.1 100 8,55 

120 170 0640.1 100 9,65 

Roth measuring vials 

For scintillation counter. 

➀ Model Vial 

Made of LDPE. With white screw caps, which are already closed 

after a quarter turn. 0.8 mm thick. 

Height incl. cap 60 mm. 

Outer-∅ 27 mm. Weight incl. cap 7.3 g+/-5 %. 

Capacity 20 ml. Quench 5 to 10 cpm. 

➁ Model Mini Vial A 

Made of PP. With white, projecting stopper for hanging into the 

20 ml- carrier vial. Volume 5 ml, height 5.5 cm, ∅ 14.5 mm. 

➂ Model Mini Vial B 

Made of PP. With white, non-projecting stopper for use 

without carrier vial. Volume 5 ml, height 5.5 cm, ∅ 14.5 mm. 

➃ Model Mini Vial C 

Made of LDPE. with white push-on cap, covering the vial from the outside, 

for putting into 20 ml carrier vial. Volume 5 ml, height 5.5 cm, ∅ 14.5 mm. 

Picture Model Art. No. Pack Qty. € 

➀ Vial 0794.1 1000 106,40 

➁ Mini Vial A 0049.1 2000 148,35 

➂ Mini Vial B 0299.1 2000 148,35 

➃ Mini Vial C 5404.1 2000 113,75 

8

TOP-OFFER 

Dispenser ceramus ® SPECIAL PRICES! 

• Media backflow system 

• Ceramic piston: high chemical stability 

• The dispenser on the bottle is freely rotatable 

• Quick and safe setting of volume 

• A45 thread (Supplied with 3 thread adapters A32/A38/S40) 

• Without dismantling, steam sterilizable at 121 °C / 2 bar 

• Individual certificate, with certificate of conformity acc. to DIN 12600 

Variable volume setting 

Volume 

(ml) 

Subdivisions 

(ml) 

Tolerance 

(ml/l) 


2 - 10 0,25 0,07 T303.1 1 213,95 

5 - 30 0,50 0,21 T304.1 1 268,75 

10 - 60 1,00 0,42 T305.1 1 290,25 

9

Centrifuges and accessories 


Microliter centrifuges Force-512 

• Max. capacity 12 or 18 centrifuge tubes 1.5/2.0 ml 

• Dislpay alternatively from min -1 or x g 

• Speed can be increased in 1000 x increments 


Speed max. 8500 min -1 

Min. speed 1000 min -1 

Max. RCF 

5200 x g 

Timer function 

to 15 min- 


191 x 178 x 127 mm 

Force-512 

Delivery incl. 12-place microliter rotor with spring catch lid. 


AC71.1 1 536,45 

Adapters for microlitre centrifuges Force-512 

Model Art. No. Pack Qty. € 

for centrifuge tubes 0,5 ml N890.1 6 46,05 



NEW 


FlipTube ® -centrifuge tubes 

Made of highly transparent PP. Volume 1.5 ml, graduated. Autoclavable. 

Special FlipTube ® Closure: Tubes are usable single-handed. 

Prevents contaminations and aerosols when opened. 

• Can be centrifuged up to 20 000 x g 

• Frosted labeling area on side and top 

• Lid membrane ∅ 8 mm, pierceable 

Colour Art. No. Pack Qty. € 

transparent LH82.1 500 13,45 

blue LH83.1 500 13,90 

yellow LH84.1 500 13,90 

green LH85.1 500 13,90 

red LH86.1 500 13,90 


Microliter centrifuge MIKRO 120 

• Max. capacity 24 x 1.5/2.0 ml centrifuge tubes 

• Delivery incl. 24-place angular rotor with lid 


Max. speed 14 000 min -1 adjustable in increments of 100 

Min. speed 500 min -1 

Max. RCF 

17 530 x g 

Operation time 

1 to 99 min, continuous run, short run 

Dimensions (H x W x D) 199 x 231 x 292 mm 


AA66.1 1 1200,80 

Accessories: 


Reducing sleeves for centrifuge tubes 0.2 ml AA67.1 6 11,85 

Reducing sleeves for centrifuge tubes 0.5 ml Y059.1 6 11,85 

Centrifuge tubes 2 ml 

Made of PP. Volume 2 ml, graduated. Autoclavable. 

• Centrifugable up to 20 000 x g at 20 °C, max. 20 min 

• With mat-finished labelling area on the side 

• The lid membrane, which is approx. 0.28 mm thick throughout, 

can be pierced by the analyzer 


colourless CK06.1 500 21,50 

10

Storage of light-sensitive samples 

Opaque centrifuge tubes 

Made of brown PP. Blue screw caps made of HDPE. For light-sensitive 

materials and reactions. Sterile. Conical bottom. Blue graduation and white 

labelling area. DNase/RNase- and human DNA-free, non-pyrogenic and 

non-cytotoxic. Temperature stable from -50 to +100 °C. 

Type Maximal centrifugability (x g) Dimensions 

Fixed angle rotor Oscillating rotor ∅ x H (mm) 

➀ + ➁ 15 ml vials 15000 3500 17 x 120 

➂ + ➃ 50 ml vials 7000 3200 30 x 115 


➀ KL46.1 100 in a bag 34,55 

➁ KL46.2 50 in a rack 20,35 

➂ KL47.1 20 in a bag 9,60 

➃ KL47.2 25 in a rack 12,80 

S 

Rotilabo ® -centrifuge tubes, black 

Made of PP, black. 1.5 ml, graduated. Autoclavable. 

Temperature stable from -80 to +121 °C. Can be centrifuged up to 

15000 x g. Ideal for storing light-sensitive samples. 


AA80.1 500 18,60 


Rotilabo ® -centrifuge tubes, brown, 

with screw thread 

Made of PP. Autoclavable. 

Liquid sample bags, black 

WhirlPak ® . Made of LDPE. Sterile. For saving and storing light-sensitive 

liquid and solid samples. With imprinted, white labelling area. 

Suitable for food. 

Dimensions: L 115 mm x W 230 mm, 64 µm thick. Volume 532 ml. 


HT83.2 100 19,30 

S 

• Volume 0.5, 1.5 and 2.0 ml 

• Brown centrifuge tubes for storage of light-sensitive samples 

• Temperature stable from -196 to 121 °C 

• Can be centrifuged up to 13 000 x g 

• Screw-on lid made of PP with silicone sealing 

• Only 1¼ turns needed for speedy opening and closing of lid 

• Lid inserts are also available for easy identification (see CK72.1 ff.) 

Please order lids separately! 

Centrifuge tubes without lid. 

Volume (ml) Design Art. No. Pack Qty. € 

0,5 self-standing CK47.1 1000 62,35 


1,5 conical CK49.1 1000 62,35 


2,0 conical CK51.1 1000 62,35 

Screw-on lids (PP) with silicone sealing 

Suitable for Rotilabo ® -centrifuge tubes, brown. 

Colour Design Art. No. Pack Qty. € 

red attached CK52.1 1000 95,70 

white attached CK53.1 1000 95,70 

red loose CK54.1 1000 84,95 

white loose CK55.1 1000 84,95 

Rotilabo ® -cryo storage boxes 

Made of black PP. Ideal for storing light-sensitive samples. With 100 holes, 

for centrifuge tubes 0.5 and 1.5/2 ml and for cryo vials. Max. tube height 

53.3 mm. Temperature stable from -90 to +121 °C. Stackable. 

Dimensions: L 140 x W 140 x H 60 mm. Autoclavable. 

Suitable for Rotilabo ® -stainless steel rack P959.1. 


N200.1 1 9,05 

11

Pasteur pipettes 

Pasteur pipettes 

Made of lime-soda clear glass. Hydrolytic class 3. Uniform. Wall thickness 

0.55-0.8 mm. With neck for cotton stoppers. Autoclavable. 

For one-time use in serological nd microbiological laboratories. 

Also suitable for filling and emptying NMR-vials. 

Without cotton stopper 

Total length Length of tip Tip outer-∅ Art. No. Pack Qty. € 

(mm) (mm) 

(mm) 

150 60 1,3 4518.1 1000 33,35 

230 140 1,3 4522.1 1000 34,40 

270 160 1,3 HX77.1 1000 91,40 

300 195 1,5 HX78.1 500 50,45 

350 230 1,5 HX79.1 1000 191,35 

Complete with cotton stopper 

Total length Length of tip Tip outer-∅ Art. No. Pack Qty. € 

(mm) (mm) 

(mm) 

150 60 1,3 E326.1 1000 68,20 

230 140 1,3 E327.1 1000 71,50 


S 

Standard pasteur pipettes, not graduated 

Made of transparent polyethylene (LDPE) precision-formed, unbreakable, 

non toxic and with controlled, reproducible drop size. Alternatively available 

with embossed graduation. 

Design Filling Drop Drops Length Art. No. Pack € 

volume (ml) size (μl) per ml (mm) 

Qty. 

unsterile, 7,3 50 20 300 E251.1 100 27,75 

very long 

unsterile, for 4,8 62 16 137 E305.1 250 19,30 

cell culture 

with wide 

opening 

sterile, single/ 4,8 62 16 137 EA54.1 250 39,65 

pack, for cell 

culture with 

wide opening 

unsterile 3,0 34 29 155 E306.1 500 29,55 

sterile, 3,0 34 29 155 EA55.1 500 42,65 

10 per pack. 

unsterile, 2,3 40 25 225 EA56.1 400 24,25 

very long 

unsterile, 

short 

0,9 40 25 87 EA57.1 500 21,55 

Pipette bulbs (teats) 

Made of silicone. Autoclavable. 

Capacity (ml) Length (mm) ∅ of openings (mm) Art. No. Pack Qty. € 

1 40 5 C529.1 10 8,55 

2 53 6 C530.1 5 6,95 

5 56 8 C531.1 5 13,40 

10 69 8 C532.1 5 21,45 

Suction piston graduated pipettes 

Made of AR ® -glass. With principal point ring division. 

With brown graduation. Graduated to tip. Zero point at the top. 

Volume (ml) Subdivisions (ml) Art. No. Pack Qty. € 

1 0,01 T742.1 1 13,55 

2 0,02 T743.1 1 13,75 

5 0,05 T744.1 1 15,65 

10 0,1 T745.1 1 17,85 

20 0,1 T746.1 1 22,00 

25 0,1 T747.1 1 22,85 

50 0,2 T748.1 1 44,30 

12

Sampling 

Sampling pump 

Ideal for obtaining liquid samples even from difficult to reach areas. Liquid 

only comes in contact with the PE-tube and the sample vessel. Also suitable 

for viscous samples (e.g. oils). The sample vessel is screwed into the pump 

and can be sealed thightly after taking the sample. Tube is easy to change 

and can be replaced quickly. 

Proceeding: a vacuum ist produced by pullin up the pump. 

The liquid is drawn off and collected in the PE-bottle. 


Connector 22 C001.1 1 63,45 

Connector 28 E514.1 1 59,35 

Accessories for sampling pump 


PE-bottle rectangular, 50 ml (connector 22) C002.1 10 15,35 

PE-bottle round, 250 ml (connector 22) C003.1 10 19,35 

PE-bottle round, 500 ml (connector 28) E515.1 10 21,90 

PE-bottle flat, 150 ml (connector 22) E517.1 10 21,40 

PE-bottle flat, 50 ml (connector 22) E516.1 10 17,65 

PE-tube ∅ inner 4.5 mm, ∅ outer 6 mm, length 15 m C004.1 1 15,50 

Sampling set 

Consists of sampling pump 22.5 bottles 50 ml each (rectangular), 2 bottles 

250 ml each, 15 m PE-hose and transporting case (Art. No. Y349.1). 

Art. No. Pack Qty. (Set) € 

C005.1 1 91,40 

Disposable sampling systems DispoSampler 

For liquids, bulk material and viscous media. 

• Disposable product - unpack, take sample, recycle 

• Made of environment-friendly, recyclebar HDPE 

• No contamination with other samples 

• No laborious, time-consuming and costly cleaning 

• Manufactured under clean-room conditions 

• Individually wrapped in foil 

Different models available: 

➀ LiquiDispo: For low-viscous liquids up to approx. 10.000 cP. 

Length (mm) Volume (ml) Art. No. Pack Qty. € 

500 100 HC50.1 10 70,00 

1000 190 HC51.1 10 85,95 

➁ ViscoDispo: For highly viscous media up to max. 100.000 cP. 


500 100 HC52.1 10 71,95 

1000 190 HC53.1 10 88,15 

➂ MicroDispo: For free-flowing solid material max. 0.5 mm grit size 


500 5 HC54.1 10 81,20 

500 10 HC55.1 10 81,20 

1000 5 HC56.1 10 96,45 

1000 10 HC57.1 10 96,45 

➃ ZoneDispo: For free-flowing solid material max. 2 mm grit size. 


500 100 HC58.1 10 206,10 

1000 190 HC59.1 10 270,90 


Rotilabo ® -powder sampler 

Made of chrome-plated brass. Can be sterilized. In compliance with FIL 

(Federation International de Laiterie) and IDF (International Dairy 

Federation) regulations. Is therefore approved for collecting food samples 

(e.g. powdered milk, flour). Also suitable for sampling sand, cement, etc. 

Total length 480 mm, plunger length 385 mm, outer ∅ 28 mm. 


L112.1 1 86,00 

Oxygen bottles acc. to Winkler 

Clear glass, with ground-in stopper NS 18.8 and matt label, exact content is 

engraved on bottle. Two digits after the comma, tolerance ±0.2 ml. 

Volume (ml) Art. No. Pack Qty. € 

100-150 HH78.1 1 17,95 

250-300 HH79.1 1 19,85 

13

Instruments 


Dissecting instruments 

Made of high grade steel, in case: 

1 Scalpel holder with 6 blades 

1 Dissecting needle with plastic handle 

1 Self-closing forceps 

1 Cover slip forceps 

1 Standard forceps 

1 Small scissors 

1 Standard scissors 

1 Double spatula 

1 Tube with dissection needles 


0829.1 1 32,15 

Knives 

For cutting foils, tubing, insulation, mats, etc. Blade is made of ice-hardened 

and hand-sharpened stainless steel. Knives are dishwasher proof. 

Blade length (mm) Total length (mm) Art. No. Pack Qty. € 

75 180 A572.1 1 24,75 

90 190 A573.1 1 26,75 

120 225 A574.1 1 28,95 

160 270 A575.1 1 29,05 

180 300 A576.1 1 41,85 

200 330 A577.1 1 46,05 

260 380 A579.1 1 50,55 

Rotilabo ® -tongs for crucibles 

Doubly bent. Made of 18/8-steel. Not magnetic. Electropolished. 

Autoclavable. 

Riveted 

Length (mm) Art. No. Pack Qty. € 

200 3214.1 1 7,30 

220 3221.1 1 7,35 

250 3228.1 1 7,45 

300 3231.1 1 7,90 

400 3232.1 1 17,00 

500 3236.1 1 18,60 

600 3237.1 1 18,05 

Screwed 

Length (mm) Art. No. Pack Qty. € 

200 3240.1 1 15,05 

220 3241.1 1 16,95 

300 3271.1 1 19,25 


Set of glass spoons 

Made of borosilicate glass. In 4 sizes, length from 210 to 230 mm. 

Packaging Art. No. Pack Qty. € 

pack of 4 x 2 = 8 0185.1 1 75,15 

Drigalski spatulas 

Ideal for even distribution of bacterial substances on solid nutrient media. 

Also suitable as stirrer. Autoclavable. 

Material Length (mm) Width (mm) Art. No. Pack Qty. € 

Stainless steel 165 30 K732.1 1 3,50 

Stainless steel 165 40 AL98.1 1 3,95 

Glass 145 50 T724.1 1 2,85 

14

TOP-OFFER 

Rotilabo ® -microlitre pipettors 

Proline ® , variable 


Easy - robust - reliable 

✔ Ergonomically designed 

✔ With separate tip ejection 

✔ With Certificate of Conformity in accordance 

with DIN EN ISO 8655 with Test Protocol 

Rotilabo ® -microlitre pipettors Proline ® , variable 

• Ergonomically designed handle enables one-hand operation 

• Comfortable finger rest 

• Low-weight for fatigue-free operation 

• Easy-to-read display 

• High-quality materials 

• With calibrating tools for easy self-calibration 

*Two pipettors in one. For 10 µl and 200 µl tips. Supplied with 10 µl cone. If 200 µl tips are to 

be used, simply change the tip ejector sleeve, which is supplied with order. 

Volume (μl) Graduation (μl) Tip type (μl) Art. No. Pack Qty. € 

0,1-2,5 0,05 10 P865.1 1 139,75 

0,5-10 * 0,1 10, 200 L312.1 1 129,00 

5-50 0,5 200 E223.1 1 102,15 

10-100 1 200 N468.1 1 102,15 

20-200 1 200 E224.1 1 102,15 

100-1000 5 1000 P852.1 1 102,15 

1000-5000 50 5000 E226.1 1 102,15 

Table-pipettor stands 

Made of polyamide. Ideal for 7 standard microlitre pipettors. Space-saving. 


light grey T277.1 1 58,60 

ice-blue T278.1 1 58,60 

mint green T279.1 1 58,60 

vanilla-yellow T280.1 1 58,60 

15

Cleaning and Care 


Cleansing wipes 

Can be used wet or dry. Hard-wearing and highly absorbent. 

Washable to max. 60 °C. Dimensions: L 37 x W 40 cm. 


EE57.1 2 packs with 2 wipes 6,40 

Ultrasonol ® 7 - neutral 

• Liquid concentrate pH 7 

• Ideal for cleaning objects made of all types of solid materials 

• Very gentle on material 

Use 2-10 % in water: 

Reaction time max.10 min. Heating up to +80 °C. 

After washing, rinse thoroughly and dry. 


5356.1 1 l 8,55 

5356.2 5 l 33,30 

5356.3 30 kg 173,05 

Rotilabo ® -dish washing brushes 

Triangular. With plastic handle made of PP and bristles made of nylon 6.6. 

Suitable for. cleaning corners and edges that are difficult to reach. Total 

length 235 mm, length of handle 175 mm, length of brush head 65 mm. 


A839.1 5 12,85 

Sekuroka ® -safety lab sink mat 

Made of soft PVC to prevent glass breakage when washing. Round profile 

prevents splashing of running water. The smooth surface prevents dirt from 

settling. Weight of mat is sufficient to insure secure position in flowing water. 

An additional advantage: Magnetic followers do not slip through mesh 

easily into drain pipe. Dimensions L 750 x W 450 x H 15 mm. 

Width of profile 8 mm. Width of web 40 mm. 


C374.1 1 64,40 

Rotilabo ® -washing system for pipettes 

Manufactured from HDPE. Washing system for gentle cleaning of pipettes 

based on pipetting principle. A complete system consists of a washing unit 

and/or cleaning vessel and a pipette basket. Delivery includes no tube. 

All individual components must be ordered separately. 

• Washing unit with draining siphon for automatic water change. Suitable 

for use with pipette baskets. 

• Cleaning vessel for pre-washing pipettes or brushes with cleaning 

solution. 

• Pipette baskets for immersing pipettes in the cleaning vessels or 

washing units and for transporting the pipettes. Height of basket 300 mm. 

Optional extension piece is also available which enables the basket 

(Art. No. Y813.1) length to be extented from 650 to 870 mm. 

Washing unit 

For pipette length (mm) ∅ x H (mm) Art. No. Pack Qty. € 

600 170 x 990 Y809.1 1 152,40 

460 170 x 735 Y810.1 1 145,65 

Cleaning vessel 


600 162 x 650 Y811.1 1 64,80 

460 162 x 505 Y812.1 1 63,40 

Pipette basket 


600 145 x 650 Y813.1 1 31,25 

460 145 x 500 Y814.1 1 31,65 

Accessories: 

Extension piece for pipette basket Y813.1 Y815.1 2 10,25 

16

Lubricants 

Ballistol ® -oil and -spray 

Mildly alkaline special oil with cleaning, conserving, protective, 

regenerating, impregnating, lubricating and disinfecting properties. Its low 

surface tension enables it to flow into the finest of all tears and cracks. 

Forms a protective film on metal surfaces. Does not gum or cure. Free from 

chlorinated hydrocarbons, environmentally friendly and biologically 

degradable. Also suitable for wood and leather. 

Identification for the oil: S: 7-16 

Identification for the spray: è+ R: 2-7-16 


AA74.1 Bottle 50 ml 4,20 

AA74.2 Bottle 500 ml 14,10 

AA75.1 Spray can 200 ml 8,50 

BASF-clear lubricant 

Water-soluble. Ideal for all glass ground joints. Vacuum-tight and 

removable by washing with water. Virtually no change in consistency 

between -30 and +200 °C. Does not resinify. Is compatible to most 

elastomeres and is easily decomposable. 


E691.1 80 g tube 19,15 

Vaseline 

White, acc. to DAB 10. Protects reliably against skin damaging irritants. 

Prevents dry and chapped skin. Almost neutral in odour. 

Packaging Art. No. Pack Qty. € 

Tube 100 g E746.1 1 3,45 

Silicone pastes BAYER 

Ideal for ground joint connections, for sealing, lubricating and protecting 

sensitive parts in the laboratory and production. Also excellent as moisture 

repellent and sealing agent for electric appliances, e.g. immersion heaters; 

as lubricant for refrigerators and freezers to prevent the rubber sealing from 

caking; as separating agent and to treat surfaces of plastic products. 

Temperature stable from -50 to +200 °C. 

Model Art. No. Pack Qty € 

Low viscosity 0855.1 tube à 35 g 4,25 

Medium viscosity 0856.1 tube à 35 g 4,25 

High viscosity 0857.1 tube à 35 g 4,25 

Silicone pastes BAYER assortment 

Assortment of 2 x each tube low viscosity, medium viscosity and high 

viscosity. 


0858.1 6 tubes (= 6 x 35 g) 24,20 

Sprayflon ® 

Lipid free multi-purpose lubricant, gliding and separating agent with 

extremely low friction factor. Resists water, oil and most aggressive 

substances. Anti-adhesive, dirt repellent, prevents freezing and is 

temperature stable to +260 °C. CFC/CC free. Propellant propane/butane. 

Identification: è+ R: 12-18 · S: 9-16 


K007.1 Spray can 300 ml 11,80 

17

Storage and transport 


Rotilabo ® -drawer tray 

Made of PVC, with 12 storage compartments 87 x 87 mm (inside) for small 

parts. Outer dimensions L 410 x W 300 x H 65 mm. 


8110.1 1 32,15 

Lab-wire trolley 

Made of steel tubing and sheet steel. Two baskets, 65 and 24 l volume, 

corrosion protected and covered with soft plastic. 

Dimensions: W 410 x L 730 x H 850 mm (total height 970 mm), 

weight 13.5 kg. Wheels, ∅ 100 mm, can rotate in all directions. 

Loading capacity per basket 30 kg. 


1927.1 1 364,45 

Security separating grating 

For hanging into trolley. Made of plastic covered metal. Ideal for subdividing 

lab trolley basket. Suitable for safe transport of small containers and glass 

flasks. Dimensions: W 370 x H 240 mm. 


B001.2 1 40,85 

Liquid sample bags 

Whirl-Pak ® . Sterile. 

Ideal for storing liquid and solid samples. Suitable for foodstuffs. 

Procedure: 

1. Whirl Paks ® can be opened easily by simply tearing the foil along the 

perforation. The bag interior is therefore protected against contamination, 

as long as the bag is not used. 

2. Practical pull-open loops enable easy opening of bag, 

without contact to the interior. The bag remains open when filling. 

3. The wide-neck opening of the bag makes filling easier. 

Hold the bag as indicated and fill approx. 2/3 full. 

4. The bags are closed by pulling on the outer loops. 

5. Hold the bag at a distance and swirl it at least 3 times. 

6. The bags are sealed tightly by bending the loops. 

With labelling space 

Volume Filling volume Width x Height Art. No. Pack Qty. € 

(ml) (ml) 

(mm) 

30 20 65 x 125 E252.2 500 65,60 

60 40 75 x 125 E253.2 500 66,65 

120 80 75 x 185 1611.2 500 74,75 

540 360 115 x 230 1612.2 500 102,15 

Without labelling space 

Volume Filling volume Width x Height Art. No. Pack Qty. € 

(ml) (ml) 

(mm) 

120 80 75 x 185 T252.2 500 63,45 

540 360 115 x 230 T253.2 500 96,25 

720 480 150 x 230 T254.2 500 123,65 

1080 720 125 x 380 T255.2 500 134,40 

2070 1380 190 x 380 T256.2 500 181,70 

S 


Rotilabo ® -storage boxes 

Made of PP. Blue. Resistant against oil and acids. Breakproof, stackable. 

L x W x H (mm) Art. No. Pack Qty. € 

115 x 100 x 75 Y388.1 6 3,20 

165 x 100 x 75 Y389.1 4 3,45 

240 x 145 x 125 Y390.1 2 3,80 

335 x 205 x 155 Y391.1 2 7,00 

495 x 315 x 185 Y392.1 2 13,45 

18

pH measuring technology 


NEW 


Laboratory-pH-meter HI 208 

with integrated magnetic stirrer 

Easy-to-use All-in-One pH-meter for vocational training. 

• Simultaneous display of pH-value and temperature 

• HOLD-function for freezing a measured value in the display 

• Automatic 1-/2-point calibration with 2 stored buffer series 

(pH 4.01 - 7.01 - 10.01 or pH 4.01 - 6.86 - 9.18) 

• Automatic temperature compensation 

• Features integrated magnetic stirrer with fixed rotation speed of 500 min -1 

• With 12 VDC adapter or battery-operated for on-site training 

Scope of delivery: Comes complete with pH-plastic electrode HI 1291 D 

with integrated temperature probe, plastic beaker 50 ml, buffer solutions pH 

4.01 and 7.01 (20 ml each), electrode holder, magnetic follower (∅ 5mm, 

L 12 mm) and power unit. Comes without battery (please order separately 

if required) 


Measuring range/resolution pH -2.00 to 16.00 

°C -5.0 to +80 °C 

Accuracy pH 0,01 

°C ±0.5 (to 60 °C) ±1 (restmeasuring range) 

Dimensions (L x W x H) 

192 x 104 x 134 mm 


KX67.1 1 245,00 

Accessories for laboratory-pH-meter HI 208 


Battery E-Block 9 V 1025.1 1 4,65 


Combi testers pH, conductivity, °C - Model Combo 

Two models for different measuring ranges. Complete with 

4 cell batteries 1.5 V. 

Properties 

• Simultaneous display of pH or EC measured values and temperature. 

• Simple calibrating with pre-programmed pH and conductivity solutions 

• Automatic temperature compensation of pH and EC/TDS-value 

• Adjustable temperature coefficient enables applicaton in alkaline and 

acid media 

• Conductivity probe made of graphite 

• Low battery display, stability indicator 

• Exchangeable pH electrode 

• Dimensions: L 163 x W 40 x D 26 mm. Weight 85 g. 


Model Combo I Combo II 

Measuring range / pH 0.00 to 14.00 0.00 to 14.00 

Resolution EC 0 to 1999 μS/cm 0.00 to 19.99 μS/cm 

TDS 0 to 2000 ppm (mg/l) 0.00 to 1000 ppt (g/l) 

°C 0.0 to 60.0 0.0 to 60.0 

Accuracy pH ±0.05 

EC/TDS 

±2 % of rating 

°C ±0.5 


Combo I X631.1 1 99,95 

Combo II X632.1 1 99,95 

pH-buffer solutions 

For pH-meter. In bottles 500 ml and 1000 ml. Accuracy ±0,01 pH. 

500 ml 

without certificate 

1000 ml 

without certificate 

500 ml 

with manufacturer's 

certificate 

pH-value Art. No. € Art. No. € Art. No. € 

4,01 9602.1 8,45 H906.1 10,50 AK52.1 12,55 

6,86 9603.1 8,45 H907.1 10,50 AK53.1 12,55 

7,01 9604.1 8,45 H908.1 10,50 AK54.1 12,55 

9,18 9605.1 8,45 H909.1 10,50 AK55.1 12,55 

10,01 9606.1 8,45 H910.1 10,50 AK56.1 12,55 

Conductivity test solutions 

For conductivity meters. 

500-ml-bottles 


84 μS/cm C524.1 1 10,25 

1413 μS/cm E469.1 1 10,25 

5000 μS/cm E470.1 1 16,00 

12880 μS/cm E471.1 1 10,25 

19

Weighing technology 


NEW 


Electronic hanging balances HDB-series 

With Data-Hold function for "freezing" the weight reading for 5 s. Hook made 

of stainless steel, folding. AUTO-OFF function after 5 min without any load 

change. Dimensions (W x D x H): 70 x 25 x 105 mm (with hook 195 mm). 

Weight approx. 150 g. Delivery incl. 2 batteries Micro 1.5 V. 

Model Weighing range (kg) Readability (g) Art. No. Pack Qty. € 

HDB 5K5 5 5 HK43.1 1 33,00 

HDB 10K10 10 10 HK44.1 1 33,00 


Analysis balances ABS and ABJ series 

Application: 

• Piece counting and percentage weighing 

• With maximum capacity display - gradient light strip indicates weighing 

range still available 

Equipment options 

• ABS-Models with external adjustment 

• ABJ-Models with internal adjustment 

• Adjustment level 

• RS 232 data interface 

• Dimensions of balances including wind guard: 

W 225 x D 315 x H 330 mm 

• Dimensions of weighing area: W 190 x D 155 x H 225 mm 

Platform balances DE-series 

With stainless steel weighing pan. Large LCD display with 25 mm digits. The 

display unit is assembled to the platform on delivery. It can be positioned 

separately after loosening two screws. Cable length approx. 1.5 m. 

Programs: recipes, procentual weighing, piece counting. 

With data interface RS 232. Can be operated with mains adapter 230 V 

or batteries. Automatic switch-off after 3 min to prolong battery life. 

Dimensions: balance W 310 x D 440 x H 60 mm. 

Weighing pan 310 x 310 mm. 

Delivery incl. wall mounting, working protection cover and power supply. 

Please order batteries separately. 

Also available: battery recharging set (serviceable life 16 h) 

and stand for display unit. 

Model Weighing range (kg) Readability (g) Art. No. Pack Qty. € 

DE 3 K 1N 3 1 Y532.1 1 129,00 

DE 6 K 2N 6 2 P927.1 1 129,00 

DE 15 K 5N 15 5 P928.1 1 129,00 

DE 36 K 10N 36 10 P929.1 1 129,00 

DE 60 K 20N 60 20 P930.1 1 129,00 

DE 150 K 50N 150 50 P931.1 1 129,00 

Accessories: 

Stand P933.1 1 35,00 

Battery E-Block 9 V 1025.1 1 battery 4,65 


Models 

Weighing Readability Reproducibility/ Platform 

range (g) (g) Linearity (±g) (mm) 

ABS 80-4 / ABJ 80-4M 83 0.0001 0.0001 / 0.0002 ∅ 80 

ABS 120-4 / ABJ 120-4M 120 0.0001 0.0001 / 0.0002 ∅ 80 

ABS 220-4 / ABJ 220-4M 220 0.0001 0.0001 / 0.0002 ∅ 80 

ABJ 320-4 320 0.0001 0.0001 / 0.0002 ∅ 80 

ABS-Series with external adjustment 

Model Weighing range (g) Art. No. Pack Qty. € 

ABS 80-4 83 KT85.1 1 730,00 

ABS 120-4 120 KT86.1 1 780,00 

ABS 220-4 220 KT87.1 1 860,00 

ABJ-Series with internal adjustment, not calibratable 


ABJ 80-4M 83 KT88.1 1 830,00 

ABJ 120-4M 120 KT89.1 1 880,00 

ABJ 220-4M 220 KT90.1 1 960,00 

ABJ 320-4 320 KT91.1 1 1190,00 

ABJ-Series with internal adjustment, calibrated ex works 


ABJ 80-4M 83 KT92.1 1 930,00 

ABJ 120-4M 120 KT93.1 1 980,00 

ABJ 220-4M 220 KT94.1 1 1060,00 

20

Measuring technology 


NEW 


Radio-controlled thermometer Ratio 

Wireless transmission of outside temperature from up to 3 different 

transmitters. Range max. 100 m. Indication of inside temperature. Max/Minmemory. 

Also with radio-controlled clock. For hanging or upright use. 

Comes without batteries. Two Mignon 1.5 V batteries required for receiver 

and 2 Micro 1.5 V batteries for the transmitter. Please order separately. 


Measuring range/Resolution 

Dimensions (L x W x H) 

inside 

outside 

Receiver 

Transmitter 

0 to +60.0 °C 

-40.0 to +65.0 °C 

113 x 67 x 28 mm 

86 x 32 x 15 mm 


Radio-controlled thermometer LP27.1 1 15,00 

Additional transmitter LP28.1 1 9,70 

Accessories: 

Battery Mignon/AA 1.5 V 1022.2 4 batteries 5,60 

Battery Micro/AAA 1.5 V 1021.2 4 batteries 5,60 

Compact thermometer Mini-K 

For simple temperature measurement. 

For connection with thermocouple probe, Type K. 

• Waterproof enclosure (IP 65) 

• Automatic switch-off after 15 min to prolong battery life 

• Hold display 

• With magnet for attachment to metal surfaces. 


Range -64.0 to +1370.0 °C 

Accuracy 

±1 % or 1 °C (larger value is valid) 

Resolution 0.1 °C 

Dimensions (L x W x D) 43 x 20 x 78 mm 

Weight 

41 g 

Delivery incl. Cell battery CR 2032, 3 V. 

Supplied without probe (please order separately). 


KL30.1 1 41,95 

Temperature probes, Type K for Mini-K 

Cord length 1.0 m. 

NEW 


Stopwatch with calibration certificate 

Water-protected ABS-housing. Max. runtime 9 h 59 min 59 s. 

1/100 seconds display. Recording of interval time. 

Dimensions: L 82 x W 61 x D 28 mm. 

Delivery incl. Mignon 1.5 V battery and calibration certificate. 


LK76.1 1 61,20 

Immersion-/penetration probes 

With centred tip. Measuring range -40 to +400 °C. 

Length (mm) ∅ (mm ) Art. No. Pack Qty. € 

120 3 KL31.1 1 26,70 

Immersion-/penetration probes 

With centred tip. Measuring range -60 to +550 °C. 


130 1,5 KL32.1 1 40,85 

Immersion probe 

Ideal for measuring in liquid, gaseous and powdery media. 

Measuring range -100 to +1100 °C 


300 1.5 KL33.1 1 59,15 

Immersion probes without handle. 

Bendable. Measuring range -200 to +900 °C. Without handle and 

connecting lead. Please order separately if required. 


220 3 KL34.1 1 24,75 

PTFE-insulated thermo wire without handle 

Bendable. Measuring range -65 to +260 °C. Without handle and connecting 

lead. Please order separately if required. 


1000 1 KL35.1 1 20,45 

Accessories: 

Handle with connecting lead, cable length 1 m, 

suitable for all K-Type-probes 

T248.1 1 33,00 

21

Calibrated thermometers 


Lab thermometers, calibrated with certificate 

Prismatic capillary tube, uncoated. ∅ 8.0 bis 9.0 mm. 

Enclosed-scale thermometer. 

Hg-filling. Acc. to DIN 12775 or DIN 12778. 

Measuring Range (°C) Graduation (°C) Length (mm) Art. No. Pack Qty. € 

0 to 50 0,5 220 K786.1 1 93,20 

0 to 50 0,1 420 K787.1 1 145,15 

0 to 100 0,5 270 K788.1 1 92,15 

0 to 100 0,2 420 K789.1 1 148,35 

0 to 200 0,5 400 K780.1 1 155,90 

0 to 250 1 350 K782.1 1 116,10 

0 to 250 0,5 420 K783.1 1 173,10 

0 to 360 1 380 K784.1 1 137,60 

With Hg-filling 


-10 bis +50 0,1 400 KT44.1 1 213,95 

-20 bis +50 0,1 450 KT45.1 1 235,45 

-10 bis +100 0,5 300 KT46.1 1 141,90 

-10 bis +200 0,5 380 KT47.1 1 192,45 

-10 to +200 1 300 K781.1 1 120,40 

-10 bis +250 1 320 KT48.1 1 199,95 

-10 bis +300 1 320 KT49.1 1 203,20 

-10 bis +410 1 380 KT50.1 1 212,85 

With special filling, red. Of mineral basis (eco-friendly). 


-10 bis +50 0,5 220 KT51.1 1 135,45 

-10 bis +100 0,5 270 KT52.1 1 145,15 

-10 bis +100 1 305 KT53.1 1 137,60 

-10 bis +150 1 305 KT54.1 1 168,80 

-10 bis +200 1 350 KT55.1 1 173,10 


Calibrated glass thermometer 

Comes in oval, plastic housing. Complete with calibration stamp, 

10 years validity. Range -30 to +30 °C. Graduation 1 °C. With permanent, 

burnt-in print. Display column optically magnified. Excess temperature-safe 

(can be extended to +60 °C). Length 220 mm, ∅ 20 mm. 


H719.1 1 53,70 

Calibrated precision thermometer testo 112 

Application range: 

• Suitable for certified measuring by public authorities, institutions and for 

expert reports. 

• For measuring product temperature in the food industry 

• For routine operations in everyday work 

• For check measurements during refrigerated transports 

Properties: 

• PTB-type testing 

• Integrated self-check 

• Acoustic alarm goes off immediately when limit values have been 

exceeded or under-run 

• Display light 

• Min/Max-values 

• Certificate of calibration with 4 calibration points 


Measuring range -50.0 to +300.0 ° C 

Accuracy 

±0.2 °C (-50 to +200 °C) 

±0.3 °C (rest. range) 

Dimensions (H x L x W) 64 x 40 x 182 mm 

Indoor-/outdoor thermometer, officially calibrated 

With display light and Min/Max-value control. Simultaneous display of 

inside and outside temperatures. Outdoor sensor with approx. 3 m cord. 

Suitable for desktop or wall assembly. 

Delivery incl. official calibration certificate with test point at +4 °C and 

battery Micro 1.5 V. 


Measuring range inside: 0 to +40 °C 

outside: -50 to +70 °C 

Accuracy ±1 °C 

Dimensions (H x L x W) 

55 x 20 x 80 mm 


EH47.1 1 96,25 

Delivery includes: Thermometer testo 112 incl. Pt 100 Immersion-/ 

Penetration probe (L 115 mm, ∅ 5 mm) with attached cable (cable length 

approx. 1.2 m), Certificate of Calibration and E-Block battery 9 V. 


EH93.1 1 465,00 

Accessories for thermometer testo 112 

Safety cover TopSafe, protects from blows and dust 


EH94.1 1 24,00 

Transport case for thermometer and probe 


EH75.1 1 32,00 

22

TOP-OFFER 

Precision thermometers 

Checktemp series 

Ideal for daily temperature checking in the laboratory and in industry 

High measuring accuracy of ±0.3 °C in measuring range from -20 to +90 °C 

➀ Checktemp basic 

With integral stainless steel penetration probe 

(L 105 mm, ∅ 3 mm) 

Dimensions: W 66 x H 50 x L 25 mm. Weight 50 g. 

Delivery incl. cell-battery 1.5 V. 

➁ Checktemp 1 

Pocket-thermometer with stainless steel penetration 

probe (L 160 mm, ∅ 3 mm) and 1 m cable. 

Dimensions: W 106 x H 58 x L 19 mm. Weight 80 g. 

Delivery incl. micro 1.5 V battery. 


Measuring range from -50.0 to +150.0 °C 

Resolution 0.1 °C 

Accuracy 

±0.3 °C (-20 to +90 °C) 

±0.5 °C (outside) 



Checktemp basic G001.1 1 24,95 

Checktemp 1 G002.1 1 26,95 

23

Gel documentation 

NEW 


Accessories for gel documentations systems 

➂ Transilluminators 

• Homogenous illumination 

• Temperature-controlled ventilation (except K-model) 

• Filter lid made of stainless steel 

• Dimensions W 32.5 x D 32.2 x H 10.5 cm 

• Filter size 20 x 20 cm 

Please order UV-protection and blue light filter shield separately. 

Model Wave length Tubes Intensity Art. No. Pack € 

(nm) 

Qty. 

UST-20M-8K 312 6 x 8 W - LL55.1 1 682,65 

UST-20M-8E 312 8 x 8 W 50-100 % LL56.1 1 962,15 

UST-20M-8R 312 8 x 8 W 10-100 % LL57.1 1 1134,15 

USDT-20SM-8K 254/312 2 x (4 x 8) W - LL58.1 1 938,50 

USDT-20SM-8R 254/312 2 x (4 x 8) W 10-100 % LL59.1 1 1284,65 

USDT-20ML-8K 312/365 2 x (4 x 8) W - LL60.1 1 938,50 

USDT-20ML-8R 312/365 2 x (4 x 8) W 10-100 % LL61.1 1 1284,65 

BST-20G-D2R 470 LED-Matrix 

224 

10-100 % LL62.1 1 1138,45 

Gel documentation systems 

PC-independent imaging systems e.g. for acquisition of DNA/RNA bands in 

agarose gels or protein bands in polyacrylamide gels. 

CCD-Camera Model B8-437G 

• Resolution 752 x 582 pixel 

• Manual zoom objective 8 - 48 mm 

• Camera control via external operation terminal 5.6″ LCD display, keypad 

and USB-connection 

• Functions: Live image mode for comfortable positioning of gels, setting of 

exposure time (manual or automatic), image inverting, recognition of 

image manipulation (GLP), record of image settings, data storage onto 

USB-stick 

➀ Typ Gerix 1010 

Attachable dark hood for use in combination with a transilluminator 

with UV-protection shield. 

➁ Typ Gerix 1020 

Stationary dark hood with white top light and sliding door. Integrated UV 

protective shield can be pushed up for gel positioning. Attachable to 

transilluminator with 4 clamps. Transilluminator automatically switched off 

in case of overheating. 

Delivery incl. dark hood, CCD-camera and operation terminal. Please 

order transilluminator, thermal printer and evaluation software separately. 

Model Dimensions W x D x H (cm) Art. No. Pack Qty. € 

➀ Gerix 1010 30 x 25 x 59 LL53.1 1 4025,88 

➁ Gerix 1020 32,5 x 32 x 67 LL54.1 1 4708,50 

UV-tubes 

• 8 watt 

• Dimensions: L 300 x ∅ 12 mm 

Wave length (nm) Art. No. Pack Qty. € 

254 LL70.1 1 13,95 

312 LL71.1 1 20,80 

365 LL72.1 1 13,40 

Conversion screen for transilluminators 

• For converting UV-radiation into visible light 

• Colour value white-yellow 

• Light emission: 390 to 650 nm 

• Dimensions: W 24 x D 22 cm 


LL63.1 1 150,00 

Protection/filter shields for transilluminators 

• Dimensions: W 32.5 x D 32.2 x H 2.5 cm 

• 4 sides blocking edges 


UV-protection shield LL64.1 1 56,45 

Filter shield for blue light LL65.1 1 64,00 

➃ Analysis software Gelix One ® 210, single license 

• Imports bmp, png, tif, jpg images 

• Reduces background noise 

• Manual band detection and processing 

• Molecular weight determination 

• Manual standard allocation 

• Exports data table 

• Reporting and printing function 

• For operating systems: Win ME, 2000, XP, Vista 


LL67.1 1 317,15 

Thermal printer Mitsubishi P93E 

• Thermosensitive print technology, 256 shades of grey 

• Resolution 325 dpi 

• Printing speed approx. 3 s/printout 

• Standard paper: 

Thermal paper roll K61B, width 110 mm, approx. length 21 m 

• High density paper: 

Thermal paper roll K65HM, width 110 mm, approx. length 21 m 


Printer LL68.1 1 904,65 

Paper K61B LL69.1 4 30,10 

Paper K65HM LL66.1 4 68,80 

24

Hot plates 


Hotplates 

With variably adjustable temperature setting. Control lamp. 

Lower part with high heat-resistance coating. 

Two models available: 

• Upper part enamelled white 

• Upper part brushed stainless steel 


Type Hotplates, single Twin hotplate 

Output 1500 W 1500 W / 1000 W 

∅ Heating ring 185 mm 185 / 150 mm 

Dimensions (H x L x W) 262 x 280 x 88 mm 460 x 272 x 88 mm 

Model Design Art. No. Pack Qty. € 

Hotplates, single Upper part enamelled white P853.1 1 38,60 

Hotplates, single Upper part brushed stainless steel EC13.1 1 45,70 

Twin hotplate Upper part enamelled white K705.1 1 53,25 

Twin hotplate Upper part brushed stainless steel EC14.1 1 64,30 

Glass ceramic hotplate CT 2203/TC 

• Housing made of brushed stainless steel 

• Dual circuit heating technology 

• Large heating zone can be switched on (∅ 210 mm) 

• Schott Ceran ® cooking surface 

• With 9-stage heating power 


Heating power 

Max hotplate temperature 230 °C 

1000 W (∅ 140 mm) 

2200 W (∅ 210 mm) 

Heated zone 

∅ 80 or ∅ 210 mm 


305 x 410 x 75 mm 


EY75.1 1 160,20 


Acid-resistant hotplate CP 300 

Ideal for aggressive liquids, concentrated acids or alkaline solutions, 

for trace analysis etc. 

Design: 

• Hotplate enclosure made of PTFE with ceramic hotplate surface 

• Safety warning lamp for temperatures over +50 °C 

• Remote controllable via separate control unit with PTFE-coated 

connection lead (control unit can be positioned outside working area) 


Heating power 

900 W 

Hotplate material 

Ceramic 

Housing material 

PTFE 

Max. hotplate temp. 400 °C 

Heated area 

200 x 200 mm 

Surface hotplate (W x D) 

300 x 300 mm 


320 x 360 x 60 mm 

Control line: Length 

2 m 


KN92.1 1 2064,00 

Digital hotplate SD 160 

Hotplate with high temperature stability. 

• Digital display with simultaneous desired/actual temperature readings 

• Aluminium hotplate enables even heat distribution 


Heater capacity 

700 W 

Max. hotplate temp. 325 °C 

Display resolution 1 °C 

Temperature fluctuation in working plate area ±0.2 °C at 37 °C 

±1.0 °C at 150 °C 

Temperature stability ±0.25 °C 

Surface hotplate (W x D) 

160 x 160 mm 


190 x 300 x 110 mm 


AH85.1 1 499,00 

25

Safety gloves 

Chloroprene-disposable gloves 

Semperguard ® CRX 

EN 420, EN 374-2, -3, AQL 1.5. Disposable gloves made of chloroprene. 

Suitable for the laboratory and pharmaceutical sector. 

• Powder-free n 

• Colour blue 

• Extra long: 300 mm, for better hold and more protection of lower arm 

• Similar comfortable fit as with natural latex, however gloves are free from 

natural latex proteins 

• Good splash protection against acids, alkaline solutions and alcohols 

• Inner coating makes gloves easy to pull on 

• Textured surface for safe grip, even in wet areas 

• Thickness: approx. 0.13 mm 

• 50 gloves per dispenser box 

Size Art. No. Pack Qty. € 

S CH48.1 50 13,45 

M CH49.1 50 13,45 

L CH50.1 50 13,45 

XL CH51.1 50 13,45 

Sekuroka ® -finely-knit gloves 

Coated, acc. to EN 420 and EN 388. Made of nylon, white. Protect against 

cuts and pricks. With polyurethane coating on the palm of the hand. 

Elasticated knitted welt. Seamless. Is silicone-free. Washable max. 30 °C. 

Size Art. No. Pack Qty. (Pair) € 

S X797.1 5 10,55 

M X798.1 5 10,55 

L X799.1 5 10,55 

XL EH70.1 5 10,55 

XXL EH71.1 5 10,55 



Sekuroka ® -butyl-gloves 

Acc. to EN 420, 388, 374-2/-3. Thin chemical protection glove with rough 

surface in hand area to increase grip of smooth and wet parts. Good finger 

mobility and sens of touch. Long roll-up cuff. Unlined. Length 355 mm, 

0.35 mm thick. 

Size Art. No. Pack Qty. (Pair) € 

7 CE42.1 1 16,10 

8 CE43.1 1 16,10 

9 CE44.1 1 16,10 

10 CE45.1 1 16,10 

11 CE46.1 1 16,10 

Sekuroka ® -heat protection gloves 

Acc. to EN 420, EN 388 and EN 702. Made of polyamide fibers Nomex ® by 

DuPont. Long product life, good form stability, very comfortable fit, highly 

flame and chemical resistant. The finely-knitted jersey quality gloves are 

suitable for precision work. Washable at max. +95 °C. 

Protect against exposure to max contact heat of: 

• 100 °C, for max. 26 sec 

• 250 °C, for max. 7.6 sec 

Size Length (mm) Art. No. Pack Qty. (Pair) € 

7½ 260 0138.1 1 18,65 

8 260 0141.1 1 18,65 

8½ 260 0143.1 1 18,65 

7½ 350 0145.1 1 25,60 

8 350 0147.1 1 25,60 

8½ 350 0148.1 1 25,60 

26

TOP-OFFER 

ROTH Cyclo II 

Tube can be changed easily: 


Pericyclic pumps Roth Cyclo II 

Pumps for all applications in the laboratory, in chemical analysis, 

biotechnology and medicine. 

• 1- or 2-channel head pumps (∅ 62 mm) 

• 3- or 6-roll pump head can be selected, for lower pulsation 

• Simple operation via two knobs: 

Infinitely variable speed setting from 0 to 100 % 

adjustable left-hand/right-hand motion 

• Tube can be changed easily in a few seconds 

• Variable tube pressure 

• With easy to disassemble pump head for problem-free cleaning 

• Pump head can be turned by 90° 

• Matching tube cassettes for 3 different tube sizes 

• Temperature and current limiter for maximum reliability 

• Stackable 

• Tube with 1.6 mm wall thickness can be used 

Scope of delivery of standard model: 

Cyclo II with selected pump head, incl. tube cassette for tube with inner 

∅ 4.8 mm and wall thickness 1.6 mm. 


Cyclo II with 1-channel pump head, 3 rolls Y374.1 1 774,00 

Cyclo II with 1-channel pump head, 6 rolls EP74.1 1 843,90 



Accessories: 

Tube cassette for tube inner-∅ 1.6 mm Y375.1 1 69,45 

Tube cassette for tube inner-∅ 3.2 mm Y376.1 1 69,45 


Safe delivery pressure 

Voltage 

Drive / Power 

Weight 


1 bar 

230 VAC 

DC-motor / 10 W 

1.7 kg 

134 x 190 x 131 mm 

Tube ID (mm) / 

Tube cassette 

1.6 / 

1.6 (Y375.1) 

3.2 / 

3.2 (Y376.1) 

4.8 / 

4.8 (incl. in delivery) 

3-roll head: 

Pumping capacity (ml/min) 1.5-30 6-110 12-240 

6-roll head: 

Pumping capacity (ml/min) 1.2-24 4.4-88 9.6-192 

27

Protective clothing 

Sekuroka ® -ladies' work coats 

With lapel and concealed buttons, buttons are permanently sewn on, centre 

seam on back with slit, length 110 cm. 

New, lighter quality: 100 % PrimeCotton, may be boiled, easy to iron and 

ideal for industrial use, easy-care. 


36 KE10.1 1 42,80 

38 KE11.1 1 42,80 

40 KE12.1 1 42,80 

42 KE13.1 1 42,80 

44 KE14.1 1 42,80 

46 KE15.1 1 42,80 

48 KE16.1 1 42,80 

50 KE17.1 1 42,80 

52 KE18.1 1 45,15 

54 KE19.1 1 45,15 

Sekuroka ® -men's lab coats 

With lapel and hidden, sewn on buttons and belt on back. Length 110 cm. 

New, lighter quality: 100 % PrimeCotton, boil-fast, easy to iron and 

suitable for industrial wear, easy-care. German sizes. 


46 EC50.1 1 45,70 

48 EC51.1 1 45,70 

50 EC52.1 1 45,70 

52 EC53.1 1 45,70 

54 EC54.1 1 45,70 

56 EC55.1 1 45,70 

58 KE05.1 1 47,25 

60 KE06.1 1 47,25 

62 KE07.1 1 50,45 


Sekuroka ® -overalls 

Type 5 and 6. One-piece, made of PP with PE-layer. Cellular. Antistatic, 

dustproof, water-repellant and partially splashproof against aggressive 

substances. Highly resistant and abrasion proof. With hood and two-way zip 

with cover. Elasticated wasit, arms and legs. German sizes. 


48/50 A844.1 2 11,80 

52/54 A845.1 2 11,80 

56/58 A846.1 2 11,80 

60/62 A847.1 2 11,80 

Sekuroka ® -aprons 

Acc. to EN 340. Made of flexible, robust PVC. Highly resistant against many 

chemicals, fats and oils. Extremely abrasion proof. With welded PVC 

eyelets for longer durability. Manufactured exclusively from FDA-approved 

materials and therefore suitable for the food industry. Watertight. 

Dimensions: L 115 x W 90 cm. 

Thickness (mm) Design Colour Category Art. No. Pack Qty. € 

0,508 pretied green III L073.1 3 25,05 

0,152 loose ties white II L074.1 12 37,05 

28

Protective spectacles and accessories 


Protective goggles for spectacle wearers, 

super OTG 

Acc. to EN 166, EN 170 and EN 172 (only Art. No. KX41.1). 

Can be worn over most standard spectacles. 

• Scratchproof, non-fogging PC lens 

• Hinge-free earpiece made of Grilamid ® 

• Soft earpiece ends 

• Weight 57 g 

Frame colour Lens design Art. No. Pack Qty. € 

blue clear KX39.1 1 17,75 

black clear KX40.1 1 17,75 

black tinted grey KX41.1 1 19,30 

UV-safety spectacles racer MT 

Acc. to EN 166, EN 170 and EN 172 (only Art. No. KX38.1). 

Special features: 

• Flexible metal frame 

• Adjustable nosepiece 

• Scratchproof, non-fogging PC lens 

• Weight 40 g 

Lens design Art. No. Pack Qty. € 

clear KX37.1 1 17,75 

tinted grey KX38.1 1 19,90 

Sekuroka ® -panorama spectacles, small 

Acc. to EN 166:2001. Particularly suitable for women and narrow faces. 

Very flexible, adjust to the shape of the face. 

Non fogging lens made of polycarbonate. 

Indirect ventilation. Headband made of polyester and rubber. 

Protect against liquids, coarse dust and metal speckles. 


AH80.1 1 11,40 


Sekuroka ® -cleaning fluid 

Silicone-free cleaning and protecting fluid for spectacles, screens and other 

sensitive glass surfaces. Environmentally friendly, without propellent gas. 

Art. No. Pack Qty. (ml) € 

1317.1 100 5,00 

Sekuroka ® -safety boxes for spectacles 

Made of breakproof plastic. With rounded edges. Ideal for storing protective 

spectacles at work place. Boxes have a neutral design and can labelled 

with madatory symbol (N413.1). 

Dimensions: W 236 x D 120 x H 120 mm. 


blue N426.1 1 9,10 

transparent N427.1 1 11,35 

Sekuroka ® -spectacles bag 

Made of nylon. Suitable for all spectacles and full-view goggles. 


T708.1 1 4,65 

29

Disposal 


Broken glass disposal box 

For safe collection and disposal of broken glass materials. 

• Made of extra-strength cardboard, with a 50 µm thick PE-insert bag for 

prevent residual fluid from escaping 

• Large flap in lid for simple filling 

• Seal safety lid for disposal when box is full 

• Printed in four languages (German, English, French and Spanish) 

• Folded flat for space-saving storage 

• 2 sizes; small container suitable for the lab bench 

Model Max. loading weight Dimensions W x D x H Art. No. Pack 

€ 

(kg) 

(cm) 

Qty. 

small 5.5 20 x 20 x 25 KN69.1 6 29,85 

large 18 30 x 30 x 69 KN70.1 6 50,90 

Disposal bags with sterilisation indicator 

• For steam sterilisation at 121 °C 

• Made of HDPE, thickness 30 µm, material in acc. with ASTM D1709-98 

• With sterilisation indicator field, turns dark after autoclaving 

• With imprinted "Biohazard" warning symbol 

• Labelled in German, English, French and Spanish 

• Matches disposal bag stand KN74.1.1ff 

Dimensions W x L Volume max. matches Art. No. Pack Qty. € 

(mm) 

(l) 

300 x 610 3.8 KN74.1 KN71.1 100 58,45 

610 x 760 45.4 KN75.1 KN72.1 100 147,30 

610 x 910 75.7 KN76.1 KN73.1 100 155,90 

Sekuroka ® -disposal bags 

Ideal for laboratory waste such as used pipettor tips, test tubes and vials. 

Sterilizable to +121 °C. Bags should be left open during autoclaving. 

Dimensions: W 200 x L 300 mm. 

Made of 40 μm thick PP in dispenser box 


E706.1 100 per pack 8,55 

Made from 30 µm strong PE, 100 tissues on a preperforated roll 


H736.1 5 Rolls 12,40 

Sekuroka ® -disposal bag holder 

Wire frame with white powder coating and anti-slip rubber feet. 

Upper ∅ 125 mm, height 250 mm. Ideal for all lab benchtops. 

For disposal bags W 200 x L 300 mm. 


Sekuroka ® -holder, incl. 100 PP bags (set) E705.1 1 16,10 

Sekuroka ® -disposal bag holder H508.1 1 8,90 

Disposal bag stand 

Matching the disposal bags with sterilisation indicator KN71.1ff. Frame 

made of high-grade steel, underside made of polypropylene. Autoclavable. 

Bag and contents are supported safely. 

In addition, the polypropylene underside serves as a collecting vessel in the 

event of unintentional leakage of the bag. 

Small bag holder ideal for bench work or the lab table. 

Model Dimensions W x L x H Matching bags Art. No. Pack Qty. € 

(cm) 

S 18.5 x 35.6 x 47 KN71.1 KN74.1 1 42,15 

M 35.6 x 35.6 x 54.6 KN72.1 KN75.1 1 62,80 

L 35.6 x 35.6 x 69.6 KN73.1 KN76.1 1 60,75 

30

Filtration 

Rotilabo ® -folded filters 

Filter paper for qualitative analysis. Made of 100 % cellulose. 

Ash content 0.06 %. 

Type 113P 

Medium filtration speed, filtration speed acc. to DIN 53137: 50s 

Surface weight: 87 g/m 2 , retention range: 5-8 µm 

Membrane-∅ (mm) Model Thickness (mm) Art. No. Pack Qty. € 

70 113P 0,16 CA05.1 100 17,00 

90 113P 0,16 CA06.1 100 18,20 

110 113P 0,16 CA07.1 100 18,65 

125 113P 0,16 CA08.1 100 19,80 

150 113P 0,16 CA09.1 100 19,85 

185 113P 0,16 CA10.1 100 23,20 

210 113P 0,16 CA11.1 100 28,30 

240 113P 0,16 CA12.1 100 32,45 

270 113P 0,16 CA13.1 100 35,70 

320 113P 0,16 CA14.1 100 49,40 

Type 600P 

Fast filtration speed, filtration speed acc. to DIN 53137: 30s 

Surface weight: 64 g/m 2 , retention range: 13 µm 

Membrane-∅ (mm) Model Thickness (mm) Art. No. Pack Qty. € 

70 600P 0,15 CA15.1 100 9,65 

100 600P 0,15 CA16.1 100 11,10 

110 600P 0,15 CA17.1 100 10,95 

125 600P 0,15 CA18.1 100 12,20 

150 600P 0,15 CA20.1 100 12,90 

185 600P 0,15 CA21.1 100 13,75 

240 600P 0,15 CA23.1 100 16,70 

320 600P 0,15 CA25.1 100 23,50 

400 600P 0,15 CA27.1 100 27,95 

450 600P 0,15 CA28.1 100 40,05 

500 600P 0,15 CA29.1 100 45,45 

Rotilabo ® -germ testing paper 

Folded, moisture-resistant germ testing paper, acc. to NEEB. 

For carrying out germ resistance tests, e.g. for root vegetable seeds. 

Surface weight: 160 g/m 2 . Format: width 110 mm, fold depth 20 mm, 

double folds 50 units, length 2 m. 


AT14.1 1 2,75 

PTFE-membrane filters without support structure 

Hydrophobic PTFE-membrane filters 

• Application: Filtration under extreme chemical or thermal conditions, 

clear filtration of acids, lyes, cryogenic liquids and fuels, analysis of 

hydraulic liquids, RNA-isolation 

• Hydrophobic PTFE-membranes become hydrophilic when they are 

wetted with methanol or other liquids with low surface tension 

• Membrane strength: 130-140 µm 

• Max. operating temperature: 260 °C, autoclavable, colour: white 

Pore size (μm) Membrane-∅ (mm) Art. No. Pack Qty. € 

5,0 13 CX59.1 100 244,05 

5,0 25 CX60.1 100 274,15 

5,0 47 CX61.1 100 445,05 

5,0 90 CX62.1 25 333,25 

10,0 13 CX63.1 100 242,95 

10,0 25 CX64.1 100 258,00 

10,0 47 CX65.1 100 408,50 

10,0 90 CX66.1 25 328,95 

PVDF-membrane filters, hydrophilic 

Surface-modified polyvinylidene fluoride stands out for its minimal 

protein bonding 

• Applications: sterile filtration of protein solutions, tissue culture media, 

additives, antibiotics and alcoholic solutions; removal of particles, 

biological assays (e.g. recipe-bonding studies, TCA-precipitation) 

• Protein binding: 4 µg/cm 2 

• Membrane strength: approx. 125 µm 

• Surface: smooth 

• Autoclavable, colour: white 

Pore size (μm) Membrane-∅ (mm) Art. No. Pack Qty. € 

0,1 13 CX11.1 100 95,50 

0,1 25 CX12.1 100 113,95 

0,1 47 CX13.1 100 159,10 

0,1 90 CX14.1 50 265,55 

0,22 13 CX15.1 100 96,70 

0,22 25 CX16.1 100 118,25 

0,22 47 CX17.1 100 168,80 

0,22 90 CX18.1 50 280,60 

0,45 13 CX19.1 100 96,70 

0,45 25 CX20.1 100 118,25 

0,45 47 CX21.1 100 165,55 

0,45 90 CX22.1 50 280,60 

0,65 13 CX23.1 100 96,70 

0,65 25 CX24.1 100 117,20 

0,65 47 CX25.1 100 155,90 

0,65 90 CX26.1 50 227,90 

5,0 13 CX27.1 100 94,30 

5,0 25 CX28.1 100 118,25 

5,0 47 CX29.1 100 190,30 

31

SPECIAL PRICES! SPECIAL PRICES! 

NEW 


Solar pocket calculator Citizen WR-3000 

Water and dustproof housing according to IP 54. With shock-absorbing 

rubber bordering. 12-digit LCD display. Solar and battery operated. 

VAT calculation. Root/percentage calculation. Memory. 

Dimensions: 162 x 106 x 38 mm. Weight approx. 140 g. 

Delivery incl. backup battery. 


LN01.1 1 15,00 

Safety pipettor ball "Flip" 

Made of natural rubber. With detachable safety valve. Evacuating via 

removable automatic valve. Can be cleaned inside. Suction and emptying 

with the aid of two operating points. Suitable for volumetric and graduated 

pipettes from 20-100 ml with ∅ from 6-8 mm. 


red C261.1 1 7,50 

yellow C262.1 1 7,50 

green C263.1 1 7,50 

blue C264.1 1 7,50 

Sekuroka ® -UV-safety spectacle LED Light Vision 

Acc. to EN 166, EN 170. 

• Safety spectacles with height-adjustable and extremely bright LEDs 

• Built-in batteries (2 x round cell batteries CR2032), long battery life 

(over 50 hours) 

• Illuminates dark areas and at the same time protects the eyes. Hands are 

free to work, e.g. for electric work, car repairs, installation work, 

do-it-yourself jobs, mechanical work in the dark, reading... 

• With rubber padding on ear and nose-piece for extra comfort 

• Non-fogging lens made of polycarbonate, also suitable for working 

with UV-light 

Delivery includes: Microfiber pouch for storing and cleaning. 

Weight 61.4 g. 


KA25.1 1 13,95 

Rotilabo ® -safety wash bottles 

Bottle made of LDPE. Screw cap and squirt tube made of PP. 

The pressure control valve in cap largely prevents the liquid from running 

out, dripping or escaping through the tube, e.g. after temperature 

fluctuation. 

500 ml 

Inscription Material Art. No. Pack Qty. € 

Acetone PP HL51.1 1 6,35 

Dist. Water LDPE HL52.1 1 6,35 

Ethyl acetate LDPE HL53.1 1 6,35 

Ethanol LDPE HL54.1 1 6,35 

Isopropanol LDPE HL55.1 1 6,35 

Methanol LDPE HL56.1 1 6,35 

1000 ml 

Inscription Material Art. No. Pack Qty. € 

Acetone PP HL57.1 1 7,75 

Dist. Water LDPE HL58.1 1 7,75 

Ethyl acetate LDPE HL60.1 1 7,75 

Ethanol LDPE HL59.1 1 7,75 

Isopropanol LDPE HL61.1 1 7,75 

Methanol LDPE HL62.1 1 7,75 

Phone 

+49 721/56 06 510 

FAX 

+49 721/56 06 111 

E-MAIL 

info@carlroth.com 

INTERNET 

www.carlroth.com 

For ordering and information about prices and delivery 

in your country please contact us or your local distributor. 

www.carlroth.com - about - representatives 

Carl Roth GmbH + Co. KG 

Schoemperlenstraße 3-5 

D-76185 Karlsruhe 

All supplies and deliveries are subject to the terms and conditions of sale and delivery of Carl Roth GmbH + Co. KG, Karlsruhe

SPECIAL PRICES! - bei Carl Roth

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?