You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Metal</strong> <strong>Protection</strong> <strong>Colour</strong> <strong>Guide</strong><br />
When metal protection really matters<br />
<strong>Wattyl</strong> Killrust 1
<strong>Wattyl</strong> Killrust is the tried and<br />
trusted brand in metal protection<br />
For more than 40 years, Killrust has been a leader in high quality preparatory and topcoat paints<br />
that protect metal surfaces from the harsh Australian climate. That’s why Killrust is Number 1 in<br />
metal protection.<br />
Contents<br />
Why Choose Killrust.................................................................................. 2<br />
Understanding the <strong>Wattyl</strong> Killrust 3 Step System.................................... 3<br />
Killrust Preparatory Products................................................................. 4<br />
Killrust Priming Products.......................................................................... 5<br />
Killrust Epoxy Gloss Enamel..................................................................... 6<br />
Killrust Satin Enamel................................................................................. 8<br />
Killrust Roof Paint..................................................................................... 9<br />
Killrust Hammered <strong>Metal</strong> Finish............................................................... 9<br />
Killrust High Heat Enamel......................................................................... 9<br />
Killrust Woodstove Enamel....................................................................... 9<br />
Protecting <strong>Metal</strong> Surfaces Using the Killrust System <strong>Metal</strong> <strong>Guide</strong>....... 10<br />
Killrust Quick Product Reference <strong>Guide</strong>................................................. 11<br />
2<br />
<strong>Wattyl</strong> Killrust
Understanding the<br />
<strong>Wattyl</strong> Killrust 3 Step System<br />
Killrust has been specifically formulated to offer the ultimate in metal protection through the<br />
<strong>Wattyl</strong> Killrust 3 step system. This system will protect, rejuvenate and beautify your metal surfaces<br />
by following the 3 easy steps.<br />
Killrust offers superior solutions for<br />
preparing rusted metal, clean steel<br />
and difficult to reach surfaces.<br />
The Killrust preparatory range provides superior solutions<br />
for preparing rusted metal, clean steel and difficult to reach<br />
surfaces. The result is a stable metal surface which is better<br />
prepared for topcoating.<br />
Killrust primers enhance adhesion and inhibit<br />
rust to fight corrosion and create a protective<br />
barrier for greater metal protection.<br />
The Killrust primer range contain rust inhibiting pigments<br />
to chemically fight rust, whilst also forming a protective<br />
barrier. They have excellent adhesion properties and provide<br />
a sound base for topcoating.<br />
The range of Killrust colours in Gloss<br />
and Satin Enamel are designed to<br />
provide superior protection.<br />
A range of corrosion inhibiting enamels that provide a tough,<br />
flexible coating with excellent durability properties. A wide<br />
range of colours including factory tinted COLORBOND®<br />
Killrust topcoats can be used indoors or outdoors and,<br />
with the correct primer/undercoat, can even be used on<br />
timber, brick, fibro, concrete and other surfaces. No primer<br />
is required for new or lightly rusted steel or iron surfaces.<br />
When metal protection really matters,<br />
you can always trust Killrust<br />
<strong>Wattyl</strong> Killrust 3
Killrust Preparatory Products<br />
Killrust Rust-Eeter ®<br />
A clear solution formula that neutralises rust and<br />
provides a suitable surface for priming and painting.<br />
Killrust Rust-Eeter® converts rust to stop corrosion<br />
and is suitable for use on wrought iron and ferrous<br />
metal surfaces.<br />
Killrust Rust-Eeter®<br />
Description: A clear solution formula that provides a<br />
suitable surface for subsequent priming and painting<br />
Usage: Wrought iron and ferrous metal surfaces<br />
Application: Brush or spray gun<br />
Recoat: 24 hours<br />
Clean up: Killrust Cold Galvit Thinner<br />
Coverage: Up to 10-12m 2 / Litre<br />
No of coats: 1 coat<br />
Available sizes: 200ml and 500ml<br />
Rusted Mild Steel<br />
Rust - Eeter<br />
Killrust Cold Galvit<br />
A zinc rich, cold galvanising primer that provides<br />
long term, extra heavy duty corrosion protection.<br />
Killrust Cold Galvit encapsulates the metal in a zinc<br />
film. The zinc coating repairs damaged surfaces.<br />
Ideal for use on clean, rust free steel in highly<br />
corrosive environments including coastal regions.<br />
It is also suitable for use on<br />
steel handrails, balustrading<br />
and other structural steelwork.<br />
Killrust Cold Galvit<br />
Description: A zinc rich cold galvanising primer<br />
Usage: Handrails, balustrading and other structural<br />
steelwork<br />
Application: Brush, roller, spray gun or aerosol<br />
Recoat: 24 hours<br />
Clean up: Killrust Cold Galvit<br />
Thinner<br />
Coverage: Up to 9m 2 / Litre<br />
No of coats: 1 coat<br />
Available sizes: 250ml, 500ml,<br />
1L, 4L and 375g aerosol<br />
Cold Galvit<br />
Killrust Fishoilene<br />
An anti-corrosive protective fluid for rusted steel<br />
where normal surface preparation and coating is<br />
difficult. Killrust Fishoilene creeps into cracks and<br />
crevices whilst forcing out air and moisture that<br />
cause rust. It is ideal for hard to reach areas<br />
including cracks, crevices, along pipes, nuts,<br />
bolts, hinges and welds.<br />
Killrust Fishoilene<br />
Description: An anti-corrosive protective fluid for<br />
rusted steel<br />
Usage: For areas where surface preparation and<br />
coating is difficult<br />
Application: Brush, roller, spray gun or aerosol<br />
Recoat: Allow 48 hours to semi dry*<br />
Clean up: Mineral turpentine<br />
Coverage: Up to 12m 2 / Litre<br />
No of coats: 1 coat<br />
Available sizes: 500ml, 1L, 4L<br />
and 300g aerosol<br />
*Killrust Fishoilene is semi drying only and<br />
not recommended for topcoating<br />
Wrought iron gate prepared with Killrust Rust-Eeter®<br />
4<br />
<strong>Wattyl</strong> Killrust
Killrust Priming Products<br />
Killrust Etch Primer ®<br />
A fast drying, anti-corrosive primer with excellent<br />
adhesion to non-ferrous metal surfaces with added<br />
inhibiting pigments to reduce damaging corrosion.<br />
Suitable for use on aluminium, brass, copper,<br />
stainless steel, zinc and lead surfaces. Ideal for use<br />
on aluminium windows, doors,<br />
gutters, fences, gates, railing<br />
and down pipes.<br />
Killrust Etch Primer<br />
Description: A fast drying, anti-corrosive primer<br />
Usage: Non-ferrous metal surfaces including<br />
aluminium, brass, copper, stainless steel, zinc and lead<br />
Application: Brush, roller, spray gun or aerosol<br />
Recoat: 1 hour<br />
Clean up: Methylated spirits<br />
Coverage: Up to 10m 2 / Litre<br />
No of coats: 1 coat<br />
Available sizes: 500ml, 1L, 4L<br />
and 300g aerosol<br />
Etch Primer<br />
Killrust Heavy Duty Primer<br />
A high performance, anti-corrosive primer that forms<br />
a tough and flexible coating to resist corrosion even<br />
in harsh environments. The rust inhibiting pigments<br />
reduce damaging rust and corrosion. It is ideal for<br />
use on ferrous and non-ferrous metals including<br />
wrought iron, steel, ZINCALUME® and galvanised<br />
iron. Suitable for use on roofs,<br />
wrought iron railings, gutters,<br />
down pipes and general<br />
structural steelwork.<br />
Killrust Heavy Duty Primer<br />
Description: A high performance, anti-corrosive primer<br />
Usage: Ferrous and non-ferrous metals including<br />
wrought iron and steel, ZINCALUME® and galvanised<br />
iron<br />
Application: Brush, roller, spray gun or aerosol<br />
Recoat: 4 hours<br />
Clean up: Methylated spirits<br />
Coverage: Up to 12m 2 / Litre<br />
No of coats: 1 coat<br />
Available sizes: 250ml, 500ml,<br />
1L, 4L and 300g aerosol<br />
Wrought iron fence prepared with Killrust Heavy Duty Primer<br />
Heavy Duty Primer<br />
<strong>Wattyl</strong> Killrust 5
Killrust Topcoat Products<br />
Killrust Epoxy Gloss Enamel<br />
An advanced anti-corrosive topcoat epoxy enamel<br />
that provides excellent durability and maximum<br />
metal protection: available in an attractive range<br />
of gloss finish colours or Matt Black finish. Killrust<br />
Epoxy Gloss Enamel can be applied directly onto<br />
new and lightly rusted steel and wrought iron<br />
surfaces without the need of a primer. It is ideal for<br />
use on metal fences, gutters, gates, railings, and<br />
other general metal coating applications. Killrust<br />
Epoxy Gloss Enamel White Base can be tinted to<br />
the full range of White based colours * .<br />
*Enamel paints yellow over time which may cause some colour variance<br />
when compared to acrylic paints, particularly in white based tones.<br />
Killrust Epoxy Gloss Enamel<br />
Description: An advanced anti-corrosive topcoat<br />
epoxy enamel<br />
Usage: Directly to new and lightly rusted steel and<br />
wrought iron or all suitably prepared and primed metal<br />
surfaces<br />
Application: Brush, roller, spray gun or aerosol<br />
Recoat: 16 hours<br />
Clean up: Mineral turpentine<br />
Coverage: Up to 14m 2 / Litre<br />
No of coats: 2 coats<br />
Available sizes: 250ml, 500ml,<br />
1L, 4L and 300g aerosol<br />
Victorian Garden Chair topcoated with Killrust Epoxy Gloss Enamel - Mid Brunswick Green<br />
Wrought Iron Gate topcoated with Killrust Epoxy Gloss Enamel - Black<br />
White<br />
Sourdough<br />
F18w / I100-C<br />
Cargo White<br />
B16w / F050-C<br />
Ethereal White<br />
B2w / F060-E<br />
WH<br />
WH<br />
Confetti Shower<br />
C9w / G100-C<br />
Monterey White<br />
A41w / B280-H<br />
Moondance<br />
B52w<br />
WH<br />
WH<br />
WH<br />
To match ColoRbond ®<br />
Surfmist ® A6w / L050-B<br />
WH To match ColoRbond ® WH Old Papyrus<br />
Classic Cream ® A16w / L060-D A75w / J070-B<br />
Maltshake<br />
A42w / B200-H<br />
Sungold<br />
• An additional finishing coat may be required. Authentic Heritage colour. Also available in Epoxy Gloss Enamel aerosol.<br />
Factory tinted, available on shelf. Tint bases: WH - White, P - Pewter, MB - Mission Brown, DR - Delicious Red, S - Sungold,<br />
DBG - Deep Brunswick Green, NUB - New Ultra Blue, O - Ocean. COLORBOND ® , BlueScope and ® colour names are registered trademarks<br />
of BlueScope Steel Limited. <strong>Colour</strong>s approximate the COLORBOND ® pre-painted steel colours.<br />
WH<br />
WH<br />
Tennessee Dawn<br />
A65w / B300-I<br />
Deep Bronze<br />
Burnt Amber<br />
WH<br />
S<br />
S<br />
Moon Shell<br />
A80w / D060-I<br />
WH To match ColoRbond ® WH Shingle<br />
Paperbark ® /Terrace ® A66w / L060-B<br />
Light Bronze<br />
Delicious Red<br />
WH<br />
WH<br />
S<br />
All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur.<br />
6<br />
<strong>Wattyl</strong> Killrust
Sateen Snow<br />
A63w / K030-D<br />
WH<br />
Kosciusko Pebble<br />
A64w / J060-B<br />
WH<br />
Mission Brown<br />
A62w / L100-C<br />
Deep Indian Red<br />
C62w / L100-D<br />
DR<br />
Black<br />
(also available in Matt)<br />
Alta Sierra<br />
A43w / H090-A<br />
WH<br />
Grapevine<br />
P<br />
Dusk Pink<br />
WH<br />
Mink Brown<br />
P<br />
Warm Chocolate<br />
MB<br />
Powder White<br />
D18w / I100-A<br />
WH<br />
Scallopini<br />
A44w / K020-A<br />
WH<br />
To match COLORBOND® WH<br />
Dune ® A45w / L090-D<br />
Fossil Dust<br />
P<br />
Mousse<br />
P<br />
Alabaster<br />
A8w / F110-F<br />
WH<br />
Gracieux<br />
A31w / D210-I<br />
WH<br />
To match COLORBOND ® WH<br />
Shale Grey ® A24w / L010-D<br />
Aluminium<br />
Pewter<br />
Creamy Natural<br />
F17w / K010-A<br />
Soft Cream<br />
Breezy Day<br />
E54w / G040-D<br />
Simply Heaven<br />
E20w / D250-B<br />
WH<br />
WH<br />
WH<br />
WH<br />
Bambusa<br />
A76w / J050-C<br />
Grass<br />
Canal<br />
New Ultra Blue<br />
WH<br />
WH<br />
P<br />
Stoneleigh<br />
A78w / J070-C<br />
Bright Green<br />
Aqua<br />
Navigator<br />
WH<br />
S<br />
P<br />
O<br />
To match COLORBOND ®<br />
Wilderness ® /Willow ® F72w/L040-D<br />
Mid Brunswick DBG<br />
To match COLORBOND<br />
Woodland Grey ® /Grey Ridge ® A28w/L030-A<br />
Deep Brunswick Green<br />
Green<br />
F51w / L030-D<br />
Wedgewood<br />
P Dark Teal<br />
o<br />
To match COLORBOND ® NUB Ocean<br />
Deep Ocean ® /Bluestone ®<br />
E50w / L020-D<br />
<strong>Wattyl</strong> Killrust 7<br />
All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur.
Killrust Satin Enamel<br />
A single pack, fast drying, satin enamel with an<br />
anti-corrosive formulation. It is designed with<br />
a satin sheen level, and factory tinted to match<br />
popular COLORBOND® pre-coated steel colours.<br />
Killrust Satin Enamel is ideal for use on pre-coated<br />
metal surfaces where touching up and colour<br />
matching is required. It is available in an aerosol<br />
pack which means it is easy to use and equipment<br />
clean up isn’t required. Available in a range of<br />
20 standard COLORBOND® colours.<br />
Garage doors and gutters touched up with Killrust Satin Enamel -<br />
ColoRbond® Deep Ocean®/Bluestone®<br />
Killrust Satin Enamel<br />
Description: A single pack, fast drying satin enamel<br />
with an anti-corrosive formulation<br />
Usage: Pre-coated COLORBOND ® and other metal<br />
surfaces where touching up and colour<br />
matching is required<br />
Application: Aerosol<br />
Recoat: 1-8 hours<br />
Clean up: No equipment clean up required<br />
Coverage: Up to 2m 2 / 300g<br />
No of coats: 2+ coats<br />
Available sizes: 300g aerosol<br />
To match ColoRbond ®<br />
Classic Cream A16w/L060-D<br />
To match ColoRbond ®<br />
Surfmist ® A6w/L050-B<br />
To match ColoRbond ®<br />
Windspray ® A26w/L020-B<br />
To match ColoRbond ®<br />
Domain ® B250-A<br />
To match ColoRbond ®<br />
Shale Grey A24w/L010-D<br />
To match ColoRbond ®<br />
Bushland ® /Teatree ® A84w/L030-B<br />
To match ColoRbond ®<br />
Harvest ® B260-D<br />
To match ColoRbond ®<br />
Evening Haze ® /Summershade ® F130-D<br />
To match ColoRbond ® Pale<br />
Eucalypt ® /Meadow ® F73w/L040-C<br />
To match ColoRbond ®<br />
Paperbark ® /Terrace ® A66w/L060-B<br />
To match ColoRbond ®<br />
Riversand ® B010-H<br />
To match ColoRbond ®<br />
Wilderness ® /Willow ® F72w/L040-D<br />
To match ColoRbond ®<br />
Dune ® A45w/L090-D<br />
To match ColoRbond ®<br />
Jasper ® B62w/L090-C<br />
To match ColoRbond ® Cottage<br />
Green ® /Evergreen ® F40w/L040-A<br />
All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur.<br />
To match ColoRbond ®<br />
Woodland Grey ® /Grey Ridge ®<br />
A28w/L030-A<br />
8<br />
<strong>Wattyl</strong> Killrust<br />
To match ColoRbond ®<br />
Ironstone ® A40w/L010-A<br />
To match ColoRbond ® Deep<br />
Ocean ® /Bluestone ® E50w/L020-D<br />
To match ColoRbond ®<br />
Monument ® /Hedge ® C310-A<br />
To match ColoRbond ®<br />
Nightsky ® A29w/L010-C
Killrust Roof Paint<br />
A high quality, anti-corrosive roof paint that has<br />
been specifically formulated to protect exterior<br />
roof and structural surfaces. Its excellent durability<br />
combats excessive weather conditions and is also<br />
suitable for use in areas used for the collection<br />
of drinking water. Killrust Roof Paint is also suitable<br />
for use on primed galvanised iron and pre-coated<br />
steel roof surfaces. Available in 5 factory tinted<br />
colours.<br />
Killrust Epoxy Roof Paint<br />
Description: A high quality, anti-corrosive roof paint<br />
Usage: Primed galvanised iron and pre-coated steel<br />
roof surfaces<br />
Application: Brush, roller and<br />
spray gun<br />
Recoat: 24 hours<br />
Clean up: Mineral turpentine<br />
Coverage: Up to 14m 2 / Litre<br />
No of coats: 1-2 coats<br />
Available sizes: 4L and 10L<br />
Roof Silver<br />
Roof Grey<br />
Roof Green Roof Red Roof Charcoal<br />
Killrust Hammered <strong>Metal</strong> Finish<br />
A decorative coating resembling hammered<br />
sheet metal that camouflages imperfect surfaces<br />
and hides unsightly dents, scratches and weld<br />
joints. Killrust Hammered <strong>Metal</strong> Finish can be<br />
used on imperfect metal surfaces, weld joints<br />
and equipment that have been pre-coated in<br />
a similar finish. It is available in an aerosol pack<br />
which means it is easy to use, less mess and<br />
no equipment clean up required. Available in<br />
4 factory tinted colours.<br />
Killrust Hammered <strong>Metal</strong> Finish<br />
Description: A decorative coating resembling<br />
hammered sheet metal<br />
Usage: Imperfect metal surfaces or equipment<br />
that has been pre-coated in a similar finish<br />
Application: Aerosol<br />
Recoat: 1-8 hours<br />
Clean up: No equipment clean up required<br />
Coverage: Up to 2m 2 / 300g<br />
No of coats: 2+ coats<br />
Available sizes: 300g aerosol<br />
Blue Ocean<br />
Satin Black<br />
Satin Black<br />
Charcoal<br />
Killrust High Heat Enamel<br />
Silver<br />
A fast drying, satin black finish which provides<br />
heat resistant protection to interior and exterior<br />
metal surfaces exposed to heat up to 650ºC.<br />
Killrust High Heat Enamel does not require a<br />
primer and is ideal for BBQ hoods and engine<br />
exhaust components.<br />
Killrust Woodstove Enamel<br />
*Killrust High Heat Enamel cannot be<br />
used over vitreous enamel coatings or<br />
on surfaces that come in direct contact<br />
with food.<br />
A fast drying, satin black finish which provides<br />
heat resistant protection to interior and exterior<br />
metal surfaces exposed to heat up to 650ºC.<br />
Killrust Woodstove Enamel does not require a<br />
primer and is ideal for slow combustion wood<br />
heaters, stovetops, fire pits, braziers and more.<br />
It is available in an aerosol pack which means<br />
there is less mess, easy to use and no equipment<br />
clean up required.<br />
**Killrust Woodstove Enamel cannot<br />
be used over vitreous enamel coatings<br />
or on surfaces that come in direct<br />
contact with food.<br />
Gunmetal<br />
Killrust High Heat Enamel<br />
Characteristics: A fast drying, satin black finish which<br />
provides heat resistant protection<br />
Use on: For BBQ hoods, engine exhaust components<br />
and more*<br />
Apply with: Aerosol<br />
Recoat: 1-8 hours<br />
Curing: Allow to dry for 1 hour, then cure<br />
by firing up the equipment to reach 300ºC<br />
for 1 hour or 2 hours at 200ºC<br />
Clean up: No equipment clean up required<br />
Coverage: Up to 3m 2 / 340g<br />
No of coats: 1+ coats<br />
Available sizes: 340g aerosol<br />
Killrust Woodstove Enamel<br />
Characteristics: A fast drying, satin black finish which<br />
provides heat resistant protection<br />
Use on: For slow combustion wood heaters,<br />
stovetops, fire pits and braziers and more**<br />
Apply with: Aerosol<br />
Recoat: 1-8 hours<br />
Curing: Allow to dry for 1 hour, then cure<br />
by firing up the equipment to reach 300ºC<br />
for 1 hour or 2 hours at 200ºC<br />
Clean up: No equipment clean up required<br />
Coverage: Up to 3m 2 / 340g<br />
No of coats: 1+ coats<br />
Available sizes: 340g aerosol<br />
<strong>Wattyl</strong> Killrust 9<br />
All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur.
Protecting <strong>Metal</strong> Surfaces Using the Killrust System <strong>Metal</strong> <strong>Guide</strong><br />
To achieve the best possible results, identify your surface type and condition<br />
and follow the recommended steps shown in the following chart<br />
SURFACE TYPE<br />
CONDITION<br />
STEEL OR WROUGHT IRON<br />
New/Unpainted<br />
Clean surface to remove oil<br />
and grease<br />
STEEL OR WROUGHT IRON<br />
Rusted<br />
Wire brush, scrape or sand<br />
surface to remove rust and any<br />
loose, peeling or flaking paint<br />
Apply:<br />
KILLRUST<br />
RUSTEETER<br />
Apply: KILLRUST HEAVY DUTY PRIMER<br />
GALVANISED IRON AND<br />
ZINCALUME ®<br />
New<br />
Clean surface to remove<br />
oil and grease<br />
Apply: KILLRUST HEAVY DUTY PRIMER<br />
GALVANISED IRON AND<br />
ZINCALUME ®<br />
Weathered/<br />
Non rusted<br />
Remove corrosion salts from surface<br />
with a stiff bristle brush or nylon scourer<br />
and water<br />
Apply: KILLRUST HEAVY DUTY PRIMER<br />
ALUMINIUM BRASS, LEAD<br />
TIN, COPPER, AND<br />
STAINLESS STEEL<br />
Unpainted/Bare<br />
Remove all corrosion, peeling and flaking<br />
paint by wire brushing, scraping or sanding. Clean<br />
surface where possible to remove oil and grease<br />
Apply: KILLRUST ETCH PRIMER<br />
Steel or Wrought Iron<br />
New/Unpainted in<br />
extreme conditions<br />
Clean surface to remove oil,<br />
grease and millscale<br />
Apply:<br />
KILLRUST<br />
COLD GALVIT<br />
Apply: KILLRUST HEAVY DUTY PRIMER<br />
Steel or Wrought Iron<br />
Rusted/Unpainted in<br />
extreme conditions<br />
Remove all rust, peeling and<br />
flaking paint by wire brushing,<br />
scraping, sanding or grinding<br />
back to bright metal<br />
Apply:<br />
KILLRUST<br />
COLD GALVIT<br />
Apply: KILLRUST HEAVY DUTY PRIMER<br />
PREVIOUSLY PAINTED<br />
SURFACES<br />
Good Condition<br />
Sand surface lightly until Gloss is removed;<br />
remove dust. Treat mould spots with bleach<br />
and rinse with clean water<br />
Previously Painted<br />
Surfaces<br />
Poor/Rusted<br />
Remove all rust, peeling and flaking paint by<br />
wire brushing, scraping, sanding or grinding<br />
back to bright metal<br />
Apply: KILLRUST HEAVY DUTY PRIMER<br />
ALL METAL SURFACES<br />
Difficult to reach<br />
areas<br />
Wire brush, scrape or sand<br />
surface to remove rust and any<br />
loose, peeling or flaking paint<br />
Apply: KILLRUST FISHOILENE*<br />
* Fishoilene is semi drying only. Not recommended for topcoating.<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL,<br />
SATIN ENAMEL OR HAMMERED METAL<br />
FINISH<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL,<br />
SATIN ENAMEL OR HAMMERED METAL<br />
FINISH<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL,<br />
SATIN ENAMEL OR HAMMERED METAL<br />
FINISH<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL,<br />
SATIN ENAMEL OR HAMMERED METAL<br />
FINISH<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL,<br />
SATIN ENAMEL OR HAMMERED METAL<br />
FINISH<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL,<br />
SATIN ENAMEL OR HAMMERED METAL<br />
FINISH<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL<br />
Apply: KILLRUST EPOXY GLOSS ENAMEL<br />
10 <strong>Wattyl</strong> Killrust
Killrust Quick Product Reference <strong>Guide</strong><br />
Killrust<br />
Product Type<br />
Killrust Product Killrust Product Description<br />
No. of<br />
Coats<br />
Application Recoat Coverage Wash Up Sizes<br />
Rust-Eeter®<br />
Cold Galvit<br />
Fishoilene<br />
Etch Primer<br />
Heavy Duty<br />
Primer<br />
Epoxy Gloss<br />
Enamel<br />
Satin Enamel<br />
Hammered <strong>Metal</strong><br />
Finish<br />
Clear solution formula that treats rusted surfaces and provides<br />
a suitable surface for subsequent priming and painting.<br />
Zinc-rich cold galvanising primer to provide<br />
long term protection against corrosion.<br />
Anti-corrosive protective fluid for rusted steel where<br />
normal surface preparation and coating is difficult.<br />
Fast drying, anti-corrosive primer for<br />
non ferrous metal surfaces.<br />
High performance, anti-corrosive primer for<br />
ferrous and non ferrous metal surfaces.<br />
1 coat<br />
1 coat<br />
1 coat<br />
1 coat<br />
1 coat<br />
Advanced anti-corrosive epoxy formula. 2 coats<br />
Single pack, fast drying satin enamel factory tinted to match<br />
popular COLORBOND® pre-coated steel colours.<br />
Brush or spray<br />
gun<br />
Brush, roller,<br />
spray gun or<br />
aerosol<br />
Brush, roller,<br />
spray gun or<br />
aerosol<br />
Brush, roller,<br />
spray gun or<br />
aerosol<br />
Brush, roller,<br />
spray gun or<br />
aerosol<br />
Brush, roller,<br />
spray gun or<br />
aerosol<br />
2+ coats Aerosol<br />
Decorative coating resembling hammered sheet metal. 2+ coats Aerosol<br />
24 hours<br />
24 hours<br />
48 hours<br />
to semi<br />
dry*<br />
1 hour<br />
4 hours<br />
16 hours<br />
1-8<br />
hours<br />
1-8<br />
hours<br />
Up to<br />
10-12m 2 / Litre<br />
Up to<br />
9m 2 / Litre<br />
Up to<br />
12m 2 / Litre<br />
Up to<br />
10m 2 / Litre<br />
Up to<br />
12m 2 / Litre<br />
Up to<br />
14m 2 / Litre<br />
Up to<br />
2m 2 / 300g<br />
Up to<br />
2m 2 / 300g<br />
Killrust Cold Galvit<br />
Thinner<br />
Killrust Cold Galvit<br />
Thinner<br />
Mineral Turpentine<br />
Methylated Spirits<br />
Methylated Spirits<br />
Mineral Turpentine<br />
No equipment<br />
clean up required<br />
No equipment<br />
clean up required<br />
200ml & 500ml<br />
250ml, 500ml,<br />
1L, 4L & 375g<br />
aerosol<br />
500ml, 1L, 4L<br />
& 300g aerosol<br />
500ml, 1L, 4L<br />
& 300g aerosol<br />
250ml, 500ml,<br />
1L, 4L & 300g<br />
aerosol<br />
250ml, 500ml,<br />
1L, 4L & 300g<br />
aerosol<br />
300g aerosol<br />
300g aerosol<br />
High Heat<br />
Enamel<br />
Fast drying satin enamel which provides heat resistant<br />
protection to interior and exterior metal surfaces up to 650ºC<br />
for BBQ hoods, engine exhaust components and more.<br />
1+ coats Aerosol 1 hour**<br />
Up to<br />
3m 2 / 340g<br />
No equipment<br />
clean up required<br />
340g aerosol<br />
Woodstove<br />
Enamel<br />
Fast drying satin enamel which provides heat resistant<br />
protection to interior and exterior metal surfaces up to 650ºC<br />
for slow combustion wood heaters, stovetops, fire pits,<br />
braziers and more.<br />
1+ coats Aerosol 1 hour**<br />
Up to<br />
3m 2 / 340g<br />
No equipment<br />
clean up required<br />
340g aerosol<br />
Roof Paint High quality, anti-corrosive roof paint.<br />
1-2<br />
coats<br />
Brush, roller or<br />
spray gun<br />
24 hours<br />
Up to<br />
14m 2 / Litre<br />
Mineral Turpentine 4L & 10L<br />
* Killrust Fishoilene is not recommended for topcoating.** Allow Killrust High Heat Enamel and Woodstove Enamel to dry for 1 hour, then cure by firing up the equipment to reach 300ºC for 1 hour or 2 hours at 200ºC.<br />
<strong>Wattyl</strong> Killrust11
For stockist information, product enquiries and technical advice please<br />
visit our website or call our customer service and technical hotlines.<br />
AUSTRALIA<br />
Phone 132 101<br />
www.wattyl.com.au<br />
NEW ZEALAND<br />
Phone 0800 735 551<br />
www.wattyl.co.nz<br />
All printed colours have been matched as close to the actual paint colour as the printing process<br />
will allow. Variation in shade may occur. Photographic and printed images may not represent<br />
the true colour. <strong>Wattyl</strong>, Killrust, Rust-Eeter and <strong>Wattyl</strong> <strong>Colour</strong> Designer are registered trademarks<br />
of <strong>Wattyl</strong> Australia Pty Limited. ABN 40 000 035 914<br />
ABN 40 000 035 914. COLORBOND®, ZINCALUME®, and ® colour names<br />
are registered trade marks of BlueScope Steel Limited.<br />
Printed 01/12<br />
CCKR007/WATKIL6<br />
12 <strong>Wattyl</strong> Killrust
Change language