Autel Maxiscan Jp701 Manual.pdf - Car Diagnostic Tool
Autel Maxiscan Jp701 Manual.pdf - Car Diagnostic Tool Autel Maxiscan Jp701 Manual.pdf - Car Diagnostic Tool
www.vtoolshop.com 2) Wait a few seconds while the scan tool is communicating with vehicle control module. 3) View control module information on the screen. Vehicle Information Vehicle VIN: 1GCEC14W5XZ214506 Save Back 4) To record the data, press Save button. 6. Updating and Printing The scan tool allows user to update software and to print out recorded test data by connecting the device to a PC or laptop with the USB cable supplied. NOTE: For detailed updating and printing instructions, refer to HELP information on the included CD. To update software and print data, you need the following tools: MaxiDiag scan tool A computer with USB ports A USB cable 1) Download update PC-Link and update files from our website www.auteltech.com 2) Place included CD into CD-ROM. 3) Follow onscreen instructions on your computer to install the PC-link. 4) Launch PC-Link when installations completed. 5) Connect the scan tool to computer with the USB cable supplied, and turn on the scan tool by pressing button. VTOOLSHOP 67 Tel:+86-0755-27823977 Web:http://www.vtoolshop.com
7. Warranty and Service 7.1 Limited One Year Warranty www.vtoolshop.com Autel warrants to its customers that this product will be free from all defects in materials and workmanship for a period of one (1) year from the date of the original purchase, subject to the following terms and conditions: 1) The sole responsibility of Autel under the Warranty is limsited to either the repair or, at the option of Autel, replacement of the code reader at no charge with Proof of Purchase. The sales receipt may be used for this purpose. 2) This warranty does not apply to damages caused by improper use, accident, flood, lightning, or if the product was altered or repaired by anyone other than the Manufacturer’s Service Center. 3) Autel shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the code reader. 4) All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. Autel reserves the right to make changes at any time without notice. 7.2 Service Procedures If you have any questions, please contact your local store, distributor or visit our website at Web:http://www.vtoolshop.com If it becomes necessary to return the scan tool for repair, contact your local distributor for more information. VTOOLSHOP 68 Tel:+86-0755-27823977 Web:http://www.vtoolshop.com
- Page 17 and 18: 2) From Unit of Measure menu, use U
- Page 19 and 20: www.vtoolshop.com 3) Press OK butto
- Page 21 and 22: www.vtoolshop.com 2) From Button St
- Page 23 and 24: www.vtoolshop.com 3.9 Battery Repla
- Page 25 and 26: www.vtoolshop.com 2) Use UP/DOWN bu
- Page 27 and 28: www.vtoolshop.com ►Test 1 Test 2
- Page 29 and 30: www.vtoolshop.com Deleting All Data
- Page 31 and 32: www.vtoolshop.com ..Protocol SAE J1
- Page 33 and 34: . Diagnostic Menu ... ►Read Codes
- Page 35 and 36: www.vtoolshop.com Erasing Codes CAU
- Page 37 and 38: www.vtoolshop.com Diagnostic Menu R
- Page 39 and 40: www.vtoolshop.com • If you record
- Page 41 and 42: Complete Data Set DTC_CNT 5 FUELSYS
- Page 43 and 44: www.vtoolshop.com 1) Use UP/DOWN bu
- Page 45 and 46: O2 Monitor Test OBD2 regulations se
- Page 47 and 48: www.vtoolshop.com Rich-Lean Threshd
- Page 49 and 50: www.vtoolshop.com On-Board Mon. Tes
- Page 51 and 52: www.vtoolshop.com Component Test
- Page 53 and 54: Vehicle Info. Vehicle ID Number ►
- Page 55 and 56: www.vtoolshop.com Diagnostic Menu O
- Page 57 and 58: Main Menu OBDII/EOBD ►BMW Mercede
- Page 59 and 60: • For some vehicles, such as Hond
- Page 61 and 62: Erase Codes DTCs and Freeze Data wi
- Page 63 and 64: Mode Menu Read Codes Erase Codes
- Page 65 and 66: www.vtoolshop.com ECM/PCM RESET Ign
- Page 67: www.vtoolshop.com Mode Menu Read Co
www.vtoolshop.com<br />
2) Wait a few seconds while the scan tool is communicating with<br />
vehicle control module.<br />
3) View control module information on the screen.<br />
Vehicle Information<br />
Vehicle VIN:<br />
1GCEC14W5XZ214506<br />
Save<br />
Back<br />
4) To record the data, press Save button.<br />
6. Updating and Printing<br />
The scan tool allows user to update software and to print out<br />
recorded test data by connecting the device to a PC or laptop<br />
with the USB cable supplied.<br />
NOTE: For detailed updating and printing instructions, refer to<br />
HELP information on the included CD.<br />
To update software and print data, you need the following tools:<br />
MaxiDiag scan tool<br />
A computer with USB ports<br />
A USB cable<br />
1) Download update PC-Link and update files from our website<br />
www.auteltech.com<br />
2) Place included CD into CD-ROM.<br />
3) Follow onscreen instructions on your computer to install the<br />
PC-link.<br />
4) Launch PC-Link when installations completed.<br />
5) Connect the scan tool to computer with the USB cable supplied,<br />
and turn on the scan tool by pressing button.<br />
VTOOLSHOP<br />
67<br />
Tel:+86-0755-27823977<br />
Web:http://www.vtoolshop.com
Change language