Autel Maxiscan Jp701 Manual.pdf - Car Diagnostic Tool
Autel Maxiscan Jp701 Manual.pdf - Car Diagnostic Tool
Autel Maxiscan Jp701 Manual.pdf - Car Diagnostic Tool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.vtoolshop.com<br />
6) Turn off the ignition and turn it back on 10 seconds later as<br />
instructed; or press Cancel button to return to Mode Menu, if<br />
you decide not to erase the codes.<br />
7) When the codes are cleared, following screen shows:<br />
ECM/PCM RESET<br />
The ECM has been<br />
cleared.<br />
Press any key to con.<br />
• If the scan tool fails to reset the module, following screen<br />
shows:<br />
Communication<br />
TESTER NOT<br />
COMMUNICATING WITH<br />
CONTROL UNIT<br />
1. Make sure the ignition<br />
is switched ON.<br />
2. Check if the tester<br />
Back<br />
• Use UP/DOWN button to view additional troubleshooting tips,<br />
and press Back button to return.<br />
8) Press any key to return to Mode Menu.<br />
Readiness Test<br />
The Readiness Test function is available for engine system of<br />
VW/AUDI vehicles ONLY.<br />
1) Use UP/DOWN button to select Readiness Test from Mode<br />
Menu and press OK button.<br />
VTOOLSHOP<br />
65<br />
Tel:+86-0755-27823977<br />
Web:http://www.vtoolshop.com