Step-by-Step Configuration
Step-by-Step Configuration
Step-by-Step Configuration
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.5 DNS Forwarder <strong>Configuration</strong><br />
Notes:<br />
1. Do not use the DHCP server unless all desired scopes and reservations are made or<br />
unless you need to determine a client’s MAC address (see above).<br />
2. You can also use another DHCP server to detect settings of your network equipment<br />
automatically. Set the firewall computer’s internal IP address as the default gateway<br />
and DNS server in parameters for this range on the DHCP server.<br />
1.5 DNS Forwarder <strong>Configuration</strong><br />
Go to <strong>Configuration</strong> / DNS Forwarder to configure DNS servers to which DNS queries<br />
will be forwarded.<br />
• Select the Forward DNS queries to the specified DNS server(s) option and define IP<br />
addresses of DNS server(s) included in the Internet if the IP address of DNS server<br />
is identical with the IP address used <strong>by</strong> the WinRoute host (usually when a dial-up is<br />
used — refer to chapter 1.1). DNS servers of your ISP are recommended as they are<br />
easily available. Ask your ISP to supply you with appropriate IP addresses.<br />
• You can use the Forward DNS queries to the server automatically selected from DNS<br />
servers... option that is selected <strong>by</strong> the default when a leased line is used — — Win-<br />
Route will use one of the DNS servers set at the Internet interface.<br />
Use the Edit file... button to edit the hosts system file. In this dialog, specify all IP<br />
addresses and hostnames of hosts to which IP addresses have been assigned manually<br />
(including the firewall).<br />
13