pages 86-89 - Milodon

STREET STAINLESS VALVES
• ONE piece quality forgings
• Premium 21-4N exhaust material, high
grade stainless on intake
• 21-4N Exhaust valves will operate at 1600`F
• Large seat margin allowing many regrinds
• Smooth machined heads for higher flow
• Hard chromed stems for reduced wear
• Single keeper grooves to give greater
valve tip strength
• Priced at a level perfect for Sportsman
racing or the everyday rebuild
SMALL BLOCK CHEVY PART #
1.94” Intake . . . . . . . . . . . . . . . . . . . . . . . . . . 45600-8
1.50” Exhaust . . . . . . . . . . . . . . . . . . . . . . . . 45610-8
2.02” Intake . . . . . . . . . . . . . . . . . . . . . . . . . . 45605-8
1.60” Exhaust . . . . . . . . . . . . . . . . . . . . . . . . 45615-8
BIG BLOCK CHEVY PART #
2.065” Intake . . . . . . . . . . . . . . . . . . . . . . . . . 45620-8
1.725” Exhaust . . . . . . . . . . . . . . . . . . . . . . . 45630-8
2.19” Intake . . . . . . . . . . . . . . . . . . . . . . . . . . 45625-8
1.88” Exhaust . . . . . . . . . . . . . . . . . . . . . . . . 45635-8
SMALL BLOCK CHRYSLER PART#
2.02” Intake . . . . . . . . . . . . . . . . . . . . . . . . . . 45640-8
1.60” Exhaust . . . . . . . . . . . . . . . . . . . . . . . . 45645-8
BIG BLOCK CHRYSLER
PART#
2.08” Intake . . . . . . . . . . . . . . . . . . . . . . . . . . 45650-8
1.74” Exhaust . . . . . . . . . . . . . . . . . . . . . . . . 45655-8
2.14” Intake . . . . . . . . . . . . . . . . . . . . . . . . . . 45651-8
1.81” Exhaust . . . . . . . . . . . . . . . . . . . . . . . . 45656-8
**Milodn’s stainless steel valves are produced solely by our
manufacturing partner in Argentina for over 25 years**
FORD
PART#
302, 1.94” Intake . . . . . . . . . . . . . . . . . . . . . . . 45660-8
302, 1.60” Exhaust . . . . . . . . . . . . . . . . . . . . . 45665-8
351W, 1.84” Intake . . . . . . . . . . . . . . . . . . . . . 45662-8
351W, 1.54” Exhaust . . . . . . . . . . . . . . . . . . . 45667-8
351C, 2.19” Intake . . . . . . . . . . . . . . . . . . . . . 45670-8
351C, 1.71” Exhaust . . . . . . . . . . . . . . . . . . . 45675-8
429/460 (1970-72 SCJ), 2.245” Intake. . . 45680-8
429/460 (1968-72), 2.19” Intake . . . . . . . . 45681-8
429/460 (1968-72), 1.725” Exhaust. . . . . . 45685-8
OLDS
PART#
2.07” Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . 45690-8
1.71” Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . 45695-8
AUSTRALIAN HOLDEN
PART#
253-308, 1.94” Intake . . . . . . . . . . . . . . . . . . . 45760-8
253-308, 1.60” Exhaust . . . . . . . . . . . . . . . . . 45765-8
- Sold in master packs of eight.
- Order singles by using the Part
Number with a “-1”.
89