CP12170 12V 17Ah(20hr)

CP12170 12V 17Ah(20hr)
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte
is absorbed by separators and plates and thus immobilized. Should the battery be
accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the
gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is
completely sealed and is, therefore, maintenance-free, leak proof and usable in any position.
Battery Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
General Features
●
●
●
●
●
●
●
●
Absorbent Glass Mat (AGM) technology
for efficient gas recombination of up to
99% and freedom from electrolyte
maintenance or water adding.
Not restricted for air transport-complies
with IATA/ICAO Special Provision A67.
UL-recognized component.
Can be mounted in any orientation.
Computer designed lead, calcium tin alloy
grid for high power density.
Long service life, float or cyclic
applications.
Maintenance-free operation.
Low self discharge.
Dimensions and Weight
Length(mm / inch) 181 / 7.13
Width(mm / inch) 77 / 3.03
Height(mm / inch) 167 / 6.57
Total Height(mm / inch) 167 / 6.57
Approx. Weight(Kg / lbs) 5.7 / 12.6
Performance Characteristics
Nominal Voltage
12V
Number of cell 6
Design Life
3~5 years
Nominal Capacity 77 o F(25 o C)
20 hour rate (0.85A, 10.5V) 17Ah
10 hour rate (1.68A, 10.5V) 16.8Ah
5 hour rate (3.01A, 10.5V) 15.05Ah
1 hour rate (12A, 9.6V) 12Ah
Internal Resistance
Fully Charged battery 77 o F(25 o C)
16mOhms
Self-Discharge
3% of capacity declined per month at 20 o C(average)
Operating Temperature Range
Discharge
-20~60 o C
Charge
-10~60 o C
Storage
-20~60 o C
Max. Discharge Current 77 o F(25 o C)
225A(5s)
Short Circuit Current
850A
Charge Methods: Constant Voltage Charge 77 o F(25 o C)
Cycle use
14.5-14.9V
Maximum charging current 6.8A
Temperature compensation
-30mV/ o C
Standby use
13.6-13.8V
Temperature compensation
-20mV/ o C
Discharge Constant Current (Amperes at 77 o F25 o C)
End Point
Volts/Cell
5min 10min 15min 30min 1h 3h 5h 10h 20h
1.60V 67.0 45.3 36.0 20.0 12.0 4.58 3.19 1.78 0.91
1.65V 64.9 44.2 35.1 19.6 11.8 4.51 3.13 1.75 0.90
1.70V 62.6 43.1 34.2 19.1 11.6 4.43 3.07 1.72 0.89
1.75V 60.1 41.9 33.3 18.7 11.4 4.36 3.01 1.68 0.85
1.80V 57.4 40.8 32.4 18.2 11.2 4.28 2.93 1.65 0.84
Discharge Constant Power (Watts at 77 o F25 o C)
End Point
Volts/Cell
5min 10min 15min 30min 45min 1h 2h 3h 5h
1.60V 131 83.6 67.3 38.3 29.4 23.4 13.1 9.10 6.16
1.65V 127 82.2 66.2 37.8 29.1 23.2 13.0 9.01 6.09
1.70V 123 80.8 65.0 37.2 28.7 23.0 12.8 8.92 6.01
1.75V 118 79.3 63.9 36.7 28.4 22.7 12.7 8.83 5.94
1.80V 114 77.9 62.7 36.1 28.0 22.5 12.5 8.74 5.92
page1 of 2
www.vision-batt.com

THE INTERNATIONAL CERTIFICATION NETWORK
CP12170
12V17Ah
Voltage(v)
13.0
12.0
11.0
10.0
9.0
8.0
0
0
O
Discharge characteristic (25 C)
1 2 3 5 10 20 30 60 2 3 5 10 20 30
min
h
Discharge time
Charged
Volume
Current
Voltage
(%) (XCA) (V)
140
120
100
80
60
40
20
0
0.25
0.20
0.15
0.10
0.05
0
15.0
14.0
13.0
12.0
11.0
Constant voltage charging
o
characteristic (0.25CA,25 C)
Charged Volume
Charge Voltage
Charging Current
0 2 4 6 8 10 12 14 16 18 20
Charging time (hours)
Relationship between
charging voltage and temperature
110
Self-discharge characteristic
15.6
100
Voltage(V)
15.0
14.4
13.8
13.2
Cycle Use
Stand by Use
Capacity(%)
90
80
70
60
50
o
C
o
C
o
C
-10 0 10 20 30 40 50 60
o
Ambient temperature( C)
40
0 2 4 6 8 10 12 14 16 18 20
Storage time: months
120
Life characteristics of Standby use
120
Cycle service life in relation to
depth of discharge
100
100
Capacity(%)
80
60
40
Testing conditions:floating voltage:2.27 to 2.30V Cell
o o
ambient temperature: 25 C(77 F)
Capacity(%)
80
60
40
100% D.O.D. 50% D.O.D. 30% Depth of discharge
20
20
0 1 2 3
Life(year)
0 200 400 600 800 1000 1200 1400
Number of cycles(cycles)
10
Temperature effects on float life
120
Temperature effects on capacity
Life(years)
1
2.30V Cell
Capacity (%)
100
80
60
40
20
0.05C
0.1C
02C .
1.0C
2.0C
3.0C
0.1
10 20 30 40 50 60
o
Temperature( C)
0
-20 -10 0 10 20 30 40
o
50( C)
ISO9001:2000
MH25860
G4M19906-9202-E-16
Shenzhen Center Power Tech. Co., Ltd.
Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China
Tel: (+86-755) 8431 8088 Fax: (+86-755) 84318038
E-mail: sales@vision-batt.com
www.vision-batt.com
Copy Right Shenzhen Center Power Technology Co., Ltd (Edition 2003-9)
Page 2 of 2