sydney-city-centre-review-of-environmental-factors

Typical improvement (with
example)
Features
Typical construction activities associated with each stage of work (refer to
section 3.3)
Stage 3: Signage and traffic signal alterations and bus lane markings
Signage alterations (where required)
Traffic signpost alterations (where required)
Stage 4: Reinstatement, refurbishment and post works
Relocate or install stone, trachyte or concrete kerb/kerb ramp to new
alignment
Reinstall the kerb where required
Lane marking alterations
Localised patching and resurfacing (where required)
4: Turning restrictions and provisions
Left turn, right turn and through
lane restrictions/provisions
would be introduced at certain
intersections via line marking,
signage and/or signal
alterations.
Along Pitt Street on the
approach to the Hay Street
intersection (S3)
Stage 5: Site hand back
Temporary traffic management (removal) (where required)
Temporary footpath restriction/closure (removal) (where required)
Remove environmental controls (refer to Chapter 7)
Stage 1: Establishment works
Temporary traffic management (establishment) (where required)
Temporary footpath restriction/closure (establishment) (where required)
Install environmental controls (refer to Chapter 7)
Stage 3: Signage and traffic signal alterations and bus lane markings
Signage alterations (where required)
Traffic signpost alterations (where required)
Sydney City Centre Capacity Improvement 57
Review of Environmental Factors