sydney-city-centre-review-of-environmental-factors

No Impact Environmental safeguard Responsibility Timing
Traffic and transport
7 Construction traffic impacts
across the whole proposal
footprint
A construction traffic management plan (CTMP) would be
prepared in accordance with Traffic Control at Works Sites
(Roads and Maritime, 2011) and QA specification G10: Control
of Traffic (Roads and Maritime, 2011) as a sub-plan of the
CEMP. As a minimum, the plan would include the following
controls:
Minimise use of heavy vehicle on local roads
Restrict deliveries to outside of peak traffic periods where
possible
Ensure emergency vehicle access is maintained, including
consultation with emergency services
Manage short-term access restrictions during construction
Regulate traffic movements and minimise traffic switching
during construction through implemented traffic controls
Maintain continuous, safe and efficient traffic movement
Identify haulage routes and minimise impacts on local routes
Maintain local road and property access, including the use of
temporary turn-around bays
Maintain pedestrian and cyclist access throughout
Provide warning and advisory signage
Provide for local community consultation and notification of
local road network and traffic impacts
Identify and consider other construction works occurring in
the area at the same time to minimise additive traffic conflict
and congestion impacts.
Note: the plan would be reviewed by City of Sydney and CSTTC.
Construction
contractor
Pre-construction
Sydney City Centre Capacity Improvement 437
Review of Environmental Factors