Military Catalog - Kitcofo

Preparation Tools
tools
Fibersure Scribe NSN: 5110-01-419-4360 #0700-3750
This unique hand scribe is a KITCO innovation. Made of a proprietary carbide tungsten and
sharpened on both ends to a fine razor-sharp edge, the FiberSure TM Scribe’s blade has twice the life
of ordinary scribes. When the blade gets dull, simply remove and turn the blade around to continue
scribing with precision. The FiberSure TM Scribe also features a user-friendly handle and protective
screw-on cap. NAVSEA listed and approved for MIL-STD-2042B applications.
Featuring a
two edged blade.
Carbide Scribe #0700-3770
KITCO's wedge shaped Carbide Scribe is built into the handle and provides an industry standard
that has been used by professional fiber optic installers for years. NAVSEA listed and approved for
MIL-STD-2042B applications.
Safety Materials
UV Safety Glasses #0700-8810
These "one size fits all" safety glasses are designed for installer comfort as well as safety. Each ear
piece has a sliding handle to allow the installer to adjust the glasses for ultimate comfort and vision.
The perfectly clear lens with side shields protect the installers’ eyes from UV (Ultra Violet) light
and from flying glass debris. NAVSEA listed and approved for MIL-STD-2042B applications.
UV “Over Your Glasses” Glasses #0700-1570
These UV (Ultra Violet) blocking glasses serve the same function as the 0700-8810 glasses with
one exception; these amber colored glasses will fit over the installer’s regular eye glasses.
Micro Tip Tweezers #0700-8911
These extra sharp tweezers come in handy for untangling acrylate coated fibers in crowded communication
boxes. Tweezers may also be used to remove tiny shards of glass that may have been
inadvertently embedded in your skin.
Polishing Tools
Ceramic Termini Polishing Tool NSN: 5120-01-419-3142 #0701-4100
The 0701-4100 precision polishing tool is designed to polish the MIL-T-29504/14 (Ceramic Pin
Termini) and the MIL-T-29504/15 (Ceramic Socket Termini). Manufactured to hold the termini
perpendicular to the polishing paper, this fixture minimizes fiber undercut to allow for higher
mechanical performance. Specifications dictate that this fixture is to be used in all applications
involving MIL-STD-2042B, multimode and singlemode.
Polishing Tool NSN 5120-01-328-1227 #0700-4100
The 0700-4100 Rotary Mechanical Splice Polishing Tool will polish the glass ferrules to allow
placement into the alignment mechanism. This unique design will allow water from the polishing
procedure to be channeled away from the fixture, eliminating fixture "sticking" and allowing for
a smoother polishing motion.
The Profixture #0700-1750
The ProFixture is a must have for the professional fiber optic installer. Made of machine hardened
tungsten, the ProFixture will not grind away during polishing. Less expensive fixtures
leave a residue (actual fixture material) that can scratch and contaminate the fiber endface which
can cause increased dB loss and less reliable performance. The ProFixture pays for itself by
eliminating costly repairs due to faulty terminations and is designed to be used with ST, SC, and
FC connectors and most 2.5mm ferruled connectors. The center hole diameter is held to 2 tenthousandths
of an inch tolerance to maintain the ferrule perpendicular to the polishing surface.
The ProFixture is listed on NAVSEA Drawing 6872811 as an approved product for MIL-C-
83522/16 polishing and SC COTS applications.
Fixture
Wear
ProFixture
Stainless Steel
26
To see how KITCO can help you, call 1-888-548-2636 or visit www.kitcofo.com