Axman Keyboard Stand 54029

Axman Keyboard Stand 54029
Working and security instructions

Axman Keyboard Stand 54029
List of parts
Keyboard stand
Assembly instruction
Assembly instruction
- Remove the keyboard stand from its packaging. This is your starting position (pic 1)
- Loosen the handle in the middle by flapping it up (pic 2)
- Now pull the support arms into an “X“. The further you pull them apart, the shorter will be the height.
(pic 3)
- When you have determined the appropriate height, fix it by flapping the handle down (pic 4)
- Make sure that when closing the handle the cogs of the gear intertwine and are not tooth upon tooth.
(pics 5 and 6)
- With the help of the floor balance adjuster (pic 7) you can level minor irregularities of the floor. Simply turn
the floor balance adjuster. Thanks to its rising wall thickness you can provide the keyboard stand with a
safe standing.
1 2 3

4 5 6
7
<
<
General notice
- max. loading capacity 30Kg
- Do not climb onto or lean against the keyboard stand.
- Please always look for a suitable surface.
- Pay attention when assembling and disassembling since danger of getting pinched.
- Use an additional support for delicate parquet floors.
Care instructions
Wipe the keyboard stand occasionally with a damp cloth.
Otherwise the keyboard stand is maintenance free.
Disposal
Regarding correct disposal please observe the statutory provisions that apply in your country.
3 years guarantee
Product characteristics may vary.
If you have any questions, please contact the producer and service:
Vision Music GmbH
Hinter der Bind 21
78224 Singen
Tel.: +49 (0) 7731/ 790 118 Fax: +49 (0) 7731/ 790 123
www.visionmusic.de, info@visionmusic.de

Vision Music GmbH
Hinter der Bind 21
78224 Singen
Telefon +49 (0) 7731/ 790 118, Fax +49 (0) 7731/ 790 123
info@visionmusic.de, www.visionmusic.de 05.2010