Cisco EnergyWise IOS Configuration Guide - Ipland
Cisco EnergyWise IOS Configuration Guide - Ipland
Cisco EnergyWise IOS Configuration Guide - Ipland
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
debug energywise<br />
Chapter 3<br />
<strong>EnergyWise</strong> CLI Commands<br />
debug energywise<br />
Use the debug energywise privileged EXEC command to debug <strong>EnergyWise</strong> endpoints and managment<br />
stations.<br />
debug energywise {debug | endpoint | ha | management | packet | trace}<br />
Syntax Description<br />
debug<br />
endpoint<br />
ha<br />
management<br />
packet<br />
trace<br />
Displays errors such as invalid sequence numbers and communication errors on the<br />
domain.<br />
Displays information about <strong>EnergyWise</strong> endpoints running a client or agent and<br />
helps detect mismatched domain names, secrets, and sequence numbers of connected<br />
endpoints.<br />
Displays POWERNET high availability information.<br />
Displays information about authentication failures and <strong>EnergyWise</strong> management<br />
stations running power management applications.<br />
Displays packet trace information.<br />
Displays trace messages.<br />
Command Default<br />
<strong>EnergyWise</strong> debugging is disabled.<br />
Command Modes<br />
Privileged EXEC<br />
Command History<br />
Release<br />
12.2(33)SXI4<br />
Modification<br />
This command was introduced on the Catalyst 6500 switches. See the <strong>Cisco</strong> <strong>IOS</strong><br />
Release Notes for <strong>Cisco</strong> <strong>EnergyWise</strong>, <strong>EnergyWise</strong> Phase 2 for the specific devices.<br />
12.2(53)SE1 This command was introduced on the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960<br />
switches.<br />
12.2(53)SE2 This command was introduced on the Catalyst 3750-X and 3560-X switches.<br />
12.2(54)SG This command was introduced on the Catalyst 4500 switches.<br />
12.2(58)SE The ha, packet, and trace keywords were added to the Catalyst 3750-X, 3750-E,<br />
3750, 3560-X, 3560-E, 3560, and 2960 switches.<br />
15.0(1)M2 This command was introduced on <strong>Cisco</strong> Integrated Service Routers Generation 2<br />
(ISR G2), including <strong>Cisco</strong> 3900, 2900, and 1900 ISRs.<br />
Usage <strong>Guide</strong>lines Caution Because debugging output is assigned high priority in the CPU process, it can render the<br />
system unusable. For this reason, use the debug commands only to troubleshoot specific<br />
problems or during troubleshooting sessions with <strong>Cisco</strong> technical support staff. It is best to<br />
use the debug commands during periods of lower network traffic and fewer users. Debugging<br />
during these periods decreases the likelihood that increased debug command processing<br />
overhead will affect system use.<br />
3-4<br />
<strong>Cisco</strong> <strong>EnergyWise</strong> <strong>Configuration</strong> <strong>Guide</strong><br />
OL-19806-04