Download the 2013 ECEDHA Annual Conference Program Guide

Download the 2013 ECEDHA Annual Conference Program Guide Download the 2013 ECEDHA Annual Conference Program Guide

23.11.2014 Views

2013 ECEDHA Annual Conference and ECExpo Orlando, Florida . March 22–26, 2013 Online Education Workshop Schedule FRIDAY | MARCH 22 This workshop will bring together ECE faculty with experts in social media and online education from academia, industry, and government agencies to accelerate the integration of these technologies into ECE education and enable effective online delivery of ECE courses. Separate registration is required. 8:00 am – 9:00 am Continental Breakfast 9:00 am – 9:15 am Welcome Remarks INTRODUCTION: John R. Janowiak, Executive Director, ECEDHA WORKSHOP CHAIR: Daniel Stancil, Alcoa Professor and Head, Department of Electrical and Computer Engineering, North Carolina State University WORKSHOP ORGANIZERS: Tsuhan Chen, David E. Burr Professor of Engineering, Director of Electrical and Computer Engineering, Cornell University; Vice President, ECEDHA Mohamed Chouikha, Professor and Chair, Department of Electrical and Computer Engineering, Howard University Pritpal Singh, Professor and Chair, Department of Electrical and Computer Engineering, Villanova University 9:15 am – 10:00 am Opening Keynote Tom Cavanagh, Associate Vice President, Distributed Learning University of Central Florida 10:00 am – 10:15 am Break 10:15 am – 11:45 am Panel Discussion – Enabling Technologies MODERATOR: Daniel Stancil, Alcoa Professor and Head, Department of Electrical and Computer Engineering, North Carolina State University Tom Cavanagh, Associate Vice President, Distributed Learning University of Central Florida Erin Gabrysh, Associate Director of Instructional Design, EmbanetCompass 9:00 AM – 5:00 PM | LOCATION: GREAT HALL EAST Tom Gaudette, Principal Academic Evangelist MathWorks John Risley, Chief Executive Officer WebAssign John Schneider, Director of Educational Initiatives Digilent 12 noon – 1:30 pm Keynote Luncheon Online Education Workshop Schedule Bernd Girod, Professor and Senior Associate Dean School of Engineering Stanford University 1:30 pm – 3:00 pm Panel Discussion – Course Delivery Experiences 3:00 pm – 3:15 pm Break MODERATOR: Mohammed Chouikha, Professor and Chair, Department of Electrical and Computer Engineering Howard University 3:15 pm – 4:45 pm Panel Discussion – Accreditation and Other Challenges 4:45 pm – 5:00 pm Workshop Wrap-Up John Booske, Chair, Electrical and Computer Engineering Department Director, Wisconsin Collaboratory for Enhanced Learning University of Wisconsin MODERATOR: Pritpal Singh, Professor and Chair, Department of Electrical and Computer Engineering Villanova University James DuPont, Managing Director EmbanetCompass Linda Krute, Director of Distance Education Programs, College of Engineering – Engineering Online North Carolina State University 6:30 pm – 7:30 pm ECEDHA Welcome Reception for all attendees and guests Kathleen Meehan, Associate Professor, Department of Electrical and Computer Engineering Virginia Tech Don Millard, Program Director National Science Foundation Xiaofang “Maggie” Wang, Assistant Professor, Electrical and Computer Engineering Villanova University John Schuring, Professor, Civil and Environmental Engineering New Jersey Institute of Technology Craig Scott, Associate Professor, Electrical and Computer Engineering Morgan State University March 22–26, 2013 26 Orlando, Florida 2013 Annual Conference and ECExpo www.ecedha.org 27

ECE Spotlight Schedule 2013 ECEDHA Annual Conference and ECExpo SUNDAY | MARCH 24 LOCATION: GREAT HALL EAST/WEST SPOTLIGHT PROGRAM SPONSOR: Join us Sunday morning for an opportunity to learn about the ECE Spotlight companies whose products and services are key to enhancing the experience of your students and graduates. Spotlight sessions present an ideal environment for meeting these industry leaders, and are particularly ideal for further one-on-one interaction during the Sunday evening ECExpo and Monday ECExpo program. 8:00 am – 8:30 am ECE Spotlight Continental Breakfast 8:30 am – 9:45 am Quanser: Can Engineering Theory Ever be Fun? Tom Lee, Ph.D, Chief Education Officer, Quanser Digilent: Makers are Learners Clint Cole, President, Digilent Inc.; Instructor, Washington State University Agilent: Producing Industry-Ready Engineers John Kikuchi, Agilent EEsof EDA University Program Manager, Agilent Technologies MathWorks: 10 Ways to Accelerate Education with MATLAB and Simulink Todd Atkins, Education Technical Marketing, MathWorks 10:00 am – 10:45 am National Instruments: Answering the Grand Engineering Challenges: Inspire Students in Engineering Mark Walters, Academic Marketing Manager, National Instruments Freescale: Make It Awesome: Easy, Embedded, Education John McLellan, Freescale University Programs – North America, Freescale Analog Devices: Tinkering 101: Inspiring Students With Hands-on Learning Tools and Techniques Kathleen Meehan, Associate Professor, Bradley Department of Electrical and Computer Engineering, Virginia Tech Sam Fuller, Vice President, Research and Development and Chief Technology Officer, Analog Devices 11:00 am – 11:45 am Mentor Graphics: Teaching Using State of the Art Design Tools Ian Burgess, Higher Education Program Development Manager, Mentor Graphics Corporation Mouser: Sourcing Solutions for Today’s Electronic Engineering Programs Coby Kleinjan, Director of Special Accounts, Mouser Electronics Texas Instruments: Bring Project Based Learning—Anywhere: TI Educational Hardware Larissa Swanland, University Manager Texas Instruments March 22–26, 2013 28 Orlando, Florida

<strong>2013</strong> <strong>ECEDHA</strong> <strong>Annual</strong> <strong>Conference</strong> and ECExpo Orlando, Florida . March 22–26, <strong>2013</strong><br />

Online Education Workshop Schedule<br />

FRIDAY | MARCH 22<br />

This workshop will bring toge<strong>the</strong>r ECE faculty with experts in social media and online education<br />

from academia, industry, and government agencies to accelerate <strong>the</strong> integration of <strong>the</strong>se<br />

technologies into ECE education and enable effective online delivery of ECE courses.<br />

Separate registration is required.<br />

8:00 am – 9:00 am Continental Breakfast<br />

9:00 am – 9:15 am Welcome Remarks<br />

INTRODUCTION:<br />

John R. Janowiak, Executive Director, <strong>ECEDHA</strong><br />

WORKSHOP CHAIR:<br />

Daniel Stancil, Alcoa Professor and Head, Department of Electrical and Computer<br />

Engineering, North Carolina State University<br />

WORKSHOP ORGANIZERS:<br />

Tsuhan Chen, David E. Burr Professor of Engineering, Director of Electrical and<br />

Computer Engineering, Cornell University; Vice President, <strong>ECEDHA</strong><br />

Mohamed Chouikha, Professor and Chair, Department of Electrical and Computer<br />

Engineering, Howard University<br />

Pritpal Singh, Professor and Chair, Department of Electrical and Computer Engineering,<br />

Villanova University<br />

9:15 am – 10:00 am Opening Keynote<br />

Tom Cavanagh,<br />

Associate Vice President, Distributed Learning<br />

University of Central Florida<br />

10:00 am – 10:15 am Break<br />

10:15 am – 11:45 am Panel Discussion – Enabling Technologies<br />

MODERATOR:<br />

Daniel Stancil, Alcoa Professor and Head,<br />

Department of Electrical and Computer<br />

Engineering, North Carolina State University<br />

Tom Cavanagh,<br />

Associate Vice President,<br />

Distributed Learning<br />

University of Central Florida<br />

Erin Gabrysh,<br />

Associate Director of<br />

Instructional Design,<br />

EmbanetCompass<br />

9:00 AM – 5:00 PM | LOCATION: GREAT HALL EAST<br />

Tom Gaudette,<br />

Principal Academic<br />

Evangelist<br />

MathWorks<br />

John Risley,<br />

Chief Executive<br />

Officer<br />

WebAssign<br />

John Schneider,<br />

Director of<br />

Educational<br />

Initiatives<br />

Digilent<br />

12 noon – 1:30 pm Keynote Luncheon<br />

Online Education Workshop Schedule<br />

Bernd Girod, Professor and Senior Associate Dean<br />

School of Engineering<br />

Stanford University<br />

1:30 pm – 3:00 pm Panel Discussion – Course Delivery Experiences<br />

3:00 pm – 3:15 pm Break<br />

MODERATOR:<br />

Mohammed Chouikha,<br />

Professor and Chair, Department of<br />

Electrical and Computer Engineering<br />

Howard University<br />

3:15 pm – 4:45 pm Panel Discussion – Accreditation and O<strong>the</strong>r Challenges<br />

4:45 pm – 5:00 pm Workshop Wrap-Up<br />

John Booske,<br />

Chair, Electrical and Computer<br />

Engineering Department<br />

Director, Wisconsin Collaboratory<br />

for Enhanced Learning<br />

University of Wisconsin<br />

MODERATOR:<br />

Pritpal Singh, Professor and Chair, Department of<br />

Electrical and Computer Engineering<br />

Villanova University<br />

James DuPont,<br />

Managing Director<br />

EmbanetCompass<br />

Linda Krute,<br />

Director of Distance Education <strong>Program</strong>s,<br />

College of Engineering – Engineering Online<br />

North Carolina State University<br />

6:30 pm – 7:30 pm <strong>ECEDHA</strong> Welcome Reception for all attendees and guests<br />

Kathleen Meehan,<br />

Associate Professor,<br />

Department of Electrical<br />

and Computer Engineering<br />

Virginia Tech<br />

Don Millard,<br />

<strong>Program</strong> Director<br />

National Science Foundation<br />

Xiaofang “Maggie” Wang,<br />

Assistant Professor, Electrical<br />

and Computer Engineering<br />

Villanova University<br />

John Schuring,<br />

Professor, Civil and<br />

Environmental Engineering<br />

New Jersey Institute of Technology<br />

Craig Scott,<br />

Associate Professor, Electrical<br />

and Computer Engineering<br />

Morgan State University<br />

March 22–26, <strong>2013</strong><br />

26<br />

Orlando, Florida<br />

<strong>2013</strong> <strong>Annual</strong> <strong>Conference</strong> and ECExpo www.ecedha.org<br />

27

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!