Crown Low Power Transmitters - Crown Broadcast
Crown Low Power Transmitters - Crown Broadcast
Crown Low Power Transmitters - Crown Broadcast
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SCA IN COMPOSITE IN MONITOR<br />
RIGHT<br />
LEFT/MONO<br />
R<br />
L<br />
REMOTE I/O<br />
1<br />
2 3<br />
Composite In<br />
BNC Connector<br />
CIRCUIT<br />
BREAKER<br />
OFF<br />
+<br />
–<br />
36 VDC<br />
B<br />
A<br />
T<br />
T<br />
E<br />
R<br />
Y<br />
Audio Monitor Jacks<br />
Illustration 2–15 Composite In and Audio Monitor Connections<br />
2.9 Audio Monitor Connections<br />
Processed, de-emphasized samples of the left and right audio inputs to the stereo<br />
generator are available at the Monitor jacks on the rear panel. The signals are<br />
suitable for feeding a studio monitor and for doing audio testing. De-emphasis is<br />
normally set for 75 µsec; set to 50 µsec by moving jumpers, JP203 and JP204, on<br />
the Stereo Generator board.<br />
2.10 Pre-emphasis Selection<br />
Select the pre-emphasis curve (75 µsec, 50 µsec, 25 µsec, or Flat) by jumpering the<br />
appropriate pins of header JP1 on the audio processor board. If you change the preemphasis,<br />
change the de-emphasis jumpers JP203 and JP204 on the Stereo<br />
Generator board to match.<br />
Installation<br />
2–13