Crown Low Power Transmitters - Crown Broadcast
Crown Low Power Transmitters - Crown Broadcast
Crown Low Power Transmitters - Crown Broadcast
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.5 RF Connections<br />
Connect the RF load, an antenna or the input of an external power amplifier, to the<br />
type-N, RF output connector on the rear panel. VSWR should be 1.5:1 or better.<br />
WARNING<br />
Severe shock hazard!<br />
Do not touch the inner<br />
portion of the RF<br />
output connector<br />
when transmitter<br />
power is on.<br />
The RF monitor is intended primarily for a modulation monitor connection.<br />
Information gained through this connection can supplement that which is available<br />
on the transmitter front panel displays.<br />
If your transmitter is equipped with the receiver option, connect the incoming RF<br />
to the RF IN connector.<br />
RF Output<br />
Connector<br />
RF Input Connector<br />
(receiver option only)<br />
RF Output<br />
Monitor<br />
120Vac<br />
Illustration 2–12 RF Connections<br />
2–10 FM30/FM100/FM250 User's Manual
Change language