Crown Low Power Transmitters - Crown Broadcast
Crown Low Power Transmitters - Crown Broadcast
Crown Low Power Transmitters - Crown Broadcast
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Locate the RF Exciter board and identify the frequency selector switches<br />
which will be used to change the setting. See Illustrations 2–6 and 2–7.<br />
Modulation<br />
Trim-pot<br />
Frequency Selection<br />
Rotary Switches<br />
RF Exciter<br />
®<br />
FM250<br />
Illustration 2–6 Top Cover Removed<br />
OPTIONAL<br />
MEGAHERTZ .1 .01<br />
Illustration 2–7 RF Exciter Board (Frequency Selector Switches)<br />
3. Use small flat blade screwdriver or another suitable device to rotate the<br />
switches to the desired setting. (The selected number will appear directly<br />
above the white indicator dot on each switch.) See examples of selected<br />
frequencies in the illustration below.<br />
= 88.1 MHz<br />
= 107.9 MHz<br />
Illustration 2–8 Two Sample Frequency Selections<br />
2–6 FM30/FM100/FM250 User's Manual