Download full text - ELSA - Europa

More documents

Recommendations

Info

The velocity at 200 ms is presented below: The fluid pressure at 130 ms is shown below: 10
PROBLEM: A rigid tank with rigid or deformable bottom and partially filled with a liquid is subjected to gravity and accelerated by a harmonic excitation in the horizontal direction applied to the base. MESH: The fluid is meshed by CAR1 elements, the tank by COQU elements. The calculation is plane strain (DPLA) and is declared of the NAVI type. In this way, incompressibility is automatically enforced for all CAR1 elements that are associated with a LIQU material (the fluid mesh, in this case). MATERIALS: The fluid is modelled by the LIQU material (density 1000), while the tank uses a linear elastic material (LINE). BOUNDARY CONDITIONS: The motion of the tank base is imposed in the horizontal direction. FSA fluidstructure interaction is used along the whole fluid-structure interface. SLIP sliding conditions are prescribed along the free fluid surface. LOADING: An imposed horizontal displacement with a harmonic shape (9.3 mm aplitude) is imposed at the tank base. This imposed displacement starts at t = 1 s. Gravity acts on the system starting at t = 0. The initial 1 s of the calculation is used to let the code 11
Page 1 and 2:
European Laboratory for Structural
Page 3 and 4:
Proceedings of a Course on: Numeric
Page 5:
Programme of the Course 1. Introduc
Page 10 and 11:
Credits & Acknowledgments • Struc
Page 12 and 13:
Introductory Example (4) 7 Applicat
Page 14 and 15:
x Computational Framework • Gover
Page 16 and 17:
n+ 1 n ∆t n n+ 1 u = u + ( u + u
Page 18 and 19:
Scheme start-up and marching (2)
Page 20 and 21:
Stress Update • To solve the equi
Page 22 and 23:
Geometric non-linearities (3) Set u
Page 24 and 25:
Essential Boundary Conditions Essen
Page 26 and 27:
Exercise 0 - Ideal ballistics • M
Page 28 and 29:
Exercise 0 - Ideal ballistics (5)
Page 30 and 31:
Exercise 1 - Suspended mass (3) •
Page 32 and 33:
Exercise 1 - Suspended mass (7) •
Page 34 and 35:
Exercise 2 - Wave propagation (4)
Page 36 and 37:
Exercise 3 - Impact on Cooling Towe
Page 41 and 42:
TITLE: PMAT04: motion of projectile
Page 43 and 44:
sinon; tra2 = tra2 et ele; finsi; f
Page 45 and 46:
Some results: horizontal and vertic
Page 47:
PMAT01E This test is similar to PMA
Page 50 and 51:
Hence: 11 −8 ES 2× 10 ⋅ 2.5×
Page 52 and 53:
The stress history is: Note that th
Page 54 and 55:
Analytical TEST11 Same as TEST01 bu
Page 56 and 57:
Comparison of natural vs. engineeri
Page 58 and 59:
The total external forces at the tw
Page 61 and 62:
TEST13 Same as TEST01 but uses a 10
Page 63 and 64:
The mass returns at the initial pos
Page 65 and 66:
TEST22 To verify the independence o
Page 67 and 68:
Linear dynamic analysis Consider th
Page 69 and 70:
• The two waves f and g propagate
Page 71 and 72:
Analytical solution For the bar imp
Page 73 and 74:
Note that we have also put the Pois
Page 75 and 76:
BARI08 We study the effect of the t
Page 77 and 78:
ENDPLAY *==========================
Page 79:
BARI10 Same as BARI09 but compares
Page 82 and 83:
The system is initially at rest, an
Page 84 and 85:
CAST MESH TRID NONL LAGR $ $ Dimens
Page 86:
Final deformation (with superposed
Page 90 and 91:
Detailed Contents • Modeling the
Page 92 and 93:
Modeling the fluid domain • The f
Page 94 and 95:
Euler equations (3) • For a compr
Page 96 and 97:
Time integration Each time incremen
Page 98 and 99:
Time integration (5) 10. Account fo
Page 100 and 101:
Euler Equations (FV) • They are w
Page 102 and 103:
Mesh rezoning - motivations • Rez
Page 104 and 105:
Giuliani’s automatic rezoning •
Page 106 and 107:
• Analytical solution (self-simil
Page 108 and 109:
Shock tube (6) • Influence of pse
Page 110 and 111:
Exercise 2 - Explosion in air-fille
Page 112 and 113:
Exercise 3 - Bubble expansion in a
Page 114 and 115:
Exercise 4 - External blast on two
Page 119 and 120:
Geometric data: The calculation is
Page 121 and 122:
SHOC01 Eulerian, “average” pseu
Page 123 and 124:
COUR 7 'ro_a' ECRO COMP 2 ELEM LECT
Page 125 and 126:
Analytical Conclusion: the pseudo-v
Page 127 and 128:
SHOC13 Eulerian, very low pseudo-vi
Page 129 and 130:
Analytical General conclusions: •
Page 131 and 132:
The inverse path is not so straight
Page 133 and 134:
The input files (mesh generation by
Page 135 and 136:
Geometric data: The calculation is
Page 137 and 138:
COUR 1 'dx_4' DEPL COMP 1 NOEU LECT
Page 139 and 140:
TANK02 Eulerian solution: the whole
Page 141:
The final pressure distribution is:
Page 144 and 145:
TUBE06 Lagrangian solution: the who
Page 146 and 147:
And the final velocity distribution
Page 148 and 149:
The computed displacements are: To
Page 150 and 151:
43 30 30 43 44 31 31 44 45 32 32 45
Page 153 and 154:
Geometric data: External blast in a
Page 155 and 156:
abs4 = dall (p4 d 28 p4u) (p4u d 40
Page 157 and 158:
Geometric data: Internal blast in a
Page 159 and 160:
air = air1 ET air2 ET air3 ET air4
Page 161 and 162:
COURBE 8 'P e_p12' ECROU COMP 1 lec
Page 163 and 164:
3D axisymmetric simulation: JWLS3G
Page 165 and 166:
point lect 1 term elem lect 1 term
Page 169 and 170:
Universitat Politècnica de Catalun
Page 171 and 172:
• Motivation Detailed Contents
Page 173 and 174:
FSI Classification FSI for compress
Page 175 and 176:
The 2-D plane case (2) Use geometri
Page 177 and 178:
Classification of FSI algorithms
Page 179 and 180:
The FSA algorithm (4) The case of s
Page 181 and 182:
The FSCR algorithm Combination of F
Page 183 and 184:
Application to Finite Volumes (3) 2
Page 185 and 186:
Exercise 2 - Explosions in simple d
Page 187 and 188:
Exercise/Example 3 - Wave propagati
Page 189 and 190:
Exercise/Example 4 - CONT problem (
Page 191 and 192:
Exercise/Example 5 - Explosion in a
Page 193 and 194:
Exercise/Example 6 : Woodward-Colel
Page 195 and 196:
Geometry: Exercise/Example 8 Steam
Page 197 and 198:
Exercise/Example 9 Explosion in Sec
Page 199 and 200:
Exercise/Example 9 Explosion in Sec
Page 201 and 202:
Boundary Condition Elements: CLxx (
Page 203 and 204:
Exercise/Example 11 - Perforated Pl
Page 205 and 206:
Exercise/Example 12 - Sloshing (3)
Page 207 and 208:
Page 209:
Page 214 and 215:
DIME PT3L 23 PT2L 143 FL24 145 ED01
Page 216 and 217:
The final pressure field in the flu
Page 218 and 219:
ALE solution with FSA: it is not po
Page 220 and 221:
120 119 138 139 121 120 139 140 122
Page 222 and 223:
and the final velocity field: The s
Page 224 and 225:
The final velocities: The final liq
Page 226 and 227:
*----------------------------------
Page 228 and 229:
TWIS07 We study the phenomenon by a
Page 231 and 232:
This is a well-known reactor safety
Page 233 and 234:
1.53330E+00 1.32310E+01 1.15000E+00
Page 235 and 236:
200 199 239 240 200 200 200 240 241
Page 237 and 238: *----------------------------------
Page 239 and 240: The final fluid pressures: CONT02 T
Page 241 and 242: The final fluid velocities: The fin
Page 243 and 244: This example consists in a long 3D
Page 245 and 246: GEOM FL38 flui Q4GS stru TERM COMP
Page 248 and 249: Detail of first diaphragm: Detail o
Page 250 and 251: BOUNDARY CONDITIONS: The step is en
Page 252 and 253: The EUROPLEXUS input file reads: WO
Page 254 and 255: WOCO3D The mesh generation file (K2
Page 256 and 257: * RESU ALIC GARD PSCR * SORT GRAP *
Page 258 and 259: PT3L 16389 PT6L 504 NBLE 16389 NALE
Page 260 and 261: Final pressure distribution: 4
Page 262 and 263: BOUNDARY CONDITIONS: The vessel is
Page 264 and 265: as01=daller c1 c2 c3 c4 plan; * c1=
Page 266 and 267: *trac oeil cach fluidstr; *opti don
Page 268 and 269: cam3=cam31 et cam32; camb=cam1 et c
Page 270 and 271: log 1 dtml REZO GAM0 0.5 FLMP EPS1
Page 272 and 273: Final structure deformation: Final
Page 274 and 275: LOADING: The event is initiated by
Page 276 and 277: FLUT RO .242777373 EINT 6.865E5 GAM
Page 278 and 279: Final structure velocities: 6
Page 280 and 281: RESULTS: A paper by Bermudez and Ro
Page 282 and 283: The applied displacement and the co
Page 284 and 285: PROBLEM: A rigid tank with a deform
Page 286: The EUROPLEXUS input file reads: GR
Page 291 and 292: COMP EPAI 0.005 LECT 101 102 103 10
Page 293 and 294: Numerical Solution (flexible bottom
Page 295 and 296: ! VARI DEPL VITE ECRO ! fich alic t
Page 297 and 298: The final pressures in the rigid an
Page 299 and 300: LOADING: A constant gravity in the
Page 301 and 302: Some results: intermediate and fina
Page 305 and 306: Universitat Politècnica de Catalun
Page 307 and 308: ALE description of structures (2)
Page 309 and 310: Example 1 - Taylor bar impact (3) B
Page 311 and 312: Example 3 - Coining (3) Influence o
Page 313 and 314: • Tentative classification: Non-c
Page 315 and 316: Example 4 - Explosion in a 2D box (
Page 317 and 318: Example 6 - LOCA in the HDR (2) A -
Page 319 and 320: Examples of “Slow” Transient Co
Page 321 and 322: Examples of Fast Transient Impact
Page 323 and 324: Components of Contact-Impact Method
Page 325 and 326: Shortcomings • Slender or distort
Page 327 and 328: Example - Bar impact • (See Part
Page 329 and 330: Example 7b - Indentation (2) • 2D
Page 331 and 332: Example 7b - Indentation (6) • 3D
Page 333 and 334: Smoothed Particles Hydrodynamics (C
Page 335 and 336: SPH Formulation (2) • Basic idea:
Page 337 and 338:
SPH impact [Courtesy of Samtech/Son
Page 339 and 340:
PRGL01: Example 8 - SPH impacts (Co
Page 341 and 342:
Spectral Elements • Motivation: l
Page 343 and 344:
Spectral Elements (5) Convergence p
Page 345 and 346:
Example 9 - Closed FE/SE interface
Page 347 and 348:
Example 11 - Cylindrical valley 85
Page 349 and 350:
Performance Optimization • All ex
Page 351 and 352:
Time Step Partitioning (4) • Intr
Page 353 and 354:
Time Step Partitioning (8) • Acti
Page 355 and 356:
Treatment of links in partitioning
Page 357 and 358:
Example 12a - Taylor bar impact rev
Page 359 and 360:
Coupling at the Interfaces • Two
Page 361 and 362:
Coupling at the Interfaces (5) MU T
Page 363 and 364:
Coupling at the Interfaces (9) Time
Page 365 and 366:
Multiple scales in time (3) • Exp
Page 367 and 368:
Multiple scales in space • Furthe
Page 369 and 370:
Multiple scales in frequency • So
Page 371 and 372:
Example: power plant 133 Example: p
Page 373 and 374:
Example: aircraft (3) Thanks to CPU
Page 375 and 376:
Example 14 - Domains in 3D • Thic
Page 377:
Example 15 - Bar Impact Revisited (
Page 382 and 383:
* mesh=stru et symax et viti et lil
Page 384 and 385:
The displacements are: 4
Page 386 and 387:
c2=p1 d 8 p2; c3=p2 d 20 p3; c4=p3
Page 388 and 389:
The resulting final deformed mesh w
Page 390 and 391:
TERM *-----------------------------
Page 393 and 394:
Geometric data and materials: The b
Page 395 and 396:
BET0 1 KINT 0 AHGF 0 CL 0.5 CQ 2.56
Page 397 and 398:
INFS02 We use a twice finer fluid m
Page 399 and 400:
FREQ 1 GOTR LOOP 60 OFFS FICH AVI C
Page 401 and 402:
Problem description: This example i
Page 403 and 404:
*----------------------------------
Page 405:
The final velocities: The final for
Page 408 and 409:
*----------------------------------
Page 410 and 411:
The final deformed mesh is: The fin
Page 412 and 413:
pc = 4.5 -1 -1.5; pd = 5.5 -1 -1.5;
Page 414 and 415:
The initial configuration (with par
Page 417 and 418:
TITLE: Indentation problem. PROBLEM
Page 419 and 420:
cp = p0 d 10 p13; elim tol (piece e
Page 421 and 422:
The final velocities: The final dis
Page 423 and 424:
The input file is: INDE - 13 ECHO !
Page 425 and 426:
The final displacement norm: The fi
Page 427 and 428:
elim tol (piece et cp); c_p = piece
Page 429 and 430:
The final deformed shape is: 13
Page 431 and 432:
Numerical Solutions PRGL01 Simplifi
Page 433 and 434:
FOV 2.48819E+01 SCEN GEOM NAVI FREE
Page 435 and 436:
ROMA01 Final plastic streen in the
Page 437 and 438:
SONA01 7
Page 439:
Final density in the projectile: Fi
Page 442 and 443:
opti echo 0; opti donn 'D:\Users\Fo
Page 444 and 445:
* opti dime 2 elem qua4; p0 = 0 0;
Page 446 and 447:
The final X-displacement in the hyb
Page 448 and 449:
* opti dime 2 elem qua4; opti titr
Page 450 and 451:
VALLPS This calculation assumes a p
Page 452 and 453:
The receiver signal in the coupled
Page 455 and 456:
Problem description: This example r
Page 457 and 458:
CALC TINI 0. TFIN 40.E-3 *=========
Page 459 and 460:
REPETER BCL2 (2); REPETER BCL3 (2);
Page 461 and 462:
*----------------------------------
Page 463 and 464:
The tip displacement in the referen
Page 465 and 466:
Page 467 and 468:
LOG 1 DPSD *-----------------------
Page 469 and 470:
TRAC CACH OEIL2 ZONE1; TRAC CACH OE
Page 471 and 472:
The tip displacement in the referen
Page 473 and 474:
Page 475 and 476:
$ INIT VITE 2 -227. LECT VITI TERM
Page 477 and 478:
* AXTE 1000.0 'Time [ms]' * COUR 1
Page 479 and 480:
sq41=sq41 coul 'TURQ'; sq42=sq42 co
Page 481 and 482:
The displacements in the case with
Page 485 and 486:
European Commission DG Joint Resear
show all

Download full text - ELSA - Europa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?