Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1 PREPARATION<br />
SUSPENSION POINTS<br />
• Suspension points should be determined<br />
before installing the <strong>Axiom</strong> KE <strong>Canopy</strong>.<br />
• A suspension point matrix for the different<br />
<strong>Axiom</strong> KE modules is included in the cartons.<br />
• The suspension points matrix is also available<br />
on request.<br />
Please contact your local ITS department.<br />
AXIOM KE CANOPY ELEMENTS<br />
Item Nr.<br />
Description<br />
BPCS 574206G <strong>Axiom</strong> KE <strong>Canopy</strong> profile<br />
BPC 3000 G<br />
Primary C channel<br />
BP AWDN 21 H T bar hanger<br />
BPCS 57 G<br />
Mitre corner piece<br />
BPA 361 G<br />
Mitre corner splice connector<br />
!<br />
Recommendations<br />
<strong>Axiom</strong> KE Canopies should always be installed in<br />
accordance with all applicable building codes and<br />
regulations.<br />
• <strong>Axiom</strong> KE <strong>Canopy</strong> should only be installed on a<br />
horizontal plane. They are not approved for exterior<br />
installations.<br />
• <strong>Axiom</strong> KE <strong>Canopy</strong> should always be installed by<br />
a minimum of 2 people.<br />
• Read the installation instructions included in the<br />
carton carefully before starting the installation.<br />
• Make sure the installation is clean and safe.<br />
• Any additional weights (such as luminaires...)<br />
must be independently suspended from the soffit.<br />
• In order to avoid scratches or any other damage to the<br />
frame DO NOT remove its protective foam until the<br />
canopy is in the air.<br />
BPA 348 G<br />
BPCA 97 G<br />
BPA 347 G<br />
BPA 346 G<br />
BPA 339 H<br />
BPA 338 H<br />
Channel Bracket for <strong>Canopy</strong><br />
Clamp for C channel<br />
24mm XL 2 connector clip<br />
15mm XL 2 connector clip<br />
<strong>Axiom</strong> Universal T bar connector clip<br />
<strong>Axiom</strong> universal splice plate