March 4, 2013 - Cabarrus County

(D). The CPR Seat shall have one (1) lid with a gas strut hold open device.
(E). There shall be one (1) set of seat belts, with automotive-style retractors.
(F). There shall be storage area beneath the seat, this shall be painted to match the interior of the patient
module.
Does your bid comply?
Yes __X__ No_____
Shelving and other miscellaneous items
Where specified in the drawings with this specification there shall be adjustable shelves in the cabinets. These
shelves shall be bolted to heavy-duty infinitely adjustable strut type shelf track. The shelves shall be of .125-
inch aluminum coated on all surfaces and edges with the same color coordinated, painted finish as the interior
of the cabinet. The shelf of the cabinet will be lined with a heavy-duty rubber material. This material will be
removable for cleaning. Cabinet latches, where specified, shall be Southco black plastic flush mounting slam
type latches. At least one compartment shall have a locking latch. The Purchaser shall choose the color
scheme from samples supplied by the successful Bidder. Honeycomb, fiberglass, plywood, plastic, thinner
aluminum, or particleboard cabinet construction shall be unacceptable. Cabinet or interior walls may not be
finished using Formica type laminate material. These cabinets shall be firmly anchored (bolted) to the tapping
plates found in the ambulance structure with #10 x 24 screws that are pre-dipped with Locktite and fitted with
a metal/rubber washers which are vulcanized together to suppress vibration.
The lower 13” of the street side wall cabinets from the CPR seat down shall be protected with a single, non
spliced heavy-duty stainless steel kick panel running from the front wall to the rear of the cabinet wall.
Screws, bolts, or rivets shall not be used to attach the stainless steel, in order to maintain an attractive and
easy to clean surface. The kick panel will include a ¼” return at the base rounding the lower edge of the kick
plate in a return to the recess toe kick.
The lower 13” of the face of the squad bench on the aisle side shall be protected with a heavy-duty single non
spliced stainless steel kick plate, while the front end shall be covered in its entirety with the same material.
The stainless steel shall be attached as noted for the street side panel.
Does your bid comply?
Yes __X__ No_____
54
Attachment number 1
4-4
Page 88