March 4, 2013 - Cabarrus County

individual unit, no common walls between compartments including the patient compartment will be allowed.
All compartment joints must be sealed after MIG or TIG welding.
Each compartment shall be vented with a minimum of one (1) exhaust vent to aid in closing the doors. The
vents shall have “one way” valves to allow free flow of air when the doors are being closed but minimize entry
of dust, moisture, or other contaminants.
Does your bid comply?
Yes __X__ No_____
Matte-Flex Protection
All exterior compartment floors and shelves will be covered with Matte-flex grated material to protect
equipment and prevent premature wear and tear on either the floor or equipment stored within.
Does your bid comply?
Yes __X__ No_____
Compartment Shelving
Outside compartment shall have the following minimum requirements:
(A). All shelving to be fabricated from .125" diamond-plate with retainer lips of 1" in height showing diamondplate
on exposed surface.
(B). Shelving shall be supported by four (4) heavy duty angle brackets attached to four (4) full height formed
vertical channel tracks (2 per side). Interior flanges of channel bracket to be serrated to insure positive locking
of shelf position and prevent shakedown of shelving during transit under heavy loads. Shelves will be
positioned as follows:
(C). Easy adjustment of shelf position to be accomplished by loosening four (4) bolts.
Does your bid comply with lines “A” through ”C”?
Yes __X__ No_____
Compartment Configuration
46
Attachment number 1
4-4
Page 80