Networking

Rittal – IT Catalogue 

R

Communication is the future. 

Rittal offers inspiring IT solutions 

from the outset. 

We have the modules to precisely solve your IT tasks 

SIMPLICITY AS THE HIGHEST LEVEL 

OF PERFECTION 

As little as possible, as much as necessary – find this balance, and you have perfection. 

Our IT technology is dynamic and innovative – but we also consciously design it to be 

simple. Simplicity is your advantage. In technical terms, this means reducing complex 

and complicated correlations to a minimum. In our relationship with you, we take care of 

everything so that you needn’t worry about a thing. 

Simply perfect, thanks to intelligent system diversity and an holistic approach – 

these are customer solutions from Rittal.

CONTENTS 

Networking . . . . . . . . . . . . . . . . . . . . . . . . . 12 

Server racks . . . . . . . . . . . . . . . . . . . . . . . . 72 

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 

Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 

Monitoring & remote management . . . . . 186 

IT infrastructure/service . . . . . . . . . . . . . . 202 

Telecom/distributor racks . . . . . . . . . . . . . 220 

Yet more IT solutions . . . . . . . . . . . . . . . . 238 

System accessories . . . . . . . . . . . . . . . . . 252 

Engineering and consultancy . . . . . . . . . 400 

Innovations . . . . . . . . . . . . . . . . . . . . . . . . 422 

Rittal IT catalogue 

3

Curiosity creates new paths for us to follow. 

● Rittal’s permanent innovation achievements are the result 

of global dialogue with our customers. 

● Our own accredited laboratories guarantee quality and 

cost efficiency in accordance with ambitious international 

standards, leading to internationally recognised approvals 

for global use. 

4 Rittal IT catalogue

We give pioneering answers 

DETERMINATION IS THE ENGINE 

OF PROGRESS 

Fascinating future – we see this as much more than just a slogan. We are born to innovate. 

We live our passion, which is what makes us truly convincing. This is the only way 

for us to be credible, and to achieve lasting success with you. 

We realise the importance of continuously building on our outstanding position in order 

to rank among the technological leaders in a global market. Wireless, biometrics and 

energy-efficient protection are just some of the dynamic technologies we are pursuing 

with exceptional commitment and expertise. We are keen to be measured by these 

developments in future. 

International Rittal research teams are working for the future with clear objectives in mind: 

Exceptional benefits for the user, enhanced energy efficiency, and conservation of our 

natural resources. 

Wireless Energy efficiency Personal identification

We offer system integration – for industry and all sections of the company 

COMMUNICATION AS THE BASIS 

We live in an information society. Information and data are productivity factors. 

Every company and every individual is reliant on information. Those with better, faster 

information are able to secure a competitive lead. We ensure that modern IT technology 

has the best framework and meets your requirements to perfection. 

The Rittal system platforms are called rack, cooling, power, security and monitoring. 

Rittal solutions for the physical IT infrastructure are based on an holistic approach, 

combined with an exceptional determination to drive progress forwards at every opportunity. 

Our philosophy has made us a much sought-after partner. 

Talk to us. 

Thoroughly modern, scalable and efficient 

R 

system solutions – that’s Rittal. 


People are at the heart of all communications. They plan 

and organise, initiate and control. The IT infrastructure also 

has a decisive effect on his efficiency and success. Rittal 

offers holistic solutions which embrace all sections of the 

company, whatever the industry! 

Rack – power – cooling – security – monitoring for 

● Data centres 

● IT infrastructure 

● Data and network technology 

● Decentralised computer systems 

● Building distribution 

● Indoor and outdoor communication 

● Industrial Ethernet 


7

Expertise, customer proximity, quality, deliverability, 

product diversity and global service – these are Rittal’s 

great strengths. 

Around 10,000 Rittal employees around the globe with production 

and logistical expertise are working on customised 

developments and in modification centres, at: 

● 19 production sites 

● 60 subsidiaries 

● 70 agencies and 

● 150 distribution and logistics centres. 


We hold face-to-face meetings . . . at countless national and international trade fairs . . . and at 300 Rittal sites – worldwide. 

We are there for you, whenever and wherever you need us 

GLOBAL PROXIMITY 

To offer customer proximity, you need to be mobile. The desire to keep moving is in 

our blood. We are totally and globally customer-oriented. This is a large part of our 

attraction, which translates into a genuine added value for you. 

We are there for you. We are local. Anywhere in the world. However, for us, customer 

proximity is not just geographical; it is also a question of seeking out face-to-face 

meetings wherever possible. Because for us, a meeting is the starting point of our 

“customer-based” developments, in the most literal sense of the word. We show you 

the most innovative, most cost-efficient path. 

Requirement analysis, planning, development, prototype construction, modifications, 

tests, production, assembly, service and support – that’s Rittal service. 


9

Extensive technical expertise, well-established structures, and a complete 

service chain 

EFFICIENCY AS STANDARD 

Efficiency is a combination of efficacy plus cost-effectiveness. It sounds easy, and it is, 

but only provided all parts work together with optimum interaction between individual 

modules. Rittal sets new standards: TBU – Total Benefit of Usership – considers all the 

benefits arising from the use of a product. In order to achieve the aspired levels of 

availability and reliability (efficacy), the sum total of all purchase and operating costs 

(cost-efficiency) must be reduced to a minimum, a process that we have perfected to 

a fine art. Energy efficiency comes as standard with Rittal, particularly when it is a 

question of supplying complete solutions for optimum reliability and maximum availability 

with an appropriate level of investment. This demands integrated solutions, such 

as those supplied by Rittal worldwide on every scale. Furthermore, Rittal is distinguished 

by the innovative strengths we derive from our relentless curiosity and fascination. 

Tailor-made systems, no over-sizing, no unnecessary fixed costs, and where 

necessary, simple expansion with the system operational – this is the 

“pay-as-you-go” concept from Rittal. 

RimatriX5 IT infrastructures Business continuity management Physical IT security

Rittal International, compromising of – Rittal – Litcos – Lampertz –, 

offers its customers holistic IT infrastructures from a single source. 

High standards of reliability and availability are achieved costeffectively, 

with perfect results. 

● With RimatriX5, Rittal offers a comprehensive range of services 

and a full choice of modules for your rack-based IT infrastructure. 

● Litcos: Analytical advice and holistic planning of data centre 

structures. 

● Lampertz: Modular IT security rooms (room-within-a-room concept) 

and IT security cabinets, with an emphasis on fire and theft 

protection. 


11

A complete network of 

enclosure solutions 

Rittal produces innovative, cost-effective solutions for all 

types of IT enclosure systems. Compact, stylish, pre-configured, 

and in a wide range of sizes. Moreover, Rittal has 

a range of system accessories to suit every enclosure, and 

therefore offers a suitable enclosure solution for every application. 

Rittal networking always means accessing the 

holistic solution; the integrative Rittal system. From power 

management, to security and monitoring, through to cooling. 

Rittal enclosure solutions are far more than just the width, 

height and depth of the enclosure. Instead, they are a 

Networking from page 14 

System comparison of enclosures....................................................14 

System comparison of wall-mounted enclosures .............................16 

Installation examples ........................................................................18 

Network enclosures, based on Rittal TE 7000..................................26 

Network enclosures, based on Rittal TS 8........................................32 

Network enclosures, based on Rittal flexRack(i) ..............................48 

RNC enclosures................................................................................53 

Accessories for RNC enclosures......................................................55 

Wall-mounted enclosures, based on Rittal QuickBox ......................57 

Wall-mounted enclosures, based on Rittal AE .................................60 

Wall mounted enclosure, based on Rittal AE, with pull-out frame....61 

Wall-mounted enclosures, based on Rittal EL, 3-part ......................62 

Wall-mounted enclosures, based on Rittal EL, 2-part ......................66 

EMC wall-mounted enclosure, based on Rittal EL, 3-part................67 

Small fibre-optic distributors.............................................................68 

Small fibre-optic distributors, based on Rittal AE .............................69 

Fibre-optic marshalling enclosure ....................................................70 

Small fibre-optic distributor, polycarbonate .....................................71 

Networking 

complementary network of versatile ideas for adapting to 

practical requirements and the needs of the future. 

TE 7000 network enclosures 

Two depth-variable 482.6 mm (19″) 

mounting levels provide a solid framework 

(load capacity 400 kg) for all 

fixed and patching tasks. 

In keeping with the principle “as little 

as possible, as much as necessary”, 

this rack does not require an 

enclosure frame. Benefits: Optimum 

accessibility and simple assembly. 

A practical, cost-effective solution for 

distributors in office environments. 

TS 8 network enclosures 

A diversity of applications and variability, 

both as a distributor and in combination 

with installed servers. 

Regardless of how demanding your 

requirements may be, unrestricted 

mounting diversity and a comprehensive 

range of system accessories 

means that a solution with TS 8 always 

offers excellent value for money. 

Reliability and availability may be 

tailored precisely to requirements, 

using modular lock, climate control 

and monitoring solutions. 

Wall-mounted enclosures 

The Rittal wall-mounted range has something 

for everyone. 

Tailored to IT distribution applications, 

they are distinguished by optimum 

accessibility, high production 

quality, and a comprehensive range of 

system accessories. 

Rittal IT catalogue/Networking 

13


System comparison of enclosures 


Plan with the best network enclosure for your requirements! 

Customers’ requirements of IT enclosures can be 

TE 7000 

extremely varied. With this in mind, Rittal offers three 

different system platforms with outstanding design 

features for a variety of applications. 

Rittal system comparison TE 7000 TS 8 FR(i) 

One platform for all requirements 

in the IT market 

Load capacity 

up to 400/700 kg 

up to 1000 kg 

Baying 

Side to side 

In all levels 

 

Dismantling 

Climate control 

Fans 

Cooling unit 

 

Air/water 

heat exchanger 

 

CPU liquid cooling 

Cabling 

Cable space 

Cable management 

Lock system 

2-point 

4-point 

 

Security 

Access control 

Thermal management 

Interior installation 

Depth-variable 

Partial installation 

2-level principle 

Aesthetics 

Standards 

IEC 60 297-1-2 

Protection 

categories 

Note: 

The more the greater the compatibility. 

IP 20 

IP 40 

IP 55 

 

TE 7000 – Top efficiency, the global IT rack 

Ready to use for network distribution. As little as possible, 

as much as necessary – the rack for rational, costeffective 

cabling. 

● At its core is the robust frame comprising two 

482.6 mm (19″) mounting levels. 

● Two-point locking rod, optionally with Ergoform-S 

handle system. 

● System accessories ensure fast, versatile configuration. 

Network enclosures TE 7000, see page 26. 

14 Rittal IT catalogue/Networking


System comparison of enclosures 

Rittal TS 8 

Rittal flexRack(i) 


TS 8 – the Top enclosure system 

This offers diversity and protection for your network, 

based on the ingenious rack profile. With two levels, it 

facilitates unlimited interior installation. 

● Suitable for one or two 482.6 mm (19″) mounting 

levels, partial or full installation. 

● The ingenious symmetry concept of the frame offers 

baying on all sides. 

● A high level of security, thanks to lock systems with 

a comfort handle and 4-point locking. 

● Perfect integration of climate control components. 

● Protection category up to IP 55. 

Network enclosures TS 8, see page 32. 

flexRack(i) – The high-end designer rack 

A stylish design, a high degree of stability, plus futuristic 

technology – with the hollow aluminium section. 

● Cables may be routed and system accessories 

integrated within the hollow chamber of the frame 

section. 

● Power management integrated directly into the frame 

section. Three-phase infeed using the plug & play 

system, with no loss of enclosure volume. 

Network enclosures flexRack(i), see page 48. 


15


System comparison of wall-mounted enclosures 

The configuration of decentralised network units is extremely 


important for small and medium-sized companies. Rittal has 

high-quality solutions to meet virtually every requirement of a 

growing network. 

RNC enclosure 

RNC universal enclosure 

Prepared for the installation of 

1 

/ 219″ components. 10″ components 

may also be installed by 

using an adaptor. 482.6 mm 

(19″) variant for vertical populati 

Side panels with integral vent 

slots. 

The floor-standing enclosure 

may also be used as a wallmounted 

enclosure with additional 

support brackets. 

The universal enclosure, vertical 

for 19″ installation, horizontal for 

1 

/ 219″ or 10″ installation. 

Bayed for 482.6 mm (19″) configuration, 

vertical and horizontal. 

Passive ventilation 

To accommodate a prepared 

fan, cable entry with brush strip. 

Wall-mounted enclosures, based on Rittal QuickBox 

Cut-outs in the mounting 

bracket for access to the rear 

of the patch panels or active 

components. 

Slide rails to support heavy 

assemblies. 

Vent slots for passive ventilation. 



System comparison of wall-mounted enclosures 

Whether fibre-optic or copper distributors, 1 / 219″ or 19″ enclosures, 

high protection category or passively vented wall-mounted 

enclosures, the IT wall-mounted distributor range covers every 

conceivable requirement and is available off the shelf. 


Wall-mounted and distribution enclosures 

Wall-mounted enclosure 

based on AE with pull-out frame 

or depth-adjustable 482.6 mm 

(19″) level. 

Small fibre-optic distributor 

As a corridor and intermediate 

distributor of fibre-optic cables. 

Small fibre-optic distributor, 

based on AE 

The ideal enclosure for breakout 

applications. 

Fibre-optic marshalling 

enclosure 

Two access areas: 

1. For splicing cassette mounting 

2. For the patching chamber. 

Small fibre-optic distributors, 

polycarbonate, for extreme 

conditions with a high protection 

category of IP 66 to 

EN 60 529/10.91. 

Wall-mounted enclosures, based on Rittal EL, 3-part/2-part 

Optimum accessibility thanks to 

3-part or 2-part vertically hinged 

configuration. 

Equipped with Mini comfort handle 

(3 – 15 U), comfort handle 

(18 and 21 U) and replaceable 

cable gland plates. 

2-part enclosure with swing 

frame. Facility for installing subracks 

and electronic components. 


17

TE 7000 

Network enclosures 

This is what TE Top Efficiency looks like! 

The rack for rational, cost-effective cabling, ready to use in 


network distribution: 

At its core is the robust frame comprising two 482.6 mm (19″) 

attachment levels. Add to this a host of useful accessories 

from Rittal’s comprehensive modular system, and you will 

arrive at the precise configuration which meets your requirements 

to perfection, quickly and cost effectively. 

Note: 

TE 7000 network enclosures, see page 26. 

Parts list with model numbers for this example, 

see page 22. 

10 

12 

1 

11 

2 

6 

14 

13 

3 

15 

7 

5 

8 

9 

4 

Example: System accessories for perfect configuration of a TE 7000 network enclosure 

Use these examples to help you. 

Socket strips, lights, cable management 

devices and other system accessories are 

all available from Rittal, in a wide range of 

variants suitable for different applications. 

1 Light, 1 U 

2 Fan unit, active 

3 Fibre-optic cable management panel, 

1U 

4 Cable routing bar, 1 U 


6 

7 

8 

9 

10 

11 

12 

13 

14 

15 

Socket strip TE, 8-way 

Cable management panel, 1 U 

Cable gland panel 

Cable routing bar, cranked, 4 U 

Component shelf, static installation 

Distributor clip, small 

Earth rail 

Distributor clip, large 

Drawer, 2 U 

UPS, single-phase 


19

TS 8 

Network enclosures 

Customised from the modular system – the fast route to a 


Top solution! Stylish glazed door, maximum installation variability, 

and exceptional security thanks to the lock system and 

protection category (up to IP 55) – these are the distinguishing 

features of the TS 8 Top enclosure system. The symmetrical 

layout and two-level principle of the TS 8 section facilitate optimum 

space utilisation in every level. 

At the same time, the TS 8 is extremely resilient (load capacity 

up to 1000 kg) and offers various options for system integration 

(power supply, climate control, access protection and 

monitoring). 

Note: 

TS 8 network enclosures, see page 32. 


see page 23. 

7 

13 

1 

14 

3 

2 

5 

9 

8 

15 

16 

17 

4 

10 

18 

11 

6 

12 

Example: System accessories for perfect configuration of a TS 8 network enclosure 

Rittal system accessories are available 

in many different variants, tailored to the 

intended application. 482.6 mm (19″) 

partial configuration and the use of component 

shelves across the entire enclosure 

width are likewise easily achieved. 


1 System light (Linestra) 

2 Fan tray 

3 Power cable, light 

4 Cable routing bar, cranked, 4 U 

5 C rails 

6 Fibre-optic cable management panel, 

1U 

7 Cable gland panel 

8 Socket strip, 5-way with overvoltage 

protection and RFI suppressor filter 

9 Socket strip, 7-way 

10 Component shelf, 482.6 mm (19″) 

installation 

11 Telescopic slides for component shelf 

12 Cable management panel, 1 U 


14 Cable management panel, 1 U 

15 Drawer, 2 U 

16 Blanking panel, 482.6 mm (19″), 2 U 

17 Distributor clip, large 

18 UPS, single-phase 


21


Parts list for the configuration example TE 7000 


No. Name Packs of Model No. Page 

TE 7000 network enclosure, pre-configured 

W = 800 mm, H = 2000 mm, D = 800 mm 

1 DK 7000.850 26 

Accessories 

1 Light, 1 U 1 DK 7109.200 335 

2 Fan unit, active 1 DK 7000.670 128 

3 Fibre-optic cable management panel, 1 U 1 DK 7256.035 363 

4 Cable routing bar, 1 U 10 DK 7111.212 360 

5 Cable routing bar, 4 U 4 DK 7111.222 360 

6 Socket strip TE, 8-way 1 DK 7000.630 331 

7 Cable management panel, 1 U 1 DK 7257.035 361 

8 Cable gland panel 1 DK 7140.535 363 

9 Cable routing bar, cranked, 4 U 4 DK 7111.220 360 

10 Component shelf, static installation 1 DK 7000.620 320 

11 Distributor clip, small 4 DK 7111.250 360 

12 Earth rail, vertical 1 DK 7113.000 338 

13 Distributor clip, large 4 DK 7111.252 360 

14 Drawer, 2 U 1 DK 7282.035 385 

15 UPS, single-phase 1 DK 7857.430 433 

Optional accessories 

A Power: Single-phase UPS 433 

B Security: Monitoring system CMC-TC 158 

C Cooling: Fan systems 123 

D Lock systems 282 

E Lock cylinder 282 

F Cable routing, cable routing bars 360 

A 

Single-phase UPS 

B 

Monitoring system CMC-TC 

C Fan systems 

D 

Lock systems 

E 

Lock cylinder 

F 

Cable bars 



Parts list for the configuration example TS 8 


TS 8 network enclosure, pre-configured 

W = 800 mm, H = 2000 mm, D = 800 mm 

DK 7930.200 32 

Accessories 

1 System light (Linestra) 1 PS 4103.350 335 

2 Fan tray 1 DK 7988.035 127 

3 

4 

5 

6 

7 

8 

9 

10 

11 

12 

13 

14 

15 

16 

Power cable, light 5 PS 4315.100 336 

Cable routing bar, cranked, 4 U 4 DK 7111.220 360 

C rails DK 7828.080 307 

Fibre-optic cable management panel, 1 U 1 DK 7256.035 363 

Cable gland panel 1 DK 7140.535 363 

Socket strip, 5-way with overvoltage protection and interference 

suppressor filter 

1 DK 7240.230 328 

Socket strip, 7-way 1 DK 7240.210 328 

Component shelf, 482.6 mm (19″) configuration 1 DK 7145.035 319 

Telescopic slides for component shelf 2 DK 7081.000 326 

Cable management panel, 1 U 1 DK 7257.035 361 

Cable routing bar, 4 U 4 DK 7111.222 360 

Cable management panel, 1 U 1 DK 7159.035 361 

Drawer, 2 U 1 DK 7282.035 385 

Blanking panel, 482.6 mm (19″), 2 U 2 DK 7152.035 392 

17 Distributor clip, large 4 DK 7111.252 360 



A Voltage supply: Energy-Box 332 

B Security: Monitoring system CMC-TC 158 

C Cable management 350 

D 19″ installation system 364 

E Doors 277 

F Interior installation 295 


A 

Energy Box 

B Monitoring system CMC-TC 

C 

Cable management 

D 

19″ installation system 

E 

Designer glazed door 

F 



23

Wall-mounted enclosure, 3-part 

A high protection category and optimum accessibility thanks to a 3-part, vertically hinged configuration – the EL 

wall-mounted enclosure with 482.6 mm (19″) mounting angles is ideally suited for small, decentralised networks, 

as a corridor distributor, or for all “Ethernet goes factory” applications. The EL enclosure proves that a protection 

category of up to IP 55 is no barrier to an attractive design, making Note: 

Wall-mounted enclosure, 3-part, 

it particularly suitable for use even in tough industrial environments. see page 62. 

1 

5 

4 

7 

2 

3 

6 

System accessories for pre-configured wall-mounted enclosure, 3-part (DK 7715.735), W x H x D mm = 600 x 746 x 572.5, 15 U: 

1 

2 

3 

Shunting ring with cable shunting ring, 

polyamide (DK 7159.035) 

2 outlet filters (SK 3322.207), 

included in supply 

Junction box (DK 7280.035) 

4 Mini Comfort handle (DK 7705.120), 

included in the supply 

5 

6 

7 

Socket strip, 7-way (DK 7240.210) 

Component shelf 2 U, static installation 

(DK 7119.400) 

Earth rail with star earthing (DK 7113.000), 

included in the supply 


QuickBox wall-mounted enclosure 

Installations that are accessible from all sides are extremely advantageous in day-to-day handling. 

The removable cover of the QuickBox complements this to perfection. Other consistent design 

features, such as large cut-outs in the mounting 

brackets, brush strips and vent slots, make the QuickBox 

a universal office distributor. 

Note: 

QuickBox wall-mounted enclosures, 

see page 57. 

1 

4 

2 

3 

6 

5 

System accessories for QuickBox wall-mounted enclosure (DK 7502.046), W x H x D mm = 600 x 762 x 600, 15 U: 

1 

2 

3 

Mounting angles, 482.6 mm (19″) 

(DK 7502.204) 

Cable panel with cable shunting ring, 

polyamide (DK 7255.035) 

Junction box (DK 7280.035) 

4 

5 

Socket strip, 7-way (DK 7240.210) 

Component shelf 2 U, static installation 

(DK 7119.400) 

6 Brush strip top and bottom. 


25


Network enclosures TE 7000, pre-configured 

T1 

B 


H 

T1 

B 

H 

Benefits: 

● 19″ mounting angles front and 

rear always included 

● No frame structure, 

optimum accessibility 

● Load capacity up to 400 kg 

● Pre-configured solution, 

including extensive accessory 

kit. 

Material: 

Sheet steel 

Surface finish: 

Mounting frame: 

Electrophoretic dipcoat-primed 

Enclosure panels: 

Powder-coated, RAL 7035. 

Pre-configured Pre-configured Page 

U 24 42 

Width (B) mm 1) 800 800 

Height (H) mm 1) 1200 2000 

Depth (T1) mm 1) 800 800 

Distance between 482.6 mm (19″) levels in its delivered state mm 495 495 

Model No. TE 7000.840 7000.850 

Model No. TE as bayed enclosure without side panels, including baying kit – 7000.852 

Supply includes 

Self-supporting 482.6 mm (19″) frame structure, depth-variable at the front and rear 

Glazed door at the front, including 130° hinge, two-point locking rod, recessed handle and 

security lock 3524 E 

 

 

Sheet steel door at the rear, including 130° hinge, two-point locking rod, recessed handle and 

security lock 3524 E 

 

 

Pluggable weight-reduced side panels, including security lock 3524 E (7000.850 only) 

Base frame with maximum cut-out (for optional population with modular panels, solid, 

with passive ventilation or for cable entry) 

 

 

Roof plate including brush strip for cable entry and concealed cut-out for population via the active fan plate 

4 levelling feet (including base/plinth adaptor) supplied loose 

Spacers, 20 mm, supplied loose to raise the roof 

Base/plinth 100 mm, vented 

Tested frame earthing to EN 60 950, fitted 

Accessory kit 

4 C rails, for cable clamping in the enclosure depth via cable clamps, supplied loose 

10 cable shunting rings made of plastic, 105 x 70 mm, supplied loose 

50 captive nuts, M6, conductive, supplied loose 

50 multi-tooth screws, M6, with plastic washers, supplied loose 

Premium accessories TE, for direct mounting in the delivered state 

Ergoform S handle for semi-cylinder, to exchange for the existing lock 2435.000 2435.000 284 

Fan module, with 2 fans and thermostat, pre-wired ready for connection 7000.670 7000.670 128 

Slide rail for TE, for attachment between the 482.6 mm (19″) mounting frames, length 424 mm 7963.410 7963.410 384 

19″ component shelf for static installation, for direct screw-fastening without an installation kit, 412 mm deep, 

load capacity 30 kg, static 

7000.620 7000.620 320 

Punched section with mounting flange 17 x 73 mm, for mounting installation components, attached in the 

enclosure depth between the 482.6 mm (19″) mounting frames 

8612.040 8612.040 299 

C rail, for cable clamping in the enclosure depth via cable clamps 

C rail, for cable clamping in the enclosure width via cable clamps, 

on the 482.6 mm (19″) mounting frame at the rear 

7828.060 7828.060 307 

Cable clamp rail, depth-variable 325 – 575 mm, for cable attachment in the enclosure depth via cable ties 7858.160 7858.160 354 

Cable clamp rail for cable attachment in the enclosure depth using cable ties, 


7828.062 7828.062 354 

Earthing kit for TE 

Economy socket strip, 8-way for earthing-pin plugs 7000.630 7000.630 331 

Included with the supply. 1) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 



Network enclosures, based on Rittal TE 7000, width 600 

T 

B 

H 

HE 

A 


19˝ 

HE = U 

A = Defined mounting 

distance for Premium 

accessories, see below. 

Benefits: 

● Accessories configured to 

order for fast installation 

● No frame structure, optimum 

accessibility 


Material: 

Sheet steel 





Powder-coated, RAL 7035/ 

RAL 9005 

Supply includes: 

Self-supporting 482.6 mm (19″) 

frame structure, 

glazed door at the front, 

two-point locking rod, recessed 

handle and security lock 3524 E, 

sheet steel door at rear, 


handle and security lock 

3524 E, plug-in side panels 

with security lock 3524 E, 

base frame with maximum 

cut-out (for optional population 

with module plates), roof plate 

for cable entry with concealed 

cut-out for fan, levelling feet, 

spacers for raising the cover 

plate. 

Detailed drawing, 

available on the Internet. 

U 11 11 24 24 42 42 47 47 

Width (B) mm 1) 600 600 600 600 600 600 600 600 

Height (H) mm 1) 600 600 1200 1200 2000 2000 2200 2200 

Depth (T1) mm 1) 600 800 600 800 600 800 600 800 

Distance between 482.6 mm (19″) levels 

as delivered A mm 

495 495 495 495 495 495 495 495 

Model No. TE, RAL 7035 7000.390 7000.410 7000.430 7000.440 7000.500 7000.510 7000.560 7000.570 

Model No. TE as a bayed enclosure 

without side panels, incl. baying kit, RAL 7035 

– – – – 7000.502 – 7000.562 – 

Model No. TE including side panels, RAL 9005 – – – – 7000.505 2) 7000.515 2) – – 

1) All sizes are nominal dimensions. For absolute dimensions, refer to detailed drawings on the Internet. 2) Delivery times on request. 

A 

B 

C 

D 

495 mm – This is the distance 

between the two 482.6 mm 

(19″) levels for all enclosure 

formats in their delivered state. 

Complies with TS 8 nominal 

depth 400 mm, inner level. 

Pitch spacing 50 mm. 

The distance between the two 

482.6 mm (19″) levels may be 

varied in increments of 50 mm 

(445 to 695 mm). 

Distance from door: 

52.5 mm for depth 600 


The mounting distance in a 

rear mounting frame, horizontal, 

corresponds to the frame 

mounting dimensions of a 

600 mm wide TS 8 (inner level, 

512 mm). 

E = A – 120 mm 

Choose the distance between 

levels completely freely via the 

slot fastening. All key mounting 

components – punched sections 

with mounting flanges, installation 

kits, slide rails, component 

shelves – are also available in a 

depth-variable version. 

600 

600 

A 

D 

800 

600 

A 

German registered design 

no. 403 07 489 

D 

C 

E 

A 

B 

D 

Accessories Page 252 Monitoring Page 187 Climate control Page 113 


27




U 11 11 24 24 Page 

Width (B) mm 1) 600 600 600 600 

Height (H) mm 1) 600 600 1200 1200 

Depth (T1) mm 1) 600 800 600 800 

Distance between 482.6 mm (19″) levels in its delivered state A mm 495 495 495 495 

Model No. TE, RAL 7035 7000.390 7000.410 7000.430 7000.440 

Model No. TE as a bayed enclosure without side panels, 

incl. baying kit, RAL 7035 

– – – – 

Model No. TE including side panels, RAL 9005 – – – – 

Doors 

Glazed front door/sheet steel rear door 

Sheet steel front door/sheet steel rear door on request on request on request on request 

Ergoform-S handle for semi-cylinder, 

in exchange for the existing lock 

2435.000 2435.000 2435.000 2435.000 284 

Side panel 

Side panel, plug-type, 

including security lock 3524 E 

 

Baying kit 7000.640 7000.640 7000.640 7000.640 276 

Roof 

Roof plate with brush strip for cable entry, 

prepared to accommodate an active fan unit 

 

Fan unit, 2 fans (max. 3) including thermostat 7000.670 7000.670 7000.670 7000.670 128 

Fan expansion kit 7980.000 7980.000 7980.000 7980.000 127 

Spacers 20 mm to raise the cover plate above 

the fan cut-out 

 

Base/plinth 

Roof frame with maximum cut-out for individual population 

with module plates, levelling feet M10 

 

Module plate variants for individual population from page 264 from page 264 from page 264 from page 264 

Base/plinth components solid, front and rear 8601.605 8601.605 8601.605 8601.605 255 

Base/plinth components, vented, front and rear 7825.601 7825.601 7825.601 7825.601 255 

Base/plinth trim, side 8601.065 8601.085 8601.065 8601.085 255 

Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 262 

Levelling feet M12 4612.000 4612.000 4612.000 4612.000 260 

Base/plinth installation accessories from page 254 from page 254 from page 254 from page 254 

Interior installation/Premium accessories 

482.6 mm (19″) mounting frames front and rear 

Punched section with mounting flange 17 x 73 mm, for mounting 

installation components, attached in the enclosure depth between 8612.040 8612.040 8612.040 8612.040 299 

the 482.6 mm (19″) mounting frames 

Cable clamp rail, depth variable 325 – 575 mm, 

for cable attachment in the enclosure depth using cable ties 

7858.160 7858.160 7858.160 7858.160 354 

Cable clamp rail, for cable attachment in the enclosure width via 

cable ties, on the 482.6 mm (19″) mounting frame at the rear 

7828.062 7828.062 7828.062 7828.062 354 

C rail, for cable clamping in the enclosure depth via cable clamps 7828.040 7828.040 7828.040 7828.040 307 



7828.060 7828.060 7828.060 7828.060 307 

Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 339 

TE socket strip, 8-way with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 331 

Power accessories from page 328 from page 328 from page 328 from page 328 

Slide rail for TE, for attachment between the 482.6 mm (19″) 

mounting frames, length 424 mm 

7963.410 7963.410 7963.410 7963.410 384 

482.6 mm (19″) component shelf for static installation, 

for direct screw-fastening wtihout installation kit, 412 mm deep, 

7000.620 7000.620 7000.620 7000.620 320 


Cable management from page 341 from page 341 from page 341 from page 341 

CMC-TC monitoring system from page 158 from page 158 from page 158 from page 158 

Included with the supply. 

1) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 






U 42 42 47 47 Page 

Width (B) mm 1) 600 600 600 600 

Height (H) mm 1) 2000 2000 2200 2200 

Depth (T1) mm 1) 600 800 600 800 

Distance between 482.6 mm (19″) levels in its delivered state A mm 495 495 495 495 

Model No. TE, RAL 7035 7000.500 7000.510 7000.560 7000.570 



7000.502 – 7000.562 – 

Model No. TE including side panels, RAL 9005 7000.505 2) 7000.515 2) – – 

Doors 


Sheet steel front door/sheet steel rear door on request on request on request on request 



2435.000 2435.000 2435.000 2435.000 284 

Side panel 



(7000.500, 

7000.505 only) 

(7000.560 only) 266 

Baying kit (7000.502 only) 7000.640 (7000.562 only) 7000.640 276 

Roof 



 

Fan unit, 2 fans (max. 3) including thermostat 7000.670 7000.670 7000.670 7000.670 128 

Fan expansion kit 7980.000 7980.000 7980.000 7980.000 127 

Spacers 20 mm to raise the cover plate above the fan cut-out 

Base/plinth 

Base frame with max. cut-out for individual population with module 

plates, levelling feet M10 

 

Module plate variants for individual population from page 264 from page 264 from page 264 from page 264 

Base/plinth components solid, front and rear 8601.605 8601.605 8601.605 8601.605 255 

Base/plinth components, vented, front and rear 7825.601 7825.601 7825.601 7825.601 255 

Base/plinth trim, side 8601.065 8601.085 8601.065 8601.085 255 

Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 262 

Levelling feet M12 4612.000 4612.000 4612.000 4612.000 260 

Base/plinth installation accessories from page 254 from page 254 from page 254 from page 254 




installation components, attached in the enclosure depth between 8612.040 8612.040 8612.040 8612.040 299 




7858.160 7858.160 7858.160 7858.160 354 



7828.062 7828.062 7828.062 7828.062 354 

C rail, for cable clamping in the enclosure depth via cable clamps 7828.040 7828.040 7828.040 7828.040 307 



7828.060 7828.060 7828.060 7828.060 307 

Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 339 

TE socket strip, 8-way with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 331 

Power accessories from page 328 from page 328 from page 328 from page 328 



7963.410 7963.410 7963.410 7963.410 384 


for direct screw-fastening without an installation kit, 412 mm deep, 7000.620 7000.620 7000.620 7000.620 320 



CMC-TC monitoring system from page 158 from page 158 from page 158 from page 158 


1) 

All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 

2) Delivery times available on request. 



29



T1 

B 


H 

HE 

A 

19˝ 

HE = U 

A = Defined mounting 

distance for Premium 

accessories, see below. 

Benefits: 

● Accessories configured to 

order for fast installation 

● No frame structure, optimum 

accessibility 


Material: 

Sheet steel 





Powder-coated, RAL 7035/ 

RAL 9005 




glazed door at the front, 


handle and security lock 3524 E, 

sheet steel door at rear, 


handle and security lock 

3524 E, plug-in side panels 

with security lock 3524 E, 

base frame with maximum 

cut-out (for optional population 

with module plates), roof plate 

for cable entry with concealed 

cut-out for fan, levelling feet, 

spacers for raising the cover 

plate. 



U 24 24 42 42 47 47 

Width (B) mm 1) 800 800 800 800 800 800 

Height (H) mm 1) 1200 1200 2000 2000 2200 2200 

Depth (T1) mm 1) 600 800 600 800 600 800 

Distance between 482.6 mm (19″) levels in its delivered state A mm 495 495 495 495 495 495 

Model No. TE, RAL 7035 7000.450 7000.460 7000.520 7000.530 7000.580 7000.590 

Model No. TE as bayed enclosure without side panels, including baying 

kit, RAL 7035 

– – – 7000.532 – 7000.592 

Model No. TE including side panels, RAL 9005 – – 7000.525 2) 7000.535 2) – – 

1) All sizes are nominal dimensions. For absolute dimensions, refer to detailed drawings on the Internet. 2) Delivery times on request. 

A 

B 

C 

D 

495 mm – This is the distance 

between the two 482.6 mm 

(19″) levels for all enclosure 

formats in their delivered state. 

Complies with TS 8 nominal 

depth 400 mm, inner level. 

Pitch spacing 50 mm. 

The distance between the two 

482.6 mm (19″) levels may be 

varied in increments of 50 mm 

(445 to 695 mm). 

Distance from door: 



The mounting distance in a 

rear mounting frame, horizontal, 

corresponds to the frame 

mounting dimensions of a 

600 mm wide TS 8 (inner level, 

512 mm). 

E = A – 120 mm 

Choose the distance between 

levels completely freely via the 

slot fastening. All key mounting 

components – punched sections 

with mounting flanges, installation 

kits, slide rails, component 

shelves – are also available in a 

depth-variable version. 

600 

800 

A 

D 

800 


no. 403 07 489 

800 

A 

D 

C 

E 

A 

B 

D 






U 24 24 42 42 47 47 Page 

Width (B) mm 1) 800 800 800 800 800 800 

Height (H) mm 1) 1200 1200 2000 2000 2200 2200 

Depth (T1) mm 1) 600 800 600 800 600 800 

Distance between 482.6 mm (19″) levels in its delivered state A mm 495 495 495 495 495 495 

Model No. TE, RAL 7035 7000.450 7000.460 7000.520 7000.530 7000.580 7000.590 



– – – 7000.532 – 7000.592 

Model No. TE including side panels, RAL 9005 – – 7000.525 2) 7000.535 2) – – 

Doors 


Sheet steel front door/sheet steel rear door on request on request on request on request on request on request 



2435.000 2435.000 2435.000 2435.000 2435.000 2435.000 284 

Side panel 



 

( 7000.530, 

7000.535 

only) 

 

(7000.590 

only) 

Baying kit 7000.640 7000.640 7000.640 

(7000.532 

(7000.592 

7000.640 

only) 

only) 

276 

Roof 



 

Fan unit, 2 fans (max. 3) including thermostat 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 128 

Fan expansion kit 7980.000 7980.000 7980.000 7980.000 7980.000 7980.000 127 

Spacers 20 mm to raise the cover plate above the fan cut-out 

Base/plinth 

Base frame with max. cut-out for individual population with module 

plates, levelling feet M10 

 

Module plate variants for individual population from p. 264 from p. 264 from p. 264 from p. 264 from p. 264 from p. 264 

Base/plinth components solid, front and rear 8601.805 8601.805 8601.805 8601.805 8601.805 8601.805 255 

Base/plinth components, vented, front and rear 7825.801 7825.801 7825.801 7825.801 7825.801 7825.801 255 

Base/plinth trim, side 8601.065 8601.085 8601.065 8601.085 8601.065 8601.085 255 

Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 8800.220 8800.220 262 

Levelling feet M12 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 260 




installation components, attached in the enclosure depth between 8612.040 8612.040 8612.040 8612.040 8612.040 8612.040 299 




7858.160 7858.160 7858.160 7858.160 7858.160 7858.160 354 



7828.062 7828.062 7828.062 7828.062 7828.062 7828.062 354 

C rail, for cable clamping in the enclosure depth via cable clamps 4943.000 4943.000 4943.000 4943.000 4943.000 4943.000 307 



7828.060 7828.060 7828.060 7828.060 7828.060 7828.060 307 

Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 339 

TE socket strip, 8-way with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 331 

Power accessories from p. 328 from p. 328 from p. 328 from p. 328 from p. 328 from p. 328 



7963.410 7963.410 7963.410 7963.410 7963.410 7963.410 384 


for direct screw-fastening without an installation kit, 412 mm deep, 7000.620 7000.620 7000.620 7000.620 7000.620 7000.620 320 


Cable management from p. 341 from p. 341 from p. 341 from p. 341 from p. 341 from p. 341 

CMC-TC monitoring system from p. 158 from p. 158 from p. 158 from p. 158 from p. 158 from p. 158 




266 



31


Network enclosures, based on Rittal TS 8, pre-configured 

T1 

B1 

T1 

B1 

H2 

H2 

H1 

H3 

H1 


H3 

B2 

T2 

Material: 

Sheet steel 


Enclosure frame: 

Dipcoat-primed 

Doors, roof and base/plinth: 

Dipcoat-primed, 

powder-coated in RAL 7035 

Gland plates, punched sections 

with mounting flanges and 

mounting angles: 

Zinc-plated, passivated 


Enclosure frame with doors or 

rear panel, roof plate, vented 

base/plinth 100 mm, 

earthing of all enclosure panels; 

Supplied loose: 

Levelling feet incl. base/plinth 

adaptor, 

4 spacers, for raising the roof, 

4 cable clamp rails for the inner 

frame level, 

10 cable shunting rings 

(105 x 70 mm, plastic, for 

DK 7930.100 in 44 x 70 mm), 

50 captive nuts, M6, conductive, 

50 multi-tooth screws M6. 

Version 1 

Designer glazed door at the 

front, 180°, with comfort handle 

for semi-cylinder and security 

lock 3524 E; 

Sheet steel door at the rear, 

130°, with swivel handle and 

security lock 3524 E. 

482.6 mm (19″) mounting 

angles, front, fitted approx. 

150 mm behind the frame front 

edge, screw-fastened to the TS 

punched sections with mounting 

flange as depth stays. 

Gland plate, one-piece, vented, 

with cable entry. 

Version 2 




lock 3524 E; 





angles 

at the front and rear, distance 

between levels pre-configured 

at 498 mm. Cranked mounting 

angles screw-fastened to installation 

brackets approx. 150 mm 

behind the frame front edge. 

Gland plate at the front, fitted as 

an infill panel. 



Version 1 Version 2 Version 2 Version 2 

U 24 38 42 47 

Width (B1) mm 1) 600 800 800 800 

Height (H1 + H2) mm 1) 1200 + 100 1800 + 100 2000 + 100 2200 + 100 

Depth (T1) mm 1) 600 800 800 800 

Clearance width (B2) mm 512 712 712 712 

Clearance height (H3) mm 1112 1712 1912 2112 

Clearance depth (T2) in mm 512 712 712 712 

Model No. DK including 2 plug-in side panels, 

with security lock 3524 E 

Model No. DK as a bayed enclosure without side panels, 

incl. baying kit TS 8800.500 

7930.100 3) 7930.800 3) 7930.200 3) 7930.220 3) 



3) Aluminium glazed door, delivery times available on request. 

– 7930.850 2)3) 7930.250 3) 7930.270 2)3) 





Version 1 Version 2 Version 2 Version 2 Page 


U 24 38 42 47 

Width (B1) mm 1) 600 800 800 800 

Height (H1 + H2) mm 1) 1200 + 100 1800 + 100 2000 + 100 2200 + 100 

Depth (T1) mm 1) 600 800 800 800 



Model No. DK as bayed enclosure without side 

panels, including baying kit TS 8800.500 

7930.100 7930.800 7930.200 7930.220 

– 7930.850 2) 7930.250 7930.270 2) 

Doors 

Designer glazed front door/sheet steel rear door 

Various door options from page 277 from page 277 from page 277 from page 277 

180° hinges for sheet steel rear door 8800.190 8800.190 8800.190 8800.190 288 

Side panel 

Side panel, plug-in, IP 20 (7930.800 only) (7930.200 only) (7930.220 only) 

Lock for side panel, plug-in, 3524 E 

Internal latch for side panel, plug-in 7824.510 7824.510 7824.510 7824.510 266 

Side panel, screw-fastened, IP 55 8170.235 8188.235 8108.235 8128.235 265 

Baying from page 270 from page 270 from page 270 from page 270 

Roof 

Roof plate for cable entry 

Roof plate, vented 7826.766 7826.788 7826.788 7826.788 293 

Roof plate, vented, for cable entry 7826.669 7826.889 7826.889 7826.889 293 

Fan roof, modular see page 128 see page 128 see page 128 see page 128 

Fan mounting plate, active, with controller 7966.035 7988.035 7988.035 7988.035 127 

DC fan mounting plate with FCS speed control – 7858.488 7858.488 7858.488 124 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 293 

Base/plinth 

Base/plinth components, solid, 

front and rear 

8601.605 8601.805 8601.805 8601.805 255 

Gland plate, multi-piece – 7825.382 7825.382 7825.382 263 

Gland plate variants from page 263 from page 263 from page 263 from page 263 

Castors see page 256 see page 256 see page 256 see page 256 


482.6 mm (19″) mounting angles, cranked 

(for network technology) 

Punched section with mounting flange, interior 

installation rail systems 

 

(front) 

 

(front and rear) 

 


 


from page 295 from page 295 from page 295 from page 295 

Cable clamp rails, C rails see page 307 see page 307 see page 307 see page 307 

Earthing/potential equalisation 

Socket strips, power management from page 328 from page 328 from page 328 from page 328 

Component shelves from page 316 from page 316 from page 316 from page 316 

19″ installation system from page 364 from page 364 from page 364 from page 364 


CMC-TC system monitoring from page 158 from page 158 from page 158 from page 158 






33



T1 

B1 

T1 

B1 

H2 

H2 

H1 

H3 

H1 


H3 

B2 

T2 

Material: 

Sheet steel 












System frame with doors or rear 

panel, roof plate, 

vented base/plinth 100 mm, 




adaptor, 

4 spacers, for raising the roof, 


frame level, 


(105 x 70 mm, plastic), 



Version 3 

Glazed front door, vented, 180°, 

with comfort handle for semicylinder 

and security lock 

3524 E; 





angles 

at the front and rear, distance 

between levels pre-configured 

at 745 mm. 

L-shaped mounting angles 

screw-fastened to 2 or 3 depth 

stays respectively. 

Gland plate, one-piece, vented, 

with cable entry. 



Version 3 Version 3 Version 3 Version 3 Version 3 

U 24 42 42 47 47 

Width (B1) mm 1) 800 800 800 800 800 

Height (H1 + H2) mm 1) 1200 + 100 2000 + 100 2000 + 100 2200 + 100 2200 + 100 

Depth (T1) mm 1) 900 900 1000 900 1000 

Clearance width (B2) mm 712 712 712 712 712 

Clearance height (H3) mm 1112 1912 1912 2112 2112 

Clearance depth (T2) in mm 812 812 912 812 912 





7830.120 7830.300 7830.330 7830.320 2) 7830.340 2) 


2) 

Delivery times available on request. 

– 7830.350 7830.335 7830.370 2) 7830.380 2) 





Version 3 Version 3 Version 3 Version 3 Version 3 Page 


U 24 42 42 47 47 

Width (B1) mm 1) 800 800 800 800 800 

Height (H1 + H2) mm 1) 1200 + 100 2000 + 100 2000 + 100 2200 + 100 2200 + 100 

Depth (T1) mm 1) 900 900 1000 900 1000 



Model No. DK as bayed enclosure without side 

panels, including baying kit TS 8800.500 

7830.120 7830.300 7830.330 7830.320 2) 7830.340 2) 

– 7830.350 7830.335 7830.370 2) 7830.380 2) 

Doors 

Glazed front door/sheet steel rear door, vented 

Various door options from page 277 from page 277 from page 277 from page 277 from page 277 

Side panel 

Side panel, plug-in, IP 20 (7830.300 only) (7830.330 only) (7830.320 only) (7830.340 only) 


Internal latch for side panel, plug-in 7824.510 7824.510 7824.510 7824.510 7824.510 266 

Side panel, screw-fastened, IP 55 – 8109.235 8100.235 8129.235 – 265 

Baying from page 270 from page 270 from page 270 from page 270 from page 270 

Roof 

Roof plate for cable entry 

Roof plate, vented 7826.789 7826.789 7826.780 7826.789 7826.780 293 

Roof plate, vented, for cable entry 7826.899 7826.899 7826.809 7826.899 7826.809 293 

Fan roof, modular see page 128 see page 128 see page 128 see page 128 see page 128 

Fan mounting plate, active, with controller 7988.035 7988.035 7988.035 7988.035 7988.035 127 

DC fan mounting plate with FCS speed control 7858.488 7858.488 7858.488 7858.488 7858.488 124 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 7967.000 293 

Base/plinth 



8601.805 8601.805 8601.805 8601.805 8601.805 255 

Gland plate variants from page 263 from page 263 from page 263 from page 263 from page 263 

Castors see page 256 see page 256 see page 256 see page 256 see page 256 


482.6 mm (19″) mounting angles, L-shaped 

(for server technology) 

(front and rear) (front and rear) (front and rear) (front and rear) 

Punched section with mounting flange, interior 

installation rail systems 

from page 295 from page 295 from page 295 from page 295 from page 295 

Cable clamp rails, C rails see page 307 see page 307 see page 307 see page 307 see page 307 


Socket strips, power management from page 328 from page 328 from page 328 from page 328 from page 328 

Component shelves from page 316 from page 316 from page 316 from page 316 from page 316 

19″ installation system from page 364 from page 364 from page 364 from page 364 from page 364 

Cable management from page 341 from page 341 from page 341 from page 341 from page 341 

CMC-TC system monitoring from page 158 from page 158 from page 158 from page 158 from page 158 






35



T1 

B1 

T1 

B1 

H2 

H1 


H3 

B2 

T2 

H2 

H3 

H1 

H4 

Material: 

Sheet steel 












System frame with doors or rear 

panel, roof plate, 

vented base/plinth 100 mm, 




adaptor, 

4 spacers for raising the roof or 

vent panel, 


frame level, 


(105 x 70 mm, plastic), 



Version 4 




lock 3524 E; 




Empty enclosure for individual 

configuration, 482.6 mm (19″)/ 

metric partial installation or a 

combination of mounting angles/ 


frames supported. Gland plate 

at the front, fitted as an infill 

panel. 

Version 5 




lock 3524 E; 





angles at the front and rear, distance 

between levels 598 mm. 

L-shaped mounting angles 

screw-fastened to depth stays in 

the centre. Roof plate with cutout 

for fan insert and vent panel 

on spacers. Gland plate at the 

front, fitted as an infill panel. 

Version 6 




lock 3524 E. 

Sheet steel rear panel. 

Swing frame, large, with side 

trim panel for the installation of 

482.6 mm (19″) mounting components 

whilst utilising the full 

enclosure height (130°, 150 kg). 

Full installation at the front, rear 

panel, including swing frame 

installation kit SR 1995.825 up to 

150 kg total load capacity, 

static. Roof plate with cut-out for 

fan insert and vent panel on 

spacers. Gland plate, onepiece, 

vented, with cable entry. 



Version 4 Version 5 Version 6 

U 42 42 40 

Width (B1) mm 1) 800 800 800 

Height (H1 + H2) mm, (H1 + H2 + H4) mm 1) 2000 + 100 2000 + 100 + 25 2000 + 100 + 25 

Depth (T1) mm 1) 800 800 800 

Clearance width (B2) mm 712 712 712 

Clearance height (H3) mm 1912 1912 1912 

Clearance depth (T2) in mm 712 712 712 







3) Aluminium glazed door, delivery times available on request. 

7930.400 3) 7930.500 3) 7930.660 3) 

– 7930.550 2)3) 7930.670 2)3) 





Version 4 Version 5 Version 6 Page 


U – 42 40 

Width (B1) mm 1) 800 800 800 

Height (H1 + H2) mm, (H1 + H2 + H4) mm 1) 2000 + 100 2000 + 100 + 25 2000 + 100 + 25 

Depth (T1) mm 1) 800 800 800 





7930.400 7930.500 7930.660 

– 7930.550 2) 7930.670 2) 

Doors 

Designer glazed front door/sheet steel rear door – 

Designer glazed front door/sheet steel rear panel – – 

Various door options from page 277 from page 277 from page 277 

180° hinges for sheet steel rear door 8800.190 8800.190 – 288 

Side panel 

Side panel, plug-in, IP 20 (7930.500 only) (7930.660 only) 


Internal latch for side panel, plug-in 7824.510 7824.510 7824.510 266 

Side panel, screw-fastened, IP 55 8108.235 8108.235 8108.235 265 

Baying from page 270 from page 270 from page 270 

Roof 

Roof plate for cable entry 7826.885 7826.885 292 

Roof plate, vented 7826.788 7826.788 7826.788 293 

Roof plate, vented, for cable entry 7826.889 7826.889 7826.889 293 

Fan roof, modular see page 128 

 

 

(without fan insert) (without fan insert) 

Fan mounting plate, active, with controller 7988.035 – – 127 

DC fan mounting plate with FCS speed control 7858.488 7858.488 – 124 

Spacers, 50 mm 7967.000 – – 293 

Base/plinth 



8601.805 8601.805 8601.805 255 

Gland plate, multi-piece 7825.382 7825.382 – 263 

Gland plate variants from page 263 from page 263 from page 263 

Castors see page 256 see page 256 see page 256 


482.6 mm (19″) mounting angles, L-shaped 

(for server technology) 

from page 364 

 


19″ large swing frame 

(40 U) 

Punched section with mounting flange, interior installation rail systems from page 295 from page 295 from page 295 

Cable clamp rails, C rails see page 307 see page 307 see page 307 


Socket strips, power management from page 328 from page 328 from page 328 

Component shelves from page 316 from page 316 from page 316 

19″ installation system from page 364 from page 364 from page 364 

Cable management from page 341 from page 341 from page 341 

CMC-TC system monitoring from page 158 from page 158 from page 158 






37


Network enclosures, based on Rittal TS 8, types 1 and 2 

T1 

B1 

T1 

B1 


H2 

B2 

H1 

H1 

T2 

Type 1 


front (180°), with 3 mm singlepane 

safety glass, comfort 

handle for semi-cylinder and 

security lock 3524 E; 

sheet steel door at the rear 

(130°) with handle and security 

lock 3524 E. 

Type 2 

Sheet steel door at front (180°), 



3524 E; 



lock 3524 E. 

Material: 

Sheet steel 




Doors and roof: Dipcoat-primed, 


Base plates and punched 

sections with mounting flanges: 



Enclosure frame with doors, 

roof plate, multi-piece gland 

plate, 2 punched sections with 

mounting flanges in the enclosure 

depth. 

Approvals, 

see page 402. 



U 15 20 20 24 24 24 24 24 

Width (B1) mm 1) 600 600 800 600 800 800 800 800 

Height (H1) mm 1) 800 1000 1000 1200 1200 1200 1200 1200 

Depth (T1) mm 1) 600 600 600 600 600 800 900 1000 

Clearance width (B2) mm 512 512 712 512 712 712 712 712 

Clearance height (H2) mm 712 912 912 1112 1112 1112 1112 1112 

Clearance depth (T2) mm 512 512 512 512 512 712 812 912 

Model No. DK, 

type 1 with designer glazed door 

at the front 

Model No. DK, 

type 2 with sheet steel door 

at the front 

7920.100 3) 7920.200 3) 7920.240 2)3) 7920.300 3) 7920.340 2)3) 7920.350 3) 7920.355 3) 7920.360 2)3) 

7821.100 7821.200 7821.240 2) 7821.300 7821.340 – 7821.355 – 

U 29 29 29 33 33 33 38 38 

Width (B1) mm 1) 600 600 800 600 600 800 600 600 

Height (H1) mm 1) 1400 1400 1400 1600 1600 1600 1800 1800 

Depth (T1) mm 1) 600 800 600 600 800 600 600 800 

Clearance width (B2) mm 512 512 712 712 512 712 712 512 

Clearance height (H2) mm 1312 1312 1312 1512 1512 1512 1512 1712 

Clearance depth (T2) mm 512 712 512 512 712 512 512 712 

Model No. DK, 

type 1 with designer glazed door 7920.400 2)3) 7920.410 3) 7920.440 2)3) 7920.500 3) 7920.510 3) 7920.540 2)3) 7920.600 3) 7920.610 3) 

at the front 

Model No. DK, 


7821.400 2) 7821.410 7821.440 2) 7821.500 7821.510 7821.540 2) 7821.600 7821.610 

at the front 

1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 


3) Glazed aluminium door, delivery times available on request. 




Network enclosures, based on Rittal TS 8, types 1 and 2 

T1 

B1 

T1 

B1 

H2 

B2 

H1 

H1 


T2 

Type 1 


front (180°), with 3 mm singlepane 

safety glass, comfort 

handle for semi-cylinder and 

security lock 3524 E; 



lock 3524 E. 

Type 2 

Sheet steel door at front (180°), 



3524 E; 



lock 3524 E. 

Material: 

Sheet steel 




Doors and roof: Dipcoat-primed, 


Base plates and punched 




Enclosure frame with doors, 

roof plate, multi-piece gland 

plate, 2 punched sections with 

mounting flanges in the enclosure 

depth. 

Approvals, 

see page 402. 



U 38 38 38 38 42 42 42 42 42 

Width (B1) mm 1) 600 800 800 800 600 600 600 600 800 

Height (H1) mm 1) 1800 1800 1800 1800 2000 2000 2000 2000 2000 

Depth (T1) mm 1) 900 600 800 1000 600 800 900 1000 600 

Clearance width (B2) mm 512 712 712 712 712 512 512 512 512 

Clearance height (H2) mm 1712 1712 1712 1712 1912 1912 1912 1912 1912 

Clearance depth (T2) mm 812 512 712 912 512 712 812 912 512 

Model No. DK, 

type 1 with designer glazed door 

at the front 

Model No. DK, 


at the front 

7920.620 3) 7920.640 3) 7920.650 3) 7920.670 3) 7920.700 3) 7920.710 2)3) 7920.720 3) 7920.730 3) 7920.740 3) 

7821.620 2) 7821.640 2) 7821.650 7821.670 2) 7821.700 7821.710 2) 7821.720 7821.730 7821.740 

U 42 42 42 47 47 47 47 47 47 

Width (B1) mm 1) 800 800 800 600 600 800 800 800 800 

Height (H1) mm 1) 2000 2000 2000 2200 2200 2200 2200 2200 2200 

Depth (T1) mm 1) 800 900 1000 600 800 600 800 900 1000 

Clearance width (B2) mm 712 712 712 712 512 512 712 712 712 

Clearance height (H2) mm 1912 1912 1912 2112 2112 2112 2112 2112 2112 

Clearance depth (T2) mm 712 812 912 512 712 512 712 812 912 

Model No. DK, 

type 1 with designer glazed door 7920.750 3) 7920.760 3) 7920.770 3) 7920.800 3) 7920.810 3) 7920.840 3) 7920.850 3) 7920.860 3) 7920.870 3) 

at the front 

Model No. DK, 

type 2 with sheet steel door 7821.750 7821.760 7821.770 7821.800 7821.810 7821.840 2) 7821.850 7821.860 2) 7821.870 

at the front 



3) Glazed aluminium door, delivery times available on request. 



39


Network enclosures, based on Rittal TS 8, 15 – 20 U 

Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Page 


U 15 20 20 

Width (B1) mm 1) 600 600 800 

Height (H1) mm 1) 800 1000 1000 

Depth (T1) mm 1) 600 600 600 

Model No. DK 7920.100 7821.100 7920.200 7821.200 7920.240 2) 7821.240 2) 

Doors 

Designer glazed front door/ 

sheet steel rear door 

– – – 

Sheet steel front door/sheet steel rear door – – – 

Various door options from page 277 from page 277 from page 277 

180° hinges for sheet steel rear door 8800.190 8800.190 8800.190 288 

Side panel 

Side panel, plug-in, IP 20 7824.086 7824.106 7824.106 266 

Lock for side panel, plug-in, 3524 E 7824.500 7824.500 7824.500 266 

Internal latch for side panel, plug-in 7824.510 7824.510 7824.510 266 

Side panel, screw-fastened, IP 55 8173.235 8174.235 8174.235 265 

Baying from page 270 from page 270 from page 270 

Roof 

Solid roof plate 

Roof plate, vented 7826.766 7826.766 7826.786 293 

Roof plate for cable entry 7826.665 7826.665 7826.865 292 

Roof plate, vented, for cable entry 7826.669 7826.669 7826.869 293 

Fan mounting plate, active, with controller 7966.035 7966.035 7986.035 127 

Fan roof, modular see page 128 see page 128 see page 128 

Spacers, 20 mm 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 293 

Climate control see page 123 see page 123 see page 123 

Base/plinth 

Base/plinth components, vented, 

front and rear, H = 100 mm 

7825.601 7825.601 7825.601 255 



8601.605 8601.605 8601.805 255 

Base/plinth trim panels, side, H = 100 mm 8601.065 8601.065 8601.065 255 

Gland plate variants from page 263 from page 263 from page 263 

Castors see page 256 see page 256 see page 256 




7827.080 7827.100 7827.100 364 

482.6 mm (19″) mounting angles, 

L-shaped (for server technology) 

7827.081 7827.101 7827.101 364 

482.6 mm (19″) mounting frame 

(for server and network technology) 

– – – 

Depth stays for mounting angles 8612.060 8612.060 7827.600 299/369 

Installation brackets for mounting angles – – 7827.480 369 

Cable clamp rails see page 307 see page 307 see page 307 

Earthing/potential equalisation from page 337 from page 337 from page 337 

Socket strips/power management from page 328 from page 328 from page 328 

Component shelves from page 316 from page 316 from page 316 

19″ installation system from page 364 from page 364 from page 364 

Cable management from page 341 from page 341 from page 341 

CMC-TC system monitoring from page 158 from page 158 from page 158 


1) 

All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 


Accessories Page 252 



Network enclosures, based on Rittal TS 8, 24 U 

Type 1 Type 2 Type 1 Type 2 Type 1 Type 1 Type 2 Type 1 Page 


U 24 24 24 24 24 

Width (B1) mm 1) 600 800 800 800 800 

Height (H1) mm 1) 1200 1200 1200 1200 1200 

Depth (T1) mm 1) 600 600 800 900 1000 

Model No. DK 7920.300 7821.300 7920.340 2) 7821.340 7920.350 7920.355 7821.355 7920.360 2) 

Doors 



– – – 

Sheet steel front door/sheet steel rear 

door 

– – – – – 


180° hinges for sheet steel rear door 8800.190 8800.190 8800.190 8800.190 8800.190 288 

Side panel 

Side panel, plug-in, IP 20 7824.126 7824.126 7824.128 7824.129 7824.120 266 

Lock for side panel, plug-in, 3524 E 7824.500 7824.500 7824.500 7824.500 – 266 

Internal latch for side panel, plug-in 7824.510 7824.510 7824.510 7824.510 – 266 

Side panel, screw-fastened, IP 55 8170.235 8170.235 8175.235 – 8176.235 265 


Roof 



Roof plate for cable entry 7826.665 7826.865 7826.885 7826.895 7826.805 292 

Roof plate, vented, for cable entry 7826.669 7826.869 7826.889 7826.899 7826.809 293 

Fan mounting plate, active, with controller 7966.035 7986.035 7988.035 7988.035 7988.035 127 


Spacers, 20 mm 2423.000 2423.000 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 7967.000 293 

Climate control see page 123 see page 123 see page 123 see page 123 see page 123 

Base/plinth 



7825.601 7825.801 7825.801 7825.801 7825.801 255 



8601.605 8601.805 8601.805 8601.805 8601.805 255 

Base/plinth trim panels, side, H = 100 mm 8601.065 8601.065 8601.085 8601.095 8601.015 255 






7827.120 7827.120 7827.120 7827.120 7827.120 364 


L-shaped (for server technlogy) 

7827.121 7827.121 7827.121 7827.121 7827.121 364 



7856.713 7856.725 7856.725 7856.725 7856.725 366 

Depth stays for mounting angles 8612.060 7827.600 7827.800 7827.900 7827.000 299/369 

Installation brackets for mounting angles – 7827.480 7827.480 7827.480 7827.480 369 

Cable clamp rails see page 307 see page 307 see page 307 see page 307 see page 307 

Earthing/potential equalisation from page 337 from page 337 from page 337 from page 337 from page 337 

Socket strips/power management from page 328 from page 328 from page 328 from page 328 from page 328 










41





U 29 29 29 33 

Width (B1) mm 1) 600 600 800 600 

Height (H1) mm 1) 1400 1400 1400 1600 

Depth (T1) mm 1) 600 800 600 600 

Model No. DK 7920.400 2) 7821.400 2) 7920.410 7821.410 7920.440 2) 7821.440 2) 7920.500 7821.500 

Doors 



– – – – 


door 

– – – – 



Side panel 

Side panel, plug-in, IP 20 7824.146 7824.148 7824.146 7824.166 266 

Lock for side panel, plug-in, 3524 E 7824.500 7824.500 7824.500 7824.500 266 




Roof 



Roof plate for cable entry 7826.665 7826.685 7826.865 7826.665 292 




Spacers, 20 mm 2423.000 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 293 

Climate control see page 123 see page 123 see page 123 see page 123 

Base/plinth 



7825.601 7825.601 7825.801 7825.601 255 



8601.605 8601.605 8601.805 8601.605 255 

Base/plinth trim panels, side, H = 100 mm 8601.065 8601.085 8601.065 8601.065 255 






7827.140 7827.140 7827.140 7827.160 364 



7827.141 7827.141 7827.141 7827.161 364 



– – – – 

Depth stays for mounting angles 8612.060 8612.080 7827.600 8612.060 299/369 

Installation brackets for mounting angles – – 7827.480 – 369 

Cable clamp rails see page 307 see page 307 see page 307 see page 307 

Earthing/potential equalisation from page 337 from page 337 from page 337 from page 337 

Socket strips/power management from page 328 from page 328 from page 328 from page 328 














U 33 33 38 38 

Width (B1) mm 1) 600 800 600 600 

Height (H1) mm 1) 1600 1600 1800 1800 

Depth (T1) mm 1) 800 600 600 800 

Model No. DK 7920.510 7821.510 7920.540 2) 7821.540 2) 7920.600 7821.600 7920.610 7821.610 

Doors 



– – – – 


door 

– – – – 



Side panel 






Roof 







Spacers, 20 mm 2423.000 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 293 


Base/plinth 



7825.601 7825.801 7825.601 7825.601 255 



8601.605 8601.805 8601.605 8601.605 255 

Base/plinth trim panels, side, H = 100 mm 8601.085 8601.065 8601.065 8601.085 255 






7827.160 7827.160 7827.180 7827.180 364 



7827.161 7827.161 7827.181 7827.181 364 



– – 7856.716 7856.716 366 


Installation brackets for mounting angles – 7827.480 – – 369 













43





U 38 38 38 38 

Width (B1) mm 1) 600 800 800 800 

Height (H1) mm 1) 1800 1800 1800 1800 

Depth (T1) mm 1) 900 600 800 1000 

Model No. DK 7920.620 7821.620 2) 7920.640 7821.640 2) 7920.650 7821.650 7920.670 7821.670 2) 

Doors 



– – – – 


door 

– – – – 



Side panel 






Roof 







Spacers, 20 mm 2423.000 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 293 


Base/plinth 



7825.601 7825.801 7825.801 7825.801 255 



8601.605 8601.805 8601.805 8601.805 255 

Base/plinth trim panels, side 

H = 100 mm 

8601.095 8601.065 8601.085 8601.015 255 






7827.180 7827.180 7827.180 7827.180 364 



7827.181 7827.181 7827.181 7827.181 364 



7856.716 7856.728 7856.728 7856.728 366 


Installation brackets for mounting angles – 7827.480 7827.480 7827.480 369 















Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Page 


U 42 42 42 42 42 

Width (B1) mm 1) 600 600 600 600 800 

Height (H1) mm 1) 2000 2000 2000 2000 2000 

Depth (T1) mm 1) 600 800 900 1000 600 

Model No. DK 7920.700 7821.700 7920.710 7821.710 7920.720 7821.720 7920.730 7821.730 7920.740 7821.740 

Doors 



– – – – – 

Sheet steel front door/ 


– – – – – 


180° hinges for sheet steel rear door 8800.190 8800.190 8800.190 8800.190 8800.190 288 

Side panel 


Lock for side panel, plug-in, 3524 E 7824.500 7824.500 7824.500 7824.500 7824.500 266 

Internal latch for side panel, plug-in 7824.510 7824.510 7824.510 7824.510 7824.510 266 

Side panel, screw-fastened, IP 55 8106.235 8108.235 8109.235 8100.235 8106.235 265 


Roof 




Roof plate, vented, 

for cable entry 

7826.669 7826.689 7826.699 7826.609 7826.869 293 

Fan mounting plate, active, 

with controller 

7966.035 7968.035 7968.035 7968.035 7986.035 127 


Spacers, 20 mm 2423.000 2423.000 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 7967.000 293 


Base/plinth 



7825.601 7825.601 7825.601 7825.601 7825.801 255 



8601.605 8601.605 8601.605 8601.605 8601.805 255 


H = 100 mm 

8601.065 8601.085 8601.095 8601.015 8601.065 255 





cranked (for network technology) 

7827.200 7827.200 7827.200 7827.200 7827.200 364 



7827.201 7827.201 7827.201 7827.201 7827.201 364 



7856.719 7856.719 7856.719 7856.719 7856.731 366 


Installation brackets 

for mounting angles 

– – – – 7827.480 369 












45



Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Type 1 Type 2 Page 


U 42 42 42 47 47 

Width (B1) mm 1) 800 800 800 600 600 

Height (H1) mm 1) 2000 2000 2000 2200 2200 

Depth (T1) mm 1) 800 900 1000 600 800 

Model No. DK 7920.750 7821.750 7920.760 7821.760 7920.770 7821.770 7920.800 7821.800 7920.810 7821.810 

Doors 



– – – – – 

Sheet steel front door/ 


– – – – – 


180° hinges 

for sheet steel rear door 

8800.190 8800.190 8800.190 8800.190 8800.190 288 

Side panel 


Lock for side panel, plug-in, 3524 E 7824.500 7824.500 7824.500 7824.500 7824.500 266 

Internal latch 

for side panel, plug-type 

7824.510 7824.510 7824.510 7824.510 7824.510 266 

Side panel, screw-fastened, IP 55 8108.235 8109.235 8100.235 8126.235 8128.235 265 


Roof 




Roof plate, vented, 

for cable entry 

7826.889 7826.899 7826.809 7826.669 7826.689 293 

Fan mounting plate, active, 

with controller 

7988.035 7988.035 7988.035 7966.035 7968.035 127 


Spacers, 20 mm 2423.000 2423.000 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 7967.000 293 


Base/plinth 



7825.801 7825.801 7825.801 7825.601 7825.601 255 



8601.805 8601.805 8601.805 8601.605 8601.605 255 


H = 100 mm 

8601.085 8601.095 8601.015 8601.065 8601.085 255 





cranked (for network technology) 

7827.200 7827.200 7827.200 7827.220 7827.220 364 



7827.201 7827.201 7827.201 7827.221 7827.221 364 



7856.731 7856.731 7856.731 7856.722 7856.722 366 


Installation brackets 

for mounting angles 

7827.480 7827.480 7827.480 – – 369 
















U 47 47 47 47 

Width (B1) mm 1) 800 800 800 800 

Height (H1) mm 1) 2200 2200 2200 2200 

Depth (T1) mm 1) 600 800 900 1000 

Model No. DK 7920.840 7821.840 2) 7920.850 7821.850 7920.860 7821.860 2) 7920.870 7821.870 

Doors 



– – – – 


door 

– – – – 



Side panel 





7824.510 7824.510 7824.510 7824.510 266 

Side panel, screw-fastened, IP 55 8126.235 8128.235 8129.235 – 265 


Roof 







Spacers, 20 mm 2423.000 2423.000 2423.000 2423.000 293 

Spacers, 50 mm 7967.000 7967.000 7967.000 7967.000 293 


Base/plinth 



7825.801 7825.801 7825.801 7825.801 255 



8601.805 8601.805 8601.805 8601.805 255 


H = 100 mm 

8601.065 8601.085 8601.095 8601.015 255 






7827.220 7827.220 7827.220 7827.220 364 


L-shaped (for server technlogy) 

7827.221 7827.221 7827.221 7827.221 364 



7856.734 7856.734 7856.734 7856.734 


Installation brackets for mounting angles 7827.480 7827.480 7827.480 7827.480 369 










2) 




47


Network enclosures, based on Rittal flexRack(i), pre-configured 

T1 

B1 


B2 

H2 

H1 

T2 

H2 

Material: 

Vertical frame sections: 

Extruded aluminium section 

Base, roof frame, base/plinth, 

panels: Sheet steel 



Spray-finished in RAL 7035 

Frame sections and doors: 

RAL 9006 

Lock panels: RAL 7035 

Viewing window: Tinted, grey 

Gland plates, 482.6 mm (19″) 




Multi-platform frame FR(i) with 

designer glazed door at front 

(130°), TS sheet steel door at 

rear (130°). 

Roof plate, side panels, vented 

base/plinth, gland plate, interior 

installation depending on 

design, see table on page 49. 

Earthing of all enclosure panels, 

comfort handle for semi-cylinders 

at the front, swivel handle 

at the rear, with security lock 

3524 E. 

Property rights: 

German patent no. 103 11 376 

German Registered Design 

no. 403 04 312 

British Registered Design 

no. 301 54 31 



U 11 11 24 42 42 

Width (B1) mm 1) 600 600 600 800 800 

Height (H1 + H2) mm 1) 600 600 1200 2000 + 100 2000 + 100 

Depth (T1) mm 1) 805 1005 1005 805 1005 

Depth absolute, including handles and roof curvature 

(T1) mm + 74.5 mm 

879.5 1079.5 1079.5 879.5 1079.5 

Model No. FR(i) as single enclosure including 2 side panels 7855.480 7855.500 7855.510 7855.550 7855.570 

Model No. FR(i) as bayed enclosure without side panels, 

including baying kit 

– – – 7855.540 7855.560 2) 






Network enclosures, based on Rittal flexRack(i), pre-configured 


U 11 11 24 42 42 Page 

Width (B1) mm 1) 600 600 600 800 800 

Height (H1 + H2) mm 1) 600 600 1200 2000 + 100 2000 + 100 

Depth (T1) mm 1) 805 1005 1005 805 1005 

Depth absolute, including handles and roof curvature 

(T1) mm + 74.5 mm 

Model No. FR(i) as single enclosure 

including 2 side panels 

Model No. FR(i) as bayed enclosure 

without side panels, including baying kit 

879.5 1079.5 1079.5 879.5 1079.5 

7855.480 7855.500 7855.510 7855.550 7855.570 

– – – 7855.540 7855.560 2) 

Doors 

Designer glazed front door/TS sheet steel rear door 

Side panel 

Side panel, plug-type 

 

 

 


(7855.550 only) (7855.570 only) 

266 

Internal latch for side panel, plug-in 266 


Roof 

Designer roof plate, solid – – 

Designer roof plate for cable entry, two-piece – – – 

Various roof plate options, based on TS 8 from page 292 from page 292 from page 292 from page 292 from page 292 

Base/plinth 

Base/plinth components solid, front and rear 8601.605 8601.605 8601.605 8601.805 8601.805 255 

Base/plinth components, vented, front and rear 7825.601 7825.601 7825.601 255 

Base/plinth trim, side 8601.085 8601.015 8601.015 255 

Base/gland plate, mounted at front as infill panel, 

rear part open 

– – – 

Gland plate, one-piece, vented – – 263 

Gland plate variants, based on TS 8 from page 263 from page 263 from page 263 from page 263 from page 263 


482.6 mm (19″) mounting angles, L-shaped at front – – 364 

Additional 482.6 mm (19″) mounting angles, L-shaped 7856.800 7856.800 7856.803 7856.809 7856.809 364 

482.6 mm (19″) mounting frames, front and rear – – – 366 

Additional 482.6 mm (19″) mounting frame 7856.710 7856.710 7856.713 7856.719 7856.719 366 

System punched section, interior installation of rail systems from page 364 from page 364 from page 364 from page 364 from page 364 






4 hammerhead rails including system adaptor, 

supplied loose, for cable clamping in the enclosure depth 

– – – 

10 cable shunting rings 105 x 70 mm, supplied loose – – – 355 

50 cage nuts and hexagon socket screws, supplied loose – – – 314 





2) 




49


Network enclosures based on Rittal flexRack(i) 

T1 

B1 


H1 

Material: 


Extruded aluminium section 

Base, roof frame, panels: 

Sheet steel 




Frame sections and doors: 

RAL 9006 

Lock panels: RAL 7035 

Viewing window: Tinted, grey 

Gland plates: Zinc-plated, 

passivated 


Multi-platform frame FR(i) with 

designer glazed front door 

(130°), TS sheet steel rear door 

(130°), solid roof plate, multipiece 

gland plate, levelling feet, 

comfort handle for semi-cylinder 

at the front, swivel handle 

at the rear, with security lock 

3524 E. 



German Registered Design 

no. 403 04 312 

British Registered Design 

no. 301 54 31 



U 11 11 24 24 38 42 42 47 

Width (B1) mm 1) 600 600 600 600 600 600 600 600 

Height (H1) mm 1) 600 600 1200 1200 1800 2000 2000 2200 

Depth (T1) mm 1) 605 1005 605 1005 605 605 1005 1005 

Depth absolute, including 

handles and roof curvature 

679.5 1079.5 679.5 1079.5 679.5 679.5 1079.5 1079.5 

(T1) mm + 74.5 mm 

Model No. FR(i) 7855.610 2) 7855.620 2) 7855.630 2) 7855.640 2) 7855.650 2) 7855.660 2) 7855.670 2) 7855.680 2) 

U 24 38 42 42 47 47 

Width (B1) mm 1) 800 800 800 800 800 800 

Height (H1) mm 1) 1200 1800 2000 2000 2200 2200 

Depth (T1) mm 1) 805 805 805 1005 805 1005 


handles and roof curvature 

879.5 879.5 879.5 1079.5 879.5 1079.5 

(T1) mm + 74.5 mm 

Model No. FR(i) 7855.690 2) 7855.700 2) 7855.710 7855.720 7855.730 2) 7855.740 2) 

1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 2) Delivery times available on request. 






U 11 11 24 24 38 42 42 47 Page 

Width (B1) mm 1) 600 600 600 600 600 600 600 600 

Height (H1) mm 1) 600 600 1200 1200 1800 2000 2000 2200 

Depth (T1) mm 1) 605 1005 605 1005 605 605 1005 1005 


handles and roof curvature 679.5 1079.5 679.5 1079.5 679.5 679.5 1079.5 1079.5 

(T1) mm + 74.5 mm 

Model No. FR(i) 7855.610 2) 7855.620 2) 7855.630 2) 7855.640 2) 7855.650 2) 7855.660 2) 7855.670 2) 7855.680 2) 

Doors 


TS sheet steel rear door 

 

Side panel 



7856.660 7856.663 7856.666 7856.672 7856.675 7856.681 7856.687 7856.696 266 



7856.700 7856.700 7856.700 7856.700 7856.700 7856.700 7856.700 7856.700 266 

Baying from p. 270 from p. 270 from p. 270 from p. 270 from p. 270 from p. 270 from p. 270 from p. 270 

Roof 

Designer roof plate, solid 

Various roof plate options, 

based on TS 8 

from p. 292 from p. 292 from p. 292 from p. 292 from p. 292 from p. 292 from p. 292 from p. 292 

Base/plinth 



8601.605 8601.605 8601.605 8601.605 8601.605 8601.605 8601.605 8601.605 255 



7825.601 7825.601 7825.601 7825.601 7825.601 7825.601 7825.601 7825.601 255 

Base/plinth trim, side 8601.065 8601.015 8601.065 8601.015 8601.065 8601.065 8601.015 8601.015 255 

Gland plate, multi-piece 

Gland plate variants, 

based on TS 8 




L-shaped 

7856.800 7856.800 7856.803 7856.803 7856.806 7856.809 7856.809 7856.812 364 

482.6 mm (19″) mounting frame 7856.710 7856.710 7856.713 7856.713 7856.716 7856.719 7856.719 7856.722 366 

Punched sections with mounting 

flanges, interior installation, from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 

rail systems 

Cable clamp rails from p. 307 from p. 307 from p. 307 from p. 307 from p. 307 from p. 307 from p. 307 from p. 307 

Earthing/potential equalisation from p. 337 from p. 337 from p. 337 from p. 337 from p. 337 from p. 337 from p. 337 from p. 337 

Socket strips/ 

power management 


Component shelves from p. 316 from p. 316 from p. 316 from p. 316 from p. 316 from p. 316 from p. 316 from p. 316 

19″ installation system from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 from p. 364 

Cable management from p. 341 from p. 341 from p. 341 from p. 341 from p. 341 from p. 341 from p. 341 from p. 341 

CMC-TC system monitoring from p. 158 from p. 158 from p. 158 from p. 158 from p. 158 from p. 158 from p. 158 from p. 158 


1) 





51




U 24 38 42 42 47 47 Page 

Width (B1) mm 1) 800 800 800 800 800 800 

Height (H1) mm 1) 1200 1800 2000 2000 2200 2200 

Depth (T1) mm 1) 805 805 805 1005 805 1005 

Depth absolute, including handles and 

roof curvature (T1) mm + 74.5 mm 

879.5 879.5 879.5 1079.5 879.5 1079.5 

Model No. FR(i) 7855.690 2) 7855.700 2) 7855.710 7855.720 7855.730 2) 7855.740 2) 

Doors 

Designer glazed front door/TS sheet steel rear door 

Side panel 

Side panel, plug-type 


7856.669 7856.678 7856.684 7856.687 7856.693 7856.696 266 

Internal latch for side panel, plug-in 7856.700 7856.700 7856.700 7856.700 7856.700 7856.700 266 

Baying from page 270 from page 270 from page 270 from page 270 from page 270 from page 270 

Roof 

Designer roof plate, solid 

Various roof plate options, based on TS 8 from page 292 from page 292 from page 292 from page 292 from page 292 from page 292 

Base/plinth 

Base/plinth components solid, front and rear 8601.805 8601.805 8601.805 8601.805 8601.805 8601.805 255 

Base/plinth components, vented, front and rear 7825.801 7825.801 7825.801 7825.801 7825.801 7825.801 255 

Base/plinth trim, side 8601.085 8601.085 8601.085 8601.015 8601.085 8601.015 255 

Gland plate, multi-piece 

Gland plate variants, based on TS 8 from page 263 from page 263 from page 263 from page 263 from page 263 from page 263 


482.6 mm (19″) mounting frame 7856.725 7856.728 7856.731 7856.731 7856.734 7856.734 366 

System punched section, interior installation of rail 

systems 

from page 364 from page 364 from page 364 from page 364 from page 364 from page 364 

Cable clamp rails from page 307 from page 307 from page 307 from page 307 from page 307 from page 307 

Earthing/potential equalisation from page 337 from page 337 from page 337 from page 337 from page 337 from page 337 

Socket strips/power management from page 328 from page 328 from page 328 from page 328 from page 328 from page 328 

Component shelves from page 316 from page 316 from page 316 from page 316 from page 316 from page 316 

19″ installation system from page 364 from page 364 from page 364 from page 364 from page 364 from page 364 

Cable management from page 341 from page 341 from page 341 from page 341 from page 341 from page 341 

CMC-TC system monitoring from page 158 from page 158 from page 158 from page 158 from page 158 from page 158 


1) 


2) 





RNC enclosure 

T1 

T2 

B 

H 


Rittal-Net.com is the passive 

platform for the fast, futureproof 

assembly of communications 

networks in the small 

office sector. 

Three enclosures, for installation 

of connection cables, patch 

cables and distributor panels, 

are tailored to the specific criteria 

of the SOHO market. Work 

groups may be set up quickly 

and easily. 

Material: 

1.5 mm sheet steel 

Smoked grey acrylic glazing 

Corner sections, aluminium 

Corner feet made from thermoplastic 

foam 

Colour: 

Enclosure panels: RAL 7035 

Corner sections: RAL 7030 



U Packs of 4 8 6 Page 

Width (B) mm 342 342 342 

Height (H) mm 215 390 490 

Depth (T1) mm 280 280 400 

Max. installation depth (T2) mm 250 250 335 

Model No. DK empty enclosure, individual 1 7870.100 7870.200 7870.300 

Design 

42 HP 

( 1 / 2 19″) 

42 HP 

( 1 / 2 19″) 

Installation position horizontal horizontal vertical 

Accessory kits 

Data distributor, including patch cable 

VF Cat 5, 8 ports, STP, LSA, including 8 patch cables with RJ 45 connector 

on both sides, extruded insulation, cable design in yellow, cable length 0.25 m 

VF Cat 6, 24 ports, STP, LSA, including 12 patch cables with RJ 45 connector 

on both sides, extruded insulation, cable design in yellow, cable length 0.6 m 

1) 


84 HP 

(19″) 

1 7870.822 1) 7870.822 1) – 388 

1 – – 7870.830 388 



53


RNC universal enclosure 

T1 

B 


T2 

H 

A compact contemporary 

design in black, with integral 

glazed door (tinted safety 

glass). Centered lock, the side 

panels cannot be removed 

whilst the front door is latched. 

Suitable for use as a stand-alone 

model and for wall mounting. 

The plug-in side panels ensure 

rapid access and plenty of 

scope when mounting. Optional 

1 / 2 19″, 10″ or 19″ components 

RNC can be bayed, both horizontally 

and vertically, using the 

connector kit (supplied loose). 

Passive ventilation via openings 

in the rear frame, roof and the 

gland plate. Fan expansion kit, 

optional (DK 7980.100). 

Cable entry optionally via the 

rear panel, roof or base. 

All frame parts and panels are 

prepared for earthing. 

Material: 

Sheet steel, single-pane safety 

glass 

Colour: 

Black, similar to RAL 9011 


Enclosure with glazed door, 

baying kit, 

brush strips for cable entry, 

482.6 mm (19″) mounting level 

at front. 


German patents 

No. 10 210 481 

No. 10 210 482 



U 269.2 mm ( 1 / 2 19″) Packs of 10 Page 

U 482.6 mm (19″) 5 

Width (B) mm 350 

Height (H) mm 500 

Depth (T1) mm 350 

Max. installation depth (T2) mm 270 

Model No. DK 1 7870.350 

Accessories 

Socket strip 3-way, without switch 1 7240.110 328 

Socket strip 7-way, without switch, for 482.6 mm (19″) level 1 7240.210 328 

Socket strip 7-way, with switch, for 482.6 mm (19″) level 1 7240.220 328 

1 / 2 19″ component shelf, 1 U 1 7502.600 323 

1 

/ 2 19″ cable management panel, 1 U 1 7502.610 56 

1 / 2 19″ blanking panel, 1 U 2 7870.720 55 

1 / 2 19″ cable entry panel, 1 U 2 7870.730 56 

19″ blanking panel, 1 U 2 7151.035 392 



Combination rail, length 200 mm 6 7502.302 352 

Adaptor for 10″ system, 1 U 1 7870.760 56 

Adaptor for 10″ system, 4 U 1 7870.765 56 

Phillips-head screw M5, with plastic washer 100 2099.500 382 

Phillips-head screw M6, with plastic washer 100 2089.000 382 

Captive nuts M5, with contact 50 2094.500 381 

Captive nuts M6, with contact 50 2094.200 381 

Data distributors Page 57 



Accessories for RNC enclosures 

Base/plinth 

for RNC 

To accommodate a maximum of two 3-way socket 

strips DK 7240.110 and also as storage space for 

cables. 

Height: 60 mm. 

Material: 

Sheet steel 

Colour: 

RAL 7035 


4 levelling feet and 2/4 cable shunting rings. 

For RNC enclosures 

42 HP ( 1 / 2 19″) Model No. DK 

Width mm Depth mm 

342 280 7870.710 1) 

For RNC tower enclosures 

84 HP (19″) vertical Model No. DK 

Width mm Depth mm 

342 400 7870.715 1) 

1) 


Accessories: 

Socket strip, 

see page 328. 


Angle bracket 

for RNC 

With space for optimum cable routing behind the 

RNC. 

Material: 

Sheet steel 

Colour: 

RAL 7035 


Assembly parts 

For RNC enclosures 

42 HP ( 1 / 2 19″) Packs 

of 

Width 

mm 

Depth 

mm 

Model No. DK 

342 280 2 7870.701 

For RNC tower enclosures 

84 HP (19″) vertical Packs 

of 

Width 

mm 

Depth 

mm 

Model No. DK 

342 400 2 7870.706 

Blanking panel 1 U, 

42 HP ( 1 / 2 19″) 

for RNC and RiCase 

As an extension cover. 

Material: 

Sheet steel 

Colour: 

RAL 7035 

Packs of 

Model No. DK 

2 7870.720 


55


Accessories for RNC enclosures 


Cable management panel 1U 

42 HP ( 1 / 2 19″) 

for RNC 

For horizontal cable routing. 

Material: 

Sheet steel 

Colour: 

RAL 7035 


Tray and 5 shunting rings. 

U 

Model No. DK 

1 7502.610 

Entry panel 1 U 

42 HP ( 1 / 2 19″) 

for RNC 

For entry of patch cables. Cut-out approximately 

227 x 30 mm. 

Material: 

Sheet steel 

Colour: 

RAL 7035 

Packs of 

Model No. DK 

2 7870.730 

Adaptor 

for RNC 

For installing 10″ components in 296.2 mm 

( 1 / 2 19″) enclosures. 

Material: 

Sheet steel 

Colour: 

RAL 7035 

U 

Model No. DK 

1 7870.760 

4 7870.765 



Wall-mounted enclosures, based on Rittal QuickBox, 6 – 12 U 

T2 

B2 

T1 

B1 

H1 

H1 

H2 

T1 

B1 


Perfect access during installation 

and servicing, thanks to a 

removable cover. 

Material: 

Wall mounting plate with 

mounting brackets: 


Enclosure cover: 


Door: Sheet steel door or glazed 

door with sheet steel frame and 

single-pane safety glass, 3 mm 


Enclosure: Powder-coated, 

RAL 7035 


Wall section: 

Pre-configured mounting 

bracket, 

brush strip for cable entry at the 

bottom/top, 

cable clamp rail 


consisting of base and cover 

tray with vent slots, brush strip 

for cable entry at the top/bottom, 

2 side security locks, sheet steel 

door/glazed door with security 

lock, 482.6 mm (19″) mounting 

angles, infinitely depth-variable. 


German patent 

No. 198 11 711 

German utility model 

No. 298 23 843 

European patent no. 1 064 709 

with validity for BE, ES, FR, GB, 

IT, NL, SE 

Taiwanese patent 

No. NI 123 288 

Russian patent no. 2190912 

Australian patent 

No. 733078 

South Korean patent 

No. 10-0375062 

US patent no. 6,435,364 



U P. of 6 6 6 9 9 12 12 12 Page 

Enclosure cover 

Wall section 

Width (B1) mm 600 600 600 600 600 600 600 600 

Height (H1) mm 362 362 362 495 495 628 628 628 

Depth (T1) mm 300 400 600 400 600 400 500 600 

Width (B2) mm 595 595 595 595 595 595 595 595 

Height (H2) mm 355 355 355 488 488 621 621 621 

Max. installation depth (T2) mm 247 347 547 347 547 347 447 547 

Model No. with glazed door 1 7502.013 7502.014 7502.016 7502.024 7502.026 7502.034 7502.035 7502.036 

Model No. with sheet steel door 1 – 7502.114 – 7502.124 7502.126 – – 7502.136 

Accessories 

Mounting angles, 482.6 mm (19″) 2 7502.201 7502.201 7502.201 7502.202 7502.202 7502.203 7502.203 7502.203 365 

Solid gland plate 2 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 346 

Wall mounting bracket, 10 mm 4 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 294 

Wall mounting bracket, 40 mm 4 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 294 

Combination rails for enclosure width 6 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 352 

Combination rails 

300/400 mm 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 352 

6 

for enclosure depth 

500/600 mm 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 352 

300 mm 10 1962.200 1962.200 1962.200 1962.200 1962.200 1962.200 1962.200 1962.200 377 

Slide rails 

400 mm 

7492.300 7492.300 7492.300 7492.300 7492.300 7492.300 7492.300 7492.300 383 


2 

500/600 mm 7492.400 7492.400 7492.400 7492.400 7492.400 7492.400 7492.400 7492.400 383 

Earthing kit 1 7502.240 7502.240 7502.260 7502.240 7502.260 7502.240 7502.260 7502.260 339 

Quick-release fastener 2 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 288 


Cable clamps 

for clamping to C rails and 

combination rails, 

see page 352. 

Splicing box 

for fibre-optic termination or 

fibre-optic distributor, 

see page 394. 

Accessories Page 252 Mounting angles Page 364 Wall mounting Page 290 Earthing Page 337 


57


Wall-mounted enclosures, based on Rittal QuickBox, 15 – 21 U 

T2 

B2 

H1 


T1 

B1 

H1 

H2 

T1 

B1 

Perfect access during installation 

and servicing, thanks to a 

removable cover. 

Material: 






Door: Sheet steel door or glazed 

door with sheet steel frame and 

single-pane safety glass, 3 mm 



RAL 7035 


Wall section: 

Pre-configured mounting 

bracket, 

brush strip for cable entry at the 

bottom/top, 

cable clamp rail 


consisting of base and cover 

tray with vent slots, brush strip 

for cable entry at the top/bottom, 

2 side security locks, sheet steel 

door/glazed door with security 

lock, 482.6 mm (19″) mounting 

angles, infinitely depth-variable. 


German patent 

No. 198 11 711 

German utility model 

No. 298 23 843 


with validity for BE, ES, FR, GB, 

IT, NL, SE 

Taiwanese patent 

No. NI 123 288 

Russian patent no. 2190912 

Australian patent 

No. 733078 

South Korean patent 

No. 10-0375062 

US patent no. 6,435,364 



U P. of 15 15 15 18 18 21 21 Page 


Wall section 

Width (B1) mm 600 600 600 600 600 600 600 

Height (H1) mm 762 762 762 895 895 1028 1028 

Depth (T1) mm 400 500 600 400 600 400 600 

Width (B2) mm 595 595 595 595 595 595 595 

Height (H2) mm 755 755 755 888 888 1021 1021 

Max. installation depth (T2) mm 347 447 547 347 547 347 547 

Model No. with glazed door 1 7502.044 7502.045 7502.046 7502.054 7502.056 7502.064 7502.066 

Model No. with sheet steel door 1 7502.144 – 7502.146 – – – 7502.166 

Accessories 

Mounting angles, 482.6 mm (19″) 2 7502.204 7502.204 7502.204 7502.205 7502.205 7502.206 7502.206 365 

Solid gland plate 2 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 7502.310 1) 346 

Wall mounting bracket, 10 mm 4 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 294 

Wall mounting bracket, 40 mm 4 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 294 

Combination rails for enclosure width 6 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 352 


300/400 mm 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 352 

6 


500/600 mm 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 352 

Slide rails 

400 mm 2 7492.300 7492.300 7492.300 7492.300 7492.300 7492.300 7492.300 383 


500/600 mm 2 7492.400 7492.400 7492.400 7492.400 7492.400 7492.400 7492.400 383 

Earthing kit 1 7502.240 7502.260 7502.260 7502.240 7502.260 7502.240 7502.260 339 

Quick-release fastener 2 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 288 


Cable management panel 

for all QuickBoxes from a height 

of 15 U, 

see page 358. 

Earthing kit 

for standardised earthing 

of the QuickBox. With fast-on 

connections, 

see page 339. 

Accessories Page 252 Cable routing Page 341 Lock systems Page 281 Patch panel Page 388 



Wall-mounted enclosures, based on Rittal QuickBox with vertical 482.6 mm (19″) level 

T2 

B2 

T1 

B1 

H1 

H2 


Optimum use of the interior 

space 

via side installation of the 

482.6 mm (19″) components. 

Status monitoring via side 

viewing window. 

Material: 





1.0 mm sheet steel with 

toughened safety glass, 

3 mm at the side 


Wall section: 

with pre-configured 482.6 mm 

(19″) mounting brackets for side 

accommodation of mounting 

components and brush strip for 

cable entry from the bottom and 

top. 





RAL 7035 


with side vent slots to support 

passive climate control. The 

enclosure is secured via two 

security locks positioned at the 

sides. 

U vertical Packs of 3 6 Page 


Wall section 

Width (B1) mm 600 600 

Height (H1) mm 631 631 

Depth (T1) mm 210 360 

Width (B2) mm 595 595 

Height (H2) mm 621 621 

Depth (T2) mm 198 348 

Model No. DK 1 7502.630 1) 7502.660 1) 

Accessories 

Gland plates, solid 2 7502.310 1) 7502.310 1) 346 

Wall mounting bracket, 10 mm 4 2508.010 2508.010 294 

Wall mounting bracket, 40 mm 4 2503.010 2503.010 294 

Combination rails for vertical mounting on the wall section QB 6 7502.304 7502.304 352 

Combination rails for horizontal mounting 6 7502.304 7502.304 352 

Mounting and cable management panel 

for cable routing and the attachment of small equipment 

1 7502.270 7502.270 358 

Mounting angles, 482.6 mm (19″) for front mounting, 12 U 2 7502.203 7502.203 365 


Blanking panel 

for toolless quick assembly 

see page 392. 

Wall mounting bracket 

at a distance of 10 mm or 

40 mm, 

see page 294. 

Accessories Page 252 Cable management Page 341 Gland plates Page 342 Earthing Page 337 


59


Wall-mounted enclosures, based on Rittal AE 

T1 

B 


T2 

H 

Wall-mounted distributor with 

infinitely depth-variable 

482.6 mm (19″) mounting level 

at the front. The ideal solution for 

small networks or corridor distributors. 

Max. achievable protection 

category of up to IP 55 (to 

EN 60 529/10.91) by replacing 

the cable entry brush with a 

gland plate. 

Material: 

Sheet steel 



RAL 7035 


1 wall-mounted distributor 

enclosure with sheet steel door, 

cam lock and double-bit insert. 

Brush strip for cable entry at the 

bottom, 

2 mounting angles, 482.6 mm 

(19″), depth-adjustable 

1 C rail for cable routing, 

1 metal bracket for optional 

accommodation of an earth rail 

or 482.6 mm (19″) socket strip. 

Available on request: 

● Fully modified wall-mounted 

distributors 

● Special designs 

Approvals, 

see page 402. 




Width (B) mm 600 600 600 

Height (H) mm 380 600 760 

Depth (T1) mm 350 350 350 

Max. installation depth (T2) mm 310 310 310 

Model No. DK 1 7641.000 7643.000 7645.000 

Accessories 

Plastic cable gland plates with pre-punched PG holes 5 2563.000 2563.000 2563.000 342 

Metal gland plates with pre-punched metric holes 1 2563.100 2563.100 2563.100 344 

Wall mounting bracket, 10 mm 4 2508.010 2508.010 2508.010 294 


Glazed door, 34 mm profile depth 1 2730.000 2731.000 2732.000 280 

Glazed door, 60 mm profile depth 1 2760.000 2761.000 2762.000 280 

Component shelf 2 U, static installation, 250 mm 1 7119.250 7119.250 7119.250 323 

Earth rail 1 7113.000 7113.000 7113.000 338 

Lock systems 

Plastic handle, version B, see page 286. 

Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 285, 

Earth rail 

for attaching to the rear bracket, 

see page 338. 

High protection category 

by exchanging the brush strip 

for metal gland plates, 

see page 344. 

Accessories Page 252 Socket strips Page 328 Cage nuts Page 314 Glazed doors Page 280 



Wall mounted enclosure, based on Rittal AE, with pull-out frame 

350 

600 

210 

450 

525 

600 


520 

Wall mounted distributor with 

482.6 mm (19″) pull-out frame. 

Side and front installation with 

482.6 mm (19″) components in 

a vertical mounting position. 

Horizontal installation also 

optionally supported at the front. 

Status monitoring via side viewing 

window. Pull-out frame may 

be removed for population via 

snap fastenings. Passive cooling 

via pre-configured outlet filter, 

may be upgraded to active. 

Optional accommodation of 

earth rail DK 7113.000 in a vertical 

position on the pull-out 

frame. 

Material: 

Sheet steel 



RAL 7035 

Pull-out frame zinc-plated, 

passivated. 


1 wall-mounted distributor 

enclosure with sheet steel door, 

cam locks and double-bit insert. 

Pull-out frame attached to 

telescopic slides. 

Outlet filter in enclosure base 

and on left-hand side. 

Viewing window on right-hand 

side. 

Combination rail for cable 

clamping behind the cable 

entry. Additional cable clamp 

rail for mounting on the pull-out 

frame. 

Protection category: 

IP 43 to EN 60 529/10.91 



distributors 




Width mm Packs of 600 Page 

Height mm 600 

Depth mm 350 

Model No. DK 1 7644.000 

Side 482.6 mm (19″) level, vertical 

4 U 

Front 482.6 mm (19″) level, vertical and horizontal 

10 U 

Accessories 

Plastic cable gland plates with pre-punched PG holes 5 2563.000 342 

Wall mounting bracket, 10 mm 4 2508.010 294 


Shelf 1 7644.400 1) 324 

Component shelf, 1 U 1 7119.140 322 

Earth rail, horizontal 1 7113.000 338 

Fan expansion kit 230 V AC (only for use at the bottom) 1 set 7980.100 127 

Fan expansion kit 48 V DC (only for use at the bottom) 1 set 7980.148 127 

Lock systems 

Plastic handle, version B, see page 286. 

Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 285. 


Active ventilation 

with the fan expansion kit in 

230 V AC or 48 V DC versions, 

see page 127. 

Shelf 

a support surface for small 

equipment, 

see page 324. 

Accessories Page 252 Component shelf Page 324 Touch-up pens Page 269 Telecoms mounting bracket Page 230 


61


Wall-mounted enclosures, based on Rittal EL, 3-part, pre-configured, depth 573 

H2 

H1 


T1 

T3 T2 

B1 

T4 

B2 

Material: 

Wall and hinged part: 

Sheet steel, 1.5 mm 

Viewing window: 

Toughened safety glass 3 mm 

Colour: 


Powder-coated, RAL 7035 

Glazed door: RAL 7035/7015 

(slate grey) 


IP 43 to EN 60 529/10.91 when 

using solid gland plates. 


Wall section: 

with vertical punched rails and 

C rail mounted horizontally for 

cable clamping, top cable gland 

plate solid, bottom cable gland 

plate with brush strips, 

earthing rail with star earthing, 

wall mounting bracket 10 mm. 

Hinged part: 

with 25 mm pitch pattern of 

holes in the front and rear frame, 

two 482.6 mm (19″) mounting 

angles mounted on C rails, 

infinitely depth-variable, 

one outlet filter each on the left 

and right side. 

Designer glazed door: 

with 3 mm toughened safety 

glass pane, 

9 + 15 U with mini comfort 

handle for lock inserts, 

21 U with comfort handle and 

2-point locking, 

including lock 3524 E. 



distributors. 

● Glazed door with aluminium 

frame 

● Sheet steel door, solid 

● Perforated door 

Approvals, 

see page 403. 




Width (B1) mm 600 600 600 

Height (H1) mm 478 746 1012 

Depth (T1) mm 573 573 573 



Depth of wall section (T2) mm 135 135 135 

Depth of hinged part (T3) mm 416 416 416 

Maximum installation depth (T4) mm 520 520 520 

Model No. DK 1 7709.735 7715.735 7721.735 

Load capacity, hinged part (kg) 45 75 75 

Accessories 

Solid gland plate 1 2235.135 2235.135 2235.135 346 

Gland plate with brush insert 1 7705.035 7705.035 7705.035 346 

Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 346 

Fan expansion kit, 230 V 1 7980.100 7980.100 7980.100 127 

Spare filter mats 5 3322.700 3322.700 3322.700 149 


Lock inserts see page 285 

Component shelf 2 U, static installation or 

fully extendible, 300 mm deep 

1 7148.035 7148.035 7148.035 321 

Component shelf 2 U, static installation, 

250 mm deep 

1 7119.250 7119.250 7119.250 323 

Fans 

230 V AC or 48 V DC, 

see page 135. 

Socket strips 

for mounting in the wall section 

or on the 482.6 mm (19″) profile, 

see page 328. 

Accessories Page 252 Cable shunting ring Page 355 Slide rails Page 384 



Wall-mounted enclosures, based on Rittal EL, 3-part, with punched rails, depth 473 

T1 

T3 T2 

B1 

H2 

H1 


T4 

B2 

Material: 





Colour: 




(slate grey) 


IP 55 to EN 60 529/10.91 


Wall section: 

with vertical punched rails and C 

rail mounted horizontally for 

cable clamping, solid cable 

gland plate top and bottom, 

wall mounting bracket 10 mm. 

Hinged part: 

with 25 mm pitch pattern of 

holes in the front and rear frame, 

Two 482.6 mm (19″) mounting 

angles mounted on C rails, 

infinitely depth-variable. 


6 – 15 U with mini comfort 


18 – 21 U with comfort handle 

and 2-point locking, 




distributors 

● Special sizes 

(D = 373 mm, 573 mm) 


frame 


Approvals, 

see page 403. 



U Packs of 6 9 12 15 18 21 Page 

Width (B1) mm 600 600 600 600 600 600 

Height (H1) mm 345 478 612 746 878 1012 

Depth (T1) mm 473 473 473 473 473 473 

Clearance width (B2) mm 502 502 502 502 502 502 

Clearance height (H2) mm 284 417 551 684 817 951 

Depth of wall section (T2) mm 135 135 135 135 135 135 

Depth of hinged part (T3) mm 316 316 316 316 316 316 

Maximum installation depth (T4) mm 420 420 420 420 420 420 

Model No. DK 1 7706.135 7709.135 7712.135 7715.135 7718.135 1) 7721.135 

Load capacity, hinged part (kg) 30 45 60 75 75 75 

Accessories 

Gland plate with brush insert 1 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 346 

Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 346 

Base/plinth 1 7505.300 7505.300 7505.300 7505.300 7505.300 7505.300 259 

Wall mounting bracket, 40 mm 4 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 294 


Earth rail, horizontal 1 7113.000 7113.000 7113.000 7113.000 7113.000 7113.000 338 

Component shelf 2 U, static installation and fully 

extendible 

1 7148.035 7148.035 7148.035 7148.035 7148.035 7148.035 321 

Component shelf 2 U, static installation, 250 mm deep 1 7119.250 7119.250 7119.250 7119.250 7119.250 7119.250 323 

Component shelf 1 U, static installation, 140 mm deep 1 7119.140 7119.140 7119.140 7119.140 7119.140 7119.140 322 

1) 


Slide rails 

to support heavy components 

on the 482.6 mm (19″) profile, 

see page 384. 

Semi-cylinder 

for individual locks in the comfort 

or mini comfort handle, 

see page 287. 

Accessories Page 252 Socket strips Page 328 LSA connection system Page 397 Wall mounting Page 294 


63


Wall-mounted enclosures, based on Rittal EL, 3-part, with punched rail, depth 373 

H2 

H1 


T1 

T3 T2 

B1 

B3 

T4 

H3 

B2 

Material: 



Mounting plate: 

2.5 mm sheet steel, zinc-plated, 

passivated 



Colour: 




(slate grey) 


IP 55 to EN 60 529/10.91 


Wall section: 

with 2 cable gland plates, 

1 mounting plate supplied loose, 

assembly parts. 

Hinged part: 

with 2 mounting angles, 

482.6 mm (19″), fitted at the 

front, assembly parts. 








● Special sizes and colours 


frame 


Approvals, 

see page 403. 



U Packs of 3 6 9 12 15 18 21 Page 

Width (B1) mm 600 600 600 600 600 600 600 

Height (H1) mm 212 345 478 612 746 878 1012 

Depth (T1) mm 373 373 373 373 373 373 373 

Clearance width (B2) mm 502 502 502 502 502 502 502 

Clearance height (H2) mm 151 284 417 551 684 817 951 

Depth of wall section (T2) mm 135 135 135 135 135 135 135 

Depth of hinged part (T3) mm 216 216 216 216 216 216 216 

Maximum installation depth (T4) mm 320 320 320 320 320 320 320 

Width of mounting plate (B3) mm 485 485 485 485 485 485 485 

Height of mounting plate (H3) mm 165 299 432 565 699 832 965 

Model No. EL 1 2243.605 2246.605 2249.605 2252.605 2255.605 2258.605 1) 2261.605 

Load capacity, hinged part (kg) 15 30 45 60 75 75 75 

Accessories 

Wall mounting bracket 10 mm 4 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 294 


Gland plate with brush insert 1 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 346 

Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 346 

Cable glands see page 348 


Slide rails 10 2240.000 2240.000 2240.000 2240.000 2240.000 2240.000 2240.000 384 

C rails 4 2238.000 2238.000 2238.000 2238.000 2238.000 2238.000 2238.000 307 

Blanking plates 3 see page 393 

1) 


Blanking panels 

for filling in empty “U” space, 

see page 392. 

Gland plates 

for PG segments for cable 

routing with a high protection 

category, 

see page 347. 

Accessories Page 252 Earthing Page 337 Cable management panel Page 362 Component shelf Page 318 



Wall-mounted enclosures, based on Rittal EL, 3-part, with mounting plate, depth 473 

T1 

T3 T2 

B1 

B3 

H2 

H1 


T4 

H3 

B2 

Material: 




2.5 mm sheet steel, zinc-plated, 

passivated 



Colour: 




(slate grey) 


IP 55 to EN 60 529/10.91 


Wall section: 

with 2 cable gland plates, 

1 mounting plate supplied loose, 


Hinged part: 

with 2 mounting angles, 

482.6 mm (19″), fitted, 











frame 


Approvals, 

see page 403. 



U Packs of 3 6 9 12 15 18 21 Page 

Width (B1) mm 600 600 600 600 600 600 600 

Height (H1) mm 212 345 478 612 746 878 1012 

Depth (T1) mm 473 473 473 473 473 473 473 

Clearance width (B2) mm 502 502 502 502 502 502 502 

Clearance height (H2) mm 151 284 417 551 684 817 951 

Depth of wall section (T2) mm 135 135 135 135 135 135 135 

Depth of hinged part (T3) mm 316 316 316 316 316 316 316 

Maximum installation depth (T4) mm 420 420 420 420 420 420 420 

Width of mounting plate (B3) mm 485 485 485 485 485 485 485 

Height of mounting plate (H3) mm 165 299 432 565 699 832 965 

Model No. EL 1 2253.605 2256.605 2259.605 2262.605 2265.605 2268.605 1) 2271.605 

Load capacity, hinged part (kg) 15 30 45 60 75 75 75 

Accessories 




Gland plate with brush insert 1 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 346 

Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 346 

Base/plinth 1 7505.300 7505.300 7505.300 7505.300 7505.300 7505.300 7505.300 

Cable glands see page 348 

Slide rails 10 2250.000 2250.000 2250.000 2250.000 2250.000 2250.000 2250.000 384 

C rails 4 2239.000 2239.000 2239.000 2239.000 2239.000 2239.000 2239.000 307 


1) 


Base/plinth 

can be fitted with castors, 

see page 259. 

The 1 U component shelf can 

be secured in the centre section 

to support non 19″ mountable 

components, 

see page 322. 

Accessories Page 252 Socket strip Page 328 Wall mounting Page 294 Cable clamps Page 352 


65


Wall-mounted enclosures, based on Rittal EL, 2-part, with swing frame, depth 369 

T1 

B1 


T2 T3 

B2 

H2 

H1 

Material: 

Enclosure: 1.5 mm sheet steel 

Swing frame: Sheet steel 

Front door: Extruded aluminium 

section, 3 mm acrylic glazing 


Enclosure, front door, 

fitted swing frame, 

including assembly parts. 



Approvals, 

see page 404. 




Enclosure and swing frame: 

Primed and powder-coated, 

RAL 7035 

Front door: 

Dark brown anodised 


IP 55 to EN 60 529/10.91 


Width (B1) mm 600 600 600 

Height (H1) mm 380 600 760 

Depth (T1) mm 369 369 369 



Distance from glazed door to swing frame (T2) mm 67 – 97 67 – 97 67 – 97 

Maximum installation depth (T3) mm 270 270 270 

Model No. EL 1 1919.500 1920.500 1926.500 

Accessories 



Gland plates with hole 5 2563.000 2563.000 2563.000 342 


Standard swing frame with double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 285. 

Wall mounting bracket 

for mounting the enclosure 

either 10 mm or 40 mm away 

from the wall, 

see page 294. 


for securing cables to the 

T-heads or the C section, 

see page 352. 

Accessories Page 252 Cage nuts Page 314 Patch panel for copper transmission cables Page 389 Socket strips Page 328 



EMC wall-mounted enclosure, based on Rittal EL, 3-part 

120 

100 

80 

dB 

60 

40 

20 

1 

2 

3 

4 

0 

0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 5000 

MHz 

MHz = Frequency 

dB = RF attenuation 

1 E field = Electrical field 

[V/m] EMC enclosures 

2 E field standard 

enclosures 

3 H field = Magnetic field 

[A/m] EMC enclosures 

4 H field standard 

enclosures 


The Rittal EMC concept 

Rittal offers excellent standard 

sheet steel enclosures, EMCshielded 

enclosures and a practical 

range of EMC accessories. 

Even the standard enclosures 

offer good shielding against 

electrical fields which is generally 

sufficient for many applications. 

Depending on the individual 

application, anything is possible, 

be it closely intermeshed 

potential equalisation in a standard 

enclosure to prevent conducted 

interference, or extra 

shielding to protect against 

high-frequency electromagnetic 

fields. 

Rittal EMC enclosures have a 

high level of shielding, excellent 

attenuation levels and are valuefor-money 

products. This is 

achieved by zinc-plated metal 

surfaces in conjunction with lowresistance 

EMC shields. 

According to EMC legislation, 

CE labelling is only compulsory 

for (active) equipment and systems. 

Empty enclosures are not subject 

to the EMC Directive 

because these are passive components 

which cannot be furnished 

with a declaration of conformity 

with regard to EMC 

standards. 

Material: 

Wall unit and centre part: 




Front door: 

Extruded aluminium section, 

die-cast aluminium corner 

connectors, 4 mm polycarbonate 

window, 

with EMC mesh. 


Powder-coated, 

enclosure RAL 7035, 

door frame RAL 7033. 


IP 55 to EN 60 529/10.91 


1 wall unit, solid, 

2 gland plates, solid, 

1 centre part, vertically hinged, 

2 mounting angles, 482.6 mm 

(19″), fitted, 

1 mounting plate, zinc-plated, 

1 front door with EMC polycarbonate 

window. 

Approvals: 

● TÜV 

● Norske Veritas 

● Russian Maritime 

Register of Shipping 

● Lloyds Register of Shipping 

● VDE 

● UL – Underwriters Laboratories 

Inc. 

for USA and Canada 

U 6 

Width mm 600 

Height mm 345 

Depth mm 515 

Model No. EL 2256.705 


Further information, 



67


Small fibre-optic distributors 

T2 

H 


B2 

B1 

T1 

Material: 




RAL 7035 


1 enclosure, two-part, to accommodate 

a maximum of 48 or 96 

optical fibres, 

1 wall section: 

with mounting holes for wall 

mounting, 

11 or 16 shunting rings: 

for patching cables/fibre stock, 

1 or 2 splicing cassette holders: 

To accommodate a maximum of 

8 or 16 splicing cassettes, 

2 comb strips: 

for cable clamping, and brush 

inserts to provide protection 

against dust, 

1 cover: 

with suspension device and two 

cam locks. 

Note: 

When the small fibre-optic distributor 

is used without a patch 

panel, 1 or 2 splicing cassette 

holders may be retrofitted (maximum 

splicing cassette accommodation 

16 or 32). 







Width (B1) mm Packs of 500 500 Page 

Height (H) mm 500 900 

Depth (T1) mm 120 120 

Width of cable entry (B2) mm 395 395 

Depth of cable entry (T2) mm 29 29 

Model No. DK 1 7452.035 7453.035 

Number of fibres (when using patch panels) 1 – 48 1 – 96 

Accessories 

Patch panels with 12/24 locations for fibre-optic couplings 

Maximum population 

2 patch panels 

Maximum population 

4 patch panels 

F-SMA 6.5 mm, 24 locations 2 7456.035 1) 7456.035 1) – 

F-SMA 7.5 mm, 24 locations 2 7457.035 1) 7457.035 1) – 

ST, 24 locations 2 7458.035 7458.035 – 

DIN 47 256, 24 locations 2 7459.035 1) 7459.035 1) – 

SC, E-2000, E-2000 duplex, 24/12 locations 2 7460.035 1) 7460.035 1) – 

SC duplex, 12 locations 2 7460.135 1) 7460.135 1) – 

Splicing cassette holder for retrofitting 1 7450.035 7450.035 394 

Lock systems 

T handle without lock insert 1 2572.000 2572.000 285 

T handle with lock insert no. 3524 E 1 2575.000 2575.000 285 

Plastic handle with lock no. Nr. 3524 E 1 2576.000 2576.000 286 

Plastic handle 1 2533.000 2533.000 286 


1) 


Splicing cassette holder 

incl. cassette cover, 

see page 394. 

Blanking cover 

for unused cut-outs in patch 

panels, 

see page 395. 

Accessories Page 252 Lock systems Page 281 Nylon loop Page 353 



Small fibre-optic distributors, based on Rittal AE 

B2 

T1 

B1 

H1 

H2 


Layout of the small fibre-optic 

distributor: 

Basic enclosure: 

With cable shunting rings to 

accommodate the fibre stock 

and a strain relief system for 

incoming and outgoing cables. 


With accommodation for 

4 splicing cassettes and 

4 patch panels. 

Patch panels: 

There are 4 patch panels available 

with varying cut-outs. 

Other special versions available 

on request. 

Material: 

Sheet steel 



RAL 7035 


IP 55 (to EN 60 529/10.91) 

when using suitable cable gland 

plates. 


1 enclosure of sheet steel with 

2 gland plates of sheet steel, 

sides, 

1 gland plate, bottom 


70 x 44 mm, 

2 strain relief clips, 

1 cable clamp rail, double, 

1 door of sheet steel, 

with double-bit locks, with 

2 hinges on the right, 

1 mounting plate of sheet steel 

with 6 cable shunting rings 

70 x 44 mm, 

4 recesses for patch panels, 

1 splicing cassette holder. 



Width (B1) mm Packs of 400 Page 

Height (H1) mm 500 

Depth (T1) mm 155 

Mounting plate width (B2) mm 355 

Mounting plate height (H2) mm 455 

Model No. DK 1 7454.000 

Number of fibres (when using patch panels) 1 – 48 

Accessories 

Patch panel, maximum population with 4 patch panels 

Locations 

Patch panel for ST couplings 12 2 7462.000 

Patch panel for SC, E-2000, E-2000 duplex couplings 12/6 2 7463.100 

Patch panel for SC duplex couplings 6 2 7463.200 

Cable gland with 2 half-shells, cable diameter from 8 – 36 mm, for mounting at the bottom, 

reduced protection category 

1 2400.000 349 

Plastic cable gland plates, PG size 13.5, for side mounting 5 1581.000 342 

Plastic cable gland plates, PG size 13.5 /16/21, for side mounting 5 1582.000 342 



Lock systems 

Plastic handle 1 2533.000 286 

Plastic handle with lock cylinder insert 1 2576.000 286 

Lock cylinder insert no. 3524 E 1 2571.000 286 


Connector gland 

for pre-assembled cables, 

see page 349. 

Plastic handle 

with a lock cylinder, 

see page 286. 

Accessories Page 252 Plastic cable gland plates Page 342 Wall mounting Page 294 


69


Fibre-optic marshalling enclosure 

T 

H 


800 

B 

60 

Patch panels are easily fastened 

within the apeture. A door 

is provided to cover and lock the 

splicing cassette accommodation. 

A second door covers and 

locks the secondary chamber/ 

splicing cassette accommodation. 

Both doors are provided 

with different locks. 

Material: 


Colour: 

RAL 7035 



RAL 7035 


1 enclosure to accommodate a 

maximum of 24 optical fibres, 

wall section with mounting holes 

for wall mounting, 

2 doors with different locks, 

for separate access, 

4 shunting rings, 70 x 44 mm, 

2 splicing cassette holders 

each for 2 splicing cassettes, 

4 rubber seals for cable entry, 

4 comb strips for cable clamping. 

Note: 

If the marshalling enclosure is 

used without patch panels, 

4 splicing cassettes, 

2 per side, may be integrated. 


German patent 

No. 195 47 135 


with validity for NL 


with validity for DE, FR, GB, IT 


● Other variants 



Width (B) mm Packs of 400 Page 


Depth (T) mm 120 

Model No. DK 1 7247.000 


Accessories 

Patch panel for 24 ST couplings 1 7247.010 

Patch panel for 24 SC, E-2000 couplings 1) 1 7247.020 

Patch panel for 12 SC duplex couplings 1 7247.030 

1) 12 E-2000 duplex couplings may be accommodated. 




Small fibre-optic distributor, polycarbonate 

170 

H 

T 

145 

169.5 

244 


B 

Configuration 

Small fibre-optic distributor: 


With accommodation for one or 

two splicing cassettes, the width 

of the cassettes may vary from 

92 to 120 mm. 

Dividing plate: 

Covers the splicing cassettes 

and separates them from the 

patch cables. Aperture for patch 

panels and a cable clamp are 

also integrated. 

Patch panels: 

Patch panels for 

F-SMA, E-2000-ST couplings, 

E-2000 duplex and SC and 

SC duplex couplings are 

available. 

Other special variants available 

on request. 

Cable entry: 

For cable entry, there are prepunchings 

for PG cable glands 

integrated into the small fibreoptic 

distributor. 

The cable glands (12 x PG 7 

and 1 x PG 16) are included with 

the supply. Pre-assembled connectors 

will also fit through the 

knockout apertures (for diameters, 

see below). Depending on 

diameter, the cable can either 

be held in the knockouts by a 

2-part cable entry gland or cable 

entry sleeves. The two-part 

cable entry and the grommets 

are not included with the supply, 

due to the different cable 

diameters. 

Diameter of the pre-punched 

knockouts: 

12 x 12.5 mm 

2 x 22.5 mm 

Material: 

Enclosure and cover: 

Fibreglass-reinforced polycarbonate 

Cover screws: Polyamide 

Colour: 

RAL 7035 


IP 66 to EN 60 529/10.91. 


1 enclosure and lid of fibreglassreinforced 

polycarbonate to 

accommodate splicing cassettes 

and patch panels, 

1 enclosure lid with 2 hinges, 

knockouts for PG glands are 

integrated into the enclosure, 

12 x cable gland PG 7, 

1 x cable gland PG 16, 

1 mounting plate with variable 

accommodation of 2 splicing 

cassettes and integral anti-twist 

guard, 

1 dividing plate to cover the 

splicing cassette, accommodation 

for 2 patch panels and 

comb strip for cable clamping, 

2 lid screws of polyamide with 

option of preparing for a lead 

seal, polyamide insulating bungs 

for wall mounting screws. 

All-round foamed-in PU seal. 



Width (B) mm Packs of 180 Page 


Depth (T) mm 90 

Model No. DK 1 7451.000 


Accessories 

Locations 

per patch panel 

Locations 

per enclosure 

Patch panel for 7.5 mm F-SMA couplings 12 24 2 7461.000 

Patch panel for ST couplings 12 24 2 7462.000 

Patch panel for SC, E-2000, 

E-2000 duplex couplings 

12/6 24/12 2 7463.100 

Patch panel for SC duplex couplings 6 12 2 7463.200 

Wall mounting brackets 40 9583.000 

Wall mounting brackets 

Attach securely to the enclosure 

simply by clipping in. 



71

As different 

as our customers 

Rittal offers a range of server racks which are sure to 

impress, thanks to their versatility, innovative technology and 

stylish performance. 

We have the perfect rack for your application – i.e. data 

centres, server rooms or as stand-alone solutions. 

Functionality and assembly-friendliness are basic requirements. 

Depending on the various conditions and objectives 

Server racks 74 

System comparison of racks ............................................................74 

Installation example of the TE 7000 server rack...............................76 

Installation example of the TS 8 server rack.....................................78 

Parts list for the configuration example TE 7000 ..............................80 

Parts list for the configuration example TS 8 ....................................81 

Based on Rittal TE 7000/TS 8 in RAL 9005.......................................82 

Based on Rittal TE 7000, 1000 mm deep .........................................84 

Based on Rittal TS 8, pre-configured ...............................................85 

Based on Rittal flexRack(i), 1000 and 1200 mm deep, 

pre-configured ..................................................................................87 

Based on Rittal TS 8, High Performance Cooling systems HPC ......88 

Smart Package, based on Rittal TS 8, pre-configured .....................89 

Server racks 

of our clients modern server racks must also meet exacting 

standards in terms of power supply, climate control and 

access protection for the system, depending on the various 

conditions and objectives of our clients. 

Every application is different. Rittal is designed for this. 

TE 7000 server racks 

The functional and economic server 

rack – for applications where only 

482.6 mm (19″) equipment is 

installed, and optimum accessibility 

is important. 

TS 8 server racks 

Whether 482.6 mm (19″), metric or 

across the entire width, as a server 

rack the TS 8 offers ingenious installation 

diversity with innovative technology. 

This is complemented by a 

high load capacity of up to 1000 kg, 

an optimum airflow with 78 % free ventilation 

area, plus optimum opportunities 

for combining with liquid cooling 

and other climate control concepts. 

TS 8 – A genuine all-rounder with 

exceptional strengths in demanding 

IT environments. 

Smart Package 

For common practical requirements – 

pre-configured server racks based on 

TS 8. Ready to plug & play. 

Depending on your chosen design, climate 

control components, multi-phase 

power supply including UPS, CMC-TC 

monitoring system and various accessory 

components are already integrated. 

Rittal IT catalogue/Server racks 

73

Server racks 

System comparison of racks 

Rittal TE 7000 

Rittal server rack solutions are as versatile as your requirements! 

Three system platforms with various strengths 

Server racks 

in terms of security, interior installation, climate control 

and design provide the basis for server racks with 

carefully selected configurations to meet your requirements 

precisely. 

Rittal system comparison TE 7000 TS 8 FR(i) 

One platform for all requirements 

in the IT market 

Load capacity 

up to 700 kg 

up to 1000 kg 

Baying 

Side to side 

In all levels 

 

Dismantling 

Climate control 

Fans 

Cooling unit 

 

Air/water heat exchanger 

 

CPU liquid cooling 

Cabling 

Cable space 

Cable management 

Lock system 

2-point 

4-point 

 

Security 

Access control 

Thermal management 


Depth-variable 

Partial installation 

 

2-level principle 

Aesthetics 

Standards 

IEC 60 297-1-2 

Note: 

The more the greater the compatibility. 

TE 7000 – the Top Efficiency server rack 

With two depth-variable 482.6 mm (19″) frames (without 

enclosure frame), the practical rack for the server room. 

● Optimum accessibility. 

● Fully vented front and rear door, 

> 63 % free ventilation area. 

● 2-point locking rod, 

optionally with Ergoform-S handle system. 

Server racks based on Rittal TE 7000, see page 84. 

74 Rittal IT catalogue/Server racks

Server racks 

System comparison of racks 

Rittal TS 8 

Rittal flexRack(i) 

Server racks 

TS 8 – The server rack with no limitations 

Rittal TS 8 server racks offer the ideal conditions to combine 

all the relevant technologies into complete IT infrastructure 

solution. 

Each rack makes an important contribution to the physical 

security of your IT infrastructure and forms the interface to 

pioneering climate control concepts. 

● Ventilation via perforated front and rear ventilated door with 

open area of 78 %. 

● Lock system with comfort handle and 4-point locking. 

● The ingenious symmetry concept of the frame offers baying 

on all sides. 

● Frame section with unlimited mounting diversity. 

● High load capacity up to 1000 kg. 

Server racks based on Rittal TS 8, see page 85. 

flexRack(i) – Smart design, exceptional technology 

The server rack with a highly individual touch. The curved 

designer door unites functionality with aesthetics, while the 

aluminium system channel in the frame sections accommodates 

redundant socket strips, cabling or even rising mains 

from liquid cooling systems with no loss of space. 

● Aluminium vertical sections with multi-functional system 

channel. 

● Screw-fastened enclosure system, may be dismantled. 

● Vented front and rear door 

with open surface area of 64 % in the perforated plate. 

● 2-point locking. 

● Stabilisers for optimum operational safety. 

Server racks based on Rittal flexRack(i), see page 87. 


75

TE 7000 server rack 

Top Efficiency – The TE 7000 as server rack! 

In depths of up to 1000 mm, the TE offers a rational, costeffective 

solution to your server room and data centre requirements 

with a stable, depth-variable 482.6 mm (19″) frame. 

Optimum installation access with the doors and walls 

Server racks 

removed. 

Rittal offers everything needed to configure a plug & play 

rack: Compatible modules for power supply, cooling, 

security, monitoring, and a comprehensive range of system 

accessories. 

Note: 

TE 7000 server racks, see page 84. 


see page 80. 

6 

13 

1 

11 

14 

7 

2 

16 

8 

15 

3 

9 

12 

18 17 

4 

5 

21 

20 

19 

10 

22 

Example: System accessories for perfect configuration of a TE 7000 server rack 


6 Plug-in module, PSM, earthing-pin 

1 

2 

3 

4 

5 

Blanking panel, 482.6 mm (19″), 2 U 



Cable routing bar, 1 U 

Monitor/keyboard unit, 1 U 

7 

8 

9 

10 

11 

12 

Plug-in module, PSM, earthing-pin, red 

PSM busbar, 2000 mm 

Plug-in module, PSM, IEC 320 

Plug-in modules, PSM, IEC 320, red 


KVM switch SSC view 8 

13 Component shelf, heavy-duty 

14 Mounting kit, depth-variable, 

for 482.6 mm (19″) component shelves 

15 Socket strip, 7-way 

16 Distributor clip 

17 UPS, single-phase 

18 Slide rail, depth-variable, 1 U 

19 Base/plinth trim, side 

20 Connection cable, single-phase 

21 Connection cable, three-phase 

22 Base/plinth components, front and rear 


77

TS 8 server rack 

With TS 8 your requirements are precisely met. 

The decisive TS 8 feature is its symmetrical enclosure frame. 

Each vertical section has 4 rows of mounting holes for 

unlimited installation opportunities. The section is also the 

key for baying on all sides. A high level of access protection 

Server racks 

is provided by the comfort handle (with security lock) and 

4-point locking. Outstanding stability (load capacity up to 

1000 kg). The doors have 78 % free ventilation area plus 

innovative Rittal climate control concepts offer operational 

reliability through cooling. 

Note: 

TS 8 server racks, see page 85. 


see page 81. 

6 

13 

14 

1 

7 

12 

15 

2 

8 

3 

9 

16 

21 

4 5 

10 

17 

18 

19 

11 

20 

Example: System accessories for perfect configuration of a TS 8 server rack 

Rittal system accessories are available in 

many different variants, tailored to the 

intended application. 482.6 mm (19″) partial 

configuration and the use of component 

shelves across the entire enclosure 

width are likewise easily achieved. 


3 

4 

5 

6 

7 



Monitor/keyboard unit, 1 U 

Plug-in module, PSM, IEC 320 

Plug-in module, PSM, earthing-pin, red 

1 

2 

Blanking panel, 482.6 mm (19″), 2 U 


8 

9 

10 

11 

12 

PSM busbar, 2000 mm 

Plug-in module, PSM, earthing-pin 

KVM switch SSC view 8 

Plug-in module, IEC 320, red 

Cable bar, 1 U 

13 

14 

15 

16 

17 

18 

19 

20 

21 

Mounting kit, depth-variable, 

for 482.6 mm (19″) component shelves 

Component shelf, heavy duty 

Side panels, plug-type 

Slide rail, depth-variable, 1 U 

Connection cable, three-phase 

Connection cable, single-phase 

Base/plinth trim, side 

Base/plinth components, front and rear, 

vented 

UPS, single-phase 


79

Server racks 

Parts list for the configuration example TE 7000 

Server racks 


TE 7000 Server rack 

W = 800 mm, H = 2000 mm, D = 1000 mm 

1 DK 7000.892 84 

System accessories 

1 Blanking panel, 19″, 2 U 2 DK 7152.035 392 

2 Cable management panel 1 DK 7257.035 361 

3 

4 

5 

6 

7 

8 

9 

10 

11 

12 

13 

14 

15 

16 

17 

18 

19 

20 



Monitor/keyboard unit, 1 U 1 DK 9055.100 190 

Plug-in module, PSM, earthing pin 1 DK 7856.100 100 

Plug-in module, PSM, earthing-pin, red 1 DK 7856.240 100 

PSM busbar, 2000 mm 1 DK 7856.020 99 

Plug-in module, PSM, IEC320 1 DK 7856.080 100 

Plug-in module, PSM, IEC320, red 1 DK 7856.082 100 


KVM switch SSC view 8 1 DK 7552.000 191 

Component shelf, heavy duty 1 DK 7063.897 321 

Mounting kit, depth-variable, for 482.6 mm (19″) component shelves 1 set DK 7063.890 324 

Socket strip, 7-way 1 DK 7240.210 328 

Distributor clip 4 DK 7111.252 360 

UPS, single-phase 1 DK 7857.430 433 

Slide rail, depth-variable, 1 U 2 DK 7063.883 384 

Base/plinth trims, side 1 set TS 8601.015 255 

Connection cable, single-phase 1 DK 7856.026 102 

21 Connection cable, 3-phase 1 DK 7856.025 102 

22 Base/plinth components, front and rear 1 set TS 8601.085 255 


A Power: Power System Module PSM Plus 103 

B Security: CMC-TC monitoring system 158 

C Monitoring: KVM switches 191 

D Side panels 265 

E 19″ installation system 364 

F Power strips 328 

A 

Power System Module 

PSM Plus 

B 


C KVM switches, SSC premium 

D 

Side panels 

E 

19″ installation system 

F 

Power strips 


Server racks 

Parts list for the configuration example TS 8 


TS 8 server rack 

W = 600 mm, H = 2000 mm, D = 1000 mm 

1 DK 7831.438 85 

System accessories 

1 Blanking panel, 19″, 2 U 2 DK 7152.035 392 

2 Cable management panel 1 DK 7257.035 361 

3 

4 

5 

6 

7 

8 

9 

10 

11 

12 

13 

14 

15 

16 

17 

18 

19 

20 



Monitor/keyboard unit, 1 U 1 DK 9055.100 190 

Plug-in module, PSM, IEC320 1 DK 7856.080 100 

Plug-in module, PSM, earthing-pin, red 1 DK 7856.240 100 

PSM busbar, 2000 mm 1 DK 7856.020 99 

Plug-in module, PSM, earthing pin 1 DK 7856.100 100 

KVM switch SSC view 8 1 DK 7552.000 191 

Plug-in module, IEC320, red 1 DK 7856.082 100 


Mounting kit, depth-variable, for 482.6 mm (19″) component shelves 1 set DK 7063.890 324 

Component shelf, heavy duty 1 DK 7063.897 321 

Side panels, plug-type 2 DK 7824.200 266 

Slide rail, depth-variable, 1 U 2 DK 7063.883 384 

Connection cable, 3-phase 1 DK 7856.025 102 

Connection cable, single-phase 1 DK 7856.026 102 

Base/plinth trims, side 1 set TS 8601.015 255 

Base/plinth components, front and rear, vented 1 set TS 8601.065 255 



A Power: Power Modular Concept 200 104 

B Power: Power Distribution Rack PDR/Power Distribution Module PDM 97 

C Cooling: Liquid cooling package 129 

D Security: CMC-TC monitoring system 158 

E Monitoring: KVM switches 191 

F Base/plinth 254 

Server racks 

A 

Power Modular Concept 

PMC 200 

B 

Power Distribution Module 

PDM 

C 

Liquid cooling package 

D 


E 

KVM switch, SSC premium 

F 

Stabiliser, pull-out 


81

Server racks 

RAL 9005 

82

Server racks 

RAL 9005 

The colour black conveys aesthetics and style, understatement and 

perfection for server racks in data centres and office environments. 

An extensive range of accessories is available for a consistent, 

integrated design. Numerous server rack variants on the platforms of 

TS 8 and TE 7000 plus a wide range of accessory components are 

available off-the-shelf immediately. 

Server racks 

TS 8 server rack, 

see page 85. 

TE 7000 server rack, 

see page 84. 

Everything under control in a 

single U. With the Rittal monitor/ 

keyboard unit in an attractive, 

ergonomic design. Available 

in various country versions. 

Modular base/plinth diversity – 

in a variety of sizes and designs. 

Plug & play side panel. 

With two options: Lockable, 

with optional additional internal 

latching. 

Component shelf for attaching 

to the 482.6 mm (19″) frame or 

to L-shaped mounting angles – 

with an area load of 50 kg and 

100 kg. 

For TS 8 enclosure series with 

comfort handle, an opening 

angle of 180° may be achieved 

with a sheet steel door. 

The comfort handle. The fold-up 

system eliminates the need for a 

swivel range. 

Customised enclosure population 

or extension cover. 

Slimline, compact long-stroke 

keyboard with a high-quality 

trackball. Available in various 

country layouts. 


83

Server racks 

Based on Rittal TE 7000, 1000 mm deep 

T1 

B 

H 

HE 

19˝ 

T2 

Server racks 

HE = U 

Benefits: 

● No frame structure, 

optimum accessibility 

Material: 

Sheet steel 





Powder-coated, RAL 7035/9005 




vented sheet steel door front 

and rear, two-point locking rod, 

recessed handle (front) and 

security lock 3524 E, roof plate 

with brush strip for cable entry 

and concealed cut-out for fan 

integration, levelling feet. 



U 42 42 42 42 

Width (B) mm 1) 600 600 800 800 

Height (H) mm 1) 2000 2000 2000 2000 

Depth (T1) mm 1) 1000 1000 1000 1000 

Distance between 482.6 mm (19″) levels in its delivered state (T2) mm 745 745 745 745 

Model No. TE 

RAL 7035 7000.882 – 7000.892 – 

as bayed enclosure without side panels, including baying kit RAL 9005 – 7000.885 – 7000.895 

Doors 

Sheet steel door front and rear, fully vented, 

open surface area 67 % perforated 

 

Roof 

Roof plate including brush strip for cable entry and 

with an optional fan 

 

Floor 

Base frame with maximum cut-out for cable entry or passive ventilation, 

can be fitted with optional blanking panels 

 



Accessories 

Side panels, pluggable, including security lock 3524 E 7000.653 7000.663 7000.653 7000.663 

Ergoform-S handle for semi-cylinder, in exchange for the existing lock 2435.000 2452.000 2) 2435.000 2452.000 2) 

Fan unit, with 2 fans and thermostat, prewired ready for connection 7000.670 7000.671 3) 7000.670 7000.671 3) 

Transport castors, 4 castors including assembly parts 7000.672 7000.672 7000.672 7000.672 

C rail, for cable clamping in the enclosure width 

via cable clamps, on the 482.6 mm (19″) mounting frame at the rear 

7828.060 7828.060 7828.060 7828.060 



7858.162 7858.162 7858.162 7858.162 

Cable clamp rail for cable attachment in the enclosure width 

via cable ties, on the 482.6 mm (19″) mounting frame at the rear 

7828.062 7828.062 7828.062 7828.062 

Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 

TE socket strip, 8-way for earthing-pin plugs 7000.630 7000.630 7000.630 7000.630 

Included with the supply. 1) All sizes are nominal dimensions. For absolute dimensions, refer to detailed drawings on the Internet. 

2) Matt nickel-plated 3) Delivery times on request. 

Cable routing Page 341 Power management Page 328 CMC-TC system monitoring Page 158 


Server racks 

Based on Rittal TS 8, pre-configured 

T1 

1 

B1 

H1 

Design features 

● Robust frame structure 

● Front and rear door fully 

vented; vented surface area 

78 % perforated 

● 4-point locking, 

2-point locking with multiple 

door versions and 

H = 1200 mm 

● Door hinge may be swapped 

to opposite side 

● Cable entry via the roof and 

base 

● Bayable at all levels 


Server racks 

Material: 

Sheet steel 





Dipcoat-primed, powder-coated 

in RAL 7035 or RAL 9005 

Mounting angles and punched 




Enclosure frame TS 8 with 

sheet steel doors front and rear, 

vented, with 130° hinges, 

L-shaped, depth-variable fitted 

mounting angles and/or 

482.6 mm (19″) mounting frame, 

levelling feet, comfort handle 

with security lock and 4-point 

lock. 



1 Optimised air flow 

Number of front and rear doors 1 1 1 1 1 1 1 1 

U 24 24 42 42 42 47 47 47 

Width (B1) mm 2) 600 600 600 600 600 600 600 600 

Height (H1) mm 2) 1200 1200 2000 2000 2000 2200 2200 2200 

Depth (T1) mm 2) 900 1000 900 1000 1200 900 1000 1200 

Model No. DK as bayed enclosure 

RAL 7035 7831.431 7831.433 3) 7831.436 7831.438 7831.481 7831.440 7831.442 7831.483 

without side panels, without baying kit RAL 9005 7831.432 3) 7831.434 3) 7831.437 7831.439 7831.482 7831.441 7831.443 7831.484 3) 

Model No. DK with side panels, 

RAL 7035 – – – – 7831.491 – – 7831.493 

plug-type 

RAL 9005 – – – – 7831.492 – – 7831.494 3) 

Doors 

Sheet steel doors, vented, front and rear 1) 

Roof 

Roof plate for cable entry, two-piece 

Floor 

Levelling feet 

Open base, without base frame 


482.6 mm (19″) levels, front and rear 

L-shaped mounting angles 

Mounting angles attached to depth stays 

482.6 mm (19″) mounting frames, front and rear – – – – – – – – 

Panel earthing, fitted 

Individual compartments, shielded/separate cable rout. p. comp. –/– –/– –/– –/– –/– –/– –/– –/– 

Accessories 

Plug-in side panels 

with T lock, IP 20 

RAL 7035 7824.129 7824.120 7824.209 7824.200 (7831.491 

only) 

RAL 9005 7816.129 7816.120 7816.209 7816.200 (7831.492 

only) 

7824.229 7824.220 (7831.493 

only) 

7816.229 7816.220 (7831.494 

only) 

Security lock for side panels 7824.500 7824.500 7824.500 7824.500 7824.500 7824.500 7824.500 7824.500 

Base mounting bracket 8800.210 8800.210 8800.210 8800.210 8800.210 8800.210 8800.210 8800.210 

Depth-variable slide rail, 1 U 7063.883 7063.883 7063.883 7063.883 7063.883 7063.883 7063.883 7063.883 

Stabiliser, pull-out 7825.200 7825.250 7825.200 7825.250 7825.260 7825.200 7825.250 7825.260 

Included with the supply. 1) Vented surface area 78 % perforated. 2) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed 

drawing on the Internet. 

3) 

Delivery times on request. 

Accessories Page 252 Liquid cooling Page 129 Baying system Page 270 


85

Server racks 


Server racks 

T1 

1 

B1 

H1 


● Robust frame structure 

● Front and rear door fully 

vented; vented surface area 

78 % perforated 

● 4-point locking, 

2-point locking with multiple 

door versions 

● Door hinge may be swapped 

to opposite side 


base 

● Bayable at all levels 


Material: 

Sheet steel 





Dipcoat-primed, powder-coated 

in RAL 7035 or RAL 9005 

Mounting angles and punched 




Enclosure frame TS 8 with sheet 

steel doors front and rear, 

vented, with 130° hinges, 

L-shaped, depth-variable fitted 

mounting angles or 482.6 mm 

(19″) mounting frame, levelling 

feet, comfort handle with security 

lock and 4-point lock. 



1 Optimised air flow 

Number of front and rear doors 1 1 1 2 4 

U 42 42 47 2 x 21 4 x 10 

Width (B1) mm 2) 800 800 800 600 600 

Height (H1) mm 2) 2000 2000 2200 2200 2200 

Depth (T1) mm 2) 1000 1200 1200 900 900 

Model No. DK as bayed enclosure 

RAL 7035 7831.446 7831.485 7831.487 3) 7831.450 7831.460 

without side panels, without baying kit 

RAL 9005 – 7831.486 3) 7831.488 3) 7831.451 3) 7831.461 3) 

Model No. DK with side panels, 

RAL 7035 – 7831.495 3) 7831.497 3) – – 

plug-type 

RAL 9005 – 7831.496 3) 7831.498 3) – – 

Doors 

Sheet steel doors, vented, front and rear 1) 

Roof 

Roof plate for cable entry, two-piece – – 

Roof plate with cable entry openings in the corners – – – 

Floor 

Levelling feet – – 



482.6 mm (19″) levels, front and rear – – 

L-shaped mounting angles – – – – – 

Mounting angles attached to depth stays – – – 

482.6 mm (19″) mounting frames, front and rear – – 


Individual compartments, shielded/separate cable routing per comp. –/– –/– –/– / / 

Accessories 

Plug-in side panels 

RAL 7035 7824.200 (7831.495 only) (7831.497 only) 7824.229 7824.229 

with T lock, IP 20 

RAL 9005 – (7831.496 only) (7831.498 only) 7816.229 7816.229 

Security lock for side panels 7824.500 7824.500 7824.500 7824.500 7824.500 

Base mounting bracket 8800.210 8100.235 8100.235 8800.210 8800.210 

Depth-variable slide rail, 1 U 7063.883 7063.883 7063.883 7063.883 7063.883 

Stabiliser, pull-out 7825.250 7825.260 7825.260 7825.200 7825.200 

Included with the supply. 1) Vented surface area 78 % perforated. 2) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed 

drawing on the Internet. 3) Delivery times available on request. 

Accessories Page 252 Liquid Cooling Page 129 


Server racks 

Based on Rittal flexRack(i), 1000 and 1200 mm deep, pre-configured 

T1 

B1 

T2 

Server racks 

H1 

T3 


● Enclosure system may be dismantled 

because the vertical 

sections are screw-fastened 

to the roof and base frame 

● Aluminium vertical section 

with multi-functional system 

channel 

● Vented front and rear door 

with vented surface area 67 % 

perforated 

● 2-point locking 


base 

● Pull-out stabiliser 

● Bayable 


Material: 


Extruded aluminium section, 

roof frame 

Panels: Sheet steel 


Enclosure panels/door trim 

panel: 


Frame sections, perforated plate 

of front/rear door: RAL 9006 


angles, mounting frame: 



System frame section FR(i) 1) with 

designer door, vented, TS sheet 

steel door at rear, vented, levelling 

feet, stabiliser, earthing of 

all enclosure panels, 

comfort handles for semi-cylinder 

and/or knob handle with 





no. 403 04 312 

British registered design 

no. 301 54 31 



U 24 42 24 42 

Width (B1) mm 3) 600 600 600 600 

Height (H1) mm 3) 1200 2000 1200 2000 

Depth (T1) mm 3) 1005 1005 1205 1205 

Depth absolute, including handles and curvature (T1) mm + 75 mm 3) 1080 1080 1280 1280 

Maximum distance between levels (T2) mm 3) 829 829 1029 1029 

Distance between the 482.6 mm (19″) levels (T3) mm 3) 750 750 850 850 

Model No. FR(i) as bayed enclosure without side panels, without baying kit 7855.310 7855.330 7855.312 7855.332 

Doors 

Designer door, front, vented 2) 

TS sheet steel door, rear, vented 2) 

Roof 

Roof plate, solid – – 

Roof plate with cable entry openings in the corners – – 

Floor 


Stabiliser, pull-out 



482.6 mm (19″) mounting angles, front 

482.6 mm (19″) mounting frame, rear 

Earthing of all enclosure panels on the enclosure frame 

Central earthing point fitted at the rear of the base frame 

Accessories 

2 designer side panels IP 20, including security lock 3524 E 7856.672 7856.687 7856.673 7856.688 

Transport kit, 4 castors including assembly parts 7825.900 7825.900 7825.900 7825.900 

Included with the supply. 1) The system frame FR(i) is generally suitable for the installation of TS 8 accessories. 

2) Vented surface area 67 % perforated. 3) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 

Accessories Page 252 Liquid cooling Page 129 Baying system Page 270 


87

Server racks 

Based on Rittal TS 8, High Performance Cooling systems HPC 

T1 

B1 

B2 

Server racks 

H2 

H1 

T2 

High Performance Cooling 

Systems HPC: 

Glazed door at the front, (180°), 

with 3 mm single-pane safety 

glass, sheet steel door at the 

rear, (130°), comfort handle for 

semi-cylinder and security lock 

3524 E on both sides. 


front and rear, distance between 

levels pre-configured 740 mm, 

free space to front door approx. 

100 mm, max. load capacity of 

the interior installation 1000 kg 

per rack. 

Roof plate, two-piece, 

for cable entry via sliding plate. 

Multi-divided base/gland plate. 

Maximum attainable protection 

category IP 55, in conjunction 

with solid roof (bayed solution) 

and additional screw-fastened 

side panels with stand-alone 

siting. 

Material: 

Sheet steel 


Dipcoat-primed, panels additionally 

powder-coated, 

RAL 7035. 

Gland plates and 482.6 mm 

(19″) mounting frame zincplated, 

passivated. 


Enclosure frame with doors and 

rear panel, roof plate, gland 

plate, 482.6 mm (19″) interior 

installation, earthing of all panels, 

levelling feet, fitted. 

U 42 42 42 42 

Width (B1) mm 1) 600 800 600 800 

Height (H1) mm 1) 2000 2000 2000 2000 

Depth (T1) mm 1) 1000 1000 1200 1200 

Clearance width (B2) mm 512 712 512 712 

Clearance height (H2) mm 1912 1912 1912 1912 

Clearance depth (T2) mm 512 712 512 712 

Model No. DK as bayed enclosure without side panels, without baying kit 7931.810 7931.800 7931.812 7931.802 

Model No. DK with side panels, screw-fastened – – 7931.813 7931.803 

Doors 

Designer glazed front door, sheet steel rear door 

Roof 

Roof plate for cable entry, two-piece 

Floor 


Base frame with multi-piece gland plate 


482.6 mm (19″) levels, front and rear 

L-shaped mounting angles – – – – 

Mounting angles attached to depth stays – – – – 

482.6 mm (19″) mounting frames, front and rear 


Accessories 

Side panel, screw-fastened, IP 55 8100.235 8100.235 

 

 

(7931.813 only) (7931.803 only) 

Depth-variable slide rail, 1 U 7063.883 7063.883 7063.883 7063.883 

482.6 mm (19″) heavy duty base, 700 mm deep, 100 kg load capacity 1) 7063.897 7063.897 7063.897 7063.897 

Installation kit for heavy-duty component shelf, depth-variable 7063.890 7063.890 7063.890 7063.890 

Included with the supply. 1) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 

Accessories Page 252 Baying system Page 270 


Smart Package 


Smart Package A1 

The solution for climate-controlled rooms 

The perforated sheet steel doors at the front and 

rear provide for reliable ventilation of the racks, 

with 78 % of the door surface area available for air 

throughput. 

A brush strip in the plinth and the sliding panel in 

the base frame permits simple cable entry even 

with pre-assembled plug connectors. 

Power supply 

The integrated PSM busbar with 6 x IEC 320 PSM 

modules is a VDE-approved power distribution 

system. 

As IEC 60 320 modules are used, it is not possible 

to transpose the phase and neutral conductors. 

The two infeeds to the PSM busbar permit both 

the mains voltage and a UPS voltage to be made 

available in the rack. The colour-coding of the C13 

modules serves for differentiation (UPS = red). 

Technical specifications: 

● Cooling output for a 10 K temperature difference: 

1.5 kW 

● Nominal UPS output: 2 kVA 

● UPS input voltage: 160 – 276 V AC 

● Autonomy time at 100 % load: 7 min. 

● Infeed: 400 V AC, 3 x 16 A, CEEkon 

● Protocols: HTTP, SNMP, Telnet, SMTP 

Benefits at a glance: 

● Built-in 2 kVA UPS VFI-SS-111 

● VDE-approved power distribution 

● Mains and UPS voltage available on the PSM 

busbar 

T 

Width (B) 800 mm 

Height (H1) 2000 mm 

Overall height (H2) 2100 mm 

Depth (T) 1000 mm 

B 

H1 

H2 

Smart Package 

A glazed front door and a sheet steel rear door, 

together with a vented plinth, ensure that the prescribed 

air routing is maintained. A brush strip in 

the plinth and the sliding panel in the base frame 

permits simple cable entry even with pre-assembled 

plug connectors. 

B 


The solution for the office sector 

Quiet-running roof-mounted fans with speed control 

functionality achieve active rack cooling at 

exceptionally low noise levels. Heat losses of up 

to 2.0 kW can be dissipated. 

Technical specifications 

● Cooling output for a 10 K temperature difference: 

2.0 kW 





● Monitoring: Temperature, smoke, access 

● Protocols: HTTP, SNMP, SSH, Telnet, PPP, SMTP 


● Optimised air routing for servers and PCs 

● Quiet roof-mounted fan, supplied ready-wired: 

Noise level 40 dB (A) 

● 3 kVA UPS VFI-SS-111 

● Mains and UPS voltage available on the PSM busbar 

● Temperature monitoring, smoke alarm and 

access control 

H2 

H1 





T 

permits IT infrastructures to be installed at locations 

subject to high levels of contamination or high 

ambient temperatures. This Smart Package server 

rack is able to dissipate heat losses of up to 3 kW 

at an ambient temperature of 35°C. 

T2 

T 

B 


The server rack to IP 54 

With the cooling unit at the rear, a glazed front 

door, a sheet steel rear door and screw-fastened 

side panels, this rack represents a closed system 

and 


● Cooling output at 35°C ambient temperature: 

3kW 





● Monitoring: Temperature, smoke, access 

● Protocols: HTTP, SNMP, SSH, Telnet, PPP, SMTP 


● Optimised air routing for servers and PCs 

● IP 54 

● 3 kVA UPS VFI-SS-111 

● Mains and UPS voltage available on the PSM 

busbar 

● Temperature monitoring, smoke alarm and 

access control 

H2 

H1 





Overall depth (T2) 1350 mm 


89

Smart Package 


A1 A2 A3 

Smart Package 

1 

2 

3 

4 

Model No. DK 7337.100 7337.200 7337.300 

Description Cooling by convection Cooling using a roof-mounted fan Cooling using a cooling unit 

Available U 36 35 33 

Width (B) mm 1) 800 800 800 

Height (H) mm 1) 2100 2340 2100 

1 

Depth (T1) mm 1) 1000 1000 1350 


Cooling output 

for a temperature difference of for a temperature difference of at 35°C ambient temperature: 

10 K: 1.5 kW 

10 K: 2.0 kW 

3 kW 

Nominal UPS output 2 kVA 3 kVA 3 kVA 

UPS input voltage 160 – 276 V AC 160 – 276 V AC 160 – 276 V AC 

Autonomy at 100 % load approx. 7 min 5 min 5 min 

Three-phase infeed 400 V AC, 16 A, CEE 400 V AC, 16 A, CEE 400 V AC, 32 A, CEE 

Monitoring – Temperature, smoke, access Temperature, smoke, access 

Protocols HTTP, SNMP, Telnet, SMTP HTTP, SNMP, Telnet, SSH, PPP, SMTP HTTP, SNMP, Telnet, SSH, PPP, SMTP 

Assembled supply 

2 

7 

4 

1 

5 

6 

3 

2 

3 

5 

9 

8 

6 

7 

4 

1 

1 

2 

3 

4 

Sheet steel door, vented 

2 U drawer 

PSM busbar 

UPS, 2 kVA, with battery 

1 

2 

3 

4 

5 

6 

7 

Roof-mounted fan 

(not pre-installed) 

Glazed door 

Sheet steel door 

2 U drawer 

PSM busbar 

UPS, 3 kVA, with battery 

CMC-TC PU II 

CMC-TC I/O Unit 

1 Cooling unit 

2 Comfort handle 

3 Glazed door 

4 Sheet steel door 

5 2 U drawer 

6 PSM busbar 

7 UPS, 3 kVA, with battery 

8 CMC-TC PU II 

CMC-TC I/O Unit 

9 

Air routing tunnel, 2 U 

Optional accessories, not pre-installed Packs of Model No. DK Page 

Monitor/keyboard unit, 1 U, 17″ TFT display, German 1 9055.300 190 

SSC view 8 (KVM switch in conjunction with monitor/keyboard unit) 1 7552.000 191 

CPU cable 2 m (server connection cable for Rittal SSC KVM switch) 1 7552.120 196 

CPU cable 4 m (server connection cable for Rittal SSC KVM switch) 1 7552.140 196 

Depth-variable slide rails, 1 U, length 590 – 930 mm 2 7063.884 384 

Component shelf 1 / 2 U, depth-variable 1 7063.720 322 

Component shelf, heavy duty, depth 500 mm 1 7063.895 321 

Installation kit, depth-variable, for component shelf, heavy duty 1 7063.890 324 

Telescopic slides for component shelf, heavy duty 1 7065.000 326 

Component shelf, static installation for 19″ level (depth 250 mm) 1 7119.250 323 

Component shelf, static installation for 19″ level (depth 400 mm) 1 7119.400 323 

Shunting rings 300 x 90 mm 4 7220.600 355 

Light 1 U (for 482.6 mm (19″) installation) 1 7109.200 335 

PSM plug-in module IEC 60 320 4 x C19 (max.16 A) 1 7856.230 100 

Light module PSM 1 7856.210 100 

Active Power System Module 8-way, individually switchable 1 7856.201 101 

Additional RCCMD licence (for server shutdown) 1 7857.421 434 



Smart Package 


A1 A2 A3 Page 

Model No. DK 7337.100 7337.200 7337.300 

Available U 38 37 34 

Width (B) mm 1) 800 800 800 

Height (H2) mm 1) 2100 2340 2100 

Depth (T or T2) mm 1) 1000 1000 1350 

Supply includes 

Doors 

Sheet steel door, vented, with comfort handle, front – – 279 

Glazed door with comfort handle, front – 278 

Sheet steel door, vented, with swivel handle, rear – – 279 

Sheet steel door with swivel handle, rear – 277 

Side panels 

Side panel, plug-in, IP 20 – 266 

Lock for side panel, plug-in (3524 E) – 266 

Side panel, screw-fastened, IP 54 – – 265 

Roof 

Roof plate, solid – 

Roof plate, vented – – 293 

Base 

Base/plinth, solid with brush strip for cable entry at the rear – 255 

Base/plinth, vented with brush strip for cable entry at the rear – – 255 

Gland plate, multi-piece – 263 

Gland plate, one-piece, vented, for TS – – 263 

Filter mat for gland plate, one-piece – – 263 


482.6 mm (19″) level, front and rear 316 

Drawer, 2 U 385 

Power 

PSM busbar, installation height 2000 mm, 

including mounting kit for a maximum of 7 standard modules 

99 

Plug-in module PSM 6 x C13 (IEC 320 appliances, black) 2 2 2 100 

Plug-in module PSM 6 x C13 (IEC 320 appliances, red) 2 2 2 100 

Cooling 

Roof-mounted fan (low-noise, speed-controlled), supplied ready wired – – 126 

Cooling unit with adjusted airflow – – 138 

UPS 

Double conversion UPS, classification: VFI-SS-111 104 

2 kVA including battery and SNMP card – – 434 

3 kVA including battery and SNMP card – 434 

Security/monitoring 

CMC-TC PU II including power pack and mounting kit (1 U) – 158 

Programming cable – 169 

CMC-TC I/O unit – 160 

Temperature sensor, smoke alarm and access sensor – 172 

Digital sensor input module (cooling unit monitoring) – – 174 

Cable kit/mounting kit – 169 

Standard accessories, supplied loose 

Connection cable (3-phase) 16 A 16 A 32 A 167 

IEC 320 appliances extension 0.5 m and 1 m, each 5 5 5 167 

Cable lock C13 20 20 20 100 

Nylon loop cable tie 20 20 20 353 

RCCMD licence (server shutdown software) 1 1 1 434 


1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing. 

Smart Package 


91

Networking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?