GRASEBY Ms 16A Infusion Pump Service Manual - internetMED

More documents

Recommendations

Info

Graseby ® MS16A Syringe Driver 2 Chapter 2 Specification and Standards
Smiths Medical MS16A Syringe Driver Chapter 2 - Specification and Standards Type: Syringe driver with motor driven linear actuator, pulsed motion. Internal 9 V alkaline battery power source. Digital electronic rate control. Automatic switch off when the syringe is empty. Infusion time: < 30 min. - 60 hours Rate range: Variable delivery rate of 0 - 99 mm/h in steps of 1 mm/h. Motor operating interval: 420 ÷ rate = seconds 2 Drive accuracy: The accuracy of the linear drive mechanism that pushes the syringe plunger forward: ± 5% Drive force: The force the linear drive mechanism that pushes the syringe plunger forward can produce: >3 Kg Actuator movement: 0.12 mm every time motor turns. Actuator stroke: 60 mm available (depends on syringe). Syringe sizes: 2 ml to 35 ml The holster supplied will enclose most types of syringe up to 20 ml capacity. Occlusion pressure: 3 - 5 Kg Maximum actuator force 50 N (5 Kgf) @ 9 V Controls: START/TEST and mm PER rate adjusters (tens and units digit controls). Alarm: Audible frequency: Duration: Volume: 3 kHz ± 0.5 kHz (end of travel: occlusion). 5 - 20 secs. Audible at 1m with normal or corrected hearing Technical Service Manual Issue 6 (February 2005) 2 — 3
Page 1 and 2: Smiths Medical Publications This pu
Page 3 and 4: Smiths Medical MS16A Syringe Driver
Page 13 and 14: Graseby ® MS16A Syringe Driver 1 C
Page 15 and 16: MS16A Syringe Driver Smiths Medical
Page 17: MS16A Syringe Driver Smiths Medical
Page 23 and 24: Graseby ® MS16A Syringe Driver 3 C
Page 29 and 30: Graseby ® MS16A Syringe Driver Cha
Page 31 and 32: 3 3 0 MS16A Syringe Driver Smiths M
Page 55 and 56: Graseby ® MS16A Syringe Driver Cha
Page 61: Smiths Medical MD, Inc. 1265 Grey F

GRASEBY Ms 16A Infusion Pump Service Manual - internetMED

Create successful ePaper yourself

Delete template?

Save as template?