CE310 Rotating and Elevating Autopsy Table - Mopec

CE310 Rotating and Elevating Autopsy Table
1
2
3
4
5
6
7
8
9
10
11
The CE310 autopsy table is a pedestal style table that incorporates
an elevating and rotating mechanism within the
pedestal. A standard feature of the CE310 elevating table is
Mopec’s Downdraft Ventilation System, which helps ventilate
the body during an autopsy.
A hydro-aspirator is conveniently located near the sink basin
for ease in collection and/or disposal of bodily fluids. Electrical
receptacles are provided on both sides of the table. A hot and
cold water faucet is provided with a single lever control and a
vacuum breaker to safeguard the facility water supply. A deck
mounted Hand Spray with a high pressure hose allows complete
rinsing of the body or table with the press of a single
lever. The autopsy table has an integrally constructed large
sink and is creased toward the center for complete drainage. A
stainless steel roller bearing carousel allows the table to lock
at rotations of 0°, 90° and 180°.
The elevating pedestal consists of an Electro-Mechanical
Actuator. The elevating pedestal is capable of lifting and lowering
8" (from 32" - 40"). Maximum capacity is 750 pounds.
CE310 Standard Features
Table Top: The table top is fabricated of 14 gauge stainless steel
with a #4 satin finish with built in large sink on one end.
Electrical: Two GFCI duplex electrical receptacles with water
resistant covers are positioned on each side of the pedestal.
Integral Sink: Integral sink to front panel construction eliminates
sharp edges where harmful bacteria can accumulate. All welded,
seamless construction provides durability.
Hand Spray: Deck mounted hand spray for convenience.
Chrome plated brass with high pressure hose. Concealed shut off
valve located under table top.
Hydro-Aspirator: Hydro-aspirator is located on the end of the
table near the sink. The aspirator has a reversing valve to clear
the aspirator of any foreign matter. The aspirator is designed to
drain into the sink end for collection or disposal and is completely
plumbed with control valve, vacuum breaker and tubing.
Faucet: Swing spout faucet with vacuum breaker protection.
Pedestal Assembly: The pedestal consists of two main
assemblies: 1) Electro-Mechanical Actuator, 2) Exterior Pedestal
Housing. The elevating pedestal is capable of lifting and lowering
8" via an electro mechanical actuator. The electro mechanical
actuator is capable of lifting a maximum capacity of 750 lbs.
Table pedestal is fabricated of 11 gauge stainless steel with a #4
satin finish.
Grid Plates: Grid plates are recessed 1/2" and supported by the
table edge without pins. Four indepen dent grid plates are perforated
and removable.
ISO: Quality Management System in compliance with ISO
9001:2008 and applies: Design, Engineering, Manufacturing and
Installation of Equipment Distribution of Supplies for Morgue,
Pathology, Histology and Necropsy Applications.
APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004
standards in addition to CAN/CSA and NFPA standards. This
listing covers the entire product as an entity and not just
individual components.
CE310 Optional Features
BL800 Waste Disposal: Heavy-duty 1 HP disposal, complete
with on/off switch, water solenoid, and vacuum breaker.
CO009 Autopsy Table Perimeter Rinse Assembly: The
perimeter rinse is designed with a 1/2" diameter perforated tube
encompassing the full inner perimeter of the pedestal style tables.
While in use the perimeter rinse helps eliminate an accumulation
of debris under the grid plates during an autopsy.
CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruler
adheres to edge of the table. Can be pealed off and replaced
when needed.
CO017 Scale Stand Table Mounted: Table edge mounted scale
support socket located on the sink end of the autopsy table. The
stand includes a support tube allowing the scale to swing and
drain into the main sink.
Meets ADA Requirement
262
21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com

CE310 Rotating and Elevating Autopsy Table
STANDARD FEATURES
OPTIONAL FEATURES
A Table Top CO009 Autopsy Table Perimeter Rinse Assembly
B GFCI Electrical Outlet (2) CO012 Inch/Centimeter Scale
C Hydro Aspirator CO017 Scale Stand Table Mount
D Fixture w/Swing Spout BL800 1 HP Disposal
E Sink (20” x 12” x 8”)
F Hand Spray
G Rotating and Elevating Pedestal
I
H Removable Grid Plates (4)
I Down Draft Ventilation System
J Mixing Valve
K Access Panel
L Elevation Switch
F M Main Circuit Breaker Switch
G
H
I Down Draft Ventilation System
A
J
B
K
L
M
M
90°
H
C
D
J
1
2
3
4
135°
45°
K
G
L
F
E
5
180°
K
0°
L
6
ADA Compliant
7
8
UL 61010:2004
CAN/CSA-C22.2
NFPA 79-2002
9
100.00 in
254.0 cm
30.00 in
76.2 cm
10
(32.00 - 40.00) in
(81.3 - 101.6) cm
11
FINISHED FLOOR
FINISHED FLOOR
21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
263