Viking Johnson UltraGrip Brochure

UltraGrip
Overview
The Perfect Partner for Difficult Repairs
UltraGrip products are designed to offer a solution
to joining plain-ended pipes and contain an end load
resistant mechanism, that grips and seals onto a variety
of pipe materials including Cast Iron, Ductile Iron, Steel, PVC
and PE. UltraGrip is now available in sizes up to DN400.
Flexible Fit
It is the variety of pipe materials that the range is suitable
for and the wide tolerance which makes UltraGrip ideal
for repair situations where a section of pipe must be cut out
and replaced.
UltraGrip offers an easy transition from one pipe material
to another, making a simple, permanent and reliable repair,
whilst the wide tolerance means that only a few strategic
sizes need to be kept in stock to cover many repair or
emergency situations.
Ease of Installation
On site, UltraGrip is easy to install. The product is
pre-assembled to allow for quick positioning over top and
bottom tolerance pipe with reversible captive bolts requiring
only a single spanner for tightening. An ideal product to
choose when dealing with tricky site conditions such as
confined spaces.
Pipe Materials
For more information and to review
technical data sheets on the Next
Generation UltraGrip range please see
pages 1 - 10 in the Wide Tolerance
Section of this Directory.
Asbestos Cement & GRP pipe materials should not be used with the gripping
version of UltraGrip.
See pages 11 - 15 for use with PVC & PE
*Note: Due to the flexible nature of the plastic pipes, a close fit
Stainless Steel internal support liner is required when PE Pipe
or thin walled PVC is used to make a repair to prevent excessive
pipe deformation which can occur when a coupling or flange
adaptor is installed.
18www.vikingjohnson.com
Viking Johnson UltraGrip Telephone: Viking Johnson +44 (0)1462 UltraGrip 443322 18