You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
waterproofing / industrial flooring<br />
Emer-Patch (smooth)<br />
• Smooth acrylic patching compound.<br />
Uses<br />
For the repair of surface imperfections and defects in<br />
concrete and masonry surfaces.<br />
Part ID<br />
Description<br />
773003 EMER-PATCH SMOOTH 15L<br />
Emer-Acrylic Low Sheen<br />
• A High quality, water based acrylic, low sheen coating.<br />
Uses<br />
Suitable for application to brickwork, cement render,<br />
concrete, blockwork, fibre cement sheeting, plaster board<br />
and pre-primed metals. As a general purpose, high opacity,<br />
durable protective, decorative coating mainly for exterior<br />
use, but also suited for interior surfaces.<br />
Part ID<br />
Description<br />
561394 EMER-ACRYLIC LOW SHEEN TINTS 15L<br />
Emer-Bond<br />
• Waterborne, anti-corrosive primer.<br />
Uses<br />
For fabrication and maintenance work generally. Suitable as<br />
a shop primer due to its quick drying, outstanding adhesion,<br />
good resistance to corrosion and the absence of health and<br />
fire hazards. For application in special conditions, consult<br />
<strong>Parchem</strong> for detailed information.<br />
Part ID<br />
Description<br />
561615 EMER-BOND PRIMER 1L<br />
561616 EMER-BOND PRIMER 4L<br />
561790 EMER-BOND PRIMER 15L<br />
Emer-Tan<br />
• Tannin phosphate, rust-converter for corroding metal,<br />
pre-painting treatment.<br />
Uses<br />
The versatility of Emer-Tan application makes it suitable for<br />
small or large surfaces, inaccessible areas or wherever rust<br />
is present. As a surface pre-treatment for rusted structural<br />
steel, machinery, gates, railings, marine fittings, motor<br />
vehicle floors and all rusted surfaces where the complete<br />
removal of rust is not feasible or economical.<br />
Part ID<br />
Description<br />
561606 EMER-TAN 4L<br />
561607 EMER-TAN 20L<br />
Emer-Gard Primer Type 2<br />
• Quick drying anti-corrosive primer .<br />
Uses<br />
Emer-Gard Primer Type 2 can be used for all new or<br />
old steel surfaces in industrial, commercial or domestic<br />
situations. Used where high durability is desired when only<br />
a minimum of surface preparation is possible, for practical,<br />
safety or reasons of economy.<br />
Part ID<br />
Description<br />
561176 EMER-GUARD PRIMER TYPE 2 4L<br />
561177 EMER-GUARD PRIMER TYPE 2 20L<br />
Cementitious & Resin Underlays<br />
Durafloor Leveltop<br />
• Floor underlay, self smoothing, levelling mortar for vinyl /<br />
carpet / timber (0 - 50 mm thickness).<br />
Uses<br />
Durafloor Leveltop is designed as an internal high performance,<br />
easily installed underlay which forms a very smooth, hard<br />
surface for a variety of floor finishes including carpet, ceramic<br />
tiles, rubber, sheet vinyl and timber flooring.<br />
Part ID Supply (kg) PAck QTY<br />
430092 15 50<br />
Durafloor Leveltop Rapid<br />
• Floor underlay, trowellable, rapid hardening, levelling mortar for<br />
carpet / tiles / vinyl (0-50 mm thickness).<br />
Uses<br />
Durafloor Leveltop Rapid is designed as a heavy duty floor repair<br />
compound which provides a very smooth surface allowing the<br />
smooth installation of carpet, ceramic tiles, sheet rubber, sheet<br />
vinyl and vinyl tiles.<br />
Part ID Supply (kg) PAck QTY<br />
430105 20 50<br />
Durafloor Levelbase<br />
• Floor underlay, economical sub-base build mortar<br />
(up to 200 mm thickness).<br />
Uses<br />
Durafloor Levelbase is designed as a heavy duty sub-base<br />
underlay which forms a smooth, hard surface to be used under<br />
Durafloor Leveltop where deep sections are required.<br />
Part ID Supply (kg) Pack qty<br />
430095 20 50<br />
38 I <strong>Parchem</strong> Construction Supplies Pty Ltd (ABN 80 069 961 968)