Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3M SUPER 77 SPRAY ADHESIVE 24<br />
OZ.<br />
Industrial Strength 3M<br />
adhesive spray is versatile<br />
enough to securely bond<br />
most lightweight materials<br />
or wiring diagrams. Bonds<br />
gaskets in water pumps,<br />
and attaches insulation to<br />
sheet metal. High coverage<br />
and aggressive tack. Great<br />
to glue diamond discs to<br />
lapidary backing plates. 24<br />
OZ Spray Container<br />
021200-21210 $12.95<br />
Resin Bond Diamond Disc<br />
Grind swiftly while<br />
achieving refined, scratch<br />
free surfaces with the<br />
diamond embedded<br />
multi-layer resin surface of<br />
Amerishine's Resin Bond<br />
Diamond Disc. For<br />
smoothing and<br />
pre-polishing of facets,<br />
inlay, and lapping small flat<br />
surfaces. Condition disc<br />
before use. (When selecting a Resin Bond<br />
Disc, choose one mesh size coarser than an<br />
electro-bonded disc mesh size for optimum<br />
preformance.)<br />
11-021 3000 mesh 6"resin bonddiamond disc-ea$89.00<br />
11-025 1200 mesh 6"resin bonddiamond disc-ea$89.00<br />
11-029 600 mesh 6" resin bonddiamond disc-ea$89.00<br />
11-131 3000 mesh 8" resin bonddiamond dis-ea $99.00<br />
11-135 1200 mesh 8" resin bonddiamond dis-ea $99.00<br />
11-139 600 mesh 8" resin bonddiamond dis-ea $99.00<br />
13-049 6" 100 mesh diamondsanding disc-ea $25.00<br />
13-051 6" 220 mesh diamondsanding disc-ea $25.00<br />
13-053 6" 325 mesh diamondsanding discs-ea $25.00<br />
13-055<br />
13-057<br />
6" 600 mesh diamondsanding discs-ea $25.00<br />
6" 1200 mesh diamondsanding discs-ea $25.00<br />
13-059 6" 3000 mesh diamondsanding discs-ea $25.00<br />
13-061 6" 8000 mesh diamondsanding discs-ea $25.00<br />
13-113 8" 100 mesh diamondsanding discs-ea $35.00<br />
13-115 8" 220 mesh diamondsanding discs-ea $35.00<br />
13-117 8" 325 mesh diamondsanding discs-ea $35.00<br />
13-119 8" 600 mesh diamondsanding discs-ea $35.00<br />
13-121 8" 1200 mesh diamondsanding discs-ea $35.00<br />
13-123 8" 3000 mesh diamondsanding discs-ea $35.00<br />
13-125 8" 8000 mesh diamondsanding discs-ea $35.00<br />
Aluminum Oxide Dressing Block<br />
Resharpen dull blades with<br />
the Aluminum Oxide Blade<br />
Dressing Block. Restoration<br />
after approximately 10<br />
square inches of<br />
sharpening. Block<br />
measures 2" x 2" x 6"<br />
32-017 aluminum oxide dressing<br />
block-ea<br />
$16.95<br />
Diamond Sanding Disc Set w/Plate<br />
Pro Diamond Sanding<br />
Disc Set with Backing<br />
Plates. These combinations<br />
of best selling Sanding<br />
Discs entreat with that<br />
refined luster so sought<br />
after. Each set includes:<br />
One 325 mesh Diamond<br />
Sanding Disc, a 600 mesh<br />
Diamond Sanding Disc, a<br />
1200 mesh Diamond<br />
sanding Disc, White Polish Pad, a tube of<br />
Cerium Oxide Compound, and additionally,<br />
four precision Backing Plates.<br />
13-225 6" diamond sanding disc set w/plate-ea $177.00<br />
13-227 8" diamond sanding disc set w/plat-ea $231.00<br />
13-251 6" pro diamond sanding disc set-ea $97.00<br />
13-255 8" pro diamond sanding disc set-ea $131.00<br />
French Cerium Oxide 2 Oz. Jar<br />
Apply Cerium Oxide to a<br />
felt, leather or White Polish<br />
Pad, and obtain high quality<br />
results for your final glass<br />
polishing. Packaged in<br />
individual 2 oz. plastic<br />
containers. Must be used<br />
wet.<br />
15021 french cerium oxide 2 oz. jar-ea $7.00<br />
Diamond Saw Blade<br />
Available in three different<br />
diameters and a variety<br />
of thicknesses, you are sure<br />
to find the right size. A heavy<br />
diamond concentration<br />
provides smooth and<br />
speedy cuts. The<br />
continuous rim diamond<br />
blades deliver durability and<br />
longevity in a product<br />
designed to afford the<br />
professional glass worker with an easygoing<br />
production.<br />
22-153630 6" x 0.032 diamond saw blade-ea $56.00<br />
22-153691 6" x 0.020 diamond saw blade-ea $52.00<br />
22-153692 6" x 0.020 diamond saw blade-ea $52.00<br />
22-153739 5" x 0.020 diamond saw blade-ea $47.00<br />
22-153740 5" x 0.020 diamond saw blade-ea $47.00<br />
22-153742 4" x 0.014 diamond saw blade-ea $44.00<br />
22-153743 4" x 0.014 diamond saw blade-ea $44.00<br />
22-153744 6"x 0.014 diamond saw blade-ea $51.00<br />
22-153745 6" x 0.014 diamond saw blade-ea $51.00<br />
Spin Disc Rack<br />
This rack will hold your<br />
spin discs in place while<br />
they are not in use. It is<br />
space efficient. Dimension<br />
are L9.5", W4.5", and H3.75".<br />
31001 spin disc rack-ea $22.95<br />
<strong>Lapidary</strong><br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
169
<strong>Lapidary</strong><br />
170<br />
DIAMOND DISC<br />
Manufactured with SW<br />
Diamond Products Own<br />
Proprietary Diamond<br />
Plating Process. · High<br />
Quality Diamonds ·<br />
Magnetic Backing · High<br />
Quality at Competitively<br />
Low Prices · Your Present<br />
Equipment Can Be<br />
Upgraded to Diamond<br />
Process · Needs Only<br />
Water for Coolant · Grinding Heavy Stock<br />
Removal · Long Lasting<br />
daswnt10012 diamond disc grit100 12"-ea $125.00<br />
daswnt10016 diamond disc grit100 16"-ea $230.00<br />
daswnt10018 diamond disc grit100 18"-ea $285.00<br />
daswnt10020 diamond disc grit100 20"-ea $370.00<br />
daswnt10024 diamond disc grit100 24"-ea $475.00<br />
daswnt10030 diamond disc grit100 30"-ea $700.00<br />
daswnt1006 diamond disc grit100 6"-ea $35.00<br />
daswnt1008 diamond disc grit100 8"-ea $40.00<br />
daswnt18012 diamond disc grit180 12"-ea $100.00<br />
daswnt18016 diamond disc grit180 16"-ea $200.00<br />
daswnt18018 diamond disc grit180 18"-ea $275.00<br />
daswnt18020 diamond disc grit180 20"-ea $350.00<br />
daswnt18024 diamond disc grit180 24"-ea $410.00<br />
daswnt18030 diamond disc grit180 30"-ea $675.00<br />
daswnt1806 diamond disc grit180 6"-ea $30.00<br />
daswnt1808 diamond disc grit180 8"-ea $35.00<br />
daswnt26012 diamond disc grit260 12"-ea $90.00<br />
daswnt26016 diamond disc grit260 16"-ea $185.00<br />
daswnt26018 diamond disc grit260 18"-ea $255.00<br />
daswnt26020 diamond disc grit260 20"-ea $300.00<br />
daswnt26024 diamond disc grit260 24"-ea $385.00<br />
daswnt26030 diamond disc grit260 30"-ea $650.00<br />
daswnt2606 diamond disc grit260 6"-ea $22.50<br />
daswnt2608 diamond disc grit260 8"-ea $30.00<br />
daswnt36012 diamond disc grit360 12"-ea $90.00<br />
daswnt36016 diamond disc grit360 16"-ea $185.00<br />
daswnt36018 diamond disc grit360 18"-ea $255.00<br />
daswnt36020 diamond disc grit360 20"-ea $300.00<br />
daswnt36024 diamond disc grit360 24"-ea $385.00<br />
daswnt36030 diamond disc grit360 30"-ea $650.00<br />
daswnt3606 diamond disc grit360 6"-ea $22.50<br />
daswnt3608 diamond disc grit360 8"-ea $30.00<br />
daswnt4012 diamond disc grit40 12"-ea $200.00<br />
daswnt4016 diamond disc grit40 16"-ea $375.00<br />
daswnt4018 diamond disc grit40 18"-ea $425.00<br />
daswnt4020 diamond disc grit40 20"-ea $610.00<br />
daswnt4024 diamond disc grit40 24"-ea $700.00<br />
daswnt4030 diamond disc grit40 30"-ea $1,000.00<br />
daswnt60012 diamond disc grit600 12"-ea $90.00<br />
daswnt60016 diamond disc grit600 16"-ea $185.00<br />
daswnt60018 diamond disc grit600 18"-ea $255.00<br />
daswnt60020 diamond disc grit600 20"-ea $300.00<br />
daswnt60024 diamond disc grit600 24"-ea $385.00<br />
daswnt60030 diamond disc grit600 30"-ea $650.00<br />
daswnt6006 diamond disc grit600 6"-ea $22.50<br />
daswnt6008 diamond disc grit600 8"-ea $30.00<br />
daswnt6012 diamond disc grit60 12"-ea $165.00<br />
daswnt6016 diamond disc grit60 16"-ea $300.00<br />
daswnt6018 diamond disc grit60 18"-ea $325.00<br />
daswnt6020 diamond disc grit60 20"-ea $425.00<br />
daswnt6024 diamond disc grit60 24"-ea $525.00<br />
daswnt6030 diamond disc grit60 30"-ea $875.00<br />
daswnt606 diamond disc grit60 6"-ea $60.00<br />
daswnt608 diamond disc grit60 8"-ea $70.00<br />
daswnt8012 diamond disc grit80 12"-ea $150.00<br />
daswnt8016 diamond disc grit80 16"-ea $270.00<br />
daswnt8018 diamond disc grit80 18"-ea $300.00<br />
daswnt8020 diamond disc grit80 20"-ea $400.00<br />
daswnt8024 diamond disc grit80 24"-ea $500.00<br />
daswnt8030 diamond disc grit80 30"-ea $875.00<br />
daswnt806 diamond disc grit80 6"-ea $45.00<br />
daswnt808 diamond disc grit80 8"-ea $45.00<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
DIAMOND STRIPS<br />
· Manufactured with SW<br />
Diamond Products Own<br />
Proprietary Dimond Plating<br />
Process. · Flexible Resin<br />
Bonded Process Disc · High<br />
Concentraton of Diamond<br />
Mixed in Resin ·Adhesive<br />
Backing · Fast Grinding ·<br />
Removes Chips and<br />
Scratches · Replaces Cork /<br />
Pumice · Needs Only Water<br />
for Coolant · Long Lasting MESH:2300<br />
daswst12004 diamond strip-green-4"-ea $15.00<br />
daswst12006 diamond strip-green-6"-ea $25.00<br />
daswst12008 diamond strip-green-8"-ea $30.00<br />
daswst1804 diamond<br />
$15.00<br />
daswst1806 diamond strip-blue-6"-ea $25.00<br />
daswst1808 diamond strip-blue-8"-ea strip-blue-4"-ea $30.00<br />
daswst3604 diamond strip-brown-4"-ea $15.00<br />
daswst3606 diamond strip-brown-6"-ea $25.00<br />
daswst3608 diamond strip-brown-8"-ea $30.00<br />
daswst6004 diamond strip-red-4"-ea $15.00<br />
daswst6006 diamond strip-red-6"-ea $25.00<br />
daswst6008 diamond strip-red-8"-ea $30.00<br />
PRE-POLISHING DISCS<br />
· Manufactured With Sw<br />
Diamond Products Own<br />
Proprietary Diamond<br />
Plating Process. · Flexible<br />
Resin Bonded Process Disc<br />
· High Concentraton Of<br />
Diamond Mixed In Resin ·<br />
Magnetic Backing · Fast<br />
Grinding · Replaces Cork /<br />
Pumice · Needs Only Water<br />
For Coolant · Center Hole Or<br />
No Hole · Long Lasting Mesh<br />
daswpp120012 pre-polishing2300/green 12"-ea$68.00<br />
daswpp120016 pre-polishing2300/green 18"-ea$85.00<br />
daswpp120018 pre-polishing2300/green 18"-ea$95.00<br />
daswpp120020 pre-polishing2300/green 20"-ea$156.00<br />
daswpp120024 pre-polishing2300/green 24"-ea$180.00<br />
daswpp120030 pre-polishing2300/green 30"-ea$250.00<br />
daswpp12006 pre-polishing2300/green 6"-ea $12.00<br />
daswpp12008 pre-polishing2300/green 8"-ea $18.00<br />
daswpp18012 pre-polishing500/blue 12"-ea $68.00<br />
daswpp18016 pre-polishing500/blue 16"-ea $85.00<br />
daswpp18018 pre-polishing500/blue 18"-ea $95.00<br />
daswpp18020 pre-polishing500/blue 20"-ea $156.00<br />
daswpp18024 pre-polishing500/blue 24"-ea $180.00<br />
daswpp18030 pre-polishing500/blue 30"-ea $250.00<br />
daswpp1806 pre-polishing500/blue 6"-ea $12.00<br />
daswpp1808 pre-polishing500/blue 8"-ea $18.00<br />
daswpp36012 pre-polishing900/brown 12"-ea $68.00<br />
daswpp36016 pre-polishing900/brown 16"-ea $85.00<br />
daswpp36018 pre-polishing900/brown 18"-ea $95.00<br />
daswpp36020 pre-polishing900/brown 20"-ea $156.00<br />
daswpp36024 pre-polishing900/brown 24"-ea $180.00<br />
daswpp36030 pre-polishing900/brown 30"-ea $250.00<br />
daswpp3606 pre-polishing900/brown 6"-ea $12.00<br />
daswpp3608 pre-polishing900/brown 8"-ea $18.00<br />
daswpp60012 pre-polishing1800/red 12"-ea $68.00<br />
daswpp60016 pre-polishing1800/red 16"-ea $85.00<br />
daswpp60018 pre-polishing1800/red 18"-ea $95.00<br />
daswpp60020 pre-polishing1800/red 20"-ea $156.00<br />
daswpp60024 pre-polishing1800/red 24"-ea $180.00<br />
daswpp60030 pre-polishing1800/red 30"-ea $250.00<br />
daswpp6006 pre-polishing1800/red 6"-ea $12.00<br />
daswpp6008 pre-polishing1800/red 8"-ea $18.00
12” TABLE TOP MODEL<br />
FEATURES - in 12"Steel<br />
Plate - No Center Post -<br />
Water Through Center<br />
Spindle - Heavy Welded<br />
Steel Chassis - Beige<br />
Hammertone Powder<br />
Baked Paint Finish - Heavy<br />
Duty Bearings Relube - 115<br />
Volt or 220 Volt - ½ HP<br />
Dayton Motor - Brush<br />
Guard - Removable Stell<br />
Guard - One Year Warranty on Motor &<br />
Bearings<br />
dasw1200 12” diameter table top model-ea $1,610.00<br />
dasw1200pkg 12” diameter table top-pkg deal-ea$1,780.00<br />
POLISHING SYTHENTIC FELT DISC<br />
FEATURES · Synthetic<br />
Felt · Magnetic Backing ·<br />
Use with Cerium Oxide ·<br />
Center Hold or No Hole ·<br />
Long Lasting<br />
daswflw12 sythentic felt disc 12"-ea $46.00<br />
daswflw16 sythentic felt disc 16"-ea $81.00<br />
daswflw18 sythentic felt disc 18"-ea $85.00<br />
daswflw20 sythentic felt disc 20"-ea $100.00<br />
daswflw24 sythentic felt disc 24"-ea $118.00<br />
daswflw30 sythentic felt disc 30"-ea $150.00<br />
daswflw6 sythentic felt disc 6"-ea $12.00<br />
daswflw8 sythentic felt disc 8"-ea $18.00<br />
<strong>Lapidary</strong><br />
FLOOR MODEL<br />
FEATURES - No Center<br />
Post - Water Through<br />
Center Spindle - Forward<br />
and Reverse Switch -<br />
Heavy Welded Steel<br />
Chassis - Beige<br />
Hammertone Powder<br />
Baked Paint Finish Heavy<br />
Duty Bearings Relube - 115<br />
Volt or 220 Volt - One Year<br />
Warranty on Motor and<br />
Bearings - Precision Ground Steel Plate for<br />
Magnetic Disc - Heavy Duty Steel Shaft with<br />
Welded Flange - Brush Guard - Removable<br />
Steel Guard - 18” Machine – ¾ HP Dayton<br />
Motor<br />
dasw1800<br />
18- inch diameter disc floor $2,680.00<br />
model-each<br />
dasw1800pkg 18-inch diameter disc-pkg $2,903.00<br />
deal-each<br />
dasw2400pkg 24-inchdiameter disc-pkg $4,000.00<br />
<strong>Lapidary</strong> Wheel Protectors<br />
These <strong>Lapidary</strong> containers<br />
will accept 6" or 8" laps.<br />
They are made with a rigid,<br />
high impact Polystyrene in<br />
order to protect faceting<br />
wheels from damage &<br />
contaminants.<br />
50-180lap $6.95<br />
Backing Plate With 1/2" Hole<br />
A uniform composite plate<br />
aligning within TIR.001.<br />
Arbor hole is 1/2". For use<br />
with thin polish discs,<br />
Diamond Toppers, and<br />
Silicon Carbide discs.<br />
bp12-019 6" backing plate w/ 1/2" hole-ea $20.00<br />
bp12-025 8" backing plate w/ 1/2" hole-ea $25.00<br />
TABLE TOP 8 INCH DIAMETER MODEL<br />
FEATURES - No Center<br />
Post - Water Through<br />
Center Spindle - Heavy<br />
Welded Steel Chassis -<br />
Beige Hammertone Powder<br />
Baked Paint Finish - Heavy<br />
Duty Bearings Relube - 115<br />
Volt or 220 Volt - ½ HP<br />
Dayton Motor - Brush<br />
Guard - Removable Stell<br />
Guard - One Year Warranty<br />
on Motor & Bearings<br />
dasw800 $795.00<br />
Diamond Laser3000 Wing<br />
BladeGuide<br />
Wing Blade Guide Fits on<br />
the Diamond Laser 3000<br />
saws.<br />
dl3000wingblad<br />
NICKEL PLATED WHEEL<br />
Manufactured with SW<br />
diamond products own<br />
proprietary diamond plating<br />
process. Long lasting, high<br />
quality diamonds.<br />
dasw-w1004 nickel plated wheel4"grit100-ea $130.00<br />
dasw-w1006 nickel plated wheel6"grit100-ea $193.00<br />
dasw-w1008 nickel plated wheel8"grit100-ea $241.00<br />
dasw-w1804 nickel plated wheel4"grit180-ea $120.00<br />
dasw-w1806 nickel plated wheel6"grit180-ea $150.00<br />
dasw-w1808 nickel plated wheel8"grit180-ea $205.00<br />
dasw-w2604 nickel plated wheel4"grit260-ea $112.00<br />
dasw-w2606 nickel plated wheel 6"grit260-ea $144.00<br />
dasw-w2608 nickel plated wheel 8"grit260-ea $197.00<br />
dasw-w3604 nickel plated wheel 4"grit360-ea $104.00<br />
dasw-w3606 nickel plated wheel 6"grit360-ea $134.00<br />
dasw-w3608 nickel plated wheel 8"grit360-ea $190.00<br />
dasw-w6004 nickel plated wheel 4"grit600-ea $95.00<br />
dasw-w6006 nickel plated wheel 6"grit600-ea $128.00<br />
dasw-w6008 nickel plated wheel 8"grit600-ea $175.00<br />
dasw-w604 nickel plated wheel4" grit60-ea $155.00<br />
dasw-w606 nickel plated wheel6" grit60-ea $240.00<br />
dasw-w608 nickel plated wheel8" grit60-ea $310.00<br />
dasw-w804 nickel plated wheel4" grit80-ea $140.00<br />
dasw-w806 nickel plated wheel6" grit80-ea $205.00<br />
dasw-w808 nickel plated wheel8" grit80-ea $262.00<br />
$10.50<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
171
<strong>Lapidary</strong><br />
Replacement Glass Blade For DL5000<br />
Diamond blade 4.5mm<br />
stainless steel diamond<br />
coated blade will cut glass,<br />
tile, and even marble. Fits<br />
Diamond Laser 4000 and<br />
5000 bandsaw models.<br />
Specifications Blade Length<br />
(continous band) - 61.5"<br />
(1.562 m) Blade Thickness<br />
or Kerf - .01969" (.050 mm)<br />
Blade Depth - 0.1772" (4.5<br />
mm) Blade Life Estimate - Approximately<br />
80-100 Hours. Cutting time will vary based on<br />
material cut and operator experience<br />
diamondblade50 glass blade for dl5000-ea $129.00<br />
diamondblade50 tile blade for dl5000-ea $129.00<br />
diamondblade70 glass blade for dl7000-ea $169.00<br />
diamondblade70 tile blade for dl7000-ea $169.00<br />
Diamond Laser 3000 Band Saw<br />
Eliminate Your Need For<br />
Grinding! With the<br />
DL3000-XL Band Saw you<br />
can achieve intricate,<br />
smooth and flawless cuts<br />
every time. But that’s not<br />
all!!! The DL3000-XL is<br />
equipped with two thin<br />
diamond coated blades,<br />
providing up to 160 hours of<br />
cutting. Its ultra thin blades<br />
make impossible cuts possible. Adjustable<br />
blade guide height allows for stacking and<br />
cutting 3-4 pieces of glass at once, for time<br />
saving cuts. Sturdy blade guides, mounted<br />
above and below the work surface offers<br />
maximum stability and protection to the blade,<br />
other glass saws do not. Minimal replacement<br />
parts for a money saving advantage; blade and<br />
guides replace every 80 hours, drive belt<br />
replace every 3 years. Easy blade installation<br />
with simple-to-use tensioning and blade<br />
tracking makes it low maintenance. The<br />
variable speed 1/7 hp motor is so quiet you<br />
can hardly tell its running. Built-in target light<br />
eliminates annoying shadows for more<br />
accurate cuts. Durable recirculating water<br />
pump with ultra-plus filtration system keeps<br />
your saw running clean. Extra-large, 10" x 12"<br />
table provides added support for large glass<br />
pieces. With a 3 Year warranty the DL3000-XL<br />
is the RIGHT choice! Specifications Max.<br />
Horsepower 1/7 HP Blade Length 36" Throat<br />
Depth 5" Height 22" Width 14" Length 13"<br />
Weight 23 lb. Table Size 10" x 12" Maximum<br />
Height for top blade guide 1.5" Minimum<br />
Cutting Radius 0.25" Cutting Speed 26" per<br />
minute.<br />
diamondlaser30 $430.00<br />
Diamond Laser 5000 Band Saw<br />
The DL5000 is the biggest<br />
and fastest bandsaw<br />
available for glass. This top<br />
of the line bandsaw cuts<br />
intricate shapes in glass up<br />
to 12-1/2" wide and 3" thick.<br />
Cuts 24" circles, "S" curves<br />
in dalle de verre slab glass<br />
and more. Super powerful<br />
1/2 hp variable speed motor<br />
makes easy work of even<br />
the thickest glass. The recirculating water<br />
pump keeps a steady flow of water at the<br />
cutting point, and the oversize 15" x 13" cutting<br />
table provides stability for large sheets of<br />
glass. Diamond coated steel blade enables<br />
radius cuts as tight as 1/2". Portable with<br />
built-in carrying handle. Also Available in 230V.<br />
Specifications: Motor: 1/2 hp variable speed<br />
Cutting Speed: 32" per minute Min. Cutting<br />
Radius: .25" Optimal Cutting Thickness: 3/4"<br />
Max. Blade Guide Clearance: 3" Blade Length:<br />
62" Blade Life: approx. 80 - 100 hours Throat<br />
Depth: 12" Table Size: 15" x 13" Overall Size:<br />
25"H x 28"W x 13"D Weight: 45 lbs. Warranty:<br />
3 years (excludes blades)<br />
diamondlaser50 $1,095.00<br />
Diamond Laser 7000 Band Saw<br />
This wet band saw makes<br />
precision cuts through slab<br />
glass, cast glass, fused<br />
glass, marble, granite and<br />
tile with ease. The DL7000<br />
is an excellent time saver<br />
for artists working in<br />
multi-mediums. The<br />
easy-to-use features gets<br />
you cutting quickly, and the<br />
large two wheel design<br />
creates a 13" throat depth to accommodate<br />
glass slab up to 2' wide and a 3/4HP motor to<br />
ensure no drag. Recirculating Water Pump<br />
keeps saw running clean. There are no other<br />
saws like the Diamond Laser 7000 on the<br />
market today! The DL7000 includes<br />
instructional manual and 1 year warrranty.<br />
Specifications: Maximum Horsepower - 3/4 HP<br />
Motor Shaft RPM - 1400 RPM Legnth (with<br />
table) - 38" Height - 48" Weight - 162 lbs. (73.5<br />
kg) Table Size - 20" x 20" Throat Depth - 13"<br />
Blade Length - 94.25" Blade Thickness - .029"<br />
(.736 mm) Blade Depth - 0.30" (7.5 mm)<br />
Minimum Radius Cut - 1/2" - 3/4" Max. Cutting<br />
Thickness - 1 1/2" slab glass Cutting Speed on<br />
3/4" slab glass - 8" per minute. 120V. (Availible<br />
in 230 V upon request)<br />
diamondlaser70 $1,695.00<br />
172<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147
Diamond Flat Files<br />
· Manufactured with SW<br />
Diamond Products Own<br />
Proprietary Diamond<br />
Plating Process. · High<br />
Quality Diamonds · Can be<br />
used on Glass, Fiberglass,<br />
Carbon, Cermaics, Micarta,<br />
Carbide, Quartz, Marble,<br />
Beryllium Oxide, Polyesters,<br />
Graphite, Porcelain, Stone,<br />
Onyx · Flat File Size: 6<br />
inches long by 3/8 inches wide · Half Round<br />
File Size: 6 inches long by 9/16 inches wide<br />
daswswf1-c<br />
daswswf1-f<br />
daswswf1-m<br />
daswswf1-set<br />
daswswf2-c<br />
daswswf2-f<br />
daswswf2-m<br />
daswswf2-set<br />
diamond flat files- coarse<br />
grit-ea<br />
diamond flat files- fine<br />
grit-ea<br />
diamond flat files- medium<br />
grit-ea<br />
diamond flat files- set of<br />
3-ea<br />
diamond 1/2 round<br />
files-coarse grit-ea<br />
diamond half round<br />
files-fine grit-ea<br />
diamond 1/2 round<br />
files-medium grit-ea<br />
diamond half round<br />
files-set of 3-ea<br />
$7.50<br />
$7.50<br />
$7.50<br />
$17.50<br />
$9.75<br />
$9.75<br />
$9.75<br />
$22.50<br />
VERTICAL MODEL<br />
FEATURES - No Center<br />
Post - Water Through<br />
Center Spindle - Forward<br />
and Reverse Switch -<br />
Heavy Welded Steel<br />
Chassis - Beige<br />
Hammertone Powder<br />
Baked Paint Finish - Heavy<br />
Duty Bearings Relube - 115<br />
Volt or 220 Volt - One Year<br />
Warranty on Motor and<br />
Bearings - Precision Ground Steel Plate for<br />
Magnetic Disc - Heavy Duty Steel Shaft with<br />
Welded Flange - Brush Guard - Adjustable<br />
Steady Rest Can Tilt At Different Angles - 18"<br />
Machine ¾ HP Dayton Motor<br />
daswv18<br />
daswv18pkg<br />
daswv24<br />
daswv24pkg<br />
18 inch diameter vertical<br />
model-each<br />
18 inch diameter verticalpkg<br />
deal-each<br />
24 inch diameter vertical<br />
model-each<br />
24 inch diameter vertical<br />
pkg deal-each<br />
$2,990.00<br />
$3,625.00<br />
$3,565.00<br />
$4,830.00<br />
Glass Blade For DL3000 & Speedster<br />
Diamond Laser 3000 and<br />
Speedster XL replacement<br />
blade. Specifications Blade<br />
Length (continous band) -<br />
36" Blade Thickness or Kerf<br />
- 0.012" Blade Depth - 1/8"<br />
Blade Life Estimate -<br />
Approximately 80-100 hours<br />
depending on thickness of<br />
material being cut and<br />
operator experience.<br />
Mesh Diamond Disc<br />
Grind swiftly while<br />
achieving refined, scratch<br />
free surfaces with the<br />
diamond embedded<br />
multi-layer resin surface of<br />
Amerishine's Resin Bond<br />
Diamond Disc. For<br />
smoothing and<br />
pre-polishing of facets,<br />
inlay, and lapping small flat<br />
surfaces. Condition disc<br />
before use. (When selecting a Resin Bond<br />
Disc, choose one mesh size coarser than an<br />
electro-bonded disc mesh size for optimum<br />
preformance.)<br />
dd10-125 1200 mesh 6" disc-ea $59.00<br />
dd10-127 600 mesh 6" disc-ea $59.00<br />
dd10-129 260 mesh 6" disc-ea $59.00<br />
dd10-131 180 mesh 6" disc-ea $79.00<br />
dd10-143 100 mesh 6" disc-ea $79.00<br />
dd10-145 80 mesh 6" disc-ea $79.00<br />
dd10-225 1200 mesh 8" disc-ea $69.00<br />
dd10-227 600 mesh 8" disc-ea $69.00<br />
dd10-229 260 mesh 8" disc-ea $69.00<br />
dd10-231 180 mesh 8" disc-ea $99.00<br />
dd10-235 100 mesh 8" disc-ea $99.00<br />
dd10-237 80 mesh 8" disc-ea $99.00<br />
Mesh Diamond Toppers<br />
By applying a Diamond<br />
Topper to a master backing<br />
plate, one is provided with<br />
an all around adept and<br />
competent replacement for<br />
tired and worn discs.<br />
Toppers are prepared with<br />
the same high quality as the<br />
Diamond Discs and readied<br />
with a pressure-sensitive<br />
adhesive backing.<br />
dt10-513 1200 mesh 6" topper-ea $39.00<br />
dt10-515 600 mesh 6" topper-ea $39.00<br />
dt10-517 260 mesh 6" topper-ea $39.00<br />
dt10-519 180 mesh 6" topper-ea $49.00<br />
dt10-521 100 mesh 6" topper-ea $49.00<br />
dt10-523 80 mesh 6" topper-ea $49.00<br />
dt10-611 1200 mesh 8" topper-ea $49.00<br />
dt10-615 600 mesh 8" topper-ea $49.00<br />
dt10-619 260 mesh 8" topper-ea $49.00<br />
dt10-621 180 mesh 8" topper-ea $59.00<br />
dt10-625 100 mesh 8" topper-ea $59.00<br />
dt10-627 80 mesh 8" topper-ea $59.00<br />
Wood Blade For DL3000<br />
Turn your glass saw into a<br />
wood saw with the Diamond<br />
Laser wood blade. Fits both<br />
the 3000 and 3000 XL<br />
models.<br />
diamondblade30 $90.00<br />
diamondblade30 $19.95<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
<strong>Lapidary</strong><br />
173
<strong>Lapidary</strong><br />
174<br />
Swaptop Trim Saw Conversion Kit<br />
Transform Your Swaptop<br />
Shaper/Grinder into a<br />
SWAPTOP TRIM SAW with<br />
this fast & easy Conversion<br />
Kit!<br />
REQUIREMENTS: Must<br />
have a Swaptop<br />
Shaper/Grinder to use this<br />
Trim Saw Conversion kit. -<br />
Accurate & Powerful Trim<br />
Saw is designed for the Professional<br />
Glassworker's every lapidary need.<br />
- Use Wet or Dry: Work wet with the<br />
DiamondCut blade (included) to saw glass,<br />
stone & other mineral based materials.<br />
Quick and Easy: No hassle assembly takes<br />
only minutes! Powerful motor unit allows<br />
operation with the shaft vertical or horizontal -<br />
to run two machines at once.<br />
Turn a Single Machine into Several Heavy<br />
Duty working Machines at a fraction of the<br />
cost! Have more tools, & work more efficiently<br />
in the same amount of space - without the cost<br />
of buying an entire new machine! INCLUDES:<br />
10" x 12" Table Housing with metal table<br />
insert, Blade Arbor, Blade Guard, 6 1/2"<br />
DiamondCut Blade, WaterDrip System, allen<br />
wrench, and Instruction Guide.<br />
in10675 $47.95<br />
Swaptop 6" Flat Lap Machine<br />
One of the great<br />
opportunities available to<br />
our customers with the<br />
SwapTop Machines is the<br />
ability to inexpensively own<br />
heavy duty lapidary<br />
machinary at a fraction of<br />
the cost - and work space.<br />
This Industrial strength Flat<br />
Lap Machine comes with<br />
the same Base & Motor as<br />
the other SwapTop Machines, as well as a<br />
Water Drip System, (4) 6" Diamond Disks (1)<br />
170 Grit 6" Flat Lap (1) 325 Grit 6" Flat Lap (1)<br />
600 Grit 6" Flat Lap (1) 1200 Grit 6" Flat Lap<br />
Plus a Polishing Pad & the Flat Lap Top. TWO<br />
YEAR FULL CONFIDENCE WARRANTY<br />
through Manufacturer.<br />
in10680 $289.95<br />
Swaptop Wonder Workshop<br />
The SwapTop 6"<br />
WONDER WORKSHOP is<br />
a complete Professional<br />
Glass <strong>Lapidary</strong> Workshop<br />
that fits in a remarkably<br />
Limited space - & at an<br />
Incredibly Economical<br />
Price. The WONDER<br />
WORKSHOP Set includes<br />
your Base, Motor,<br />
Waterdrip, and ALL THREE<br />
INDUSTRIAL TOPS. This means you could<br />
have 3 different industrial machines in one!<br />
The Shaper/Grinder, the Flat Lap Machine, and<br />
the TrimSaw. Takes under 5 minutes to switch<br />
the Tops & transform your SwapTop machine!<br />
Also Includes a Full Set of Flat Laps &<br />
Diamond Blades. Incredibly Wonderful<br />
<strong>Lapidary</strong> Machines for any serious<br />
GlassWorker<br />
in10690 $399.95<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
200 Grit Diamond Drum 5/16" Id<br />
200 Grit Diamond Drum<br />
5/16" ID will leave a clean,<br />
smooth, and more polished<br />
ground edge. They are ideal<br />
for softer, more delicate<br />
materials and when a finer<br />
finished surface is desired.<br />
Fits .312" (7.92 mm) arbor TIR<br />
in40196 $25.00<br />
100 Grit Superband Diamond DRUM5/16<br />
100 Grit Superband<br />
Diamond Drum 5/16" ID is<br />
suitable for grinding and<br />
shaping all types of stone,<br />
marble, tile, ceramic, glass,<br />
and other similar materials.<br />
Fits .312" (7.92 mm) arbor TIR<br />
in40209 $39.00<br />
80 Grit Diamond Drum 5/16" Id<br />
80 Grit Diamond Drum<br />
5/16" ID is ideal for<br />
removing large amounts of<br />
material and for faster<br />
grinding and shaping of<br />
large areas.<br />
Fits .312" (7.92 mm) arbor TIR<br />
in40299 $25.00<br />
1/4" Drilling Bit (6mm) 120 Grit<br />
1/4" Drilling Bit 120 Grit is<br />
used to drill precision holes<br />
and create fine details while<br />
still using your standard<br />
size diamond drums.<br />
Make 1/4" (10 mm) holes.<br />
Works right on top of larger<br />
diamond drums, no need to<br />
change or remove your 1"<br />
drum before using.<br />
Fits .312" (7.92 mm) arbor TIR<br />
in40314 $12.50<br />
300 Series Adapter<br />
Use the 300 Series<br />
Adapter with the 1/8" (3<br />
mm) (IN40318), 1/4" (6<br />
mm) (IN40314) or 3/8" (10<br />
mm) (IN40338) diamond<br />
drums to drill precise holes.<br />
Works right on top of larger<br />
diamond drums, no need to<br />
change or remove before<br />
using.<br />
Use the diamond drill drums to make holes in<br />
mineral based materials like stone, tile, and<br />
glass. Drill openings for clock works. Make<br />
holes for hanging or create fine details and<br />
precise designs.<br />
Fits .312" (7.92 mm) arbor TIR<br />
in40317 $5.25
Fine 260 Grit Replacement Wheel<br />
Fine 260 Grit Replacement<br />
Wheel Fits Diamond Max<br />
Bevel Grinder / <strong>Lapidary</strong><br />
Machine.<br />
fine 260 $75.95<br />
Grinder Head<br />
Grind Your Own Glass<br />
Joints With This Bit.<br />
Bit Is Impregnanted With<br />
Diamonds.<br />
gh1420 grinder head 14/20-ea $86.96<br />
gh1922 grinder head 19/22-ea $131.00<br />
8" Daimond Flat Lap<br />
Our laps are replacement<br />
disks which you would use<br />
with a "Master lap"<br />
(casting). They have a 1/2"<br />
arbor hole for afixing to the<br />
master lap. They are NOT<br />
pressure sensitive backs.<br />
Just mechanically clamped.<br />
in-438060 8" 60 grit daimond flat lap-ea $74.95<br />
in-438100 8" 100 grit daimond flat lap-ea $74.95<br />
in-438120 8" 1200 grit daimond flat lap-ea $49.95<br />
in-438170 8" 170 grit daimond flat lap-ea $59.95<br />
in-438275 325 grit diamond flat lap 8" -ea $59.95<br />
in-438300 8" 3000 grit daimond flat lap-ea $49.95<br />
in-438325 8" 325 grit daimond flat lap-ea $59.95<br />
in-438600 8" 600 grit daimond flat lap-ea $49.95<br />
Swaptop Shaper & Grinder<br />
The SwapTop SHAPER/<br />
GRINDER is a full-size, Full<br />
Feature Machine designed<br />
to accomadate all of a<br />
Glass Worker's grinding,<br />
shaping, and drilling needs.<br />
Can Professionally Handle<br />
Large Scale Projects as<br />
well as precisely Fine Detail<br />
work. Use the SWAPTOP<br />
SHAPER/GRINDER to<br />
Grind, Shape, Edge Finish, & Drill Glass - or<br />
stone, marble, ceramic, & mirror! Comes<br />
complete with a 1" Grinding Drum- 60 grit.<br />
Sturdy and Accurate 10" x 12" Work Surface.<br />
Works both Wet (with Diamond Drums) & Dry<br />
Simplistic Assembly - Transform Shaper into<br />
Grinder in under Five Minutes. Size: 10.75"<br />
wide x 9" deep x 6.75" high. TWO YEAR<br />
WARRANTY by Inland Craft<br />
With OPTIONAL Conversion Kits, you'll have<br />
the unique ability to transform your<br />
Shaper/Grinder Machine into many other<br />
versitile professional workmanship machines -<br />
quickly & easily -<br />
in10640 $104.95<br />
Swaptop Shape/grind Conversion Kit<br />
Transform Your SwapTop<br />
TRIM SAW into a<br />
Full-Feature GRINDER &<br />
SHAPER! In Just One<br />
Simple Conversion that<br />
takes under five Minutes,<br />
you can swap your Trim<br />
Saw INTO a<br />
Shaper/Grinder for shaping,<br />
edging, and drilling (Works<br />
Wet & Dry) Perfect for<br />
Professional GlassWorkers. REQUIREMENTS:<br />
Customer must have a SwapTop Trim Saw to<br />
use the Conversion Kit. Kit Includes: 10" x 12"<br />
table housing with metal table insert, blade<br />
arbor, blade guard, allen wrench, helpful<br />
instruction guide, & One 6 1/2" General<br />
Purpose Blade for DRY SAWING. Can be<br />
used with the OPTIONAL 6 1/2" Diamond<br />
Coated Blade for WET SAWING Glass or<br />
stone.<br />
in10655 $25.95<br />
Swaptop 6-1/2" Trim Saw<br />
The SwapTop Trim Saw is<br />
an all purpose, Full Feature<br />
Trim Saw for a glass<br />
worker's every lapidary<br />
need. Use Wet or Dry (2<br />
year Warranty). Cut clean &<br />
intricately detailed<br />
pre-formed cabs. Water<br />
cooling system works with<br />
H20, so no oil mess.<br />
Includes Wet-Use 6-1/2" x<br />
.020" Diamond Blade for fast, clean-cutting of<br />
Long Lasting Aluminum Surface won't corrude<br />
when wet - Fence can be used to ensure most<br />
accurate cuts - 10" x 12" Work Surface<br />
Powerful & Quiet DC motor (Motor RPM: 2,800<br />
) allows the 6-1/2" blades to provide a Full<br />
1-1/8" Depth of clean cuts & intense glasswork<br />
details. No hassle product assembly, Easy -<br />
Straight Forward operation - Blade Changes<br />
take under five minutes! (TRIM SAW can be<br />
used with the OPTIONAL 6-1/2" WoodCut or<br />
Standard 6-1/2" Blades for Dry Sawing.)<br />
With the Purchase of the Professional<br />
Glass-Cut SWAPTOP TRIM SAW, our<br />
customers will have the unique ability to<br />
convert into various other heavy duty lapidary<br />
machines.<br />
in10670 $159.95<br />
Swaptop 6" Flat Lap Conversion Kit<br />
With this 6" Flat Lap<br />
Conversion Kit, you can<br />
transform your Trim Saw, or<br />
Grinder/Shaper into a Flat<br />
Lap Machine! Save cash,<br />
conserve room on your<br />
workbench, and own<br />
several Heavy Duty<br />
Industrial machines perfect<br />
for the hard glassworker.<br />
<strong>Lapidary</strong><br />
in10685 $199.95 175<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147
<strong>Lapidary</strong><br />
176<br />
6X1.5" SINTERED GRIND WHEEL<br />
Sintered Diamond Grinding<br />
Wheels are excellent for<br />
having extra long life in<br />
comparison to single layer<br />
wheels. They are made for<br />
grinding harder materials.<br />
Diameter: 6.0" (150mm)<br />
Grit: 60/80 Weight: 5.7 Lbs.<br />
Arbor: 1" OD arbor standard<br />
in416065 60 grit sintered grind whl 6x1.5"-ea $324.95<br />
in416085 80 grit sintered grind whl 6x1.5"-ea $324.95<br />
in416105 100 grit sintered grind whl 6x1.5-ea $324.95<br />
in416145 140 grit sintered grind whl 6x1.5-ea $324.95<br />
in416205 200 grit sintered grind whl 6x1.5-ea $324.95<br />
8X1.5" SINTERED GRIND WHEEL<br />
Sintered Diamond Grinding<br />
Wheels are excellent for<br />
having extra long life in<br />
comparison to single layer<br />
wheels. They are made for<br />
grinding harder materials.<br />
Diameter: 8.0" (200mm)<br />
Arbor: 1" OD arbor standard<br />
in418065 60 grit sintered grind whl 8x1.5"-ea $394.95<br />
in418085 80 grit sintered grind whl 8x1.5"-ea $394.95<br />
in418105 100 grit sintered grind whl 8x1.5-ea $394.95<br />
in418145 140 grit sintered grind whl 8x1.5-ea $394.95<br />
in418205 200 grit sintered grind whl 8x1.5-ea $394.95<br />
4X1.5" ELECTROPLATED WHEEL<br />
Long lasting electroplated<br />
diamond wheels are great<br />
for grinding softer materials.<br />
Comparable to the sintered<br />
diamond grinding wheels,<br />
but with a shorter life.<br />
Diameter: 4.0" (100 mm)<br />
Weight: 1.7 Lbs.<br />
Arbor: 1" OD arbor standard<br />
with reducer rings to 3/4",<br />
5/8", and 1/2" indcluded.<br />
in424060 60 grit electroplated whl 4x1.5"-ea $124.95<br />
in424080 80 grit electroplated whl 4x1.5"-ea $124.95<br />
in424120 120 grit electroplated whl 4x1.5-ea $114.95<br />
in424170 170 grit electroplated whl 4x1.5-ea $114.95<br />
in424220 220 grit electroplated whl 4x1.5-ea $109.95<br />
in424360 360 grit electroplated whl 4x1.5-ea $109.95<br />
in424600 600 grit electroplated whl 4x1.5-ea $109.95<br />
ACRYLIC 6" MASTER LAP<br />
Acrylic 6" Master Lap can<br />
be used with any Flat Lap<br />
Machines having a 1/2"<br />
arbor.<br />
Diameter: 6.0" (152 mm)<br />
Weight: 1.0Lbs. Arbor Hole:<br />
1/2" (12mm) Thickness:<br />
6mm<br />
in436001 $12.95<br />
6X1.5” ELECTROPLATED WHEEL<br />
Long lasting electroplated<br />
diamond wheels are great<br />
for grinding softer materials.<br />
Comparable to the sintered<br />
diamond grinding wheels,<br />
but with a shorter life.<br />
Diameter: 6.0" (100 mm)<br />
Weight: 2.9 Lbs.<br />
Arbor: 1" OD arbor standard<br />
with reducer rings to 3/4",<br />
5/8", and 1/2" indcluded.<br />
in426060 60 grit electroplated whl 6x1.5-ea $149.95<br />
in426080 80 grit electroplated whl 6x1.5-ea $149.95<br />
in426120 120 grit electroplated whl 6x1.5-ea $134.95<br />
in426170 170 grit electroplated whl 6x1.5-ea $134.95<br />
in426220 220 grit electroplated whl 6x1.5-ea $129.95<br />
in426360 360 grit electroplated whl 6x1.5-ea $129.95<br />
in426600 600 grit electroplated whl 6x1.5-ea $129.95<br />
DIAMOND FLAT LAP ( 8" )<br />
Quality Diamond Disks for<br />
Professional Flat Lap<br />
Machines 8" Diameter<br />
Replacement Disks for use<br />
use with a "Master lap". All<br />
flat laps have a 1/2" Arbor<br />
Hole for mechanically<br />
clamping them to the<br />
master lap.<br />
in438060 60 grit diamond flat lap 8" -ea $74.95<br />
in438100 100 grit diamond flat lap 8"-ea $74.95<br />
in438120 1200 grit diamond flat lap 8"-ea $49.95<br />
in438170 170 grit diamond flat lap 8"-ea $59.95<br />
in438275 275 grit diamond flat lap 8"-ea $59.95<br />
in438300 3000 grit diamond flat lap 8"-ea $49.95<br />
in438325 325 grit diamond flat lap 8"-ea $59.95<br />
in438600 600 grit diamond flat lap 8"-ea $49.95<br />
PIANO WIRE DRILLS<br />
Piano Wire Drill is used for<br />
drilling tiny holes in glass<br />
or stone. It can be<br />
used with the FlexShaft.<br />
Hole size depends on drill<br />
diameter.<br />
in450141 .75mm piano wire drill-ea $2.95<br />
in450142 1.0mm piano wire drill-ea $2.95<br />
in450143 1.25mm piano wire drill-ea $2.95<br />
in450144 1.5mm piano wire drill-ea $2.95<br />
in450145 1.75mm piano wire drill-ea $2.95<br />
in450146 2.0mm piano wire drill-ea $2.95<br />
in450147 2.5mm piano wire drill-ea $2.95<br />
DIAMOND COOLANT 8oz<br />
Increase the life of your<br />
Grinder Bits! Simply add a<br />
Small portion of this 8 oz.<br />
bottle of Diamond Coolant<br />
to the water reservoir of<br />
your grinder, table saw or<br />
band saw. Key Features<br />
Include: Make grinding and<br />
sawing faster & easier.<br />
High lubricity, water soluble<br />
solution. Increases bit life by reducing friction.<br />
Can increase grinding speed.<br />
in50011 $5.50<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147
1/8" Drilling Bit (3mm) 120 Grit<br />
1/8" Drilling Bit 120 Grit is<br />
used to drill precision holes<br />
and create fine details while<br />
still using your standard<br />
size diamond<br />
drums! Standard 100 Grit for<br />
multi-task use. It works right<br />
on top of larger diamond<br />
drums, no need to change<br />
or remove your 1" drum<br />
before using. Fits .312"<br />
(7.92 mm) arbor TIR<br />
in40318 $12.50<br />
3/8" Drilling Bit (10mm) 120 Grit<br />
3/8" Drilling Bit 120 Grit is<br />
used to drill precision holes<br />
and create fine details while<br />
still using your standard<br />
size diamond drums.<br />
3/8" (10 mm) holes. Works<br />
right on top of larger<br />
diamond drums, no need to<br />
change or remove your 1"<br />
drum before using.<br />
Fits .312" (7.92 mm) arbor TIR<br />
in40338 $13.50<br />
60 Grit Diamond Drum 5/16" Id<br />
60 Grit Diamond Drum<br />
5/16" ID is ideal for<br />
removing large amounts of<br />
material and for faster<br />
grinding and shaping of<br />
large areas. Fits .312" (7.92<br />
mm) arbor TIR<br />
in40399 $25.00<br />
325 Grit Diamond Drum 5/16" Id<br />
325 Grit Diamond Drum<br />
5/16" ID will leave an<br />
ultra-clean, smooth, and<br />
more polished ground edge.<br />
They are ideal for softer,<br />
more delicate materials and<br />
when a finer finished<br />
surface is desired.<br />
Fits .312" (7.92 mm) arbor TIR<br />
in40496 $25.00<br />
Diamond 6.5" Standrd Trim Saw<br />
BLADE<br />
Standard DiamondTuff 6.5"<br />
blade has a substrate<br />
thickness of .020" and is<br />
developed for cutting hard<br />
glass materials. Blades are<br />
crafted from hardened &<br />
tempered high-carbon<br />
spring steel. Arbor holes<br />
are cut within minus .0000"<br />
and plus .00075" tolerance.<br />
Diamond blades contain<br />
fine quality diamond crystals - bonded to<br />
Stainless Steel with techniques Developed &<br />
Proven - by professional workers for over two<br />
decades. 1/2" Arbor.<br />
in40960 6.5" standrd trim saw blade-ea $27.95<br />
in40961 6.5" thincut trim saw blade-ea $27.95<br />
in40968 6.5" xtra thincut saw blade-ea $27.95<br />
Brazed Diamond Core Drills<br />
Work your Glass with<br />
Professional Grade Hole<br />
Saws, and get the most life<br />
out of each quality bit!<br />
These Diamond-coated<br />
Brazed Core Drills have a<br />
3/8" (10mm) shaft and fit<br />
most standard hand drills &<br />
drill presses. With all the<br />
various sizes available, the<br />
glassworker now has a<br />
hearty range of diameters to work with.<br />
<strong>Lapidary</strong><br />
in410944<br />
in410945<br />
brazed diamond core drill 5mm-ea $25.95<br />
brazed diamond core drill 6mm-ea $26.95<br />
in410946 brazed diamond core drill 10mm-ea $31.95<br />
in410947 brazed diamond core drill 13mm-ea $34.95<br />
in410948 brazed diamond core drill 16mm-ea $38.95<br />
in410949 brazed diamond core drill 19mm-ea $46.95<br />
in410950 brazed diamond core drill 22mm-ea $51.95<br />
in410951 brazed diamond core drill 25mm-ea $57.95<br />
in410952 brazed diamond core drill 32mm-ea $68.95<br />
in410953 brazed diamond core drill 33mm-ea $72.95<br />
in410954 brazed diamond core drill 38mm-ea $79.95<br />
in410955 brazed diamond core drill 51mm-ea $102.95<br />
in410956 brazed diamond core drill 57mm-ea $109.95<br />
in410957 brazed diamond core drill 64mm-ea $118.95<br />
in410958 brazed diamond core drill 70mm-ea $126.95<br />
in410959 brazed diamond core drill 76mm-ea $132.95<br />
in410961 brazed diamond core drill 44mm-ea $88.95<br />
in410962 brazed diamond core drill 47mm-ea $98.95<br />
in410970 brazed diamond core drill 82mm-ea $146.95<br />
in410971 brazed diamond core drill 89mm-ea $156.95<br />
in410972 brazed diamond core drill 94mm-ea $166.95<br />
in410973 brazed diamond core drill 102mm-ea $175.95<br />
in410974 brazed diamond core drill 28mm-ea $63.95<br />
in410976 brazed diamond core drill 8mm-ea $28.95<br />
in410978 brazed diamond core drill 27mm-ea $61.95<br />
in410979 brazed diamond core drill 35mm-ea $74.95<br />
in410980 brazed diamond core drill 53mm-ea $105.95<br />
in410981 brazed diamond core drill 72mm-ea $129.95<br />
in410982 brazed diamond core drill 5 "-ea $247.95<br />
in410983 brazed diamond core drill 30mm-ea $66.95 177<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147
<strong>Lapidary</strong><br />
178<br />
MAGNALIGHT 3 DIOPTER<br />
MagnaLight is an ideal light<br />
and magnifier for shaping,<br />
sawing, drawing or working<br />
with small items or intricate<br />
details. It has two<br />
adjustable mounting clamps<br />
that attach to any horizontal<br />
or vertical surface up to 2"<br />
in thickness. It uses a single<br />
standard light bulb up to 60<br />
watts maximum. It has a<br />
sturdy spring tensioned jointed metal arm.<br />
Revolves a full 360º. The head can be<br />
adjusted to a maximum vertical height of 16"<br />
above the mounting surface and rotates in a<br />
ball joint to an infinite number of positions.<br />
in76020 $43.95<br />
BAND BLADE 37.7"<br />
These Blades are<br />
developed for the DB-100<br />
BandSaw to fit any sawing<br />
need! The Wood-Cut blade<br />
saw is designed for use<br />
with most types of woods<br />
and wood composites. A metal blade<br />
is also available. Blades are cut on precision<br />
equipment. Blade Length:<br />
37.7". Blade tooth shape,<br />
angle, and sharpness are<br />
true to each other within .003". 14 Teeth Per<br />
Inch. 022" wide blade with approximately 0.32"<br />
of kerf. .130" depth. Designed for maximum<br />
sawing smoothness and speed.<br />
in90001 wood-cut band blade 37.7"-ea $19.95<br />
in90003 metal-cut band blade 37.7"-ea $19.95<br />
BLADESERT BAND SAW BLADE GUIDE<br />
BladeSert Band Saw Blade<br />
Guide supports the blade at<br />
the point of sawing for<br />
better control, thus keeping<br />
the blade tracking straight<br />
while sawing. Works<br />
equally well with<br />
DiamondCut, WoodCut, and<br />
MetalCut blades.<br />
in90022 $2.75<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
EASYMARK DIAMOND POINT SET 20PC<br />
The EasyMark Diamond<br />
Point Set contains twenty<br />
tips to carve, engrave on,<br />
and shape stone, plastics<br />
and more. Use with the<br />
FlexShaft and EasyMark<br />
Engraver to create custom<br />
designs and add detail to<br />
your work.<br />
Shaft diameter: 2.32mm OD<br />
in50115 $19.95<br />
50 PC DIAMOND TIP CARVING SET<br />
This set contains 50 tips to<br />
carve, engrave on, and<br />
shape stone, plastics, and<br />
more. Use with the<br />
FlexShaft or any other<br />
adjustable chuck tool to<br />
create custom designs,<br />
shapes, and details.<br />
Shaft diameter: 3.2 mm OD<br />
in50117 $59.95<br />
DB-100 DIAMOND BAND SAW w/BLADE<br />
The DIAMOND BAND<br />
SAW is perfect for Faceting<br />
Glass, Intarsia (decorative<br />
inlaid patterns), free form,<br />
and even cabbing preforms.<br />
Specifically built to cleanly<br />
Saw & Facet glass. Cut<br />
accurate preforms right out<br />
of the middle of a solid<br />
glass piece! Comes<br />
equipped with one Diamond<br />
Blade for sawing glass, opals, stone, and most<br />
other hard materials. Features:<br />
Power: Permanent magnet, speed controlled<br />
motor delievers up to 2800 rpm and a full 48<br />
oz. -in. of torque. Cutting speed is dependent<br />
on material type & thickness, up to 12" / minute<br />
(30.5 cm/minute).<br />
This Band Saw's coolant system provides a<br />
continuous, regulated flow of clean water to the<br />
diamond blade when wet sawing. (Uses water<br />
for coolant to avoid messy oil clean-up.) Drain<br />
channels funnel coolant into the internal drain<br />
system for a clean, clear view while sawing.<br />
The work surface is made of machined<br />
aluminum 9" x 10". The spring-loaded tension<br />
system has been molded into the frame,<br />
ensuring proper wheel alignment, simple blade<br />
setup, and perfect tracking hour after hour,<br />
thus enhancing blade life. The frame, cover, &<br />
water reservoir are molded entirely from<br />
structural grade Industrial thermoplastic. All<br />
frame and interior support walls are extra thick<br />
for maximum strength and durability. Quiet<br />
Operation. Cutting Depth: Maximum material<br />
thickness: 3". Weighs 9 Pounds. Can be used<br />
with Optional Metal-Cut & Wood-Cut Blades.<br />
TWO YEAR FULL CONFIDENCE WARRANTY<br />
by INLAND CRAFT<br />
in91030 $231.95
Diamond Compound 14,000 Grit<br />
This diamond grit is<br />
carefully graded 14,000<br />
mesh synthetic crystals for<br />
an exceptional polish on<br />
most materials including<br />
some of the most stubborn<br />
cabochons.<br />
5 carats of synthetic<br />
diamond packaged in a<br />
convenient "ready to use"<br />
syringe. Diamond crystal is suspended in latex<br />
compound to prevent drying out.<br />
Synthetic Industrial Diamond 14,000 Mesh 5<br />
carats (diamond) 5 grams (total compound<br />
weight)<br />
in450614 $14.95<br />
Station Backsplash<br />
This fully adjustable and<br />
washable vinyl surround will<br />
keep your work area clean<br />
and safe by containing saw<br />
and shaper over spray. Set<br />
up around the back and<br />
sides of your SwapTop Trim<br />
Saw or Shaper / Edger and<br />
keep your work area clean<br />
and safe. Key Features:<br />
-Fully adjustable to fit<br />
around any grinder. -It's made of washable<br />
vinyl. -Keeps your work area clean and safe by<br />
containing over spray. -Printed with lots of<br />
helpful information and tips.<br />
in50014 $13.95<br />
Rinse-off Cutter Oil<br />
This Water Soluble<br />
Professional Cutting Oil by<br />
INLAND is exclusively<br />
formulated for cutting glass<br />
smoothly, habilitating clean<br />
scoring, breaks, and<br />
prolonging wheel life.<br />
Rinses Away with H2O and<br />
won't stain your clothing.<br />
in50057 $3.50<br />
Strip & Circle Maker<br />
The STRIP & CIRCLE<br />
MAKER cuts exact circles &<br />
perfectly straight strips.<br />
Marking pens may be used<br />
in this tool for pattern layout<br />
help. Wide, Solid Brass 11"<br />
bar is engraved with both<br />
Metric & Inch designations.<br />
For accurate cutting, bar<br />
markings can be adjusted<br />
to a precise point through a<br />
viewing window. Brass Cutting Arm is mounted<br />
on tripod via universal joint, allowing scoring,<br />
cutting, or marking of glass.<br />
in50060 $24.95<br />
Face Shield 12" X 9"<br />
This large 12" x 9" face<br />
shield attaches to the rear<br />
of your SwapTop Trim Saw<br />
or Shaper to provide added<br />
protection from sawing and<br />
grinding debris. Simply<br />
rinse under running water to<br />
clean.<br />
in50017 $13.95<br />
Magna Shield 3 Diopter<br />
The convex lens makes it<br />
easier to see your work and<br />
reduces eye fatique,<br />
allowing you to work longer.<br />
The large 9" x 12" size<br />
provides adequate<br />
coverage while being easy<br />
to work under. It easily<br />
attaches to the rear of your<br />
SwapTop Trim Saw or<br />
Shaper Providing added<br />
protection from sawing and grinding debris to<br />
keep you and your work area safe and clean.<br />
Just rinse under running water for cleaning.<br />
in50018 $13.95<br />
Flexshaft Flexible Power Unit<br />
The FlexShaft turns your<br />
SwapTop motor into a hand<br />
held engraving, drilling, and<br />
shaping tool. It fits onto all<br />
motors with a 5/16"<br />
diameter shaft. Simply plug<br />
it on and it's ready to go.<br />
The FlexShaft works with<br />
nearly any 1/32" to 1/8"<br />
shaft tool or bit. Use it to<br />
engrave, polish, sand, drill,<br />
and create intricate detailing in many materials.<br />
Length: 42" (106 cm)<br />
in50019 $34.95<br />
Miniphaser Speed Controller<br />
The MiniPhaser's solid<br />
state circuitry gives you<br />
exceptional speed control to<br />
saw more effectively and<br />
efficiently. For use with<br />
older style SwapTop<br />
motors, or DC motors not<br />
exceeding 400 watts (out)<br />
power.<br />
115 Volt 3.75" wide x 4.5"<br />
deep x 2.0" high<br />
in50020 $24.95<br />
Easymark Electric Engraver<br />
The EasyMarK is a<br />
lightweight power tool for<br />
carving and engraving on<br />
stone, marble, glass,<br />
plastics and more. Use it to<br />
create custom designs, add<br />
detail, sign your work, and<br />
even identify your valuables.<br />
Construction: Lightweight<br />
impact resistant plastic. Size: 6" x 3.5" Weight:<br />
10.6 oz. UL approved 18,000 RPM high speed<br />
12 volt motor.<br />
<strong>Lapidary</strong><br />
in50105 $26.95 179<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147
<strong>Lapidary</strong><br />
180<br />
White Polish Pad<br />
Utilize your diamond<br />
compound or oxide polish<br />
powders with confidence<br />
and ease to achieve a fine,<br />
mirror polish finish on glass<br />
and gemstones with the<br />
White Polish Pad. A great<br />
substitute for leather and<br />
felt discs.<br />
pp14-411 6" white polish pad-ea $12.00<br />
pp14-421 8" white polish pad-ea $16.00<br />
TURBO CARVER<br />
The Turbo Carver is an<br />
excellent tool for easy<br />
engravings and relief<br />
carvings. It can be used on<br />
wood, glass, bone, hard<br />
metals, gems and more.<br />
The textured rubber grip<br />
handle makes it slip proof<br />
giving greater accuracy in<br />
applying fine details. It is<br />
lightweight at 1/2 ounce.<br />
The small size increases the ability to engrave<br />
hard to reach places. It is not affected by water<br />
so oxidation will not happen.<br />
tc1 $385.25<br />
Mark I Faceting Machine Complete<br />
With the mark IV you can<br />
cut glass and gems into<br />
magnificent shapes with<br />
ease. Powerful, Heavy Duty<br />
2 Speed Motor<br />
Aluminum/Magnesium<br />
Construction Accepts Full<br />
Sized 8 inch Laps<br />
Light-Weight and Portable<br />
Large See-thru Acrylic Drip Tank Bright 100 Watt<br />
Flexible Lamp Accurate Readings to 1/10<br />
Degree Available in 110 Domestic or 220 Volt<br />
Export Models Fully wired and Ready to Run<br />
With Standard Dop Set, Transfer Fixture,<br />
Instruction Book, and all necessary tools.<br />
marki $1,435.00<br />
Mark IV Faceting Machine Complete<br />
With the mark IV you can<br />
cut glass and gems into<br />
magnificent shapes with<br />
ease. Continuously Variable<br />
Motor (Adjustable speed 0<br />
to 600 RPM)<br />
Aluminum/Magnesium<br />
Construction Accepts Full<br />
Sized 8 inch Laps<br />
Light-Weight and Portable<br />
Large See-thru Acrylic Drip<br />
Tank Bright 100 Watt Flexible Lamp Accurate<br />
Readings to 1/10 Degree Available in 110 V.<br />
Domestic or 220 Volt Export Models Fully<br />
wired and Ready to Run Standard Dop Set,<br />
Transfer Fixture, Instruction Book, and all<br />
necessary tools.<br />
markiv $1,230.00<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
SWAPTOP 8" ALL IN WONDER<br />
The All-In-Wonder can be<br />
set up as an 8" Flat Lap, a<br />
6 1/2" Trim Saw, and/or a 1"<br />
Drum Grinder / Shaper.<br />
Each of the three machines<br />
can be set up in just<br />
minutes. Water cooled<br />
system means no messy oil<br />
to clean up. Faster RPM<br />
motor allows you to quickly<br />
finish the finest cabs<br />
possible. This machine includes (almost*)<br />
everything you need to start making<br />
cabochons today. Quiet and Powerful: Our<br />
direct drive Permanent Magnet DC motor is<br />
stronger than other machines you will find for<br />
two or three times the price. Comes complete<br />
with built-in speed controller, and water drip kit.<br />
Quick and Easy: No hassle product assembly,<br />
operation is easy and straight forward, and<br />
changeover takes only minutes. As a Flat Lap<br />
Machine: Quickly and easily converts to an 8"<br />
SwapTop Flat Lap Machine with the<br />
conversion kit provided. Includes (4) 8"<br />
diamond disks plus a polishing pad. (1) 170<br />
Grit 8" Flat Lap (1) 325 Grit 8" Flat Lap (1) 600<br />
Grit 8" Flat Lap (1) 1200 Grit 8" Flat Lap As a<br />
Trim Saw: Quickly and easily converts to a<br />
SwapTop Trim Saw with the conversion kit<br />
provided. Includes (1) 6 ½" x .020" diamond<br />
blade. As an Edger/Shaper: Quickly and easily<br />
converts to a SwapTop Edger/Shaper with<br />
the included conversion kit. Includes (1) 1" 100<br />
grit diamond drum. Flat Lap setup will work<br />
with 6" or 8" laps.<br />
inst10890 $479.95<br />
<strong>Lapidary</strong> Trim Saw<br />
The <strong>Lapidary</strong> Trim Saw is<br />
the perfect tool for cutting<br />
valuable faceting material<br />
and pre-forming cabochons.<br />
The saw table is flat so it is<br />
easy to trim oversized slabs<br />
and removable so clean up<br />
is easy. The sturdy table<br />
measures 6" X 10". The<br />
saw housing is made of<br />
unbreakable cross-linked<br />
polyethylene - No Rusting, No messy oil, uses<br />
water only. The 1/4 HP equivalent variable<br />
speed ball bearing direct drive motor allows the<br />
saw to run fast enough to use ultra thin<br />
diamond blades and it is powerful enough for<br />
sintered diamond blades. Comes with 4" blade<br />
5/8" arbor.<br />
ts $329.00
Swaptop 6" Flat Lap Machine<br />
6" Diamond Disks:<br />
Includes (4) diamond disks<br />
plus a polishing pad. (1)<br />
170 Grit 6" Flat Lap (1) 325<br />
Grit 6" Flat Lap (1) 600 Grit<br />
6" Flat Lap (1) 1200 Grit 6"<br />
Flat Lap Quiet and<br />
Powerful: Our direct drive<br />
Permanent Magnet DC<br />
motor is stronger than other<br />
machines you will find for<br />
two or three times the price. Comes complete<br />
with integrated speed controller. Quick and<br />
Easy: No hassle product assembly, operation<br />
is easy and straight forward, and diamond disk<br />
changes take less than a minute. Converts to<br />
Trim Saw: Quickly and easily converts to a<br />
SwapTop Trim Saw with the optional<br />
conversion kit. Converts to Edger/Shaper:<br />
Quickly and easily converts to a SwapTop<br />
Edger/Shaper with the optional conversion kit.<br />
inst10680 $289.95<br />
Swaptop 6" Flat Lap Conversion Kit<br />
The SwapTop 6" Flat Lap<br />
Conversion Kit turns your<br />
SwapTop Trim Saw or<br />
Edger / Shaper into an<br />
accurate and powerful<br />
cabbing machine for all<br />
your lapidary and hobby<br />
projects. Have more tools,<br />
work better in the same<br />
amount of space without<br />
the cost of buying an entire<br />
new machine! Quick and Easy: No hassle<br />
assembly takes only minutes. The cleverly<br />
designed motor unit allows it to operate with<br />
the shaft vertical or horizontal to run two<br />
machines. Multiple Use: Turns a single<br />
machine into several machines at a fraction of<br />
the cost without tying up your work space.<br />
Cabbing Made Easy: Kit includes (4) 6"<br />
diamond discs and a polishing pad to be used<br />
with included 6" Master Lap. Also includes 4<br />
oz. Polishing Powder.<br />
inst10685 $199.95<br />
Swaptop 6" All In Wonder<br />
The All-In-Wonder can be<br />
set up as a 6" Flat Lap, a 6<br />
1/2" Trim Saw, and/or a 1"<br />
Drum Grinder / Shaper.<br />
Each of the three machines<br />
can be set up in just<br />
minutes. Water cooled<br />
system means no messy oil<br />
to clean up. Faster RPM<br />
motor allows you to quickly<br />
finish the finest cabs<br />
possible. This machine includes (almost*)<br />
everything you need to start making<br />
cabochons today.<br />
inst10690 $399.95<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
SWAPTOP 8" FLAT LAP MACHINE<br />
The SwapTop 8" Flat<br />
Lap is the most affordable<br />
8" cabbing set up available<br />
today. With over 75% more<br />
diamond surface than our 6"<br />
machine, you can work<br />
bigger pieces and work<br />
faster than ever before.<br />
Because of its unique low<br />
profile design, the SwapTop<br />
can be taken anywhere, but<br />
it will still pass muster on the workbench at<br />
home. Water cooled system means no messy oil to<br />
clean up. 2800 RPM motor allows you to<br />
quickly finish the finest cabs possible. This<br />
machine includes (almost*) everything you<br />
need to start making cabochons today 8"<br />
Diamond Disks: Includes (4) diamond disks<br />
plus a polishing pad. (1) 170 Grit 8" Flat Lap<br />
(1) 325 Grit 8" Flat Lap (1) 600 Grit 8" Flat Lap<br />
(1) 1200 Grit 8" Flat Lap Quiet and Powerful:<br />
Our direct drive Permanent Magnet DC motor<br />
is stronger than other machines you will find for<br />
two or three times the price. Comes complete<br />
with integrated speed controller. Quick and<br />
Easy: No hassle product assembly, operation<br />
is easy and straight forward, and diamond disk<br />
changes take less than a minute. Converts to<br />
Trim Saw: Quickly and easily converts to a<br />
SwapTop Trim Saw with the optional<br />
conversion kit. Converts to Edger/Shaper:<br />
Quickly and easily converts to a SwapTop<br />
Edger/Shaper with the optional conversion kit.<br />
Can be used with 6" OR 8" laps.<br />
inst10880 $369.95<br />
Swaptop 8" Flat Lap Conversion Kit<br />
The SwapTop 8" Flat<br />
Lap Conversion Kit turns<br />
your SwapTop Trim Saw<br />
or Edger / Shaper into an<br />
accurate and powerful 8"<br />
cabbing machine for all<br />
your lapidary and hobby<br />
projects. Have more tools,<br />
work better in the same<br />
amount of space without<br />
the cost of buying an entire<br />
new machine! Quick and Easy: No hassle<br />
assembly takes only minutes. The cleverly<br />
designed motor unit allows it to operate with<br />
the shaft vertical or horizontal to run two<br />
machines. Multiple Use: Turns a single<br />
machine into several machines at a fraction of<br />
the cost without tying up your work space.<br />
Power Cabbing Made Easy: Kit includes (4) 8"<br />
diamond discs and a polishing pad to be used<br />
with included 8" Master Lap. Also includes 4<br />
oz. Polishing Powder. Will work with 6" or 8" laps<br />
inst10885 $279.95<br />
<strong>Lapidary</strong><br />
181
<strong>Lapidary</strong><br />
Universal <strong>Lapidary</strong> Machine<br />
The Universal Heavy Duty<br />
Grinding and Polishing<br />
<strong>Lapidary</strong> Machine.<br />
Designed for production use<br />
yet affordable for the<br />
hobbyist. With the 4 step<br />
finishing process easily<br />
refine gem material; both<br />
natural and synthetic.<br />
Among others, try stones<br />
such as quartz, agate,<br />
jasper, tourmaline, corundum and opal. As a<br />
horizontal lap machine, the Universal can grind<br />
flats, make free-form Cabochons, re-work<br />
quartz crystals, do Intarsia and detailed inlay<br />
work. The Universal is excellent for glass work.<br />
Often no fire polish is required. The clean,<br />
quiet Universal HD can be used in the house or<br />
in a recreational vehicle - Clean up is easy!<br />
Each machine includes: Variable Speed<br />
Ballbearing DC Motor with 115 VAC converter<br />
and coolant reservoir with splash guard 180<br />
Mesh Metal Bond Diamond Disc, hydraulically<br />
pressed to a backing plate 325 Mesh Diamond<br />
Sanding Disc 600 Mesh Diamond Sanding<br />
Disc 1200 Mesh Diamond Sanding Disc White<br />
Polish pad with 14,000 mesh diamond<br />
compound 4 disc backing plates Complete<br />
Instructions Specifications: Motor: 6" & 8"<br />
Machines - 1/4 HP equivalent Ball Bearing DC<br />
with 115 VAC Converter. Drive: Direct Drive on<br />
2" Flange Dimensions: 6" Universal - 12" x 12"<br />
x 7" 8" Universal - 12" x 12" x 7" Weight: 6"<br />
Universal - 16 lbs. including accessories.<br />
lap6in 6" universal lapidary machine-ea $529.00<br />
lap8in 8" universal lapidary machine-ea $629.00<br />
Speedster Blade Guide Set<br />
Blade Guide Fits on the<br />
Diamond Laser Speedster<br />
and 3000 saws.<br />
speedsterblade $7.00<br />
Vibrating tumbler<br />
Vibrating tumbler 18 Lb. or 10Lb.<br />
1.5 gallon capacity.<br />
Operates on 115 V.<br />
overload protected ball<br />
bearing motor. Vibrates at<br />
3000 vibrations per minute.<br />
11.5" diameter 12.5" tall.<br />
t180in vibrating tumbler 18 lb. capacity-ea $309.53<br />
t183in vibrating tumbler 10 lb. capacity-ea $230.63<br />
Tumbler Polish 120-220 Grit<br />
Tumbler fine first polishing<br />
grit, 120-220 grit. Sold in 4oz &<br />
1lbs quanities.<br />
t306 tumbler polish 120-220 grit 1/4 lb-ea $2.33<br />
t311 tumbler polish 120-220 grit 1lb-ea $6.53<br />
TUMBLER PRE-POLISH GRIT - 2 Oz.<br />
Tumbler Silica Dioxide prepolishing<br />
grit. Sold in 2oz & 8oz<br />
quantities<br />
182<br />
14" Rotary Cut Off Machine<br />
14" rotary cut off machine<br />
cuts larger diameter tubing<br />
with ease. Foot pedal<br />
stainless steel coolant tank<br />
and pump optional.<br />
nrc14 $6,195.00<br />
14" Wet Cut Off Machine<br />
12" and 14" Wheel<br />
Capacity. 5" Max Cutting<br />
Depth. 5" Table Stroke.<br />
115V, 1 HP, AC Motor.<br />
Adjustable Legs From<br />
36"-42". Coolant Feeds<br />
From Wheel Flanges.<br />
Removable Catch Tray<br />
Mounted Under Blade.<br />
Adjustable Work Fence<br />
Makes Cutting Angles More<br />
Easy. Shaft And Spindle Bearings Are<br />
Lubricated For Life. Waterproof Foot Pedal Is<br />
Optional.<br />
t307 tumbler pre-polish grit - 2 oz.-ea $2.33<br />
t312 tumbler pre-polish grit- 8 oz-ea $6.53<br />
Rotary Tumbler With 3 Lb. Capacity<br />
Rotary tumbler with 3 LB.<br />
capacity. Tumbler is<br />
overload protected and<br />
shuts off automatically<br />
when stressed.<br />
tar1 $101.89<br />
Ultrasonic Cleaner<br />
The Ultrasonic cleaner<br />
penetrates areas that can<br />
not be reached and shines<br />
all surfaces of any small<br />
object. Great to remove<br />
unwanted bead release<br />
from core of small beads.<br />
Also removes cerium oxide<br />
when polishing with lapidary<br />
machines.<br />
nws14 14" wet cut off machine-ea $3,200.00<br />
nws14ss 14" wet cut off machine w/ $3,800.00<br />
s.s. cab-ea<br />
uco303 $59.95<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147
Vise Assembly For 4" Trim Saw<br />
The vise assembly is a<br />
precision tool for holding<br />
valuable gems or glass<br />
material while trimming or<br />
slicing. The vise is made of<br />
rust-free aluminum and<br />
stainless steel hardware.<br />
This accessory is<br />
manufactured exclusively<br />
for the Ameritool 4" Trim<br />
Saw.<br />
tt02-357 $89.00<br />
Micron Lap<br />
Grit Micron Lap<br />
Replacement Wheel.<br />
micron laps attach to the<br />
top of your grinding plates<br />
to smooth glass to an even<br />
fine finish. These pads are<br />
considered to be a final<br />
grind before using the felt<br />
pad to polish your piece.<br />
Fits diamond max bevel<br />
grinder / lapidary machine.<br />
<strong>Lapidary</strong><br />
24-inch Diameter Disc Model<br />
FEATURES - No Center<br />
Post - Water Through<br />
Center Spindle - Forward<br />
and Reverse Switch -<br />
Heavy Welded Steel<br />
Chassis - Beige<br />
Hammertone Powder<br />
Baked Paint Finish - Heavy<br />
Duty Bearings Relube - 115<br />
Volt or 220 Volt - One Year<br />
Warranty on Motor and<br />
Bearings - Precision Ground Steel Plate for<br />
Magnetic Disc - Heavy Duty Steel Shaft with<br />
Welded Flange - Brush Guard - Removable<br />
Steel Guard - 24" Machine 1 ½ HP Dayton<br />
Motor<br />
dasw2400 $3,200.00<br />
Diamond Max Grinder +<br />
Upgrade Kit<br />
Diamond max grinder<br />
With upgrade kit to<br />
Make use as a<br />
<strong>Lapidary</strong> wheel.<br />
dt51 $299.95<br />
4" Diamond Cone<br />
Create your<br />
own beveled edges.<br />
Diamond cone set gives<br />
you ability to grind, bevel<br />
and polish inside curves on<br />
3/16" and 1/4" glass. Full<br />
size 4" cones for use with<br />
diamond max lapidary<br />
machine. Cones are sold<br />
individually or as a cone set<br />
which includes 180 grit, 360 grit, resin pad, and<br />
Replacement Wheel<br />
Replacement Wheels Fits<br />
Diamond Max Bevel<br />
Grinder / <strong>Lapidary</strong> Machine<br />
felt pad.<br />
dt51-180cone 180 grit diamond cone 4"-ea $79.00<br />
dt51-360cone 360 grit diamond cone 4"-ea $79.00<br />
dt51-feltpadco felt pad cone 4"-ea $48.00<br />
dt51-resincone resin cone 4"-ea $48.00<br />
dt51-coneset diamond cone set of four 4" $234.00<br />
cones-ea<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
dt51-micronlap 15 grit micron lap-ea $20.00<br />
dt51-micronlap 60 grit micron lap-ea $20.00<br />
dt51-180 standard 180 grit whl-ea $70.95<br />
dt51-260 fine 260 grit wheel-ea $75.95<br />
White polishing pad<br />
White polishing pad<br />
attaches to the top of your<br />
grinding plates to smooth<br />
glass to an flawless finish.<br />
These pads are considered<br />
to be the final polish for<br />
your piece. Fits diamond<br />
max bevel grinder / lapidary<br />
machine.<br />
dt51-polishpad $16.50<br />
Cameo Edge Groove Diamond Bit<br />
This bit attaches to any<br />
grinder! Great for cutting a<br />
groove in the edge of<br />
cabochons for wire<br />
wrapping. This bit is<br />
diamond coated and cuts a<br />
groove in the edge of<br />
your glass or stone. Groove<br />
fits 20/22 ga. wires. Tool<br />
has fine grit diamond for<br />
smooth, chip free grooves.<br />
in40190<br />
in40194<br />
cameo edge groove<br />
diamond bit 1mm-ea<br />
cameo edge groove<br />
diamond bit 1.4mm-ea<br />
$24.95<br />
$24.95<br />
183
<strong>Lapidary</strong><br />
Diamond Laser Speedster XL Band Saw<br />
The Speedster XL is a dream machine! Easy to assemble with preset blade<br />
tracking and tensioning. Speedster XL has two new preset speeds! Dual speed<br />
control allows you to cut at a low rate of 10" per minute a high rate of 22" per<br />
minute. Its improved water nozzle and guide-mounting block offers better water flow<br />
to the front of the blade increasing cooling and lubrication. New lower wheel drain<br />
minimizes water build-up. The Speedster XL retains its best features:sturdy metal<br />
inner frame, large capacity cooling system, 2-long lasting seamless stainless steel<br />
blades, 9" X 10" cutting table, angle cutting guide, a powerful yet quiet 1/8 hp direct<br />
drive motor for smooth cutting every time. 3-year warranty. Dual speed action and<br />
versatility make the Speedster XL the dream cutting machine.specifications<br />
Max. Horsepower 1/8 HP Blade Length 36"<br />
Throat Depth 5" Height 19" Width 13" Length<br />
10" Weight 14 lb. Table Size 9" X 10" Minimum<br />
Cutting Radius 0.25" Cutting Speed Low 10"<br />
per min. High 22" per min. diamondlasersp $256.00<br />
184<br />
4X1.5" SINTERED GRIND WHEEL<br />
Sintered Diamond Grinding<br />
Wheels are excellent for<br />
having extra long life in<br />
comparison to single layer<br />
wheels. They are made for<br />
grinding harder materials.<br />
Diameter: 4.0" (102mm)<br />
Weight: 3.5 Lbs.<br />
Arbor: 1" OD arbor standard<br />
in414065 60 grit sintered grind whl 4x1.5"-ea $249.95<br />
in414085 80 grit sintered grind whl 4x1.5"-ea $249.95<br />
in414105 100 grit sintered grind whl 4x1.5"-ea $249.95<br />
in414145 140 grit sintered grind whl 4x1.5"-ea $249.95<br />
in414205 200 grit sintered grind whl 4x1.5"-ea $249.95<br />
DIAMOND BAND BLADE 37.7"<br />
Designed for maximum<br />
sawing smoothness and<br />
speed. Diamond blades are<br />
Diamond coated for<br />
superior wet sawing of<br />
Glass, Stone, Marble, Tile,<br />
and other mineral based<br />
materials. Blade Length:<br />
37.7". Diamond blades<br />
contain the finest quality<br />
diamond crystals - bonded<br />
to Stainless Steel with techniques Developed &<br />
Proven - by professional workers for over two<br />
decades.<br />
in90007 diamond band blade 37.7"-ea $64.95<br />
6.5" TRIM SAW BLADE<br />
The MetalCut blade<br />
designed for the SwapTop<br />
Trim saw, saws non-ferrous<br />
metals, plastics, leather and<br />
similar materials. All blades<br />
are crafted from hardened<br />
and tempered, high-carbon<br />
spring steel. Arbor holes are<br />
cut within minus .0000" and<br />
plus .00075" tolerance.<br />
Toothed blades are cut on<br />
precision equipment. Blade tooth shape, angle,<br />
and sharpness are true to each other within<br />
.003", for maximum sawing smoothness and<br />
speed. 24 Teeth Per Inch, Flat Teeth.<br />
in90960 metalcut 6.5" trim saw blade-ea $18.95<br />
in90964 woodcut 6.5" trim saw blade-ea $18.95<br />
114<br />
866.342.4764 www.ABRIMAGERY.com 812.339.9147<br />
Turbo Carver Bur Set And Caddy<br />
Complete bur set for the<br />
Turbo Carver with a caddy<br />
included.<br />
tcbc1 $104.65<br />
Swaptop 8" Flat Lap Worksurface Kit<br />
Second generation<br />
SwapTop Flat Lap<br />
Worksurface Kit. Will retrofit<br />
onto existing SwapTop<br />
machines.<br />
inst10886 $29.95<br />
Diamond Laser 5000 Blade Guide Set<br />
Blade Guide Fits on the<br />
Diamond Laser 5000 saws.<br />
dl5000bladegui $31.40<br />
Coolant Tank with Pump<br />
Stainless steel coolant tank<br />
with coolant pump.<br />
nsstwp $306.00<br />
White Pad Polishing Compound<br />
Polishing Compound For<br />
White Felt Pad On Diamond<br />
Max Machine. 4 Oz Bottle.<br />
dt51-polishc $9.95<br />
Aluminum Nylon Coated Lap Rack<br />
An aluminum rack coated<br />
with a Nylon protectant<br />
holds up to six of your laps.<br />
laprack $22.95