Cotterman® - Safety Ladders Express
Cotterman® - Safety Ladders Express Cotterman® - Safety Ladders Express
FIXED STEEL LADDERS - SERIES F AND M Cotterman fixed steel ladders are designed for use where safe, solid vertical climbing access is required. Series F and Series M modular fixed steel ladders are available with and without walk-thru handrails at the top landing surface. Standard fixed and walk-thru models can be used up to 20' without safety cages. OSHA requires safety cages on ladder heights exceeding 20'. Separate cages are offered for updating older ladders to current safety standards. All Cotterman fixed ladders meet or exceed ANSI A14.3, OSHA 1910.27 and 1926.1053 standards. SPECIFICATIONS STANDARD WITH CAGE LENGTH: TOP TO SERIES “F” SERIES “M” SERIES “F” OVERALL LENGTH BOTTOM RUNG NO. RUNGS MODEL NO. SHPG. WT. MODEL NO. MODEL NO. 3'3" 4'3" 5'3" 6'3" 7'3" 8'8" 9'3" 10'3" 11'3" 12'3" 13'3" 14'3" 15'3" 16'3" 17'3" 18'3" 19'3" 20'3" 3' 4' 5' 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 F4S F5S F6S F7S F8S F9S F10S F11S F12S F13S F14S F15S F16S F17S F18S F19S F20S - SERIES F FIXED LADDERS: Ladders are heavy duty one-piece welded assemblies. SERIES M MODULAR FIXED LADDERS: Ladders are heavy duty sub-assemblies, no section is greater than 7' in length. CONSTRUCTION FEATURES: • Side members are 1 /4"x2"x2" steel angle. Climbing rungs are 3 /4" corrugated steel round rungs space on 12" centers. Stand-off brackets are 7". • Gray powder coat finish is standard color, yellow available. FIXED LADDERS WITH SAFETY CAGES: Standard fixed steel ladders are combined with safety cage protection. They are available in 10' through 29' sizes and are ideal for hatch-way or side step landing access. CAGE FEATURES: • OSHA design safety cages have flared bottom opening for easy entry. • Left or right side step access cage designs are available at no charge. • Cage begins 7' from bottom of ladder. • Gray powder coat finish, yellow available. 41 50 58 66 75 87 95 104 112 120 129 137 149 158 166 174 183 - SHPG. WT. OSHA NOTE: Although not required by OSHA, safety caging is offered on 11 thru 20 rung models. M11SC M12SC M13SC M14SC M15SC M16SC M17SC M18SC M19SC M20SC M21SC F11SC F12SC F13SC F14SC F15SC F16SC F17SC F18SC F19SC F20SC F21SC 202 223 243 260 274 299 318 338 346 368 388 21'3" 21' 22 M22SC F22SC 406 22'3" 22' 23 OSHA NOTE: M23SC F23SC 421 Fixed ladder 23'3" 23' 24 M24SC F24SC 442 heights 24'3" 24' 25 exceeding 20' M25SC F25SC 462 25'3" 25' 26 are required to M26SC F26SC 482 26'3" 26' 27 have safety M27SC F27SC 508 27'3" 27' 28 caging. M28SC F28SC 528 28'3" 28' 29 M29SC F29SC 548 29'3" 29' 30 M30SC F30SC 568 OSHA NOTE: Heights exceeding 30' require a standoff platform (see option model SP) SHIPPING NOTE: All 15 thru 28 rung Series F models with cages ship in 2 sections. All 29 and 30 rung models ship in 3 sections. 14. HOT DIP GALVANIZED FINISH OR STAINLESS STEEL CONTSTRUCTION CAN BE QUOTED. OVERALL LENGTH 6'8" 7'8" 8'8" 9'8" 10'8" 11'8" 12'8" 13'8" 14'8" 15'8" 16'8" 17'8" 18'8" 19'8" 20'8" 21'8" 22'8" 23'8" 24'8" 25'8" 26'8" 27'8" 28'8" 29'8" 30'8" 31'8" 32'8" SPECIFICATIONS LENGTH: TOP TO BOTTOM RUNG 3' 4' 5' 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' NO. RUNGS 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 FIXED LADDER WITH WALK-THRU HANDRAILS AND SAFETY CAGES: Designed for safe landing access and available from 10' to 29'. Cages and walk-thru handrails extend 42" above landing surface. CAGE FEATURES: • Safety cages are designed to OSHA specifications with flared bottom opening for easy entry. • Cage begins 7' from bottom of ladder. • Gray powder coat finish, yellow available. WALK-THRU RAIL WITH WALK THRU & CAGE SERIES SERIES SERIES “F” “M” “F” MODEL SHPG. MODEL MODEL SHPG. NO. WT. NO. NO. WT. F4W F5W F6W F7W F8W F9W F10W F11W F12W F13W F14W F15W F16W F17W F18W F19W F20W - FIXED LADDER WITH WALK-THRU HANDRAILS: Ladders are designed for applications where safe landing access is required. They are one-piece welded assemblies for use in applications less than 20' in vertical height. CONSTRUCTION FEATURES: • Side members are 1 /4"x2"x2" steel angle. 3 /4" corrugated steel round climbing rungs on 12" centers. Stand-off mounting brackets are 7". • Walk-thru handrails extend 42" above landing surface. Mounting brackets included. • Welded one-piece, gray powder coat finish, yellow available. 68 77 85 93 102 114 122 131 139 147 158 166 178 185 193 201 210 - OSHA NOTE: Although not required by OSHA, safety caging is offered on 8 thru 20 rung M11WC M12WC M13WC M14WC M15WC M16WC M17WC M18WC M19WC M20WC M21WC F8WC F9WC F10WC F11WC F12WC F13WC F14WC F15WC F16WC F17WC F18WC F19WC F20WC F21WC 21' 22 M22WC F22WC 22' 23 OSHA NOTE: M23WC F23WC 23' 24 Fixed ladder M24WC F24WC 24' 25 heights M25WC F25WC 25' 26 exceeding 20' are M26WC F26WC 26' 27 required to M27WC F27WC 27' 28' 28 29 have safety caging. M28WC M29WC F28WC F29WC 29' 30 M30WC F30WC OSHA NOTE: Heights exceeding 30' require a standoff platform (see option model SP) SHIPPING NOTE: All 15 thru 25 rung Series F models with cages ship in 2 sections. All 26 thru 30 rung models ship in 3 sections. HOT DIP GALVANIZED FINISH OR STAINLESS STEEL CONTSTRUCTION CAN BE QUOTED. 212 224 232 241 262 282 299 313 338 357 377 385 407 427 445 460 481 501 521 547 567 587 607
FIXED STEEL LADDER ACCESSORIES OPTION SP STANDOFF LANDING PLATFORM: Standoff landing platforms with offset caged ladders are required by OSHA Standard 1910.27 at 30' maximum height intervals. These rugged, pre-engineered platforms are constructed with left or right entries as required. Load rating is 300 lbs. OPTION LG OPTION CG SECURITY CAGE ENTRY GATE: The cage security gate is designed to prevent unauthorized entry into the bottom of the ladder cage. Doors have lockable hasp for complete security. SECURITY LADDER GUARD: The ladder guard is mounted directly over the ladder climbing rungs to prevent unauthorized use. It is available in either 6' or 8' lengths. The guard has a one piece piano hinge, and is furnished with lock-open and lockclosed hasps. OPTION D3 SAFETY CHAIN ATTACHMENT: The safety chain attachment is used on the walk-thru handrails to prevent accidental exit from the top landing surface. WELDED STEEL CAGES COTTERMAN SERIES C WELDED STEEL CAGES are one-piece welded assemblies designed for attachment to existing fixed ladders up to 20" wide. A wide range of standard lengths is offered with custom sizes available. To determine the proper length, the cage should begin 7' to 8' from the floor and extend 42" above the landing surface (except for hatchways). FEATURES: • Series C cages are designed in compliance with OSHA Standards 1910.27 • Standard cage lengths are available from 7'6" to 27'6". • Cages are crated for shipping protection. • Wider bottom flare openings are provided for easy entry. • One-piece all welded steel with gray powder coat finish. NO. STEP RUNGS 2 3 4 5 6 7 8 9 10 NO. STEP RUNGS 2 3 4 5 6 7 8 9 10 LENGTH 7'6" 8'6" 9'6" 10'6" 11'6" 12'6" 13'6" 14'6" 15'6" 16'6" 17'6" 18'6" 19'6" 20'6" 21'6" 22'6" 23'6" 24'6" 25'6" 26'6" 27'6" TOTAL RUNGS 6 7 8 9 10 11 12 13 14 DIM. A 1'6" 2'6" 3'6" 4'6" 5'6" 6'6" 7'6" 8'6" 9'6" MODEL NO. C075 C085 C095 C105 C115 C125 C135 C145 C155 C165 C175 C185 C195 C205 C215 C225 C235 C245 C255 C265 C275 DIM. B 6' 7' 8' 9' 10' 11' 12' 13' 14' SHPG. WT. 36 39 45 49 56 60 64 68 73 SHPG. WT. 234 268 291 313 336 370 393 415 438 472 494 517 539 574 596 619 560 675 698 720 743 WELDED STEEL DOCK LADDERS One-piece welded assemblies that provide safe access to docks and mezzanines. Walk-thru models have 42" high handrails. Side step models have step rungs plus 4 additional hand rungs. Load rating is 300 lbs. FEATURES: • Constructed of 1 1 /4" tube with 3 /4" non-slip solid round rungs. • 18" wide steps on side step models and 24" on walk-thru models, spaced on 12" centers. • Walk-thru models have flat supports for easy mounting. • Gray powder coat is standard finish. SHPG. WT. 37 40 46 50 57 61 66 70 75 MODEL NO. D2WT D3WT D4WT D5WT D6WT D7WT D8WT D9WT D10WT MODEL NO. D2SS D3SS D4SS D5SS D6SS D7SS D8SS D9SS D10SS WALK-THRU 4 RUNG - D4WT LEFT OR RIGHT EXITS AVAILABLE SIDE STEP 7 RUNG - D3SS 15.
- Page 1 and 2: BULLETIN DC-102 Cotterman ® rollin
- Page 3 and 4: Cotterman ® COTTERMAN SERIES 1000
- Page 5 and 6: 50 DESCRIPTION: NO. OF STEPS INCLUD
- Page 7 and 8: WELDED ALUMINUM SAFETY LADDERS SERI
- Page 9 and 10: FOLDS FOR EASY TRANSPORTING MODEL N
- Page 11 and 12: SERIES 3000 ACCESS LADDERS—TWIN S
- Page 13: ROLLING WOOD LADDERS ALL COTTERMAN
- Page 17 and 18: PROTECTS PERSONNEL FROM ACCIDENTALL
- Page 19 and 20: MODEL ML-256BH ELECTRO/HYDRAULIC GR
FIXED STEEL<br />
LADDER<br />
ACCESSORIES<br />
OPTION SP<br />
STANDOFF LANDING<br />
PLATFORM: Standoff landing<br />
platforms with offset<br />
caged ladders are required<br />
by OSHA Standard 1910.27<br />
at 30' maximum height<br />
intervals. These rugged,<br />
pre-engineered platforms<br />
are constructed with left or<br />
right entries as required.<br />
Load rating is 300 lbs.<br />
OPTION LG<br />
OPTION CG<br />
SECURITY CAGE<br />
ENTRY GATE: The<br />
cage security gate is<br />
designed to prevent<br />
unauthorized entry<br />
into the bottom of the<br />
ladder cage. Doors<br />
have lockable hasp for<br />
complete security.<br />
SECURITY LADDER<br />
GUARD: The ladder guard<br />
is mounted directly over<br />
the ladder climbing rungs<br />
to prevent unauthorized<br />
use. It is available in either<br />
6' or 8' lengths. The guard<br />
has a one piece piano<br />
hinge, and is furnished<br />
with lock-open and lockclosed<br />
hasps.<br />
OPTION D3<br />
SAFETY CHAIN<br />
ATTACHMENT: The<br />
safety chain attachment<br />
is used on the<br />
walk-thru handrails to<br />
prevent accidental exit<br />
from the top landing<br />
surface.<br />
WELDED STEEL CAGES<br />
COTTERMAN SERIES C WELDED STEEL CAGES are one-piece welded<br />
assemblies designed for attachment to existing fixed ladders up to 20" wide. A wide range of<br />
standard lengths is offered with custom sizes available. To determine the proper length, the<br />
cage should begin 7' to 8' from the floor and extend 42" above the landing surface (except for<br />
hatchways).<br />
FEATURES:<br />
• Series C cages are designed in compliance with OSHA Standards 1910.27<br />
• Standard cage lengths are available from 7'6" to 27'6".<br />
• Cages are crated for shipping protection.<br />
• Wider bottom flare openings are provided for easy entry.<br />
• One-piece all welded steel with gray powder coat finish.<br />
NO.<br />
STEP<br />
RUNGS<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
NO.<br />
STEP<br />
RUNGS<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
LENGTH<br />
7'6"<br />
8'6"<br />
9'6"<br />
10'6"<br />
11'6"<br />
12'6"<br />
13'6"<br />
14'6"<br />
15'6"<br />
16'6"<br />
17'6"<br />
18'6"<br />
19'6"<br />
20'6"<br />
21'6"<br />
22'6"<br />
23'6"<br />
24'6"<br />
25'6"<br />
26'6"<br />
27'6"<br />
TOTAL<br />
RUNGS<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
DIM.<br />
A<br />
1'6"<br />
2'6"<br />
3'6"<br />
4'6"<br />
5'6"<br />
6'6"<br />
7'6"<br />
8'6"<br />
9'6"<br />
MODEL<br />
NO.<br />
C075<br />
C085<br />
C095<br />
C105<br />
C115<br />
C125<br />
C135<br />
C145<br />
C155<br />
C165<br />
C175<br />
C185<br />
C195<br />
C205<br />
C215<br />
C225<br />
C235<br />
C245<br />
C255<br />
C265<br />
C275<br />
DIM.<br />
B<br />
6'<br />
7'<br />
8'<br />
9'<br />
10'<br />
11'<br />
12'<br />
13'<br />
14'<br />
SHPG.<br />
WT.<br />
36<br />
39<br />
45<br />
49<br />
56<br />
60<br />
64<br />
68<br />
73<br />
SHPG.<br />
WT.<br />
234<br />
268<br />
291<br />
313<br />
336<br />
370<br />
393<br />
415<br />
438<br />
472<br />
494<br />
517<br />
539<br />
574<br />
596<br />
619<br />
560<br />
675<br />
698<br />
720<br />
743<br />
WELDED STEEL DOCK LADDERS<br />
One-piece welded assemblies that provide safe access to docks and mezzanines.<br />
Walk-thru models have 42" high handrails. Side step models have step rungs<br />
plus 4 additional hand rungs. Load rating is 300 lbs.<br />
FEATURES:<br />
• Constructed of 1 1 /4" tube with 3 /4" non-slip solid<br />
round rungs.<br />
• 18" wide steps on side step models and 24" on<br />
walk-thru models, spaced on 12" centers.<br />
• Walk-thru models have flat supports for easy<br />
mounting.<br />
• Gray powder coat is standard finish.<br />
SHPG.<br />
WT.<br />
37<br />
40<br />
46<br />
50<br />
57<br />
61<br />
66<br />
70<br />
75<br />
MODEL<br />
NO.<br />
D2WT<br />
D3WT<br />
D4WT<br />
D5WT<br />
D6WT<br />
D7WT<br />
D8WT<br />
D9WT<br />
D10WT<br />
MODEL<br />
NO.<br />
D2SS<br />
D3SS<br />
D4SS<br />
D5SS<br />
D6SS<br />
D7SS<br />
D8SS<br />
D9SS<br />
D10SS<br />
WALK-THRU<br />
4 RUNG - D4WT<br />
LEFT OR<br />
RIGHT EXITS<br />
AVAILABLE<br />
SIDE STEP<br />
7 RUNG - D3SS<br />
15.
Change language