The LINOS Achromats and Lens Systems - Qioptiq Q-Shop

The LINOS 

Achromats 

and Lens 

Systems 

Achromats

The LINOS Achromats 

and Lens Systems 

Mounted or unmounted, coated or uncoated, 

with positive or negative focal lengths, 

LINOS achromatic lenses can fulfill every one 

of your optical requirements and exemplify 

our continued expertise in manufacturing 

complex optics. 

LINOS achromatic lenses ensure consistently 

high imaging quality with resolutions that 

approach the theoretical diffraction limit. 

Laser centering and continuous, strict quality 

control guarantee the highest standards for 

surface form and alignment of the curvature 

center in every single achromatic lens that 

leaves our factory. Compare for yourself! 

LINOS quality criteria: 

• High-quality materials from established 

manufacturers (Schott & Ohara) 

• Extremely narrow focal length 

tolerances 

• Minimal chromatic length aberration 

• Minimal spherical aberration 

• Minimal wavefront distortion 

(between λ /4 and λ /10) 

• Compatible with LINOS and other 

bench systems 

! 

Special features: 

All relevant structural data (radii, 

center thicknesses, materials) can 

be found in our WinLens optics 

software package. Broadband anti-reflective 

coatings and customer-specific 

coatings are available. 

Ideal areas of application: 

Beam focusing; imaging systems; 

fiber collimation. 

390 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500

Achromats and Lens Systems 

Technical Information 392 

Achromats, positive 

Achromats, Positive; dia. 3 mm to 31.5 mm, 

unmounted 394 

Achromats, Positive; dia. 3 mm to 31.5 mm, 

mounted 398 

Achromats, Positive from 40 mm diameter, 

unmounted 402 

Achromats NIR, Positive from 40 mm diameter, 

unmounted 404 

UV-VIS Achromats, mounted 405 

Achromats, negative 

Achromats, Negative 406 

Condensers 

Condenser combination, f = 16 mm, crown glass 408 

Condenser combination, f = 16 mm, fused silica 408 

Fiber light guide with condenser 409 

Hyperchromats 

Hyperchromats 410 

Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420 

391

Singlets 

Technical Information 

In the design of the LINOS achromats 

special attention was paid to the coma 

correction close to the axis (observance 

of the Abbe‘s sine conditions). This type 

of correction makes the system insensitive 

to slight tilting. This way, small, 

extended objects can be mapped very 

well. 

Achromat with a crown glass and a flint glass lens 

An achromat with a positive refractive 

power consists of a convex crown glass 

lens with low dispersion (color splitting) 

and a concave flint glass lens with a high 

dispersion. 

The lenses are matched such that the 

variation of the focus position of the 

overall system is minimized for two 

selected wavelengths. A modern 

chromatic (color) correction of the focus 

position is calculated for the Fraunhofer 

lines C’ (479.9914 nm) and F’ (643.8469 

nm). The remaining variation of the 

focus position (secondary spectrum), e.g. 

to the e-line (546.074 nm), is typically 

below 0.1% of the focal length. 

In addition, the spherical aberration can 

be minimized by suitable geometry and 

material selections. LINOS achromats are 

especially well corrected against spherical 

aberration and are therefore very good 

for monochrome applications for 

optimum focusing and/or collimating 

with minimum wave front deformation, 

e.g. of laser light. 

Achromats are optimized for imaging 

remote objects. Therefore, they achieve 

their best imaging performance with 

light incidence parallel to the axis (e.g. 

focusing collimated laser radiation). 

Achromats are asymmetric; therefore 

one must observe a correct alignment in 

the beam path. Typically, the more 

strongly curved the surface faces are the 

more parallel the light is. 

All LINOS achromats are laser-centered 

and therefore have an excellent 

alignment of the center of curvature 

(optical axis) to the edge of the achromat. 

In combination with high demands 

on the surface shape, this ensures a 

constant high imaging quality. This 

optical imaging performance is subject of 

strict quality control. Typical wave front 

deformations are in a range between 

Lambda/4 and Lambda/10. 

The modulation transfer function (MTF) 

illustrates the high imaging quality. This 

type of graph shows the resolution 

capacity in dependence of the resolution 

of the object or image structure (also see 

the chapter “Technical Information on 

Optics“. The resolution is usually close to 

the theoretical diffraction limit. 

Monochromatic MTF curve for achromat with 

f=200 mm / Ø = 31.5 mm 

Comparison of the wavelength-dependent focal length 

change of a single lens and an achromat 

Poly- and monochromatic MTF curve for achromat with 

f = 200 mm / Ø 31.5 mm 

Polychromatic MTF curve for achromat with 

f=120 mm / Ø 25.4 mm 

392 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500


LINOS achromats are available with two 

different coatings. 

Both coatings are hard and scratchproof 

anti-reflective coatings. 


Besides the ARB2 VIS for the visible 

spectral range, the selection of all 

microbench-compatible elements was 

supplemented with the ARB2 NIR for 

applications in the near infrared 

spectrum. 

ARB2 Broadband-anti-reflective coating for VIS, 

Transmission for 450-700 nm > 99 % 

Please refer to the reflection diagrams 

for the characteristics of both coatings. 

One outstanding feature of both 

coatings is the low reflection of our 

achromats, which is < 0.5 % for the 

stated wavelength range. 

ARB2 Broadband-anti-reflective coating for NIR, 

Transmission for 725-1,200 nm > 99 % 

StandardPlus 

If you require standard lenses with a smaller diameter please contact 

our sales team for a quick price information. We can easily downsize 

our standard lenses as StandardPlus-option. 


393

Singlets 

Achromats, Positive; dia. 3 mm to 31.5 mm, unmounted 

• Minimal longitudinal chromatic 

aberration 



• Tight focal length tolerance 

• Broadband anti-reflection coated 

• Two coatings available 

• Cemented doublets 

• Unmounted 

• Broadband anti-reflection coating 

ARB2 VIS or ARB2 NIR 

• Damage thresholds > 2 kW/cm 2 cw 

(488/514 nm) 

• Damage thresholds > 200 mJ/cm 2 for 

pulses of 10 ns (1064 nm) 

Diameter 

(mm) 

Surface quality 

regarding ISO 10110 

Ø Tolerance 

(mm) 

3-6 3x0.1 -0.03 ±0.2 

8-12.5 3x0.16 -0.05 ±0.2 

18 5x0.16 -0.05 ±0.2 

22.4-25.4 3x0.16 -0.06 ±0.2 

31.5 5x0.25 -0.07 ±0.2 

Centering accuracy: better than 4‘ 

dm Tolerance 

(mm) 

A closer look 

All the relevant specifications of 

the lenses, such as materials, radii 

and center thicknesses, are included 

in the database of the LINOS 

WinLens optical design software. 

A freeware version of this program 

is available for download at 

www.winlens.de. 


f' (mm) Ø (mm) Coating dm(mm) dr (mm) h' (mm) s' 546nm 

(mm) f' 546nm 

(mm) Order-No 

4 3 ARB2 VIS 2.4 1.8 0.2 2.83 4.00 G32 2218 000 

5 3 ARB2 VIS 3.1 2.6 0.2 3.60 5.00 G32 2219 000 

6 3 ARB2 VIS 2.7 2.2 0.1 4.68 5.95 G32 2250 000 

8 6 ARB2 VIS 5.0 3.7 0.4 5.48 8.00 G32 2220 000 

10 6 ARB2 VIS 3.0 2.1 0.2 8.88 10.38 G32 2206 000 

13 6 ARB2 VIS 4.9 4.1 0.2 10.53 13.00 G32 2222 000 

18 6 ARB2 VIS 3.7 3.2 0.1 16.07 18.00 G32 2223 000 

16 8 ARB2 VIS 3.5 2.4 0.2 14.53 16.32 G32 2207 000 

20 10 ARB2 VIS 4.1 2.8 0.3 18.44 20.60 G32 2201 000 

25 12.5 ARB2 VIS 5.5 4.0 0.3 22.38 25.33 G32 2284 000 

30 12.5 ARB2 VIS 5.0 3.7 0.3 27.59 30.24 G32 2285 000 

35 12.5 ARB2 VIS 5.0 3.9 0.2 32.39 35.04 G32 2286 000 

40 12.5 ARB2 VIS 6.3 5.1 0.4 37.24 40.09 G32 2337 000 

45 12.5 ARB2 VIS 5.5 4.4 0.3 42.51 45.02 G32 2338 000 

50 12.5 ARB2 VIS 5.0 4.1 0.3 47.65 50.01 G32 2339 000 

60 12.5 ARB2 VIS 5.3 4.5 0.3 57.69 59.99 G32 2341 000 

80 12.5 ARB2 VIS 5.5 5.1 0.2 77.57 79.94 G32 2343 000 

100 12.5 ARB2 VIS 5.3 4.8 0.2 97.81 99.99 G32 2345 000 

394 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500


f focal length 

s object distance 

s' image distance 

Ø lens diameter 

dm center thickness 

dr edge thickness 

h primary vertex (h=dm-dr-h') 

h' sagittal height secondary vertex 

F, F' focal points 

H, H' principal points 


Tolerances: 

Focal length f: ±1% 

Image distance s': ±1% 

Statement 

"The MPS (Max-Planck Institute) relies on special optics made by LINOS. In addition 

to the well established reputation that LINOS has in the field of solar 

physics, the proximity of the MPS to Göttingen, and the direct contact this affords, 

also played a role in this decision." 

From "Balloon-borne telescope SUNRISE," in Optolines no. 14, 2nd quarter, 

2007. The quote is from one of the staff at the Max Planck Institute of Solar 

System Research in Katlenburg-Lindau, Germany. 



(mm) f' 546nm 

(mm) Order-No 

300 12.5 ARB2 VIS 4.0 3.8 0.1 297.57 299.85 G32 2348 000 

40 18 ARB2 VIS 7.0 4.5 0.6 36.04 40.16 G32 2209 000 

50 18 ARB2 VIS 6.5 4.6 0.3 45.95 50.04 G32 2265 000 

60 18 ARB2 VIS 6.0 4.4 0.2 56.33 60.11 G32 2266 000 

80 18 ARB2 VIS 5.8 4.6 0.2 76.62 80.13 G32 2210 000 

100 18 ARB2 VIS 5.8 4.8 0.1 96.43 100.11 G32 2236 000 

50 22.4 ARB2 VIS 7.5 5.2 0.4 45.76 50.04 G32 2321 000 

60 22.4 ARB2 VIS 7.0 5.1 0.4 56.74 60.47 G32 2322 000 

80 22.4 ARB2 VIS 7.0 5.1 0.6 77.05 80.34 G32 2323 000 

100 22.4 ARB2 VIS 9.0 7.5 0.5 95.89 100.16 G32 2324 000 

140 22.4 ARB2 VIS 8.0 6.9 0.4 136.20 140.07 G32 2326 000 

200 22.4 ARB2 VIS 6.0 5.2 0.2 197.38 200.26 G32 2328 000 

500 22.4 ARB2 VIS 6.0 5.7 0.1 495.99 499.43 G32 2329 000 

60 25.4 ARB2 VIS 8.9 6.2 0.7 55.47 60.10 G32 2306 322 

80 25.4 ARB2 VIS 7.0 4.6 0.8 77.05 80.34 G32 2307 322 

100 25.4 ARB2 VIS 9.0 7.1 0.6 95.89 100.16 G32 2308 322 

120 25.4 ARB2 VIS 7.0 5.4 0.5 116.77 120.10 G32 2309 322 

140 25.4 ARB2 VIS 8.0 6.6 0.5 136.20 140.07 G32 2351 000 

160 25.4 ARB2 VIS 8.6 7.4 0.4 155.95 160.00 G32 2352 000 

200 25.4 ARB2 VIS 6.0 5.0 0.3 197.38 200.26 G32 2353 000 

300 25.4 ARB2 VIS 7.0 6.4 0.2 297.19 300.23 G32 2354 000 

500 25.4 ARB2 VIS 6.0 5.5 0.1 495.99 499.43 G32 2355 000 

80 31.5 ARB2 VIS 10.5 6.7 1.2 74.84 80.10 G32 2287 322 

100 31.5 ARB2 VIS 9.5 6.5 1.0 95.34 100.09 G32 2288 322 

120 31.5 ARB2 VIS 9.5 7.0 0.8 115.60 119.91 G32 2269 322 

140 31.5 ARB2 VIS 8.0 5.9 0.7 136.20 140.07 G32 2239 322 

150 31.5 ARB2 VIS 8.6 6.6 0.7 145.85 150.03 G32 2227 322 

160 31.5 ARB2 VIS 8.6 6.7 0.6 155.95 160.00 G32 2270 322 

200 31.5 ARB2 VIS 7.0 5.5 0.4 197.21 200.41 G32 2271 322 

250 31.5 ARB2 VIS 7.0 5.8 0.4 247.42 250.45 G32 2272 322 

300 31.5 ARB2 VIS 7.0 6.0 0.3 297.19 300.23 G32 2273 322 

400 31.5 ARB2 VIS 7.0 6.3 0.2 397.05 400.08 G32 2275 322 

600 31.5 ARB2 VIS 7.0 6.5 0.2 597.30 600.34 G32 2277 322 


395

Singlets 



(mm) f' 546nm 

(mm) Order-No 

4 3 ARB2 NIR 2.4 1.8 0.2 2.83 4.00 G32 2218 525 

8 6 ARB2 NIR 5.0 3.7 0.4 5.48 8.00 G32 2220 525 

10 6 ARB2 NIR 3.0 2.1 0.2 8.88 10.38 G32 2206 525 

13 6 ARB2 NIR 4.9 4.1 0.2 10.53 13.00 G32 2222 525 

16 8 ARB2 NIR 3.5 2.4 0.2 14.53 16.32 G32 2207 525 

20 10 ARB2 NIR 4.1 2.8 0.3 18.44 20.60 G32 2201 525 

25 12.5 ARB2 NIR 5.5 4.0 0.3 22.38 25.33 G32 2284 525 

30 12.5 ARB2 NIR 5.0 3.7 0.3 27.59 30.24 G32 2285 525 

35 12.5 ARB2 NIR 5.0 3.9 0.2 32.39 35.04 G32 2286 525 

40 12.5 ARB2 NIR 6.3 5.1 0.4 37.24 40.09 G32 2337 525 

45 12.5 ARB2 NIR 5.5 4.4 0.3 42.51 45.02 G32 2338 525 

50 12.5 ARB2 NIR 5.0 4.1 0.3 47.65 50.01 G32 2339 525 

60 12.5 ARB2 NIR 5.3 4.5 0.3 57.69 59.99 G32 2341 525 

80 12.5 ARB2 NIR 5.5 5.1 0.2 77.57 79.94 G32 2343 525 

100 12.5 ARB2 NIR 5.3 4.8 0.2 97.81 99.99 G32 2345 525 

40 18 ARB2 NIR 7.0 4.5 0.6 36.04 40.16 G32 2209 525 

50 18 ARB2 NIR 6.5 4.6 0.3 45.95 50.04 G32 2265 525 

60 18 ARB2 NIR 6.0 4.4 0.2 56.33 60.11 G32 2266 525 

80 18 ARB2 NIR 5.8 4.6 0.2 76.62 80.13 G32 2210 525 

100 18 ARB2 NIR 5.8 4.8 0.1 96.43 100.11 G32 2236 525 

50 22.4 ARB2 NIR 7.5 5.2 0.4 45.76 50.04 G32 2321 525 

80 22.4 ARB2 NIR 7.0 5.1 0.6 77.05 80.34 G32 2323 525 

100 22.4 ARB2 NIR 9.0 7.5 0.5 95.89 100.16 G32 2324 525 

140 22.4 ARB2 NIR 8.0 6.9 0.4 136.20 140.07 G32 2326 525 

200 22.4 ARB2 NIR 6.0 5.2 0.2 197.38 200.26 G32 2328 525 

500 22.4 ARB2 NIR 6.0 5.7 0.1 495.99 499.43 G32 2329 525 

60 25.4 ARB2 NIR 8.9 6.2 0.7 55.47 60.10 G32 2306 525 

80 25.4 ARB2 NIR 7.0 4.6 0.8 77.05 80.34 G32 2307 525 

100 25.4 ARB2 NIR 9.0 7.1 0.6 95.89 100.16 G32 2308 525 

120 25.4 ARB2 NIR 7.0 5.4 0.5 116.77 120.10 G32 2309 525 

140 25.4 ARB2 NIR 8.0 6.6 0.5 136.20 140.07 G32 2351 525 

160 25.4 ARB2 NIR 8.6 7.4 0.4 155.95 160.00 G32 2352 525 

200 25.4 ARB2 NIR 6.0 5.0 0.3 197.38 200.26 G32 2353 525 

300 25.4 ARB2 NIR 7.0 6.4 0.2 297.19 300.23 G32 2354 525 

500 25.4 ARB2 NIR 6.0 5.5 0.1 495.99 499.43 G32 2355 525 

80 31.5 ARB2 NIR 10.5 6.7 1.2 74.84 80.10 G32 2287 525 

100 31.5 ARB2 NIR 9.5 6.5 1.0 95.34 100.09 G32 2288 525 

120 31.5 ARB2 NIR 9.5 7.0 0.8 115.60 119.91 G32 2269 525 

140 31.5 ARB2 NIR 8.0 5.9 0.7 136.20 140.07 G32 2239 525 

150 31.5 ARB2 NIR 8.6 6.6 0.7 145.85 150.03 G32 2227 525 

160 31.5 ARB2 NIR 8.6 6.7 0.6 155.95 160.00 G32 2270 525 

200 31.5 ARB2 NIR 7.0 5.5 0.4 197.21 200.41 G32 2271 525 

250 31.5 ARB2 NIR 7.0 5.8 0.4 247.42 250.45 G32 2272 525 

300 31.5 ARB2 NIR 7.0 6.0 0.3 297.19 300.23 G32 2273 525 

400 31.5 ARB2 NIR 7.0 6.3 0.2 397.05 400.08 G32 2275 525 

600 31.5 ARB2 NIR 7.0 6.5 0.2 597.30 600.34 G32 2277 525 





396 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500


High quality 

Take advantage of more than 130 years of experience in the manufacturing 

of precision optics and precision mechanical components and 

systems. 


Manufacturing in Germany, Göttingen (about 1910) 


397

Singlets 

Achromats, Positive; dia. 3 mm to 31.5 mm, mounted 


aberration 





• Two coatings available 

• Achromats in Nanobench n and 

Microbench Í mounts fitting directly 

to these LINOS systems 



ARB2 VIS or ARB2 NIR 


(488/514 nm) 



Diameter 

(mm) 



Ø Tolerance 

(mm) 

3-6 3x0.1 -0.03 ±0.2 

8-12.5 3x0.16 -0.05 ±0.2 

18 5x0.16 -0.05 ±0.2 

22.4-25.4 3x0.16 -0.06 ±0.2 

31.5 5x0.25 -0.07 ±0.2 


dm Tolerance 

(mm) 


Mount 

f' 

(mm) 

Optics-Ø 

(mm) 

Coating 

Outer-Ø 

D(mm) 

Clear-Ø 

(mm)*) 

dm 

(mm) 

dr 

(mm) 

h' 

(mm) 

s' 546nm 

 

(mm) 

f' 546nm 

 

(mm) 

Order-No 

n 4 3 ARB2 VIS 16 2.5 2.4 1.8 0.2 2.83 4.00 G05 2001 000 

n 5 3 ARB2 VIS 16 2.5 3.1 2.6 0.2 3.60 5.00 G05 2002 000 

n 6 3 ARB2 VIS 16 2.5 2.7 2.2 0.1 4.68 5.95 G05 2003 000 

n 8 6 ARB2 VIS 16 5.0 5.0 3.7 0.4 5.48 8.00 G05 2021 000 

n 10 6 ARB2 VIS 16 5.0 3.0 2.1 0.2 8.88 10.38 G05 2004 000 

n 13 6 ARB2 VIS 16 5.0 4.9 4.1 0.2 10.53 13.00 G05 2022 000 

n 18 6 ARB2 VIS 16 5.0 3.7 3.2 0.1 16.07 18.00 G05 2023 000 

n 16 8 ARB2 VIS 16 7.0 3.5 2.4 0.2 14.53 16.32 G05 2005 000 

n 20 10 ARB2 VIS 16 9.0 4.1 2.8 0.3 18.44 20.60 G05 2006 000 

n 25 12.5 ARB2 VIS 16 11.5 5.5 4.0 0.3 22.38 25.33 G05 2007 000 

n 30 12.5 ARB2 VIS 16 11.5 5.0 3.7 0.3 27.59 30.24 G05 2008 000 

n 35 12.5 ARB2 VIS 16 11.5 5.0 3.9 0.2 32.39 35.04 G05 2009 000 

n 40 12.5 ARB2 VIS 16 11.5 6.3 5.1 0.4 37.24 40.09 G05 2010 000 

n 45 12.5 ARB2 VIS 16 11.5 5.5 4.4 0.3 42.51 45.02 G05 2011 000 

n 50 12.5 ARB2 VIS 16 11.5 5.0 4.1 0.3 47.65 50.01 G05 2012 000 

n 60 12.5 ARB2 VIS 16 11.5 5.3 4.5 0.3 57.69 59.99 G05 2013 000 

n 80 12.5 ARB2 VIS 16 11.5 5.5 5.1 0.2 77.57 79.94 G05 2014 000 

n 100 12.5 ARB2 VIS 16 11.5 5.3 4.8 0.2 97.81 99.99 G05 2015 000 

n 300 12.5 ARB2 VIS 16 11.5 4.0 3.8 0.1 297.57 299.85 G05 2016 000 

n In mount fitting directly to Nanobench, 

see page 239 for mount dimensions. 

398 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500













Tolerances: 




Mount 

f' 

(mm) 

Optics-Ø 

(mm) 

Coating 

Outer-Ø 

D(mm) 

Clear-Ø 

(mm)*) 

dm 

(mm) 

dr 

(mm) 

h' 

(mm) 

s' 546nm 

 

(mm) 

f' 546nm 

 

(mm) 

Order-No 

Í 40 18 ARB2 VIS 25 17.0 7.0 4.5 0.6 36.04 40.16 G06 3127 000 

Í 50 18 ARB2 VIS 25 17.0 6.5 4.6 0.3 45.95 50.04 G06 3125 000 

Í 60 18 ARB2 VIS 25 17.0 6.0 4.4 0.2 56.33 60.11 G06 3126 000 

Í 80 18 ARB2 VIS 25 17.0 5.8 4.6 0.2 76.62 80.13 G06 3128 000 

Í 100 18 ARB2 VIS 25 17.0 5.8 4.8 0.1 96.43 100.11 G06 3129 000 

Í 50 22.4 ARB2 VIS 25 21.4 7.5 5.2 0.4 45.76 50.04 G06 3141 000 

Í 60 22.4 ARB2 VIS 25 21.4 7.0 5.1 0.4 56.74 60.47 G06 3142 000 

Í 80 22.4 ARB2 VIS 25 21.4 7.0 5.1 0.6 77.05 80.34 G06 3143 000 

Í 100 22.4 ARB2 VIS 25 21.4 9.0 7.5 0.5 95.89 100.16 G06 3144 000 

Í 140 22.4 ARB2 VIS 25 21.4 8.0 6.9 0.4 136.20 140.07 G06 3146 000 

Í 200 22.4 ARB2 VIS 25 21.4 6.0 5.2 0.2 197.38 200.26 G06 3148 000 

Í 500 22.4 ARB2 VIS 25 21.4 6.0 5.7 0.1 495.99 499.43 G06 3149 000 

Í 60 25.4 ARB2 VIS 30 24 8.9 6.2 0.7 55.47 60.10 G06 3212 000 

Í 80 25.4 ARB2 VIS 30 24 7.0 4.6 0.8 77.05 80.34 G06 3213 000 

Í 100 25.4 ARB2 VIS 30 24 9.0 7.1 0.6 95.89 100.16 G06 3214 000 

Í 120 25.4 ARB2 VIS 30 24 7.0 5.4 0.5 116.77 120.10 G06 3215 000 

Í 140 25.4 ARB2 VIS 30 24 8.0 6.6 0.5 136.20 140.07 G06 3235 000 

Í 160 25.4 ARB2 VIS 30 24 8.6 7.4 0.4 155.95 160.00 G06 3236 000 

Í 200 25.4 ARB2 VIS 30 24 6.0 5.0 0.3 197.38 200.26 G06 3237 000 

Í 300 25.4 ARB2 VIS 30 24 7.0 6.4 0.2 297.19 300.23 G06 3238 000 

Í 500 25.4 ARB2 VIS 30 24 6.0 5.5 0.1 495.99 499.43 G06 3239 000 

Í 80 31.5 ARB2 VIS 35 30 10.5 6.7 1.2 74.84 80.10 G06 3200 000 

Í 100 31.5 ARB2 VIS 35 30 9.5 6.5 1.0 95.34 100.09 G06 3201 000 

Í 120 31.5 ARB2 VIS 35 30 9.5 7.0 0.8 115.60 119.91 G06 3202 000 

Í 140 31.5 ARB2 VIS 35 30 8.0 5.9 0.7 136.20 140.07 G06 3203 000 

Í 150 31.5 ARB2 VIS 35 30 8.6 6.6 0.7 145.85 150.03 G06 3232 000 

Í 160 31.5 ARB2 VIS 35 30 8.6 6.7 0.6 155.95 160.00 G06 3204 000 

Í 200 31.5 ARB2 VIS 35 30 7.0 5.5 0.4 197.21 200.41 G06 3205 000 

Í 250 31.5 ARB2 VIS 35 30 7.0 5.8 0.4 247.42 250.45 G06 3206 000 

Í 300 31.5 ARB2 VIS 35 30 7.0 6.0 0.3 297.19 300.23 G06 3207 000 

Í 400 31.5 ARB2 VIS 35 30 7.0 6.3 0.2 397.05 400.08 G06 3208 000 

Í 600 31.5 ARB2 VIS 35 30 7.0 6.5 0.2 597.30 600.34 G06 3209 000 

Í 1330 31.5 ARB2 VIS 35 30 6.6 6.4 0.1 1326.3 1329.4 G06 3210 000 

Í In mount fitting directly to Microbench, 


High quality 

Qioptiq uses glass from established manufacturers in the production 

of fine optics components. This ensures the consistent high quality of 

our lenses, achromatic lenses and plano-optics. 


399

Singlets 


Mount 

f' 

(mm) 

Optics-Ø 

(mm) 

Coating 

Outer-Ø 

D(mm) 

Clear-Ø 

(mm)*) 

dm 

(mm) 

dr 

(mm) 

h' 

(mm) 

s' 546nm 

 

(mm) 

f' 546nm 

 

(mm) 

Order-No 

n 4 3 ARB2 NIR 16 2.5 2.4 1.8 0.2 2.83 4.00 G05 2001 525 

n 5 3 ARB2 NIR 16 2.5 3.1 2.6 0.2 3.60 5.00 G05 2002 525 

n 6 3 ARB2 NIR 16 2.5 2.7 2.2 0.1 4.68 5.95 G05 2003 525 

n 8 6 ARB2 NIR 16 5.0 5.0 3.7 0.4 5.48 8.00 G05 2021 525 

n 10 6 ARB2 NIR 16 5.0 3.0 2.1 0.2 8.88 10.38 G05 2004 525 

n 13 6 ARB2 NIR 16 5.0 4.9 4.1 0.2 10.53 13.00 G05 2022 525 

n 18 6 ARB2 NIR 16 5.0 3.7 3.2 0.1 16.07 18.00 G05 2023 525 

n 16 8 ARB2 NIR 16 7.0 3.5 2.4 0.2 14.53 16.32 G05 2005 525 

n 20 10 ARB2 NIR 16 9.0 4.1 2.8 0.3 18.44 20.60 G05 2006 525 

n 25 12.5 ARB2 NIR 16 11.5 5.5 4.0 0.3 22.38 25.33 G05 2007 525 

n 30 12.5 ARB2 NIR 16 11.5 5.0 3.7 0.3 27.59 30.24 G05 2008 525 

n 35 12.5 ARB2 NIR 16 11.5 5.0 3.9 0.2 32.39 35.04 G05 2009 525 

n 40 12.5 ARB2 NIR 16 11.5 6.3 5.1 0.4 37.24 40.09 G05 2010 525 

n 45 12.5 ARB2 NIR 16 11.5 5.5 4.4 0.3 42.51 45.02 G05 2011 525 

n 50 12.5 ARB2 NIR 16 11.5 5.0 4.1 0.3 47.65 50.01 G05 2012 525 

n 60 12.5 ARB2 NIR 16 11.5 5.3 4.5 0.3 57.69 59.99 G05 2013 525 

n 80 12.5 ARB2 NIR 16 11.5 5.5 5.1 0.2 77.57 79.94 G05 2014 525 

n 100 12.5 ARB2 NIR 16 11.5 5.3 4.8 0.2 97.81 99.99 G05 2015 525 

n 300 12.5 ARB2 NIR 16 11.5 4.0 3.8 0.1 297.57 299.85 G05 2016 525 

Í 40 18 ARB2 NIR 25 17.0 7.0 4.5 0.6 36.04 40.16 G06 3127 525 

Í 50 18 ARB2 NIR 25 17.0 6.5 4.6 0.3 45.95 50.04 G06 3125 525 

Í 60 18 ARB2 NIR 25 17.0 6.0 4.4 0.2 56.33 60.11 G06 3126 525 

Í 80 18 ARB2 NIR 25 17.0 5.8 4.6 0.2 76.62 80.13 G06 3128 525 

Í 100 18 ARB2 NIR 25 17.0 5.8 4.8 0.1 96.43 100.11 G06 3129 525 

Í 50 22.4 ARB2 NIR 25 21.4 7.5 5.2 0.4 45.76 50.04 G06 3141 525 

Í 60 22.4 ARB2 NIR 25 21.4 7.0 5.1 0.4 56.74 60.47 G06 3142 525 

Í 80 22.4 ARB2 NIR 25 21.4 7.0 5.1 0.6 77.05 80.34 G06 3143 525 

Í 100 22.4 ARB2 NIR 25 21.4 9.0 7.5 0.5 95.89 100.16 G06 3144 525 

Í 140 22.4 ARB2 NIR 25 21.4 8.0 6.9 0.4 136.20 140.07 G06 3146 525 

Í 200 22.4 ARB2 NIR 25 21.4 6.0 5.2 0.2 197.38 200.26 G06 3148 525 

Í 500 22.4 ARB2 NIR 25 21.4 6.0 5.7 0.1 495.99 499.43 G06 3149 525 

Í 60 25.4 ARB2 NIR 30 24 8.9 6.2 0.7 55.47 60.10 G06 3212 525 

Í 80 25.4 ARB2 NIR 30 24 7.0 4.6 0.8 77.05 80.34 G06 3213 525 

Í 100 25.4 ARB2 NIR 30 24 9.0 7.1 0.6 95.89 100.16 G06 3214 525 

Í 120 25.4 ARB2 NIR 30 24 7.0 5.4 0.5 116.77 120.10 G06 3215 525 

Í 140 25.4 ARB2 NIR 30 24 8.0 6.6 0.5 136.20 140.07 G06 3235 525 

Í 160 25.4 ARB2 NIR 30 24 8.6 7.4 0.4 155.95 160.00 G06 3236 525 

Í 200 25.4 ARB2 NIR 30 24 6.0 5.0 0.3 197.38 200.26 G06 3237 525 

Í 300 25.4 ARB2 NIR 30 24 7.0 6.4 0.2 297.19 300.23 G06 3238 525 

Í 500 25.4 ARB2 NIR 30 24 6.0 5.5 0.1 495.99 499.43 G06 3239 525 

Í 80 31.5 ARB2 NIR 35 30 10.5 6.7 1.2 74.84 80.10 G06 3200 525 

Í 100 31.5 ARB2 NIR 35 30 9.5 6.5 1.0 95.34 100.09 G06 3201 525 

Í 120 31.5 ARB2 NIR 35 30 9.5 7.0 0.8 115.60 119.91 G06 3202 525 

Í 140 31.5 ARB2 NIR 35 30 8.0 5.9 0.7 136.20 140.07 G06 3203 525 

Í 150 31.5 ARB2 NIR 35 30 8.6 6.6 0.7 145.85 150.03 G06 3232 525 

Í 160 31.5 ARB2 NIR 35 30 8.6 6.7 0.6 155.95 160.00 G06 3204 525 

Í 200 31.5 ARB2 NIR 35 30 7.0 5.5 0.4 197.21 200.41 G06 3205 525 

Í 250 31.5 ARB2 NIR 35 30 7.0 5.8 0.4 247.42 250.45 G06 3206 525 

Í 300 31.5 ARB2 NIR 35 30 7.0 6.0 0.3 297.19 300.23 G06 3207 525 

Í 400 31.5 ARB2 NIR 35 30 7.0 6.3 0.2 397.05 400.08 G06 3208 525 

Í 600 31.5 ARB2 NIR 35 30 7.0 6.5 0.2 597.30 600.34 G06 3209 525 

Í 1330 31.5 ARB2 NIR 35 30 6.6 6.4 0.1 1326.3 1329.4 G06 3210 525 




400 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500



A closer look 










401

Singlets 

Achromats, Positive from 40 mm diameter, unmounted 


aberration 







ARB2 VIS 


(488/514 nm) 



Diameter 

(mm) 



Ø Tolerance 

(mm) 

40-80 5x0.4 -0.08 ±0.2 

100 5x0.63 -0.09 ±0.2 

150 5x1.0 -0.11 ±0.4 


dm Tolerance 

(mm) 

Achromats, Positive from 40 mm diameter, unmounted 

f' (mm) Ø (mm) Coating dm (mm) dr (mm) h' (mm) s' 546nm 

(mm) f' 546nm 

(mm) Order-No 

90 40 ARB2 VIS 14.3 9.8 0.8 81.78 89.98 G32 2389 000 

120 40 ARB2 VIS 13.0 9.7 0.9 113.60 119.99 G32 2388 000 

160 40 ARB2 VIS 11.7 9.0 0.8 154.64 160.21 G32 2384 000 

180 40 ARB2 VIS 10.8 8.2 0.4 174.92 181.66 G32 2246 000 

200 40 ARB2 VIS 10.0 7.7 0.4 195.34 201.26 G32 2293 000 

250 40 ARB2 VIS 9.5 7.6 0.6 245.52 249.91 G32 2294 000 

300 40 ARB2 VIS 11.0 9.4 0.5 294.78 300.09 G32 2295 000 

400 40 ARB2 VIS 9.0 7.8 0.4 396.15 400.17 G32 2296 000 

450 40 ARB2 VIS 9.0 8.1 0.2 443.65 448.48 G32 2297 000 

80 50 ARB2 VIS 20.0 11.9 1.7 69.05 80.14 G32 2301 000 

100 50 ARB2 VIS 17.5 11.2 1.4 92.03 101.57 G32 2302 000 

120 50 ARB2 VIS 15.5 10.3 1.1 112.88 121.36 G32 2303 000 

200 50 ARB2 VIS 12.5 8.9 0.6 193.70 201.27 G32 2304 000 

300 50 ARB2 VIS 12.0 9.6 0.7 294.31 300.18 G32 2305 000 

160 50.8 ARB2 VIS 13.5 8.6 1.5 152.76 159.49 G32 2310 000 

250 50.8 ARB2 VIS 11.5 8.4 1.0 244.65 250.10 G32 2311 000 

400 50.8 ARB2 VIS 10.5 8.6 0.6 395.59 400.33 G32 2312 000 

150 63 ARB2 VIS 21.0 13.9 1.3 138.30 150.44 G32 2383 000 

400 63 ARB2 VIS 14.0 11.0 0.9 394.07 400.65 G32 2229 000 

500 63 ARB2 VIS 13.0 10.7 0.7 494.65 500.39 G32 2230 000 

600 63 ARB2 VIS 12.5 10.5 0.6 594.75 600.18 G32 2231 000 

800 63 ARB2 VIS 13.0 11.5 0.5 796.93 802.79 G32 2232 000 

160 80 ARB2 VIS 29.0 18.8 2.1 144.45 160.10 G32 2267 000 

310 80 ARB2 VIS 18.5 12.3 1.9 301.50 310.35 G32 2278 000 

500 80 ARB2 VIS 16.0 12.2 1.2 493.20 500.64 G32 2279 000 

1000 80 ARB2 VIS 17.0 15.1 0.4 990.68 1000.06 G32 2241 000 

1185 80 ARB2 VIS 16.0 14.4 0.2 1182.40 1189.46 G32 2242 000 

500 100 ARB2 VIS 22.0 16.0 1.9 488.87 499.43 G32 2316 000 

1000 100 ARB2 VIS 21.5 18.5 0.6 988.52 1000.36 G32 2313 000 

1250 150 ARB2 VIS 35.0 29.4 1.8 1234.28 1250.0 G32 2387 000 

402 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500













Tolerances: 



High quality 

Our achromatic lenses feature extremely 

narrow focal lengths, minimal 

chromatic and spherical aberration 

and minimal wave front 

distortion (between λ/4 and λ/10). 

This is made possible by a combination 

of high-quality materials 

from established manufacturers, 

narrow production tolerances, 

and the latest in production technology, 

such as laser centering. 

Extrem narrow 

manufacturing tolerances 

(diameter, center thickness, 

centering accussary...) 

Extrem low optical 

manufacturing tolerances 

(surface accuraccy and 

surface quality) 

High quality materials from 

established manufacturers 

(SCHOTT, Ohara e.g.) 


403

Singlets 

Achromats NIR, Positive from 40 mm diameter, 

unmounted 


aberration 







ARB2 NIR 


(488/514 nm) 



Diameter 

(mm) 



Ø Tolerance 

(mm) 

40-50 5x0.4 -0.07 ±0.2 

50.8-80 5x0.4 -0.08 ±0.2 

100 5x0.63 -0.19 ±0.2 

dm Tolerance 

(mm) 











Tolerances: 



Achromats NIR, Positive from 40 mm diameter, unmounted 

f' 

(mm) 

Ø 

(mm) 

Coating 

Centering 

Accuracy 

dm 

(mm) 

dr 

(mm) 

h' 

(mm) 

s 546nm 

 

(mm) 

s' 546nm 

 

(mm) 

f' 546nm 

 

(mm) 

f' 1064nm 

 

(mm) 

Order-No 

90 40 ARB2NIR 6' 14.30 9.80 0.80 89.07 81.78 89.98 90.83 G32 2389 525 

120 40 ARB2NIR 6' 13.00 9.70 0.90 118.07 113.60 119.99 120.96 G32 2388 525 

160 40 ARB2NIR 3' 11.70 9.00 0.80 158.50 154.64 160.21 161.35 G32 2384 525 

180 40 ARB2NIR 3' 10.80 8.20 0.40 181.42 174.92 181.66 183.18 G32 2246 525 

200 40 ARB2NIR 3' 10.00 7.70 0.40 200.72 195.34 201.26 203.02 G32 2293 525 

250 40 ARB2NIR 3' 9.50 7.60 0.60 248.21 245.52 249.91 251.70 G32 2294 525 

300 40 ARB2NIR 3' 11.00 9.40 0.50 298.29 294.78 300.09 302.77 G32 2295 525 

400 40 ARB2NIR 3' 9.00 7.80 0.40 398.48 396.15 400.17 402.97 G32 2296 525 

450 40 ARB2NIR 3' 9.00 8.10 0.20 447.64 443.65 448.48 451.20 G32 2297 525 

80 50 ARB2NIR 3' 20.00 11.90 1.70 78.68 69.05 80.14 80.65 G32 2301 525 

100 50 ARB2NIR 3' 17.50 11.20 1.40 100.24 92.03 101.57 102.06 G32 2302 525 

120 50 ARB2NIR 3' 15.50 10.30 1.10 120.26 112.88 121.36 121.82 G32 2303 525 

200 50 ARB2NIR 2' 12.50 8.90 0.60 200.72 193.70 201.27 203.05 G32 2304 525 

300 50 ARB2NIR 2' 12.00 9.60 0.70 298.27 294.31 300.18 302.86 G32 2305 525 

160 50.8 ARB2NIR 3' 13.50 8.60 1.50 157.43 152.76 159.49 160.72 G32 2310 525 

250 50.8 ARB2NIR 2' 11.50 8.40 1.00 248.14 244.65 250.10 251.90 G32 2311 525 

400 50.8 ARB2NIR 2' 10.50 8.60 0.60 398.27 395.59 400.33 403.14 G32 2312 525 

150 63 ARB2NIR 3' 21.00 13.90 1.30 149.32 138.30 150.44 151.51 G32 2383 525 

400 63 ARB2NIR 2' 14.00 11.00 0.90 398.27 394.07 400.65 403.48 G32 2229 525 

500 63 ARB2NIR 2' 13.00 10.70 0.70 497.91 494.65 500.39 503.90 G32 2230 525 

310 80 ARB2NIR 3' 18.50 12.30 1.90 307.28 301.50 310.35 312.69 G32 2278 525 

500 80 ARB2NIR 2' 16.00 12.20 1.20 497.87 493.20 500.64 504.17 G32 2279 525 

1000 100 ARB2NIR 1' 21.50 18.50 0.60 998.48 988.52 1000.36 1007.49 G32 2313 525 

404 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500


UV-VIS Achromats, mounted 

• Best focusing in the wavelength rage 

UV-VIS, 240-700 nm 

• Correction of spherical aberration and 

astigmatism 

• Tight focal length tolerance better 

than ±1% 

• Achromats in Microbench Í mounts 

fitting directly to the LINOS system 


• Uncemented doublets with air space 

• Calcium fluoride and UV fused silica 

elements 


230-700 nm 

• Damage threshold: 2 J/cm 2 ; 9 ns 

(1000-on-1) 

• Best surface quality for minimum 

straylight 











Tolerances: 



UV-VIS Achromats, mounted 

f' 

(mm) 

Mount, 

outer Ø 

D(mm) 

Clear Ø, 

Mount 

(mm) 

F-number 

s' 193 nm 

 

(mm) 

s' 248 nm 

 

(mm) 

s' 546 nm 

 

(mm) 

f' 193 nm 

 

(mm) 

f' 248 nm 

 

(mm) 

f' 546 nm 

 

(mm) 

Order-No 

Í 50 25 6.4 7.8 46.9 46.1 46.1 50.5 49.8 49.9 G03 3500 000 

Í 80 25 11 7.3 75.5 74.2 74.1 81.3 80 80 G03 3501 000 

Í 160 30 20.6 7.8 153 150.5 150.4 162.4 160 160.1 G03 3502 000 

Í 200 35 26 7.7 192.2 188.6 188.3 203.4 200.1 200 G03 3503 000 

Í In mount fitting directly to Microbench 

High quality 

Qioptiq uses glass from established manufacturers in the production 

of fine optics components. This ensures the consistent high quality of 

our lenses, achromatic lenses and plano-optics. 


405

Singlets 

Achromats, Negative 


aberration 

• Minimal sphericalaberration/ 

wavefront distortion 


• Mounted or unmounted 

• Achromats in Nanobench n and 

Microbench Í mounts fitting directly 

to these LINOS systems 



ARB2 VIS 


(488/514 nm) 



Diameter 

(mm) 



Ø Tolerance 

(mm) 

6-12.5 3x0.1 -0.05 ±0.2 

18-31.5 3x0.16 -0.07 ±0.2 

Centering accuracy: all 3‘ 

dm Tolerance 

(mm) 











Tolerances: 



Achromats, Negative, unmounted 

f` (mm) Ø (mm) dm(mm) dr (mm) h` (mm) s`588nm 

(mm) f`546nm 

(mm) Order-No 

-10 6 2.8 3.7 0.2 -11.27 -10.01 G32 5210 000 

-20 8 2.8 3.6 0.1 -21.22 -20.08 G32 5220 000 

-35 12.5 3.2 4.3 0.3 -36.33 -34.96 G32 5211 000 

-50 12.5 4.0 4.9 0.3 -51.46 -49.97 G32 5214 000 

-50 18 4.7 6.6 0.5 -52.37 -50.48 G32 5221 000 

-75 22.4 5.8 7.8 0.6 -77.40 -75.14 G32 5223 000 

-100 31.5 7.8 10.7 0.9 -103.82 -100.69 G32 5222 000 





406 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500



Achromats, Negative, mounted 

f` (mm) 

Optics-Ø 

(mm) 

Mount 

Outer-Ø 

D(mm) 

Clear-Ø 

(mm) 

dm 

(mm) 

dr 

(mm) 

h` 

(mm) 

s`588nm 

 

(mm) 

f`546nm 

 

(mm) 

Order-No 

-10 6 n 16 5 2.8 3.7 0.2 -11.27 -10.01 G05 2018 000 

-20 8 n 16 7 2.8 3.6 0.1 -21.22 -20.08 G05 2017 000 

-35 12.5 n 16 11 3.2 4.3 0.3 -36.33 -34.96 G05 2019 000 

-50 12.5 n 16 11 4.0 4.9 0.3 -51.46 -49.97 G05 2020 000 

-50 18 Í 25 17 4.7 6.6 0.5 -52.37 -50.48 G06 3191 000 

-75 22.4 Í 25 21.4 5.8 7.8 0.6 -77.40 -75.14 G06 3100 000 

-100 31.5 Í 35 30 7.8 10.7 0.9 -103.82 -100.69 G06 3271 000 




A closer look 










407

Singlets 

Condenser combination, f = 16 mm, crown glass 

• For uniform illumination 

• For use as collimators in large focal 

ratio illumination systems 

• Supplied in CL-mounts, Ø 25 mm, 

21.4mm clear-aperture 

• Microbench-compatible 

• Re-arrangeable lens elements (see 

illustrations; all tools required are 

included) 

• Consisting of: 2 plano-convex lenses 

f= 40 mm (G31 2314 000), 1 concaveconvex 

lens f = 50 mm (G31 5505 000) 

λ 588 nm 

: f = 16 mm f = 20 mm f = 21.2 mm 

λ 588 nm 

: f = 22.5 mm f = 40 mm f = 50 mm 

Condenser combination, f = 16 mm, crown glass 

Product 

Order-No 

Condenser combination, f = 16 mm, crown glass G06 3010 000 

Condenser combination, f = 16 mm, fused silica 

• For uniform illumination 

• For use as collimators in large focal 

ratio illumination systems 

• High transmittance in the UV 

• Supplied in CL-mounts, Ø 25 mm, 

21.4mm clear-aperture, Microbenchcompatible 

• Re-arrangeable lens elements (see 

illustrations; all tools required are 

included) 

• Consisting of: 2 plano-convex lenses 

f =40 mm (G31 2286 000), 1 concaveconvex 

f = 50 mm (G31 5506 000) 

λ 258 nm 

: f = 16 mm f = 19,7 . mm f = 20,5 . mm 

λ 588 nm 

: f = 17.2 mm f = 21.6 mm f = 22.5 mm 

λ 258 nm 

: f = 22,5 . mm f = 40 mm f = 50 mm 

λ 588 nm 

: f = 24.6 mm f = 43 mm f = 55 mm 

Condenser combination, f = 16 mm, fused silica 

Product 

Order-No 

Condenser combination, f = 16 mm, fused silica G06 3011 000 

408 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500


Fiber light guide with condenser 

• Exchangeable lenses 

• Assembled with Microbench 

components 

• Fits to lamphouse 

• Accepts Ø 50 mm filters 

• Equipped with M55x0.75 internal 

thread 

• Includes two aspherical lenses 

• Includes silicate glass fiberoptic cable 

(Ø 4 mm fiber bundle, 500 mm length) 

• Supplied with KG1 heat-absorbing 

filter 


Fiber light guide with condenser 

Product 

Order-No 

Fiber light guide with condenser G03 0129 000 

Q-enabled 

Qioptiq develops and constructs beam control 

systems for refractive eye surgery as 

well as illumination, measuring and imaging 

units for diagnostic appliances. Qioptiq‘ 

high competence in the field of optics 

contributes significantly to the generation 

of improved retina and cornea images. Qioptiq 

offers solutions for: 

• Retinal Diagnosis 

• Ophthalmic measurements 

• Ophthalmic surgery. 

Our specialists will be pleased to provide 

you with more details. 


409

Singlets 

Hyperchromats 

Hyperchromatic Lenses 

Chromatic aberrations in optical systems 

generally lead to undesirable imaging 

aberrations, and are usually suppressed 

to a great extent through a carefully 

chosen combination of optical media. In 

a hyperchromatic system, on the other 

hand, one chromatic aberration – namely 

the axial chromatic aberration – is 

maximized. Thus the longitudinal 

chromatic aberration in such systems, far 

from being an error, is exactly what gives 

the hyperchromatic system its special 

properties, opening up a wide variety of 

application options particularly in the 

field of confocal-chromatic metrology. 

• Series of four systems 

• Numerical Aperture values 2.8 and 5.6 

• Outer diameter compatible with 

Microbench or Nanobench 

• Excellent monochromatic imaging 

performance 

• Two-lens system (non-cemented) 

• Spherical aberration and coma 

corrected 

• Optimized for infinite object distance 

• Maximized longitudinal chromatic 

aberration 

• Axial wavelength splitting 

• For use in confocal-chromatic sensors 

• Application options over broad 

spectral range 

• Consistently high image quality 

• Total transmission > 90 % from 420 nm 

to 1000 nm 

Hyperchromats 

Mount 

f' 546nm 

 

(mm) 

Outer- 

ØD 

(mm) 

Clear- 

Ø 

(mm) 

s' 405nm 

 

(mm) 

s' 480nm 

 

(mm) 

s' 546nm 

 

(mm) 

s' 588nm 

 

(mm) 

s' 644nm 

 

(mm) 

s' 852nm 

 

(mm) 

s' 1014nm 

 

(mm) 

Order-No 

Í 50 25 18 40.6 43.1 44.4 45.0 45.6 46.9 47.5 G03 3101 000 

Í 100 25 18 87.0 92.2 94.9 96.1 97.4 100.0 101.1 G03 3102 000 

n 25 16 9 19.4 20.6 21.3 21.6 21.9 22.5 22.8 G03 3103 000 

n 50 16 9 42.7 45.3 46.6 47.2 47.8 49.1 49.7 G03 3104 000 

Í In mount fitting directly to Microbench 

n In mount fitting directly to Nanobench 

410 

US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500

The LINOS Achromats and Lens Systems - Qioptiq Q-Shop

Create successful ePaper yourself

Delete template?

Save as template?