Ripple tank - Serrata Science Equipment

WAVES, VIBRATIONS AND SOUND
Function Generator DC Amplifier
The function generator has a broad frequency range and
a built-in power amplifier. The frequency range is divided
into eight regions which can be adjusted and read off the
adjustment knob scale. It is possible to perform frequency
modulation (FM) and external control of frequency.
The function generator is well-suited for use by both students
and teachers.
2500.50
2500.50 Function generator
● Sine, triangular and square wave signals.
● Short-circuit protected inputs.
● 10 W external/internal power amplifier.
● TTL signal output.
● FM modulation and frequency sweep within the
performance range.
Function generator - technical specifications:
Instrument
Function Generator
DC Amplifier
Function Generator
DC Amplifier
Frequency Counter
Frequency region
0,1 Hz – 1 Hz
1 Hz – 10 Hz
10 Hz – 100 Hz
100 Hz – 1000 Hz
1 kHz – 10 kHz
10 kHz – 100 kHz
100 kHz – 1000 kHz
1 MHz – 10 MHz
0,1 Hz – 100 kHz in one range
Signal type
Sine, triangular, square wave
Sine, triangular, square wave
Signal output:
Output voltage
Output impedance
Distortion
±5.5 V pp and TTL 50 W < 1.3%
0-20 V pp 600 W typically 0.5 %
DC Amplifier
Frequency Range
Output Power
Output Voltage
Input Impedance
DC - 50 kHz at -3 dB
10 W RMS / 4 W
± 10 Vpp
10 K W
DC - 50 kHz at -3 dB
10 W RMS / 4W
± 10 Vpp
10 K W
Modulator:
Modulation signal FM
Input voltage, sweep
Sweep
± 0-5 V
± 10 Vpp
DC - 10 kHz
±0-5 V
Frequency counter:
Measuring region
Input impedance
Max. input
No
0.1 Hz - 150 kHz
200 k W
± 100 V
Computer output
Dimensions
No
297 x 225 x 118 mm
RS 232 C
297 x 225 x 118 mm
Order number
2500.50
2501.50
31